?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
spi: spi-fsl-qspi: Fix return value check of devm_ioremap() in probe
[linux/fpc-iii.git] / drivers / usb / serial / cypress_m8.c
blob216edd5826cacdbfaf5bbe2903d372f235d229d7
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * USB Cypress M8 driver
4 *
5 * Copyright (C) 2004
6 * Lonnie Mendez (dignome@gmail.com)
7 * Copyright (C) 2003,2004
8 * Neil Whelchel (koyama@firstlight.net)
9 *
10 * See Documentation/usb/usb-serial.rst for more information on using this
11 * driver
12 *
13 * See http://geocities.com/i0xox0i for information on this driver and the
14 * earthmate usb device.
15 */
16
17 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
18 for linux. */
19 /* Thanks to cypress for providing references for the hid reports. */
20 /* Thanks to Jiang Zhang for providing links and for general help. */
21 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
22
23
24 #include <linux/kernel.h>
25 #include <linux/errno.h>
26 #include <linux/slab.h>
27 #include <linux/tty.h>
28 #include <linux/tty_driver.h>
29 #include <linux/tty_flip.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/spinlock.h>
33 #include <linux/usb.h>
34 #include <linux/usb/serial.h>
35 #include <linux/serial.h>
36 #include <linux/kfifo.h>
37 #include <linux/delay.h>
38 #include <linux/uaccess.h>
39 #include <asm/unaligned.h>
40
41 #include "cypress_m8.h"
42
43
44 static bool stats;
45 static int interval;
46 static bool unstable_bauds;
47
48 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
49 #define DRIVER_DESC "Cypress USB to Serial Driver"
50
51 /* write buffer size defines */
52 #define CYPRESS_BUF_SIZE 1024
53
54 static const struct usb_device_id id_table_earthmate[] = {
55 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
56 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
57 { } /* Terminating entry */
58 };
59
60 static const struct usb_device_id id_table_cyphidcomrs232[] = {
61 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
62 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
63 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
64 { } /* Terminating entry */
65 };
66
67 static const struct usb_device_id id_table_nokiaca42v2[] = {
68 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
69 { } /* Terminating entry */
70 };
71
72 static const struct usb_device_id id_table_combined[] = {
73 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
74 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
75 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
76 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
77 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
78 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
79 { } /* Terminating entry */
80 };
81
82 MODULE_DEVICE_TABLE(usb, id_table_combined);
83
84 enum packet_format {
85 packet_format_1, /* b0:status, b1:payload count */
86 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
87 };
88
89 struct cypress_private {
90 spinlock_t lock; /* private lock */
91 int chiptype; /* identifier of device, for quirks/etc */
92 int bytes_in; /* used for statistics */
93 int bytes_out; /* used for statistics */
94 int cmd_count; /* used for statistics */
95 int cmd_ctrl; /* always set this to 1 before issuing a command */
96 struct kfifo write_fifo; /* write fifo */
97 int write_urb_in_use; /* write urb in use indicator */
98 int write_urb_interval; /* interval to use for write urb */
99 int read_urb_interval; /* interval to use for read urb */
100 int comm_is_ok; /* true if communication is (still) ok */
101 __u8 line_control; /* holds dtr / rts value */
102 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
103 __u8 current_config; /* stores the current configuration byte */
104 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
105 enum packet_format pkt_fmt; /* format to use for packet send / receive */
106 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
107 int baud_rate; /* stores current baud rate in
108 integer form */
109 char prev_status; /* used for TIOCMIWAIT */
110 };
111
112 /* function prototypes for the Cypress USB to serial device */
113 static int cypress_earthmate_port_probe(struct usb_serial_port *port);
114 static int cypress_hidcom_port_probe(struct usb_serial_port *port);
115 static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
116 static int cypress_port_remove(struct usb_serial_port *port);
117 static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
118 static void cypress_close(struct usb_serial_port *port);
119 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
120 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
121 const unsigned char *buf, int count);
122 static void cypress_send(struct usb_serial_port *port);
123 static int cypress_write_room(struct tty_struct *tty);
124 static void cypress_earthmate_init_termios(struct tty_struct *tty);
125 static void cypress_set_termios(struct tty_struct *tty,
126 struct usb_serial_port *port, struct ktermios *old);
127 static int cypress_tiocmget(struct tty_struct *tty);
128 static int cypress_tiocmset(struct tty_struct *tty,
129 unsigned int set, unsigned int clear);
130 static int cypress_chars_in_buffer(struct tty_struct *tty);
131 static void cypress_throttle(struct tty_struct *tty);
132 static void cypress_unthrottle(struct tty_struct *tty);
133 static void cypress_set_dead(struct usb_serial_port *port);
134 static void cypress_read_int_callback(struct urb *urb);
135 static void cypress_write_int_callback(struct urb *urb);
136
137 static struct usb_serial_driver cypress_earthmate_device = {
138 .driver = {
139 .owner = THIS_MODULE,
140 .name = "earthmate",
141 },
142 .description = "DeLorme Earthmate USB",
143 .id_table = id_table_earthmate,
144 .num_ports = 1,
145 .port_probe = cypress_earthmate_port_probe,
146 .port_remove = cypress_port_remove,
147 .open = cypress_open,
148 .close = cypress_close,
149 .dtr_rts = cypress_dtr_rts,
150 .write = cypress_write,
151 .write_room = cypress_write_room,
152 .init_termios = cypress_earthmate_init_termios,
153 .set_termios = cypress_set_termios,
154 .tiocmget = cypress_tiocmget,
155 .tiocmset = cypress_tiocmset,
156 .tiocmiwait = usb_serial_generic_tiocmiwait,
157 .chars_in_buffer = cypress_chars_in_buffer,
158 .throttle = cypress_throttle,
159 .unthrottle = cypress_unthrottle,
160 .read_int_callback = cypress_read_int_callback,
161 .write_int_callback = cypress_write_int_callback,
162 };
163
164 static struct usb_serial_driver cypress_hidcom_device = {
165 .driver = {
166 .owner = THIS_MODULE,
167 .name = "cyphidcom",
168 },
169 .description = "HID->COM RS232 Adapter",
170 .id_table = id_table_cyphidcomrs232,
171 .num_ports = 1,
172 .port_probe = cypress_hidcom_port_probe,
173 .port_remove = cypress_port_remove,
174 .open = cypress_open,
175 .close = cypress_close,
176 .dtr_rts = cypress_dtr_rts,
177 .write = cypress_write,
178 .write_room = cypress_write_room,
179 .set_termios = cypress_set_termios,
180 .tiocmget = cypress_tiocmget,
181 .tiocmset = cypress_tiocmset,
182 .tiocmiwait = usb_serial_generic_tiocmiwait,
183 .chars_in_buffer = cypress_chars_in_buffer,
184 .throttle = cypress_throttle,
185 .unthrottle = cypress_unthrottle,
186 .read_int_callback = cypress_read_int_callback,
187 .write_int_callback = cypress_write_int_callback,
188 };
189
190 static struct usb_serial_driver cypress_ca42v2_device = {
191 .driver = {
192 .owner = THIS_MODULE,
193 .name = "nokiaca42v2",
194 },
195 .description = "Nokia CA-42 V2 Adapter",
196 .id_table = id_table_nokiaca42v2,
197 .num_ports = 1,
198 .port_probe = cypress_ca42v2_port_probe,
199 .port_remove = cypress_port_remove,
200 .open = cypress_open,
201 .close = cypress_close,
202 .dtr_rts = cypress_dtr_rts,
203 .write = cypress_write,
204 .write_room = cypress_write_room,
205 .set_termios = cypress_set_termios,
206 .tiocmget = cypress_tiocmget,
207 .tiocmset = cypress_tiocmset,
208 .tiocmiwait = usb_serial_generic_tiocmiwait,
209 .chars_in_buffer = cypress_chars_in_buffer,
210 .throttle = cypress_throttle,
211 .unthrottle = cypress_unthrottle,
212 .read_int_callback = cypress_read_int_callback,
213 .write_int_callback = cypress_write_int_callback,
214 };
215
216 static struct usb_serial_driver * const serial_drivers[] = {
217 &cypress_earthmate_device, &cypress_hidcom_device,
218 &cypress_ca42v2_device, NULL
219 };
220
221 /*****************************************************************************
222 * Cypress serial helper functions
223 *****************************************************************************/
224
225 /* FRWD Dongle hidcom needs to skip reset and speed checks */
226 static inline bool is_frwd(struct usb_device *dev)
227 {
228 return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
229 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
230 }
231
232 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
233 {
234 struct cypress_private *priv;
235 priv = usb_get_serial_port_data(port);
236
237 if (unstable_bauds)
238 return new_rate;
239
240 /* FRWD Dongle uses 115200 bps */
241 if (is_frwd(port->serial->dev))
242 return new_rate;
243
244 /*
245 * The general purpose firmware for the Cypress M8 allows for
246 * a maximum speed of 57600bps (I have no idea whether DeLorme
247 * chose to use the general purpose firmware or not), if you
248 * need to modify this speed setting for your own project
249 * please add your own chiptype and modify the code likewise.
250 * The Cypress HID->COM device will work successfully up to
251 * 115200bps (but the actual throughput is around 3kBps).
252 */
253 if (port->serial->dev->speed == USB_SPEED_LOW) {
254 /*
255 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
256 * Cypress app note that describes this mechanism
257 * states the the low-speed part can't handle more
258 * than 800 bytes/sec, in which case 4800 baud is the
259 * safest speed for a part like that.
260 */
261 if (new_rate > 4800) {
262 dev_dbg(&port->dev,
263 "%s - failed setting baud rate, device incapable speed %d\n",
264 __func__, new_rate);
265 return -1;
266 }
267 }
268 switch (priv->chiptype) {
269 case CT_EARTHMATE:
270 if (new_rate <= 600) {
271 /* 300 and 600 baud rates are supported under
272 * the generic firmware, but are not used with
273 * NMEA and SiRF protocols */
274 dev_dbg(&port->dev,
275 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
276 __func__, new_rate);
277 return -1;
278 }
279 break;
280 default:
281 break;
282 }
283 return new_rate;
284 }
285
286
287 /* This function can either set or retrieve the current serial line settings */
288 static int cypress_serial_control(struct tty_struct *tty,
289 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
290 int stop_bits, int parity_enable, int parity_type, int reset,
291 int cypress_request_type)
292 {
293 int new_baudrate = 0, retval = 0, tries = 0;
294 struct cypress_private *priv;
295 struct device *dev = &port->dev;
296 u8 *feature_buffer;
297 const unsigned int feature_len = 5;
298 unsigned long flags;
299
300 priv = usb_get_serial_port_data(port);
301
302 if (!priv->comm_is_ok)
303 return -ENODEV;
304
305 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
306 if (!feature_buffer)
307 return -ENOMEM;
308
309 switch (cypress_request_type) {
310 case CYPRESS_SET_CONFIG:
311 /* 0 means 'Hang up' so doesn't change the true bit rate */
312 new_baudrate = priv->baud_rate;
313 if (baud_rate && baud_rate != priv->baud_rate) {
314 dev_dbg(dev, "%s - baud rate is changing\n", __func__);
315 retval = analyze_baud_rate(port, baud_rate);
316 if (retval >= 0) {
317 new_baudrate = retval;
318 dev_dbg(dev, "%s - New baud rate set to %d\n",
319 __func__, new_baudrate);
320 }
321 }
322 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
323 new_baudrate);
324
325 /* fill the feature_buffer with new configuration */
326 put_unaligned_le32(new_baudrate, feature_buffer);
327 feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
328 /* 1 bit gap */
329 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
330 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
331 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
332 /* 1 bit gap */
333 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
334
335 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
336 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
337 feature_buffer[0], feature_buffer[1],
338 feature_buffer[2], feature_buffer[3],
339 feature_buffer[4]);
340
341 do {
342 retval = usb_control_msg(port->serial->dev,
343 usb_sndctrlpipe(port->serial->dev, 0),
344 HID_REQ_SET_REPORT,
345 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
346 0x0300, 0, feature_buffer,
347 feature_len, 500);
348
349 if (tries++ >= 3)
350 break;
351
352 } while (retval != feature_len &&
353 retval != -ENODEV);
354
355 if (retval != feature_len) {
356 dev_err(dev, "%s - failed sending serial line settings - %d\n",
357 __func__, retval);
358 cypress_set_dead(port);
359 } else {
360 spin_lock_irqsave(&priv->lock, flags);
361 priv->baud_rate = new_baudrate;
362 priv->current_config = feature_buffer[4];
363 spin_unlock_irqrestore(&priv->lock, flags);
364 /* If we asked for a speed change encode it */
365 if (baud_rate)
366 tty_encode_baud_rate(tty,
367 new_baudrate, new_baudrate);
368 }
369 break;
370 case CYPRESS_GET_CONFIG:
371 if (priv->get_cfg_unsafe) {
372 /* Not implemented for this device,
373 and if we try to do it we're likely
374 to crash the hardware. */
375 retval = -ENOTTY;
376 goto out;
377 }
378 dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
379 do {
380 retval = usb_control_msg(port->serial->dev,
381 usb_rcvctrlpipe(port->serial->dev, 0),
382 HID_REQ_GET_REPORT,
383 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
384 0x0300, 0, feature_buffer,
385 feature_len, 500);
386
387 if (tries++ >= 3)
388 break;
389 } while (retval != feature_len
390 && retval != -ENODEV);
391
392 if (retval != feature_len) {
393 dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
394 __func__, retval);
395 cypress_set_dead(port);
396 goto out;
397 } else {
398 spin_lock_irqsave(&priv->lock, flags);
399 /* store the config in one byte, and later
400 use bit masks to check values */
401 priv->current_config = feature_buffer[4];
402 priv->baud_rate = get_unaligned_le32(feature_buffer);
403 spin_unlock_irqrestore(&priv->lock, flags);
404 }
405 }
406 spin_lock_irqsave(&priv->lock, flags);
407 ++priv->cmd_count;
408 spin_unlock_irqrestore(&priv->lock, flags);
409 out:
410 kfree(feature_buffer);
411 return retval;
412 } /* cypress_serial_control */
413
414
415 static void cypress_set_dead(struct usb_serial_port *port)
416 {
417 struct cypress_private *priv = usb_get_serial_port_data(port);
418 unsigned long flags;
419
420 spin_lock_irqsave(&priv->lock, flags);
421 if (!priv->comm_is_ok) {
422 spin_unlock_irqrestore(&priv->lock, flags);
423 return;
424 }
425 priv->comm_is_ok = 0;
426 spin_unlock_irqrestore(&priv->lock, flags);
427
428 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
429 "interval might be too short\n", port->port_number);
430 }
431
432
433 /*****************************************************************************
434 * Cypress serial driver functions
435 *****************************************************************************/
436
437
438 static int cypress_generic_port_probe(struct usb_serial_port *port)
439 {
440 struct usb_serial *serial = port->serial;
441 struct cypress_private *priv;
442
443 if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
444 dev_err(&port->dev, "required endpoint is missing\n");
445 return -ENODEV;
446 }
447
448 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
449 if (!priv)
450 return -ENOMEM;
451
452 priv->comm_is_ok = !0;
453 spin_lock_init(&priv->lock);
454 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
455 kfree(priv);
456 return -ENOMEM;
457 }
458
459 /* Skip reset for FRWD device. It is a workaound:
460 device hangs if it receives SET_CONFIGURE in Configured
461 state. */
462 if (!is_frwd(serial->dev))
463 usb_reset_configuration(serial->dev);
464
465 priv->cmd_ctrl = 0;
466 priv->line_control = 0;
467 priv->rx_flags = 0;
468 /* Default packet format setting is determined by packet size.
469 Anything with a size larger then 9 must have a separate
470 count field since the 3 bit count field is otherwise too
471 small. Otherwise we can use the slightly more compact
472 format. This is in accordance with the cypress_m8 serial
473 converter app note. */
474 if (port->interrupt_out_size > 9)
475 priv->pkt_fmt = packet_format_1;
476 else
477 priv->pkt_fmt = packet_format_2;
478
479 if (interval > 0) {
480 priv->write_urb_interval = interval;
481 priv->read_urb_interval = interval;
482 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
483 __func__, interval);
484 } else {
485 priv->write_urb_interval = port->interrupt_out_urb->interval;
486 priv->read_urb_interval = port->interrupt_in_urb->interval;
487 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
488 __func__, priv->read_urb_interval,
489 priv->write_urb_interval);
490 }
491 usb_set_serial_port_data(port, priv);
492
493 port->port.drain_delay = 256;
494
495 return 0;
496 }
497
498
499 static int cypress_earthmate_port_probe(struct usb_serial_port *port)
500 {
501 struct usb_serial *serial = port->serial;
502 struct cypress_private *priv;
503 int ret;
504
505 ret = cypress_generic_port_probe(port);
506 if (ret) {
507 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
508 return ret;
509 }
510
511 priv = usb_get_serial_port_data(port);
512 priv->chiptype = CT_EARTHMATE;
513 /* All Earthmate devices use the separated-count packet
514 format! Idiotic. */
515 priv->pkt_fmt = packet_format_1;
516 if (serial->dev->descriptor.idProduct !=
517 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
518 /* The old original USB Earthmate seemed able to
519 handle GET_CONFIG requests; everything they've
520 produced since that time crashes if this command is
521 attempted :-( */
522 dev_dbg(&port->dev,
523 "%s - Marking this device as unsafe for GET_CONFIG commands\n",
524 __func__);
525 priv->get_cfg_unsafe = !0;
526 }
527
528 return 0;
529 }
530
531 static int cypress_hidcom_port_probe(struct usb_serial_port *port)
532 {
533 struct cypress_private *priv;
534 int ret;
535
536 ret = cypress_generic_port_probe(port);
537 if (ret) {
538 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
539 return ret;
540 }
541
542 priv = usb_get_serial_port_data(port);
543 priv->chiptype = CT_CYPHIDCOM;
544
545 return 0;
546 }
547
548 static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
549 {
550 struct cypress_private *priv;
551 int ret;
552
553 ret = cypress_generic_port_probe(port);
554 if (ret) {
555 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
556 return ret;
557 }
558
559 priv = usb_get_serial_port_data(port);
560 priv->chiptype = CT_CA42V2;
561
562 return 0;
563 }
564
565 static int cypress_port_remove(struct usb_serial_port *port)
566 {
567 struct cypress_private *priv;
568
569 priv = usb_get_serial_port_data(port);
570
571 kfifo_free(&priv->write_fifo);
572 kfree(priv);
573
574 return 0;
575 }
576
577 static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
578 {
579 struct cypress_private *priv = usb_get_serial_port_data(port);
580 struct usb_serial *serial = port->serial;
581 unsigned long flags;
582 int result = 0;
583
584 if (!priv->comm_is_ok)
585 return -EIO;
586
587 /* clear halts before open */
588 usb_clear_halt(serial->dev, 0x81);
589 usb_clear_halt(serial->dev, 0x02);
590
591 spin_lock_irqsave(&priv->lock, flags);
592 /* reset read/write statistics */
593 priv->bytes_in = 0;
594 priv->bytes_out = 0;
595 priv->cmd_count = 0;
596 priv->rx_flags = 0;
597 spin_unlock_irqrestore(&priv->lock, flags);
598
599 /* Set termios */
600 cypress_send(port);
601
602 if (tty)
603 cypress_set_termios(tty, port, NULL);
604
605 /* setup the port and start reading from the device */
606 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
607 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
608 port->interrupt_in_urb->transfer_buffer,
609 port->interrupt_in_urb->transfer_buffer_length,
610 cypress_read_int_callback, port, priv->read_urb_interval);
611 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
612
613 if (result) {
614 dev_err(&port->dev,
615 "%s - failed submitting read urb, error %d\n",
616 __func__, result);
617 cypress_set_dead(port);
618 }
619
620 return result;
621 } /* cypress_open */
622
623 static void cypress_dtr_rts(struct usb_serial_port *port, int on)
624 {
625 struct cypress_private *priv = usb_get_serial_port_data(port);
626 /* drop dtr and rts */
627 spin_lock_irq(&priv->lock);
628 if (on == 0)
629 priv->line_control = 0;
630 else
631 priv->line_control = CONTROL_DTR | CONTROL_RTS;
632 priv->cmd_ctrl = 1;
633 spin_unlock_irq(&priv->lock);
634 cypress_write(NULL, port, NULL, 0);
635 }
636
637 static void cypress_close(struct usb_serial_port *port)
638 {
639 struct cypress_private *priv = usb_get_serial_port_data(port);
640 unsigned long flags;
641
642 spin_lock_irqsave(&priv->lock, flags);
643 kfifo_reset_out(&priv->write_fifo);
644 spin_unlock_irqrestore(&priv->lock, flags);
645
646 dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
647 usb_kill_urb(port->interrupt_in_urb);
648 usb_kill_urb(port->interrupt_out_urb);
649
650 if (stats)
651 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
652 priv->bytes_in, priv->bytes_out, priv->cmd_count);
653 } /* cypress_close */
654
655
656 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
657 const unsigned char *buf, int count)
658 {
659 struct cypress_private *priv = usb_get_serial_port_data(port);
660
661 dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
662
663 /* line control commands, which need to be executed immediately,
664 are not put into the buffer for obvious reasons.
665 */
666 if (priv->cmd_ctrl) {
667 count = 0;
668 goto finish;
669 }
670
671 if (!count)
672 return count;
673
674 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
675
676 finish:
677 cypress_send(port);
678
679 return count;
680 } /* cypress_write */
681
682
683 static void cypress_send(struct usb_serial_port *port)
684 {
685 int count = 0, result, offset, actual_size;
686 struct cypress_private *priv = usb_get_serial_port_data(port);
687 struct device *dev = &port->dev;
688 unsigned long flags;
689
690 if (!priv->comm_is_ok)
691 return;
692
693 dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
694 port->interrupt_out_size);
695
696 spin_lock_irqsave(&priv->lock, flags);
697 if (priv->write_urb_in_use) {
698 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
699 spin_unlock_irqrestore(&priv->lock, flags);
700 return;
701 }
702 spin_unlock_irqrestore(&priv->lock, flags);
703
704 /* clear buffer */
705 memset(port->interrupt_out_urb->transfer_buffer, 0,
706 port->interrupt_out_size);
707
708 spin_lock_irqsave(&priv->lock, flags);
709 switch (priv->pkt_fmt) {
710 default:
711 case packet_format_1:
712 /* this is for the CY7C64013... */
713 offset = 2;
714 port->interrupt_out_buffer[0] = priv->line_control;
715 break;
716 case packet_format_2:
717 /* this is for the CY7C63743... */
718 offset = 1;
719 port->interrupt_out_buffer[0] = priv->line_control;
720 break;
721 }
722
723 if (priv->line_control & CONTROL_RESET)
724 priv->line_control &= ~CONTROL_RESET;
725
726 if (priv->cmd_ctrl) {
727 priv->cmd_count++;
728 dev_dbg(dev, "%s - line control command being issued\n", __func__);
729 spin_unlock_irqrestore(&priv->lock, flags);
730 goto send;
731 } else
732 spin_unlock_irqrestore(&priv->lock, flags);
733
734 count = kfifo_out_locked(&priv->write_fifo,
735 &port->interrupt_out_buffer[offset],
736 port->interrupt_out_size - offset,
737 &priv->lock);
738 if (count == 0)
739 return;
740
741 switch (priv->pkt_fmt) {
742 default:
743 case packet_format_1:
744 port->interrupt_out_buffer[1] = count;
745 break;
746 case packet_format_2:
747 port->interrupt_out_buffer[0] |= count;
748 }
749
750 dev_dbg(dev, "%s - count is %d\n", __func__, count);
751
752 send:
753 spin_lock_irqsave(&priv->lock, flags);
754 priv->write_urb_in_use = 1;
755 spin_unlock_irqrestore(&priv->lock, flags);
756
757 if (priv->cmd_ctrl)
758 actual_size = 1;
759 else
760 actual_size = count +
761 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
762
763 usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
764 port->interrupt_out_urb->transfer_buffer);
765
766 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
767 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
768 port->interrupt_out_buffer, actual_size,
769 cypress_write_int_callback, port, priv->write_urb_interval);
770 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
771 if (result) {
772 dev_err_console(port,
773 "%s - failed submitting write urb, error %d\n",
774 __func__, result);
775 priv->write_urb_in_use = 0;
776 cypress_set_dead(port);
777 }
778
779 spin_lock_irqsave(&priv->lock, flags);
780 if (priv->cmd_ctrl)
781 priv->cmd_ctrl = 0;
782
783 /* do not count the line control and size bytes */
784 priv->bytes_out += count;
785 spin_unlock_irqrestore(&priv->lock, flags);
786
787 usb_serial_port_softint(port);
788 } /* cypress_send */
789
790
791 /* returns how much space is available in the soft buffer */
792 static int cypress_write_room(struct tty_struct *tty)
793 {
794 struct usb_serial_port *port = tty->driver_data;
795 struct cypress_private *priv = usb_get_serial_port_data(port);
796 int room = 0;
797 unsigned long flags;
798
799 spin_lock_irqsave(&priv->lock, flags);
800 room = kfifo_avail(&priv->write_fifo);
801 spin_unlock_irqrestore(&priv->lock, flags);
802
803 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
804 return room;
805 }
806
807
808 static int cypress_tiocmget(struct tty_struct *tty)
809 {
810 struct usb_serial_port *port = tty->driver_data;
811 struct cypress_private *priv = usb_get_serial_port_data(port);
812 __u8 status, control;
813 unsigned int result = 0;
814 unsigned long flags;
815
816 spin_lock_irqsave(&priv->lock, flags);
817 control = priv->line_control;
818 status = priv->current_status;
819 spin_unlock_irqrestore(&priv->lock, flags);
820
821 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
822 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
823 | ((status & UART_CTS) ? TIOCM_CTS : 0)
824 | ((status & UART_DSR) ? TIOCM_DSR : 0)
825 | ((status & UART_RI) ? TIOCM_RI : 0)
826 | ((status & UART_CD) ? TIOCM_CD : 0);
827
828 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
829
830 return result;
831 }
832
833
834 static int cypress_tiocmset(struct tty_struct *tty,
835 unsigned int set, unsigned int clear)
836 {
837 struct usb_serial_port *port = tty->driver_data;
838 struct cypress_private *priv = usb_get_serial_port_data(port);
839 unsigned long flags;
840
841 spin_lock_irqsave(&priv->lock, flags);
842 if (set & TIOCM_RTS)
843 priv->line_control |= CONTROL_RTS;
844 if (set & TIOCM_DTR)
845 priv->line_control |= CONTROL_DTR;
846 if (clear & TIOCM_RTS)
847 priv->line_control &= ~CONTROL_RTS;
848 if (clear & TIOCM_DTR)
849 priv->line_control &= ~CONTROL_DTR;
850 priv->cmd_ctrl = 1;
851 spin_unlock_irqrestore(&priv->lock, flags);
852
853 return cypress_write(tty, port, NULL, 0);
854 }
855
856 static void cypress_earthmate_init_termios(struct tty_struct *tty)
857 {
858 tty_encode_baud_rate(tty, 4800, 4800);
859 }
860
861 static void cypress_set_termios(struct tty_struct *tty,
862 struct usb_serial_port *port, struct ktermios *old_termios)
863 {
864 struct cypress_private *priv = usb_get_serial_port_data(port);
865 struct device *dev = &port->dev;
866 int data_bits, stop_bits, parity_type, parity_enable;
867 unsigned int cflag;
868 unsigned long flags;
869 __u8 oldlines;
870 int linechange = 0;
871
872 /* Unsupported features need clearing */
873 tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
874
875 cflag = tty->termios.c_cflag;
876
877 /* set number of data bits, parity, stop bits */
878 /* when parity is disabled the parity type bit is ignored */
879
880 /* 1 means 2 stop bits, 0 means 1 stop bit */
881 stop_bits = cflag & CSTOPB ? 1 : 0;
882
883 if (cflag & PARENB) {
884 parity_enable = 1;
885 /* 1 means odd parity, 0 means even parity */
886 parity_type = cflag & PARODD ? 1 : 0;
887 } else
888 parity_enable = parity_type = 0;
889
890 switch (cflag & CSIZE) {
891 case CS5:
892 data_bits = 0;
893 break;
894 case CS6:
895 data_bits = 1;
896 break;
897 case CS7:
898 data_bits = 2;
899 break;
900 case CS8:
901 data_bits = 3;
902 break;
903 default:
904 dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__);
905 data_bits = 3;
906 }
907 spin_lock_irqsave(&priv->lock, flags);
908 oldlines = priv->line_control;
909 if ((cflag & CBAUD) == B0) {
910 /* drop dtr and rts */
911 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
912 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
913 } else
914 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
915 spin_unlock_irqrestore(&priv->lock, flags);
916
917 dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
918 __func__, stop_bits, parity_enable, parity_type, data_bits);
919
920 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
921 data_bits, stop_bits,
922 parity_enable, parity_type,
923 0, CYPRESS_SET_CONFIG);
924
925 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
926 * filled into the private structure this should confirm that all is
927 * working if it returns what we just set */
928 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
929
930 /* Here we can define custom tty settings for devices; the main tty
931 * termios flag base comes from empeg.c */
932
933 spin_lock_irqsave(&priv->lock, flags);
934 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
935 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
936 /* define custom termios settings for NMEA protocol */
937
938 tty->termios.c_iflag /* input modes - */
939 &= ~(IGNBRK /* disable ignore break */
940 | BRKINT /* disable break causes interrupt */
941 | PARMRK /* disable mark parity errors */
942 | ISTRIP /* disable clear high bit of input char */
943 | INLCR /* disable translate NL to CR */
944 | IGNCR /* disable ignore CR */
945 | ICRNL /* disable translate CR to NL */
946 | IXON); /* disable enable XON/XOFF flow control */
947
948 tty->termios.c_oflag /* output modes */
949 &= ~OPOST; /* disable postprocess output char */
950
951 tty->termios.c_lflag /* line discipline modes */
952 &= ~(ECHO /* disable echo input characters */
953 | ECHONL /* disable echo new line */
954 | ICANON /* disable erase, kill, werase, and rprnt
955 special characters */
956 | ISIG /* disable interrupt, quit, and suspend
957 special characters */
958 | IEXTEN); /* disable non-POSIX special characters */
959 } /* CT_CYPHIDCOM: Application should handle this for device */
960
961 linechange = (priv->line_control != oldlines);
962 spin_unlock_irqrestore(&priv->lock, flags);
963
964 /* if necessary, set lines */
965 if (linechange) {
966 priv->cmd_ctrl = 1;
967 cypress_write(tty, port, NULL, 0);
968 }
969 } /* cypress_set_termios */
970
971
972 /* returns amount of data still left in soft buffer */
973 static int cypress_chars_in_buffer(struct tty_struct *tty)
974 {
975 struct usb_serial_port *port = tty->driver_data;
976 struct cypress_private *priv = usb_get_serial_port_data(port);
977 int chars = 0;
978 unsigned long flags;
979
980 spin_lock_irqsave(&priv->lock, flags);
981 chars = kfifo_len(&priv->write_fifo);
982 spin_unlock_irqrestore(&priv->lock, flags);
983
984 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
985 return chars;
986 }
987
988
989 static void cypress_throttle(struct tty_struct *tty)
990 {
991 struct usb_serial_port *port = tty->driver_data;
992 struct cypress_private *priv = usb_get_serial_port_data(port);
993
994 spin_lock_irq(&priv->lock);
995 priv->rx_flags = THROTTLED;
996 spin_unlock_irq(&priv->lock);
997 }
998
999
1000 static void cypress_unthrottle(struct tty_struct *tty)
1001 {
1002 struct usb_serial_port *port = tty->driver_data;
1003 struct cypress_private *priv = usb_get_serial_port_data(port);
1004 int actually_throttled, result;
1005
1006 spin_lock_irq(&priv->lock);
1007 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1008 priv->rx_flags = 0;
1009 spin_unlock_irq(&priv->lock);
1010
1011 if (!priv->comm_is_ok)
1012 return;
1013
1014 if (actually_throttled) {
1015 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1016 if (result) {
1017 dev_err(&port->dev, "%s - failed submitting read urb, "
1018 "error %d\n", __func__, result);
1019 cypress_set_dead(port);
1020 }
1021 }
1022 }
1023
1024
1025 static void cypress_read_int_callback(struct urb *urb)
1026 {
1027 struct usb_serial_port *port = urb->context;
1028 struct cypress_private *priv = usb_get_serial_port_data(port);
1029 struct device *dev = &urb->dev->dev;
1030 struct tty_struct *tty;
1031 unsigned char *data = urb->transfer_buffer;
1032 unsigned long flags;
1033 char tty_flag = TTY_NORMAL;
1034 int bytes = 0;
1035 int result;
1036 int i = 0;
1037 int status = urb->status;
1038
1039 switch (status) {
1040 case 0: /* success */
1041 break;
1042 case -ECONNRESET:
1043 case -ENOENT:
1044 case -ESHUTDOWN:
1045 /* precursor to disconnect so just go away */
1046 return;
1047 case -EPIPE:
1048 /* Can't call usb_clear_halt while in_interrupt */
1049 /* FALLS THROUGH */
1050 default:
1051 /* something ugly is going on... */
1052 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1053 __func__, status);
1054 cypress_set_dead(port);
1055 return;
1056 }
1057
1058 spin_lock_irqsave(&priv->lock, flags);
1059 if (priv->rx_flags & THROTTLED) {
1060 dev_dbg(dev, "%s - now throttling\n", __func__);
1061 priv->rx_flags |= ACTUALLY_THROTTLED;
1062 spin_unlock_irqrestore(&priv->lock, flags);
1063 return;
1064 }
1065 spin_unlock_irqrestore(&priv->lock, flags);
1066
1067 tty = tty_port_tty_get(&port->port);
1068 if (!tty) {
1069 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1070 return;
1071 }
1072
1073 spin_lock_irqsave(&priv->lock, flags);
1074 result = urb->actual_length;
1075 switch (priv->pkt_fmt) {
1076 default:
1077 case packet_format_1:
1078 /* This is for the CY7C64013... */
1079 priv->current_status = data[0] & 0xF8;
1080 bytes = data[1] + 2;
1081 i = 2;
1082 break;
1083 case packet_format_2:
1084 /* This is for the CY7C63743... */
1085 priv->current_status = data[0] & 0xF8;
1086 bytes = (data[0] & 0x07) + 1;
1087 i = 1;
1088 break;
1089 }
1090 spin_unlock_irqrestore(&priv->lock, flags);
1091 if (result < bytes) {
1092 dev_dbg(dev,
1093 "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1094 __func__, result, bytes);
1095 goto continue_read;
1096 }
1097
1098 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1099
1100 spin_lock_irqsave(&priv->lock, flags);
1101 /* check to see if status has changed */
1102 if (priv->current_status != priv->prev_status) {
1103 u8 delta = priv->current_status ^ priv->prev_status;
1104
1105 if (delta & UART_MSR_MASK) {
1106 if (delta & UART_CTS)
1107 port->icount.cts++;
1108 if (delta & UART_DSR)
1109 port->icount.dsr++;
1110 if (delta & UART_RI)
1111 port->icount.rng++;
1112 if (delta & UART_CD)
1113 port->icount.dcd++;
1114
1115 wake_up_interruptible(&port->port.delta_msr_wait);
1116 }
1117
1118 priv->prev_status = priv->current_status;
1119 }
1120 spin_unlock_irqrestore(&priv->lock, flags);
1121
1122 /* hangup, as defined in acm.c... this might be a bad place for it
1123 * though */
1124 if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
1125 dev_dbg(dev, "%s - calling hangup\n", __func__);
1126 tty_hangup(tty);
1127 goto continue_read;
1128 }
1129
1130 /* There is one error bit... I'm assuming it is a parity error
1131 * indicator as the generic firmware will set this bit to 1 if a
1132 * parity error occurs.
1133 * I can not find reference to any other error events. */
1134 spin_lock_irqsave(&priv->lock, flags);
1135 if (priv->current_status & CYP_ERROR) {
1136 spin_unlock_irqrestore(&priv->lock, flags);
1137 tty_flag = TTY_PARITY;
1138 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1139 } else
1140 spin_unlock_irqrestore(&priv->lock, flags);
1141
1142 /* process read if there is data other than line status */
1143 if (bytes > i) {
1144 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1145 tty_flag, bytes - i);
1146 tty_flip_buffer_push(&port->port);
1147 }
1148
1149 spin_lock_irqsave(&priv->lock, flags);
1150 /* control and status byte(s) are also counted */
1151 priv->bytes_in += bytes;
1152 spin_unlock_irqrestore(&priv->lock, flags);
1153
1154 continue_read:
1155 tty_kref_put(tty);
1156
1157 /* Continue trying to always read */
1158
1159 if (priv->comm_is_ok) {
1160 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1161 usb_rcvintpipe(port->serial->dev,
1162 port->interrupt_in_endpointAddress),
1163 port->interrupt_in_urb->transfer_buffer,
1164 port->interrupt_in_urb->transfer_buffer_length,
1165 cypress_read_int_callback, port,
1166 priv->read_urb_interval);
1167 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1168 if (result && result != -EPERM) {
1169 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1170 __func__, result);
1171 cypress_set_dead(port);
1172 }
1173 }
1174 } /* cypress_read_int_callback */
1175
1176
1177 static void cypress_write_int_callback(struct urb *urb)
1178 {
1179 struct usb_serial_port *port = urb->context;
1180 struct cypress_private *priv = usb_get_serial_port_data(port);
1181 struct device *dev = &urb->dev->dev;
1182 int status = urb->status;
1183
1184 switch (status) {
1185 case 0:
1186 /* success */
1187 break;
1188 case -ECONNRESET:
1189 case -ENOENT:
1190 case -ESHUTDOWN:
1191 /* this urb is terminated, clean up */
1192 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1193 __func__, status);
1194 priv->write_urb_in_use = 0;
1195 return;
1196 case -EPIPE:
1197 /* Cannot call usb_clear_halt while in_interrupt */
1198 /* FALLTHROUGH */
1199 default:
1200 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1201 __func__, status);
1202 cypress_set_dead(port);
1203 break;
1204 }
1205 priv->write_urb_in_use = 0;
1206
1207 /* send any buffered data */
1208 cypress_send(port);
1209 }
1210
1211 module_usb_serial_driver(serial_drivers, id_table_combined);
1212
1213 MODULE_AUTHOR(DRIVER_AUTHOR);
1214 MODULE_DESCRIPTION(DRIVER_DESC);
1215 MODULE_LICENSE("GPL");
1216
1217 module_param(stats, bool, S_IRUGO | S_IWUSR);
1218 MODULE_PARM_DESC(stats, "Enable statistics or not");
1219 module_param(interval, int, S_IRUGO | S_IWUSR);
1220 MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1221 module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
1222 MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
Linux with added FPC-III support