2 * drivers/usb/host/ehci-orion.c
4 * Tzachi Perelstein <tzachi@marvell.com>
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/mbus.h>
15 #include <linux/clk.h>
16 #include <linux/platform_data/usb-ehci-orion.h>
18 #include <linux/phy/phy.h>
19 #include <linux/of_device.h>
20 #include <linux/of_irq.h>
21 #include <linux/usb.h>
22 #include <linux/usb/hcd.h>
24 #include <linux/dma-mapping.h>
28 #define rdl(off) readl_relaxed(hcd->regs + (off))
29 #define wrl(off, val) writel_relaxed((val), hcd->regs + (off))
32 #define USB_CMD_RUN BIT(0)
33 #define USB_CMD_RESET BIT(1)
34 #define USB_MODE 0x1a8
35 #define USB_MODE_MASK GENMASK(1, 0)
36 #define USB_MODE_DEVICE 0x2
37 #define USB_MODE_HOST 0x3
38 #define USB_MODE_SDIS BIT(4)
39 #define USB_CAUSE 0x310
40 #define USB_MASK 0x314
41 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
42 #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
44 #define USB_PHY_PWR_CTRL 0x400
45 #define USB_PHY_TX_CTRL 0x420
46 #define USB_PHY_RX_CTRL 0x430
47 #define USB_PHY_IVREF_CTRL 0x440
48 #define USB_PHY_TST_GRP_CTRL 0x450
50 #define DRIVER_DESC "EHCI orion driver"
52 #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
54 struct orion_ehci_hcd
{
59 static const char hcd_name
[] = "ehci-orion";
61 static struct hc_driver __read_mostly ehci_orion_hc_driver
;
64 * Implement Orion USB controller specification guidelines
66 static void orion_usb_phy_v1_setup(struct usb_hcd
*hcd
)
68 /* The below GLs are according to the Orion Errata document */
70 * Clear interrupt cause and mask
78 wrl(USB_CMD
, rdl(USB_CMD
) | USB_CMD_RESET
);
79 while (rdl(USB_CMD
) & USB_CMD_RESET
);
82 * GL# USB-10: Set IPG for non start of frame packets
85 wrl(USB_IPG
, (rdl(USB_IPG
) & ~0x7f00) | 0xc00);
88 * GL# USB-9: USB 2.0 Power Control
91 wrl(USB_PHY_PWR_CTRL
, (rdl(USB_PHY_PWR_CTRL
) & ~0xc0)| 0x40);
94 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
95 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
97 wrl(USB_PHY_TX_CTRL
, (rdl(USB_PHY_TX_CTRL
) & ~0x78) | 0x202040);
100 * GL# USB-3 GL# USB-9: USB PHY Rx Control
101 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
102 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
104 wrl(USB_PHY_RX_CTRL
, (rdl(USB_PHY_RX_CTRL
) & ~0xc2003f0) | 0xc0000010);
107 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
108 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
110 wrl(USB_PHY_IVREF_CTRL
, (rdl(USB_PHY_IVREF_CTRL
) & ~0x80003 ) | 0x32);
113 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
114 * REG_FIFO_SQ_RST[15]=0
116 wrl(USB_PHY_TST_GRP_CTRL
, rdl(USB_PHY_TST_GRP_CTRL
) & ~0x8000);
119 * Stop and reset controller
121 wrl(USB_CMD
, rdl(USB_CMD
) & ~USB_CMD_RUN
);
122 wrl(USB_CMD
, rdl(USB_CMD
) | USB_CMD_RESET
);
123 while (rdl(USB_CMD
) & USB_CMD_RESET
);
126 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
127 * TBD: This need to be done after each reset!
128 * GL# USB-4 Setup USB Host mode
130 wrl(USB_MODE
, USB_MODE_SDIS
| USB_MODE_HOST
);
134 ehci_orion_conf_mbus_windows(struct usb_hcd
*hcd
,
135 const struct mbus_dram_target_info
*dram
)
139 for (i
= 0; i
< 4; i
++) {
140 wrl(USB_WINDOW_CTRL(i
), 0);
141 wrl(USB_WINDOW_BASE(i
), 0);
144 for (i
= 0; i
< dram
->num_cs
; i
++) {
145 const struct mbus_dram_window
*cs
= dram
->cs
+ i
;
147 wrl(USB_WINDOW_CTRL(i
), ((cs
->size
- 1) & 0xffff0000) |
148 (cs
->mbus_attr
<< 8) |
149 (dram
->mbus_dram_target_id
<< 4) | 1);
150 wrl(USB_WINDOW_BASE(i
), cs
->base
);
154 static const struct ehci_driver_overrides orion_overrides __initconst
= {
155 .extra_priv_size
= sizeof(struct orion_ehci_hcd
),
158 static int ehci_orion_drv_probe(struct platform_device
*pdev
)
160 struct orion_ehci_data
*pd
= dev_get_platdata(&pdev
->dev
);
161 const struct mbus_dram_target_info
*dram
;
162 struct resource
*res
;
164 struct ehci_hcd
*ehci
;
167 enum orion_ehci_phy_ver phy_version
;
168 struct orion_ehci_hcd
*priv
;
173 pr_debug("Initializing Orion-SoC USB Host Controller\n");
175 irq
= platform_get_irq(pdev
, 0);
178 "Found HC with no IRQ. Check %s setup!\n",
179 dev_name(&pdev
->dev
));
185 * Right now device-tree probed devices don't get dma_mask
186 * set. Since shared usb code relies on it, set it here for
187 * now. Once we have dma capability bindings this can go away.
189 err
= dma_coerce_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
193 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
194 regs
= devm_ioremap_resource(&pdev
->dev
, res
);
200 hcd
= usb_create_hcd(&ehci_orion_hc_driver
,
201 &pdev
->dev
, dev_name(&pdev
->dev
));
207 hcd
->rsrc_start
= res
->start
;
208 hcd
->rsrc_len
= resource_size(res
);
211 ehci
= hcd_to_ehci(hcd
);
212 ehci
->caps
= hcd
->regs
+ 0x100;
215 priv
= hcd_to_orion_priv(hcd
);
217 * Not all platforms can gate the clock, so it is not an error if
218 * the clock does not exists.
220 priv
->clk
= devm_clk_get(&pdev
->dev
, NULL
);
221 if (!IS_ERR(priv
->clk
))
222 clk_prepare_enable(priv
->clk
);
224 priv
->phy
= devm_phy_optional_get(&pdev
->dev
, "usb");
225 if (IS_ERR(priv
->phy
)) {
226 err
= PTR_ERR(priv
->phy
);
229 err
= phy_init(priv
->phy
);
233 err
= phy_power_on(priv
->phy
);
235 goto err_phy_power_on
;
239 * (Re-)program MBUS remapping windows if we are asked to.
241 dram
= mv_mbus_dram_info();
243 ehci_orion_conf_mbus_windows(hcd
, dram
);
246 * setup Orion USB controller.
248 if (pdev
->dev
.of_node
)
249 phy_version
= EHCI_PHY_NA
;
251 phy_version
= pd
->phy_version
;
253 switch (phy_version
) {
254 case EHCI_PHY_NA
: /* dont change USB phy settings */
257 orion_usb_phy_v1_setup(hcd
);
262 dev_warn(&pdev
->dev
, "USB phy version isn't supported.\n");
265 err
= usb_add_hcd(hcd
, irq
, IRQF_SHARED
);
269 device_wakeup_enable(hcd
->self
.controller
);
273 if (!IS_ERR(priv
->phy
))
274 phy_power_off(priv
->phy
);
276 if (!IS_ERR(priv
->phy
))
280 if (!IS_ERR(priv
->clk
))
281 clk_disable_unprepare(priv
->clk
);
284 dev_err(&pdev
->dev
, "init %s fail, %d\n",
285 dev_name(&pdev
->dev
), err
);
290 static int ehci_orion_drv_remove(struct platform_device
*pdev
)
292 struct usb_hcd
*hcd
= platform_get_drvdata(pdev
);
293 struct orion_ehci_hcd
*priv
= hcd_to_orion_priv(hcd
);
297 if (!IS_ERR(priv
->phy
)) {
298 phy_power_off(priv
->phy
);
302 if (!IS_ERR(priv
->clk
))
303 clk_disable_unprepare(priv
->clk
);
310 static const struct of_device_id ehci_orion_dt_ids
[] = {
311 { .compatible
= "marvell,orion-ehci", },
314 MODULE_DEVICE_TABLE(of
, ehci_orion_dt_ids
);
316 static struct platform_driver ehci_orion_driver
= {
317 .probe
= ehci_orion_drv_probe
,
318 .remove
= ehci_orion_drv_remove
,
319 .shutdown
= usb_hcd_platform_shutdown
,
321 .name
= "orion-ehci",
322 .of_match_table
= ehci_orion_dt_ids
,
326 static int __init
ehci_orion_init(void)
331 pr_info("%s: " DRIVER_DESC
"\n", hcd_name
);
333 ehci_init_driver(&ehci_orion_hc_driver
, &orion_overrides
);
334 return platform_driver_register(&ehci_orion_driver
);
336 module_init(ehci_orion_init
);
338 static void __exit
ehci_orion_cleanup(void)
340 platform_driver_unregister(&ehci_orion_driver
);
342 module_exit(ehci_orion_cleanup
);
344 MODULE_DESCRIPTION(DRIVER_DESC
);
345 MODULE_ALIAS("platform:orion-ehci");
346 MODULE_AUTHOR("Tzachi Perelstein");
347 MODULE_LICENSE("GPL v2");