Linux 4.2.1
[linux/fpc-iii.git] / drivers / watchdog / shwdt.c
blob567458b137a67874be0195aeda205208ba03cd67
1 /*
2 * drivers/watchdog/shwdt.c
4 * Watchdog driver for integrated watchdog in the SuperH processors.
6 * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
13 * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
14 * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
16 * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
17 * Added expect close support, made emulated timeout runtime changeable
18 * general cleanups, add some ioctls
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
23 #include <linux/module.h>
24 #include <linux/moduleparam.h>
25 #include <linux/platform_device.h>
26 #include <linux/init.h>
27 #include <linux/types.h>
28 #include <linux/spinlock.h>
29 #include <linux/watchdog.h>
30 #include <linux/pm_runtime.h>
31 #include <linux/fs.h>
32 #include <linux/mm.h>
33 #include <linux/slab.h>
34 #include <linux/io.h>
35 #include <linux/clk.h>
36 #include <linux/err.h>
37 #include <asm/watchdog.h>
39 #define DRV_NAME "sh-wdt"
42 * Default clock division ratio is 5.25 msecs. For an additional table of
43 * values, consult the asm-sh/watchdog.h. Overload this at module load
44 * time.
46 * In order for this to work reliably we need to have HZ set to 1000 or
47 * something quite higher than 100 (or we need a proper high-res timer
48 * implementation that will deal with this properly), otherwise the 10ms
49 * resolution of a jiffy is enough to trigger the overflow. For things like
50 * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
51 * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
52 * necssary.
54 * As a result of this timing problem, the only modes that are particularly
55 * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
56 * overflow periods respectively.
58 * Also, since we can't really expect userspace to be responsive enough
59 * before the overflow happens, we maintain two separate timers .. One in
60 * the kernel for clearing out WOVF every 2ms or so (again, this depends on
61 * HZ == 1000), and another for monitoring userspace writes to the WDT device.
63 * As such, we currently use a configurable heartbeat interval which defaults
64 * to 30s. In this case, the userspace daemon is only responsible for periodic
65 * writes to the device before the next heartbeat is scheduled. If the daemon
66 * misses its deadline, the kernel timer will allow the WDT to overflow.
68 static int clock_division_ratio = WTCSR_CKS_4096;
69 #define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
71 #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
72 static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
73 static bool nowayout = WATCHDOG_NOWAYOUT;
74 static unsigned long next_heartbeat;
76 struct sh_wdt {
77 void __iomem *base;
78 struct device *dev;
79 struct clk *clk;
80 spinlock_t lock;
82 struct timer_list timer;
85 static int sh_wdt_start(struct watchdog_device *wdt_dev)
87 struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
88 unsigned long flags;
89 u8 csr;
91 pm_runtime_get_sync(wdt->dev);
92 clk_enable(wdt->clk);
94 spin_lock_irqsave(&wdt->lock, flags);
96 next_heartbeat = jiffies + (heartbeat * HZ);
97 mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
99 csr = sh_wdt_read_csr();
100 csr |= WTCSR_WT | clock_division_ratio;
101 sh_wdt_write_csr(csr);
103 sh_wdt_write_cnt(0);
106 * These processors have a bit of an inconsistent initialization
107 * process.. starting with SH-3, RSTS was moved to WTCSR, and the
108 * RSTCSR register was removed.
110 * On the SH-2 however, in addition with bits being in different
111 * locations, we must deal with RSTCSR outright..
113 csr = sh_wdt_read_csr();
114 csr |= WTCSR_TME;
115 csr &= ~WTCSR_RSTS;
116 sh_wdt_write_csr(csr);
118 #ifdef CONFIG_CPU_SH2
119 csr = sh_wdt_read_rstcsr();
120 csr &= ~RSTCSR_RSTS;
121 sh_wdt_write_rstcsr(csr);
122 #endif
123 spin_unlock_irqrestore(&wdt->lock, flags);
125 return 0;
128 static int sh_wdt_stop(struct watchdog_device *wdt_dev)
130 struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
131 unsigned long flags;
132 u8 csr;
134 spin_lock_irqsave(&wdt->lock, flags);
136 del_timer(&wdt->timer);
138 csr = sh_wdt_read_csr();
139 csr &= ~WTCSR_TME;
140 sh_wdt_write_csr(csr);
142 spin_unlock_irqrestore(&wdt->lock, flags);
144 clk_disable(wdt->clk);
145 pm_runtime_put_sync(wdt->dev);
147 return 0;
150 static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
152 struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
153 unsigned long flags;
155 spin_lock_irqsave(&wdt->lock, flags);
156 next_heartbeat = jiffies + (heartbeat * HZ);
157 spin_unlock_irqrestore(&wdt->lock, flags);
159 return 0;
162 static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
164 struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
165 unsigned long flags;
167 if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
168 return -EINVAL;
170 spin_lock_irqsave(&wdt->lock, flags);
171 heartbeat = t;
172 wdt_dev->timeout = t;
173 spin_unlock_irqrestore(&wdt->lock, flags);
175 return 0;
178 static void sh_wdt_ping(unsigned long data)
180 struct sh_wdt *wdt = (struct sh_wdt *)data;
181 unsigned long flags;
183 spin_lock_irqsave(&wdt->lock, flags);
184 if (time_before(jiffies, next_heartbeat)) {
185 u8 csr;
187 csr = sh_wdt_read_csr();
188 csr &= ~WTCSR_IOVF;
189 sh_wdt_write_csr(csr);
191 sh_wdt_write_cnt(0);
193 mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
194 } else
195 dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
196 "the watchdog\n");
197 spin_unlock_irqrestore(&wdt->lock, flags);
200 static const struct watchdog_info sh_wdt_info = {
201 .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
202 WDIOF_MAGICCLOSE,
203 .firmware_version = 1,
204 .identity = "SH WDT",
207 static const struct watchdog_ops sh_wdt_ops = {
208 .owner = THIS_MODULE,
209 .start = sh_wdt_start,
210 .stop = sh_wdt_stop,
211 .ping = sh_wdt_keepalive,
212 .set_timeout = sh_wdt_set_heartbeat,
215 static struct watchdog_device sh_wdt_dev = {
216 .info = &sh_wdt_info,
217 .ops = &sh_wdt_ops,
220 static int sh_wdt_probe(struct platform_device *pdev)
222 struct sh_wdt *wdt;
223 struct resource *res;
224 int rc;
227 * As this driver only covers the global watchdog case, reject
228 * any attempts to register per-CPU watchdogs.
230 if (pdev->id != -1)
231 return -EINVAL;
233 wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
234 if (unlikely(!wdt))
235 return -ENOMEM;
237 wdt->dev = &pdev->dev;
239 wdt->clk = devm_clk_get(&pdev->dev, NULL);
240 if (IS_ERR(wdt->clk)) {
242 * Clock framework support is optional, continue on
243 * anyways if we don't find a matching clock.
245 wdt->clk = NULL;
248 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
249 wdt->base = devm_ioremap_resource(wdt->dev, res);
250 if (IS_ERR(wdt->base))
251 return PTR_ERR(wdt->base);
253 watchdog_set_nowayout(&sh_wdt_dev, nowayout);
254 watchdog_set_drvdata(&sh_wdt_dev, wdt);
256 spin_lock_init(&wdt->lock);
258 rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
259 if (unlikely(rc)) {
260 /* Default timeout if invalid */
261 sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
263 dev_warn(&pdev->dev,
264 "heartbeat value must be 1<=x<=3600, using %d\n",
265 sh_wdt_dev.timeout);
268 dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
269 sh_wdt_dev.timeout, nowayout);
271 rc = watchdog_register_device(&sh_wdt_dev);
272 if (unlikely(rc)) {
273 dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
274 return rc;
277 init_timer(&wdt->timer);
278 wdt->timer.function = sh_wdt_ping;
279 wdt->timer.data = (unsigned long)wdt;
280 wdt->timer.expires = next_ping_period(clock_division_ratio);
282 dev_info(&pdev->dev, "initialized.\n");
284 pm_runtime_enable(&pdev->dev);
286 return 0;
289 static int sh_wdt_remove(struct platform_device *pdev)
291 watchdog_unregister_device(&sh_wdt_dev);
293 pm_runtime_disable(&pdev->dev);
295 return 0;
298 static void sh_wdt_shutdown(struct platform_device *pdev)
300 sh_wdt_stop(&sh_wdt_dev);
303 static struct platform_driver sh_wdt_driver = {
304 .driver = {
305 .name = DRV_NAME,
308 .probe = sh_wdt_probe,
309 .remove = sh_wdt_remove,
310 .shutdown = sh_wdt_shutdown,
313 static int __init sh_wdt_init(void)
315 if (unlikely(clock_division_ratio < 0x5 ||
316 clock_division_ratio > 0x7)) {
317 clock_division_ratio = WTCSR_CKS_4096;
319 pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
320 clock_division_ratio);
323 return platform_driver_register(&sh_wdt_driver);
326 static void __exit sh_wdt_exit(void)
328 platform_driver_unregister(&sh_wdt_driver);
330 module_init(sh_wdt_init);
331 module_exit(sh_wdt_exit);
333 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
334 MODULE_DESCRIPTION("SuperH watchdog driver");
335 MODULE_LICENSE("GPL");
336 MODULE_ALIAS("platform:" DRV_NAME);
338 module_param(clock_division_ratio, int, 0);
339 MODULE_PARM_DESC(clock_division_ratio,
340 "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
341 "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
343 module_param(heartbeat, int, 0);
344 MODULE_PARM_DESC(heartbeat,
345 "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
346 __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
348 module_param(nowayout, bool, 0);
349 MODULE_PARM_DESC(nowayout,
350 "Watchdog cannot be stopped once started (default="
351 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");