2 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
5 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7 * A lot of code borrowed from the Linux xHCI driver.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
14 #include <linux/clk.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/usb/phy.h>
20 #include <linux/slab.h>
21 #include <linux/usb/xhci_pdriver.h>
24 #include "xhci-mvebu.h"
25 #include "xhci-rcar.h"
27 static struct hc_driver __read_mostly xhci_plat_hc_driver
;
29 static int xhci_plat_setup(struct usb_hcd
*hcd
);
30 static int xhci_plat_start(struct usb_hcd
*hcd
);
32 static const struct xhci_driver_overrides xhci_plat_overrides __initconst
= {
33 .extra_priv_size
= sizeof(struct xhci_hcd
),
34 .reset
= xhci_plat_setup
,
35 .start
= xhci_plat_start
,
38 static void xhci_plat_quirks(struct device
*dev
, struct xhci_hcd
*xhci
)
41 * As of now platform drivers don't provide MSI support so we ensure
42 * here that the generic code does not try to make a pci_dev from our
43 * dev struct in order to setup MSI
45 xhci
->quirks
|= XHCI_PLAT
;
48 /* called during probe() after chip reset completes */
49 static int xhci_plat_setup(struct usb_hcd
*hcd
)
51 struct device_node
*of_node
= hcd
->self
.controller
->of_node
;
54 if (of_device_is_compatible(of_node
, "renesas,xhci-r8a7790") ||
55 of_device_is_compatible(of_node
, "renesas,xhci-r8a7791")) {
56 ret
= xhci_rcar_init_quirk(hcd
);
61 return xhci_gen_setup(hcd
, xhci_plat_quirks
);
64 static int xhci_plat_start(struct usb_hcd
*hcd
)
66 struct device_node
*of_node
= hcd
->self
.controller
->of_node
;
68 if (of_device_is_compatible(of_node
, "renesas,xhci-r8a7790") ||
69 of_device_is_compatible(of_node
, "renesas,xhci-r8a7791"))
75 static int xhci_plat_probe(struct platform_device
*pdev
)
77 struct device_node
*node
= pdev
->dev
.of_node
;
78 struct usb_xhci_pdata
*pdata
= dev_get_platdata(&pdev
->dev
);
79 const struct hc_driver
*driver
;
80 struct xhci_hcd
*xhci
;
90 driver
= &xhci_plat_hc_driver
;
92 irq
= platform_get_irq(pdev
, 0);
96 /* Initialize dma_mask and coherent_dma_mask to 32-bits */
97 ret
= dma_set_coherent_mask(&pdev
->dev
, DMA_BIT_MASK(32));
100 if (!pdev
->dev
.dma_mask
)
101 pdev
->dev
.dma_mask
= &pdev
->dev
.coherent_dma_mask
;
103 dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(32));
105 hcd
= usb_create_hcd(driver
, &pdev
->dev
, dev_name(&pdev
->dev
));
109 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
110 hcd
->regs
= devm_ioremap_resource(&pdev
->dev
, res
);
111 if (IS_ERR(hcd
->regs
)) {
112 ret
= PTR_ERR(hcd
->regs
);
116 hcd
->rsrc_start
= res
->start
;
117 hcd
->rsrc_len
= resource_size(res
);
120 * Not all platforms have a clk so it is not an error if the
121 * clock does not exists.
123 clk
= devm_clk_get(&pdev
->dev
, NULL
);
125 ret
= clk_prepare_enable(clk
);
130 if (of_device_is_compatible(pdev
->dev
.of_node
,
131 "marvell,armada-375-xhci") ||
132 of_device_is_compatible(pdev
->dev
.of_node
,
133 "marvell,armada-380-xhci")) {
134 ret
= xhci_mvebu_mbus_init_quirk(pdev
);
139 device_wakeup_enable(hcd
->self
.controller
);
141 xhci
= hcd_to_xhci(hcd
);
143 xhci
->main_hcd
= hcd
;
144 xhci
->shared_hcd
= usb_create_shared_hcd(driver
, &pdev
->dev
,
145 dev_name(&pdev
->dev
), hcd
);
146 if (!xhci
->shared_hcd
) {
151 if ((node
&& of_property_read_bool(node
, "usb3-lpm-capable")) ||
152 (pdata
&& pdata
->usb3_lpm_capable
))
153 xhci
->quirks
|= XHCI_LPM_SUPPORT
;
155 if (HCC_MAX_PSA(xhci
->hcc_params
) >= 4)
156 xhci
->shared_hcd
->can_do_streams
= 1;
158 hcd
->usb_phy
= devm_usb_get_phy_by_phandle(&pdev
->dev
, "usb-phy", 0);
159 if (IS_ERR(hcd
->usb_phy
)) {
160 ret
= PTR_ERR(hcd
->usb_phy
);
161 if (ret
== -EPROBE_DEFER
)
165 ret
= usb_phy_init(hcd
->usb_phy
);
170 ret
= usb_add_hcd(hcd
, irq
, IRQF_SHARED
);
172 goto disable_usb_phy
;
174 ret
= usb_add_hcd(xhci
->shared_hcd
, irq
, IRQF_SHARED
);
176 goto dealloc_usb2_hcd
;
185 usb_phy_shutdown(hcd
->usb_phy
);
188 usb_put_hcd(xhci
->shared_hcd
);
192 clk_disable_unprepare(clk
);
200 static int xhci_plat_remove(struct platform_device
*dev
)
202 struct usb_hcd
*hcd
= platform_get_drvdata(dev
);
203 struct xhci_hcd
*xhci
= hcd_to_xhci(hcd
);
204 struct clk
*clk
= xhci
->clk
;
206 usb_remove_hcd(xhci
->shared_hcd
);
207 usb_phy_shutdown(hcd
->usb_phy
);
210 usb_put_hcd(xhci
->shared_hcd
);
213 clk_disable_unprepare(clk
);
219 #ifdef CONFIG_PM_SLEEP
220 static int xhci_plat_suspend(struct device
*dev
)
222 struct usb_hcd
*hcd
= dev_get_drvdata(dev
);
223 struct xhci_hcd
*xhci
= hcd_to_xhci(hcd
);
226 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
227 * to do wakeup during suspend. Since xhci_plat_suspend is currently
228 * only designed for system suspend, device_may_wakeup() is enough
229 * to dertermine whether host is allowed to do wakeup. Need to
230 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
231 * also applies to runtime suspend.
233 return xhci_suspend(xhci
, device_may_wakeup(dev
));
236 static int xhci_plat_resume(struct device
*dev
)
238 struct usb_hcd
*hcd
= dev_get_drvdata(dev
);
239 struct xhci_hcd
*xhci
= hcd_to_xhci(hcd
);
241 return xhci_resume(xhci
, 0);
244 static const struct dev_pm_ops xhci_plat_pm_ops
= {
245 SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend
, xhci_plat_resume
)
247 #define DEV_PM_OPS (&xhci_plat_pm_ops)
249 #define DEV_PM_OPS NULL
250 #endif /* CONFIG_PM */
253 static const struct of_device_id usb_xhci_of_match
[] = {
254 { .compatible
= "generic-xhci" },
255 { .compatible
= "xhci-platform" },
256 { .compatible
= "marvell,armada-375-xhci"},
257 { .compatible
= "marvell,armada-380-xhci"},
258 { .compatible
= "renesas,xhci-r8a7790"},
259 { .compatible
= "renesas,xhci-r8a7791"},
262 MODULE_DEVICE_TABLE(of
, usb_xhci_of_match
);
265 static struct platform_driver usb_xhci_driver
= {
266 .probe
= xhci_plat_probe
,
267 .remove
= xhci_plat_remove
,
271 .of_match_table
= of_match_ptr(usb_xhci_of_match
),
274 MODULE_ALIAS("platform:xhci-hcd");
276 static int __init
xhci_plat_init(void)
278 xhci_init_driver(&xhci_plat_hc_driver
, &xhci_plat_overrides
);
279 return platform_driver_register(&usb_xhci_driver
);
281 module_init(xhci_plat_init
);
283 static void __exit
xhci_plat_exit(void)
285 platform_driver_unregister(&usb_xhci_driver
);
287 module_exit(xhci_plat_exit
);
289 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
290 MODULE_LICENSE("GPL");