drivers/usb/gadget/udc/s3c2410_udc.h

   1 /*
   2  * linux/drivers/usb/gadget/s3c2410_udc.h
   3  * Samsung on-chip full speed USB device controllers
   4  *
   5  * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
   6  *      Additional cleanups by Ben Dooks <ben-linux@fluff.org>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  */
  13
  14 #ifndef _S3C2410_UDC_H
  15 #define _S3C2410_UDC_H
  16
  17 struct s3c2410_ep {
  18         struct list_head                queue;
  19         unsigned long                   last_io;        /* jiffies timestamp */
  20         struct usb_gadget               *gadget;
  21         struct s3c2410_udc              *dev;
  22         struct usb_ep                   ep;
  23         u8                              num;
  24
  25         unsigned short                  fifo_size;
  26         u8                              bEndpointAddress;
  27         u8                              bmAttributes;
  28
  29         unsigned                        halted : 1;
  30         unsigned                        already_seen : 1;
  31         unsigned                        setup_stage : 1;
  32 };
  33
  34
  35 /* Warning : ep0 has a fifo of 16 bytes */
  36 /* Don't try to set 32 or 64            */
  37 /* also testusb 14 fails  wit 16 but is */
  38 /* fine with 8                          */
  39 #define EP0_FIFO_SIZE            8
  40 #define EP_FIFO_SIZE            64
  41 #define DEFAULT_POWER_STATE     0x00
  42
  43 #define S3C2440_EP_FIFO_SIZE    128
  44
  45 static const char ep0name [] = "ep0";
  46
  47 static const char *const ep_name[] = {
  48         ep0name,                                /* everyone has ep0 */
  49         /* s3c2410 four bidirectional bulk endpoints */
  50         "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk",
  51 };
  52
  53 #define S3C2410_ENDPOINTS       ARRAY_SIZE(ep_name)
  54
  55 struct s3c2410_request {
  56         struct list_head                queue;          /* ep's requests */
  57         struct usb_request              req;
  58 };
  59
  60 enum ep0_state {
  61         EP0_IDLE,
  62         EP0_IN_DATA_PHASE,
  63         EP0_OUT_DATA_PHASE,
  64         EP0_END_XFER,
  65         EP0_STALL,
  66 };
  67
  68 static const char *ep0states[]= {
  69         "EP0_IDLE",
  70         "EP0_IN_DATA_PHASE",
  71         "EP0_OUT_DATA_PHASE",
  72         "EP0_END_XFER",
  73         "EP0_STALL",
  74 };
  75
  76 struct s3c2410_udc {
  77         spinlock_t                      lock;
  78
  79         struct s3c2410_ep               ep[S3C2410_ENDPOINTS];
  80         int                             address;
  81         struct usb_gadget               gadget;
  82         struct usb_gadget_driver        *driver;
  83         struct s3c2410_request          fifo_req;
  84         u8                              fifo_buf[EP_FIFO_SIZE];
  85         u16                             devstatus;
  86
  87         u32                             port_status;
  88         int                             ep0state;
  89
  90         unsigned                        got_irq : 1;
  91
  92         unsigned                        req_std : 1;
  93         unsigned                        req_config : 1;
  94         unsigned                        req_pending : 1;
  95         u8                              vbus;
  96         struct dentry                   *regs_info;
  97 };
  98 #define to_s3c2410(g)   (container_of((g), struct s3c2410_udc, gadget))
  99
 100 #endif