net: qrtr: Use sk_buff->cb in receive path
[linux/fpc-iii.git] / kernel / power / suspend_test.c
blob6a897e8b2a8886c99f7725d1215ab6fe742caf28
1 /*
2 * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
4 * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
6 * This file is released under the GPLv2.
7 */
9 #include <linux/init.h>
10 #include <linux/rtc.h>
12 #include "power.h"
15 * We test the system suspend code by setting an RTC wakealarm a short
16 * time in the future, then suspending. Suspending the devices won't
17 * normally take long ... some systems only need a few milliseconds.
19 * The time it takes is system-specific though, so when we test this
20 * during system bootup we allow a LOT of time.
22 #define TEST_SUSPEND_SECONDS 10
24 static unsigned long suspend_test_start_time;
25 static u32 test_repeat_count_max = 1;
26 static u32 test_repeat_count_current;
28 void suspend_test_start(void)
30 /* FIXME Use better timebase than "jiffies", ideally a clocksource.
31 * What we want is a hardware counter that will work correctly even
32 * during the irqs-are-off stages of the suspend/resume cycle...
34 suspend_test_start_time = jiffies;
37 void suspend_test_finish(const char *label)
39 long nj = jiffies - suspend_test_start_time;
40 unsigned msec;
42 msec = jiffies_to_msecs(abs(nj));
43 pr_info("PM: %s took %d.%03d seconds\n", label,
44 msec / 1000, msec % 1000);
46 /* Warning on suspend means the RTC alarm period needs to be
47 * larger -- the system was sooo slooowwww to suspend that the
48 * alarm (should have) fired before the system went to sleep!
50 * Warning on either suspend or resume also means the system
51 * has some performance issues. The stack dump of a WARN_ON
52 * is more likely to get the right attention than a printk...
54 WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
55 "Component: %s, time: %u\n", label, msec);
59 * To test system suspend, we need a hands-off mechanism to resume the
60 * system. RTCs wake alarms are a common self-contained mechanism.
63 static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
65 static char err_readtime[] __initdata =
66 KERN_ERR "PM: can't read %s time, err %d\n";
67 static char err_wakealarm [] __initdata =
68 KERN_ERR "PM: can't set %s wakealarm, err %d\n";
69 static char err_suspend[] __initdata =
70 KERN_ERR "PM: suspend test failed, error %d\n";
71 static char info_test[] __initdata =
72 KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
74 unsigned long now;
75 struct rtc_wkalrm alm;
76 int status;
78 /* this may fail if the RTC hasn't been initialized */
79 repeat:
80 status = rtc_read_time(rtc, &alm.time);
81 if (status < 0) {
82 printk(err_readtime, dev_name(&rtc->dev), status);
83 return;
85 rtc_tm_to_time(&alm.time, &now);
87 memset(&alm, 0, sizeof alm);
88 rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
89 alm.enabled = true;
91 status = rtc_set_alarm(rtc, &alm);
92 if (status < 0) {
93 printk(err_wakealarm, dev_name(&rtc->dev), status);
94 return;
97 if (state == PM_SUSPEND_MEM) {
98 printk(info_test, pm_states[state]);
99 status = pm_suspend(state);
100 if (status == -ENODEV)
101 state = PM_SUSPEND_STANDBY;
103 if (state == PM_SUSPEND_STANDBY) {
104 printk(info_test, pm_states[state]);
105 status = pm_suspend(state);
106 if (status < 0)
107 state = PM_SUSPEND_TO_IDLE;
109 if (state == PM_SUSPEND_TO_IDLE) {
110 printk(info_test, pm_states[state]);
111 status = pm_suspend(state);
114 if (status < 0)
115 printk(err_suspend, status);
117 test_repeat_count_current++;
118 if (test_repeat_count_current < test_repeat_count_max)
119 goto repeat;
121 /* Some platforms can't detect that the alarm triggered the
122 * wakeup, or (accordingly) disable it after it afterwards.
123 * It's supposed to give oneshot behavior; cope.
125 alm.enabled = false;
126 rtc_set_alarm(rtc, &alm);
129 static int __init has_wakealarm(struct device *dev, const void *data)
131 struct rtc_device *candidate = to_rtc_device(dev);
133 if (!candidate->ops->set_alarm)
134 return 0;
135 if (!device_may_wakeup(candidate->dev.parent))
136 return 0;
138 return 1;
142 * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
143 * at startup time. They're normally disabled, for faster boot and because
144 * we can't know which states really work on this particular system.
146 static const char *test_state_label __initdata;
148 static char warn_bad_state[] __initdata =
149 KERN_WARNING "PM: can't test '%s' suspend state\n";
151 static int __init setup_test_suspend(char *value)
153 int i;
154 char *repeat;
155 char *suspend_type;
157 /* example : "=mem[,N]" ==> "mem[,N]" */
158 value++;
159 suspend_type = strsep(&value, ",");
160 if (!suspend_type)
161 return 0;
163 repeat = strsep(&value, ",");
164 if (repeat) {
165 if (kstrtou32(repeat, 0, &test_repeat_count_max))
166 return 0;
169 for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++)
170 if (!strcmp(pm_labels[i], suspend_type)) {
171 test_state_label = pm_labels[i];
172 return 0;
175 printk(warn_bad_state, suspend_type);
176 return 0;
178 __setup("test_suspend", setup_test_suspend);
180 static int __init test_suspend(void)
182 static char warn_no_rtc[] __initdata =
183 KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
185 struct rtc_device *rtc = NULL;
186 struct device *dev;
187 suspend_state_t test_state;
189 /* PM is initialized by now; is that state testable? */
190 if (!test_state_label)
191 return 0;
193 for (test_state = PM_SUSPEND_MIN; test_state < PM_SUSPEND_MAX; test_state++) {
194 const char *state_label = pm_states[test_state];
196 if (state_label && !strcmp(test_state_label, state_label))
197 break;
199 if (test_state == PM_SUSPEND_MAX) {
200 printk(warn_bad_state, test_state_label);
201 return 0;
204 /* RTCs have initialized by now too ... can we use one? */
205 dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm);
206 if (dev) {
207 rtc = rtc_class_open(dev_name(dev));
208 put_device(dev);
210 if (!rtc) {
211 printk(warn_no_rtc);
212 return 0;
215 /* go for it */
216 test_wakealarm(rtc, test_state);
217 rtc_class_close(rtc);
218 return 0;
220 late_initcall(test_suspend);