?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
spi: spi-fsl-qspi: Fix return value check of devm_ioremap() in probe
[linux/fpc-iii.git] / drivers / usb / serial / digi_acceleport.c
blob91055a191995fcf5f3044e7382b0060a5fa63bc6
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Digi AccelePort USB-4 and USB-2 Serial Converters
4 *
5 * Copyright 2000 by Digi International
6 *
7 * Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
8 * usb-serial driver.
9 *
10 * Peter Berger (pberger@brimson.com)
11 * Al Borchers (borchers@steinerpoint.com)
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/errno.h>
16 #include <linux/slab.h>
17 #include <linux/tty.h>
18 #include <linux/tty_driver.h>
19 #include <linux/tty_flip.h>
20 #include <linux/module.h>
21 #include <linux/spinlock.h>
22 #include <linux/workqueue.h>
23 #include <linux/uaccess.h>
24 #include <linux/usb.h>
25 #include <linux/wait.h>
26 #include <linux/sched/signal.h>
27 #include <linux/usb/serial.h>
28
29 /* Defines */
30
31 #define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
32 #define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
33
34 /* port output buffer length -- must be <= transfer buffer length - 2 */
35 /* so we can be sure to send the full buffer in one urb */
36 #define DIGI_OUT_BUF_SIZE 8
37
38 /* port input buffer length -- must be >= transfer buffer length - 3 */
39 /* so we can be sure to hold at least one full buffer from one urb */
40 #define DIGI_IN_BUF_SIZE 64
41
42 /* retry timeout while sleeping */
43 #define DIGI_RETRY_TIMEOUT (HZ/10)
44
45 /* timeout while waiting for tty output to drain in close */
46 /* this delay is used twice in close, so the total delay could */
47 /* be twice this value */
48 #define DIGI_CLOSE_TIMEOUT (5*HZ)
49
50
51 /* AccelePort USB Defines */
52
53 /* ids */
54 #define DIGI_VENDOR_ID 0x05c5
55 #define DIGI_2_ID 0x0002 /* USB-2 */
56 #define DIGI_4_ID 0x0004 /* USB-4 */
57
58 /* commands
59 * "INB": can be used on the in-band endpoint
60 * "OOB": can be used on the out-of-band endpoint
61 */
62 #define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
63 #define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
64 #define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
65 #define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
66 #define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
67 #define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
68 #define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
69 #define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
70 #define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
71 #define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
72 #define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
73 #define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
74 #define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
75 #define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
76 #define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
77 #define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
78 #define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
79 #define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
80 #define DIGI_CMD_SEND_DATA 18 /* INB */
81 #define DIGI_CMD_RECEIVE_DATA 19 /* INB */
82 #define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
83 #define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
84
85 /* baud rates */
86 #define DIGI_BAUD_50 0
87 #define DIGI_BAUD_75 1
88 #define DIGI_BAUD_110 2
89 #define DIGI_BAUD_150 3
90 #define DIGI_BAUD_200 4
91 #define DIGI_BAUD_300 5
92 #define DIGI_BAUD_600 6
93 #define DIGI_BAUD_1200 7
94 #define DIGI_BAUD_1800 8
95 #define DIGI_BAUD_2400 9
96 #define DIGI_BAUD_4800 10
97 #define DIGI_BAUD_7200 11
98 #define DIGI_BAUD_9600 12
99 #define DIGI_BAUD_14400 13
100 #define DIGI_BAUD_19200 14
101 #define DIGI_BAUD_28800 15
102 #define DIGI_BAUD_38400 16
103 #define DIGI_BAUD_57600 17
104 #define DIGI_BAUD_76800 18
105 #define DIGI_BAUD_115200 19
106 #define DIGI_BAUD_153600 20
107 #define DIGI_BAUD_230400 21
108 #define DIGI_BAUD_460800 22
109
110 /* arguments */
111 #define DIGI_WORD_SIZE_5 0
112 #define DIGI_WORD_SIZE_6 1
113 #define DIGI_WORD_SIZE_7 2
114 #define DIGI_WORD_SIZE_8 3
115
116 #define DIGI_PARITY_NONE 0
117 #define DIGI_PARITY_ODD 1
118 #define DIGI_PARITY_EVEN 2
119 #define DIGI_PARITY_MARK 3
120 #define DIGI_PARITY_SPACE 4
121
122 #define DIGI_STOP_BITS_1 0
123 #define DIGI_STOP_BITS_2 1
124
125 #define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
126 #define DIGI_INPUT_FLOW_CONTROL_RTS 2
127 #define DIGI_INPUT_FLOW_CONTROL_DTR 4
128
129 #define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
130 #define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
131 #define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
132
133 #define DIGI_DTR_INACTIVE 0
134 #define DIGI_DTR_ACTIVE 1
135 #define DIGI_DTR_INPUT_FLOW_CONTROL 2
136
137 #define DIGI_RTS_INACTIVE 0
138 #define DIGI_RTS_ACTIVE 1
139 #define DIGI_RTS_INPUT_FLOW_CONTROL 2
140 #define DIGI_RTS_TOGGLE 3
141
142 #define DIGI_FLUSH_TX 1
143 #define DIGI_FLUSH_RX 2
144 #define DIGI_RESUME_TX 4 /* clears xoff condition */
145
146 #define DIGI_TRANSMIT_NOT_IDLE 0
147 #define DIGI_TRANSMIT_IDLE 1
148
149 #define DIGI_DISABLE 0
150 #define DIGI_ENABLE 1
151
152 #define DIGI_DEASSERT 0
153 #define DIGI_ASSERT 1
154
155 /* in band status codes */
156 #define DIGI_OVERRUN_ERROR 4
157 #define DIGI_PARITY_ERROR 8
158 #define DIGI_FRAMING_ERROR 16
159 #define DIGI_BREAK_ERROR 32
160
161 /* out of band status */
162 #define DIGI_NO_ERROR 0
163 #define DIGI_BAD_FIRST_PARAMETER 1
164 #define DIGI_BAD_SECOND_PARAMETER 2
165 #define DIGI_INVALID_LINE 3
166 #define DIGI_INVALID_OPCODE 4
167
168 /* input signals */
169 #define DIGI_READ_INPUT_SIGNALS_SLOT 1
170 #define DIGI_READ_INPUT_SIGNALS_ERR 2
171 #define DIGI_READ_INPUT_SIGNALS_BUSY 4
172 #define DIGI_READ_INPUT_SIGNALS_PE 8
173 #define DIGI_READ_INPUT_SIGNALS_CTS 16
174 #define DIGI_READ_INPUT_SIGNALS_DSR 32
175 #define DIGI_READ_INPUT_SIGNALS_RI 64
176 #define DIGI_READ_INPUT_SIGNALS_DCD 128
177
178
179 /* Structures */
180
181 struct digi_serial {
182 spinlock_t ds_serial_lock;
183 struct usb_serial_port *ds_oob_port; /* out-of-band port */
184 int ds_oob_port_num; /* index of out-of-band port */
185 int ds_device_started;
186 };
187
188 struct digi_port {
189 spinlock_t dp_port_lock;
190 int dp_port_num;
191 int dp_out_buf_len;
192 unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
193 int dp_write_urb_in_use;
194 unsigned int dp_modem_signals;
195 int dp_transmit_idle;
196 wait_queue_head_t dp_transmit_idle_wait;
197 int dp_throttled;
198 int dp_throttle_restart;
199 wait_queue_head_t dp_flush_wait;
200 wait_queue_head_t dp_close_wait; /* wait queue for close */
201 struct work_struct dp_wakeup_work;
202 struct usb_serial_port *dp_port;
203 };
204
205
206 /* Local Function Declarations */
207
208 static void digi_wakeup_write_lock(struct work_struct *work);
209 static int digi_write_oob_command(struct usb_serial_port *port,
210 unsigned char *buf, int count, int interruptible);
211 static int digi_write_inb_command(struct usb_serial_port *port,
212 unsigned char *buf, int count, unsigned long timeout);
213 static int digi_set_modem_signals(struct usb_serial_port *port,
214 unsigned int modem_signals, int interruptible);
215 static int digi_transmit_idle(struct usb_serial_port *port,
216 unsigned long timeout);
217 static void digi_rx_throttle(struct tty_struct *tty);
218 static void digi_rx_unthrottle(struct tty_struct *tty);
219 static void digi_set_termios(struct tty_struct *tty,
220 struct usb_serial_port *port, struct ktermios *old_termios);
221 static void digi_break_ctl(struct tty_struct *tty, int break_state);
222 static int digi_tiocmget(struct tty_struct *tty);
223 static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
224 unsigned int clear);
225 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
226 const unsigned char *buf, int count);
227 static void digi_write_bulk_callback(struct urb *urb);
228 static int digi_write_room(struct tty_struct *tty);
229 static int digi_chars_in_buffer(struct tty_struct *tty);
230 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
231 static void digi_close(struct usb_serial_port *port);
232 static void digi_dtr_rts(struct usb_serial_port *port, int on);
233 static int digi_startup_device(struct usb_serial *serial);
234 static int digi_startup(struct usb_serial *serial);
235 static void digi_disconnect(struct usb_serial *serial);
236 static void digi_release(struct usb_serial *serial);
237 static int digi_port_probe(struct usb_serial_port *port);
238 static int digi_port_remove(struct usb_serial_port *port);
239 static void digi_read_bulk_callback(struct urb *urb);
240 static int digi_read_inb_callback(struct urb *urb);
241 static int digi_read_oob_callback(struct urb *urb);
242
243
244 static const struct usb_device_id id_table_combined[] = {
245 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
246 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
247 { } /* Terminating entry */
248 };
249
250 static const struct usb_device_id id_table_2[] = {
251 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
252 { } /* Terminating entry */
253 };
254
255 static const struct usb_device_id id_table_4[] = {
256 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
257 { } /* Terminating entry */
258 };
259
260 MODULE_DEVICE_TABLE(usb, id_table_combined);
261
262 /* device info needed for the Digi serial converter */
263
264 static struct usb_serial_driver digi_acceleport_2_device = {
265 .driver = {
266 .owner = THIS_MODULE,
267 .name = "digi_2",
268 },
269 .description = "Digi 2 port USB adapter",
270 .id_table = id_table_2,
271 .num_ports = 3,
272 .num_bulk_in = 4,
273 .num_bulk_out = 4,
274 .open = digi_open,
275 .close = digi_close,
276 .dtr_rts = digi_dtr_rts,
277 .write = digi_write,
278 .write_room = digi_write_room,
279 .write_bulk_callback = digi_write_bulk_callback,
280 .read_bulk_callback = digi_read_bulk_callback,
281 .chars_in_buffer = digi_chars_in_buffer,
282 .throttle = digi_rx_throttle,
283 .unthrottle = digi_rx_unthrottle,
284 .set_termios = digi_set_termios,
285 .break_ctl = digi_break_ctl,
286 .tiocmget = digi_tiocmget,
287 .tiocmset = digi_tiocmset,
288 .attach = digi_startup,
289 .disconnect = digi_disconnect,
290 .release = digi_release,
291 .port_probe = digi_port_probe,
292 .port_remove = digi_port_remove,
293 };
294
295 static struct usb_serial_driver digi_acceleport_4_device = {
296 .driver = {
297 .owner = THIS_MODULE,
298 .name = "digi_4",
299 },
300 .description = "Digi 4 port USB adapter",
301 .id_table = id_table_4,
302 .num_ports = 4,
303 .num_bulk_in = 5,
304 .num_bulk_out = 5,
305 .open = digi_open,
306 .close = digi_close,
307 .write = digi_write,
308 .write_room = digi_write_room,
309 .write_bulk_callback = digi_write_bulk_callback,
310 .read_bulk_callback = digi_read_bulk_callback,
311 .chars_in_buffer = digi_chars_in_buffer,
312 .throttle = digi_rx_throttle,
313 .unthrottle = digi_rx_unthrottle,
314 .set_termios = digi_set_termios,
315 .break_ctl = digi_break_ctl,
316 .tiocmget = digi_tiocmget,
317 .tiocmset = digi_tiocmset,
318 .attach = digi_startup,
319 .disconnect = digi_disconnect,
320 .release = digi_release,
321 .port_probe = digi_port_probe,
322 .port_remove = digi_port_remove,
323 };
324
325 static struct usb_serial_driver * const serial_drivers[] = {
326 &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
327 };
328
329 /* Functions */
330
331 /*
332 * Cond Wait Interruptible Timeout Irqrestore
333 *
334 * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
335 * so that wake ups are not lost if they occur between the unlock
336 * and the sleep. In other words, spin_unlock_irqrestore and
337 * interruptible_sleep_on_timeout are "atomic" with respect to
338 * wake ups. This is used to implement condition variables.
339 *
340 * interruptible_sleep_on_timeout is deprecated and has been replaced
341 * with the equivalent code.
342 */
343
344 static long cond_wait_interruptible_timeout_irqrestore(
345 wait_queue_head_t *q, long timeout,
346 spinlock_t *lock, unsigned long flags)
347 __releases(lock)
348 {
349 DEFINE_WAIT(wait);
350
351 prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
352 spin_unlock_irqrestore(lock, flags);
353 timeout = schedule_timeout(timeout);
354 finish_wait(q, &wait);
355
356 return timeout;
357 }
358
359
360 /*
361 * Digi Wakeup Write
362 *
363 * Wake up port, line discipline, and tty processes sleeping
364 * on writes.
365 */
366
367 static void digi_wakeup_write_lock(struct work_struct *work)
368 {
369 struct digi_port *priv =
370 container_of(work, struct digi_port, dp_wakeup_work);
371 struct usb_serial_port *port = priv->dp_port;
372 unsigned long flags;
373
374 spin_lock_irqsave(&priv->dp_port_lock, flags);
375 tty_port_tty_wakeup(&port->port);
376 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
377 }
378
379 /*
380 * Digi Write OOB Command
381 *
382 * Write commands on the out of band port. Commands are 4
383 * bytes each, multiple commands can be sent at once, and
384 * no command will be split across USB packets. Returns 0
385 * if successful, -EINTR if interrupted while sleeping and
386 * the interruptible flag is true, or a negative error
387 * returned by usb_submit_urb.
388 */
389
390 static int digi_write_oob_command(struct usb_serial_port *port,
391 unsigned char *buf, int count, int interruptible)
392 {
393 int ret = 0;
394 int len;
395 struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
396 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
397 unsigned long flags = 0;
398
399 dev_dbg(&port->dev,
400 "digi_write_oob_command: TOP: port=%d, count=%d\n",
401 oob_priv->dp_port_num, count);
402
403 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
404 while (count > 0) {
405 while (oob_priv->dp_write_urb_in_use) {
406 cond_wait_interruptible_timeout_irqrestore(
407 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
408 &oob_priv->dp_port_lock, flags);
409 if (interruptible && signal_pending(current))
410 return -EINTR;
411 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
412 }
413
414 /* len must be a multiple of 4, so commands are not split */
415 len = min(count, oob_port->bulk_out_size);
416 if (len > 4)
417 len &= ~3;
418 memcpy(oob_port->write_urb->transfer_buffer, buf, len);
419 oob_port->write_urb->transfer_buffer_length = len;
420 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
421 if (ret == 0) {
422 oob_priv->dp_write_urb_in_use = 1;
423 count -= len;
424 buf += len;
425 }
426 }
427 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
428 if (ret)
429 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
430 __func__, ret);
431 return ret;
432
433 }
434
435
436 /*
437 * Digi Write In Band Command
438 *
439 * Write commands on the given port. Commands are 4
440 * bytes each, multiple commands can be sent at once, and
441 * no command will be split across USB packets. If timeout
442 * is non-zero, write in band command will return after
443 * waiting unsuccessfully for the URB status to clear for
444 * timeout ticks. Returns 0 if successful, or a negative
445 * error returned by digi_write.
446 */
447
448 static int digi_write_inb_command(struct usb_serial_port *port,
449 unsigned char *buf, int count, unsigned long timeout)
450 {
451 int ret = 0;
452 int len;
453 struct digi_port *priv = usb_get_serial_port_data(port);
454 unsigned char *data = port->write_urb->transfer_buffer;
455 unsigned long flags = 0;
456
457 dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
458 priv->dp_port_num, count);
459
460 if (timeout)
461 timeout += jiffies;
462 else
463 timeout = ULONG_MAX;
464
465 spin_lock_irqsave(&priv->dp_port_lock, flags);
466 while (count > 0 && ret == 0) {
467 while (priv->dp_write_urb_in_use &&
468 time_before(jiffies, timeout)) {
469 cond_wait_interruptible_timeout_irqrestore(
470 &port->write_wait, DIGI_RETRY_TIMEOUT,
471 &priv->dp_port_lock, flags);
472 if (signal_pending(current))
473 return -EINTR;
474 spin_lock_irqsave(&priv->dp_port_lock, flags);
475 }
476
477 /* len must be a multiple of 4 and small enough to */
478 /* guarantee the write will send buffered data first, */
479 /* so commands are in order with data and not split */
480 len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
481 if (len > 4)
482 len &= ~3;
483
484 /* write any buffered data first */
485 if (priv->dp_out_buf_len > 0) {
486 data[0] = DIGI_CMD_SEND_DATA;
487 data[1] = priv->dp_out_buf_len;
488 memcpy(data + 2, priv->dp_out_buf,
489 priv->dp_out_buf_len);
490 memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
491 port->write_urb->transfer_buffer_length
492 = priv->dp_out_buf_len + 2 + len;
493 } else {
494 memcpy(data, buf, len);
495 port->write_urb->transfer_buffer_length = len;
496 }
497
498 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
499 if (ret == 0) {
500 priv->dp_write_urb_in_use = 1;
501 priv->dp_out_buf_len = 0;
502 count -= len;
503 buf += len;
504 }
505
506 }
507 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
508
509 if (ret)
510 dev_err(&port->dev,
511 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
512 __func__, ret, priv->dp_port_num);
513 return ret;
514 }
515
516
517 /*
518 * Digi Set Modem Signals
519 *
520 * Sets or clears DTR and RTS on the port, according to the
521 * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
522 * for the modem_signals argument. Returns 0 if successful,
523 * -EINTR if interrupted while sleeping, or a non-zero error
524 * returned by usb_submit_urb.
525 */
526
527 static int digi_set_modem_signals(struct usb_serial_port *port,
528 unsigned int modem_signals, int interruptible)
529 {
530
531 int ret;
532 struct digi_port *port_priv = usb_get_serial_port_data(port);
533 struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
534 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
535 unsigned char *data = oob_port->write_urb->transfer_buffer;
536 unsigned long flags = 0;
537
538
539 dev_dbg(&port->dev,
540 "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
541 port_priv->dp_port_num, modem_signals);
542
543 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
544 spin_lock(&port_priv->dp_port_lock);
545
546 while (oob_priv->dp_write_urb_in_use) {
547 spin_unlock(&port_priv->dp_port_lock);
548 cond_wait_interruptible_timeout_irqrestore(
549 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
550 &oob_priv->dp_port_lock, flags);
551 if (interruptible && signal_pending(current))
552 return -EINTR;
553 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
554 spin_lock(&port_priv->dp_port_lock);
555 }
556 data[0] = DIGI_CMD_SET_DTR_SIGNAL;
557 data[1] = port_priv->dp_port_num;
558 data[2] = (modem_signals & TIOCM_DTR) ?
559 DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
560 data[3] = 0;
561 data[4] = DIGI_CMD_SET_RTS_SIGNAL;
562 data[5] = port_priv->dp_port_num;
563 data[6] = (modem_signals & TIOCM_RTS) ?
564 DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
565 data[7] = 0;
566
567 oob_port->write_urb->transfer_buffer_length = 8;
568
569 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
570 if (ret == 0) {
571 oob_priv->dp_write_urb_in_use = 1;
572 port_priv->dp_modem_signals &= ~(TIOCM_DTR | TIOCM_RTS);
573 port_priv->dp_modem_signals |=
574 modem_signals & (TIOCM_DTR | TIOCM_RTS);
575 }
576 spin_unlock(&port_priv->dp_port_lock);
577 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
578 if (ret)
579 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
580 __func__, ret);
581 return ret;
582 }
583
584 /*
585 * Digi Transmit Idle
586 *
587 * Digi transmit idle waits, up to timeout ticks, for the transmitter
588 * to go idle. It returns 0 if successful or a negative error.
589 *
590 * There are race conditions here if more than one process is calling
591 * digi_transmit_idle on the same port at the same time. However, this
592 * is only called from close, and only one process can be in close on a
593 * port at a time, so its ok.
594 */
595
596 static int digi_transmit_idle(struct usb_serial_port *port,
597 unsigned long timeout)
598 {
599 int ret;
600 unsigned char buf[2];
601 struct digi_port *priv = usb_get_serial_port_data(port);
602 unsigned long flags = 0;
603
604 spin_lock_irqsave(&priv->dp_port_lock, flags);
605 priv->dp_transmit_idle = 0;
606 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
607
608 buf[0] = DIGI_CMD_TRANSMIT_IDLE;
609 buf[1] = 0;
610
611 timeout += jiffies;
612
613 ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
614 if (ret != 0)
615 return ret;
616
617 spin_lock_irqsave(&priv->dp_port_lock, flags);
618
619 while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
620 cond_wait_interruptible_timeout_irqrestore(
621 &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
622 &priv->dp_port_lock, flags);
623 if (signal_pending(current))
624 return -EINTR;
625 spin_lock_irqsave(&priv->dp_port_lock, flags);
626 }
627 priv->dp_transmit_idle = 0;
628 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
629 return 0;
630
631 }
632
633
634 static void digi_rx_throttle(struct tty_struct *tty)
635 {
636 unsigned long flags;
637 struct usb_serial_port *port = tty->driver_data;
638 struct digi_port *priv = usb_get_serial_port_data(port);
639
640 /* stop receiving characters by not resubmitting the read urb */
641 spin_lock_irqsave(&priv->dp_port_lock, flags);
642 priv->dp_throttled = 1;
643 priv->dp_throttle_restart = 0;
644 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
645 }
646
647
648 static void digi_rx_unthrottle(struct tty_struct *tty)
649 {
650 int ret = 0;
651 unsigned long flags;
652 struct usb_serial_port *port = tty->driver_data;
653 struct digi_port *priv = usb_get_serial_port_data(port);
654
655 spin_lock_irqsave(&priv->dp_port_lock, flags);
656
657 /* restart read chain */
658 if (priv->dp_throttle_restart)
659 ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
660
661 /* turn throttle off */
662 priv->dp_throttled = 0;
663 priv->dp_throttle_restart = 0;
664
665 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
666
667 if (ret)
668 dev_err(&port->dev,
669 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
670 __func__, ret, priv->dp_port_num);
671 }
672
673
674 static void digi_set_termios(struct tty_struct *tty,
675 struct usb_serial_port *port, struct ktermios *old_termios)
676 {
677 struct digi_port *priv = usb_get_serial_port_data(port);
678 struct device *dev = &port->dev;
679 unsigned int iflag = tty->termios.c_iflag;
680 unsigned int cflag = tty->termios.c_cflag;
681 unsigned int old_iflag = old_termios->c_iflag;
682 unsigned int old_cflag = old_termios->c_cflag;
683 unsigned char buf[32];
684 unsigned int modem_signals;
685 int arg, ret;
686 int i = 0;
687 speed_t baud;
688
689 dev_dbg(dev,
690 "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
691 priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
692
693 /* set baud rate */
694 baud = tty_get_baud_rate(tty);
695 if (baud != tty_termios_baud_rate(old_termios)) {
696 arg = -1;
697
698 /* reassert DTR and (maybe) RTS on transition from B0 */
699 if ((old_cflag & CBAUD) == B0) {
700 /* don't set RTS if using hardware flow control */
701 /* and throttling input */
702 modem_signals = TIOCM_DTR;
703 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
704 modem_signals |= TIOCM_RTS;
705 digi_set_modem_signals(port, modem_signals, 1);
706 }
707 switch (baud) {
708 /* drop DTR and RTS on transition to B0 */
709 case 0: digi_set_modem_signals(port, 0, 1); break;
710 case 50: arg = DIGI_BAUD_50; break;
711 case 75: arg = DIGI_BAUD_75; break;
712 case 110: arg = DIGI_BAUD_110; break;
713 case 150: arg = DIGI_BAUD_150; break;
714 case 200: arg = DIGI_BAUD_200; break;
715 case 300: arg = DIGI_BAUD_300; break;
716 case 600: arg = DIGI_BAUD_600; break;
717 case 1200: arg = DIGI_BAUD_1200; break;
718 case 1800: arg = DIGI_BAUD_1800; break;
719 case 2400: arg = DIGI_BAUD_2400; break;
720 case 4800: arg = DIGI_BAUD_4800; break;
721 case 9600: arg = DIGI_BAUD_9600; break;
722 case 19200: arg = DIGI_BAUD_19200; break;
723 case 38400: arg = DIGI_BAUD_38400; break;
724 case 57600: arg = DIGI_BAUD_57600; break;
725 case 115200: arg = DIGI_BAUD_115200; break;
726 case 230400: arg = DIGI_BAUD_230400; break;
727 case 460800: arg = DIGI_BAUD_460800; break;
728 default:
729 arg = DIGI_BAUD_9600;
730 baud = 9600;
731 break;
732 }
733 if (arg != -1) {
734 buf[i++] = DIGI_CMD_SET_BAUD_RATE;
735 buf[i++] = priv->dp_port_num;
736 buf[i++] = arg;
737 buf[i++] = 0;
738 }
739 }
740 /* set parity */
741 tty->termios.c_cflag &= ~CMSPAR;
742
743 if ((cflag & (PARENB | PARODD)) != (old_cflag & (PARENB | PARODD))) {
744 if (cflag & PARENB) {
745 if (cflag & PARODD)
746 arg = DIGI_PARITY_ODD;
747 else
748 arg = DIGI_PARITY_EVEN;
749 } else {
750 arg = DIGI_PARITY_NONE;
751 }
752 buf[i++] = DIGI_CMD_SET_PARITY;
753 buf[i++] = priv->dp_port_num;
754 buf[i++] = arg;
755 buf[i++] = 0;
756 }
757 /* set word size */
758 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
759 arg = -1;
760 switch (cflag & CSIZE) {
761 case CS5: arg = DIGI_WORD_SIZE_5; break;
762 case CS6: arg = DIGI_WORD_SIZE_6; break;
763 case CS7: arg = DIGI_WORD_SIZE_7; break;
764 case CS8: arg = DIGI_WORD_SIZE_8; break;
765 default:
766 dev_dbg(dev,
767 "digi_set_termios: can't handle word size %d\n",
768 cflag & CSIZE);
769 break;
770 }
771
772 if (arg != -1) {
773 buf[i++] = DIGI_CMD_SET_WORD_SIZE;
774 buf[i++] = priv->dp_port_num;
775 buf[i++] = arg;
776 buf[i++] = 0;
777 }
778
779 }
780
781 /* set stop bits */
782 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
783
784 if ((cflag & CSTOPB))
785 arg = DIGI_STOP_BITS_2;
786 else
787 arg = DIGI_STOP_BITS_1;
788
789 buf[i++] = DIGI_CMD_SET_STOP_BITS;
790 buf[i++] = priv->dp_port_num;
791 buf[i++] = arg;
792 buf[i++] = 0;
793
794 }
795
796 /* set input flow control */
797 if ((iflag & IXOFF) != (old_iflag & IXOFF) ||
798 (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
799 arg = 0;
800 if (iflag & IXOFF)
801 arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
802 else
803 arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
804
805 if (cflag & CRTSCTS) {
806 arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
807
808 /* On USB-4 it is necessary to assert RTS prior */
809 /* to selecting RTS input flow control. */
810 buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
811 buf[i++] = priv->dp_port_num;
812 buf[i++] = DIGI_RTS_ACTIVE;
813 buf[i++] = 0;
814
815 } else {
816 arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
817 }
818 buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
819 buf[i++] = priv->dp_port_num;
820 buf[i++] = arg;
821 buf[i++] = 0;
822 }
823
824 /* set output flow control */
825 if ((iflag & IXON) != (old_iflag & IXON) ||
826 (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
827 arg = 0;
828 if (iflag & IXON)
829 arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
830 else
831 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
832
833 if (cflag & CRTSCTS)
834 arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
835 else
836 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
837
838 buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
839 buf[i++] = priv->dp_port_num;
840 buf[i++] = arg;
841 buf[i++] = 0;
842 }
843
844 /* set receive enable/disable */
845 if ((cflag & CREAD) != (old_cflag & CREAD)) {
846 if (cflag & CREAD)
847 arg = DIGI_ENABLE;
848 else
849 arg = DIGI_DISABLE;
850
851 buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
852 buf[i++] = priv->dp_port_num;
853 buf[i++] = arg;
854 buf[i++] = 0;
855 }
856 ret = digi_write_oob_command(port, buf, i, 1);
857 if (ret != 0)
858 dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
859 tty_encode_baud_rate(tty, baud, baud);
860 }
861
862
863 static void digi_break_ctl(struct tty_struct *tty, int break_state)
864 {
865 struct usb_serial_port *port = tty->driver_data;
866 unsigned char buf[4];
867
868 buf[0] = DIGI_CMD_BREAK_CONTROL;
869 buf[1] = 2; /* length */
870 buf[2] = break_state ? 1 : 0;
871 buf[3] = 0; /* pad */
872 digi_write_inb_command(port, buf, 4, 0);
873 }
874
875
876 static int digi_tiocmget(struct tty_struct *tty)
877 {
878 struct usb_serial_port *port = tty->driver_data;
879 struct digi_port *priv = usb_get_serial_port_data(port);
880 unsigned int val;
881 unsigned long flags;
882
883 spin_lock_irqsave(&priv->dp_port_lock, flags);
884 val = priv->dp_modem_signals;
885 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
886 return val;
887 }
888
889
890 static int digi_tiocmset(struct tty_struct *tty,
891 unsigned int set, unsigned int clear)
892 {
893 struct usb_serial_port *port = tty->driver_data;
894 struct digi_port *priv = usb_get_serial_port_data(port);
895 unsigned int val;
896 unsigned long flags;
897
898 spin_lock_irqsave(&priv->dp_port_lock, flags);
899 val = (priv->dp_modem_signals & ~clear) | set;
900 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
901 return digi_set_modem_signals(port, val, 1);
902 }
903
904
905 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
906 const unsigned char *buf, int count)
907 {
908
909 int ret, data_len, new_len;
910 struct digi_port *priv = usb_get_serial_port_data(port);
911 unsigned char *data = port->write_urb->transfer_buffer;
912 unsigned long flags = 0;
913
914 dev_dbg(&port->dev,
915 "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
916 priv->dp_port_num, count, in_interrupt());
917
918 /* copy user data (which can sleep) before getting spin lock */
919 count = min(count, port->bulk_out_size-2);
920 count = min(64, count);
921
922 /* be sure only one write proceeds at a time */
923 /* there are races on the port private buffer */
924 spin_lock_irqsave(&priv->dp_port_lock, flags);
925
926 /* wait for urb status clear to submit another urb */
927 if (priv->dp_write_urb_in_use) {
928 /* buffer data if count is 1 (probably put_char) if possible */
929 if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
930 priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
931 new_len = 1;
932 } else {
933 new_len = 0;
934 }
935 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
936 return new_len;
937 }
938
939 /* allow space for any buffered data and for new data, up to */
940 /* transfer buffer size - 2 (for command and length bytes) */
941 new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
942 data_len = new_len + priv->dp_out_buf_len;
943
944 if (data_len == 0) {
945 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
946 return 0;
947 }
948
949 port->write_urb->transfer_buffer_length = data_len+2;
950
951 *data++ = DIGI_CMD_SEND_DATA;
952 *data++ = data_len;
953
954 /* copy in buffered data first */
955 memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
956 data += priv->dp_out_buf_len;
957
958 /* copy in new data */
959 memcpy(data, buf, new_len);
960
961 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
962 if (ret == 0) {
963 priv->dp_write_urb_in_use = 1;
964 ret = new_len;
965 priv->dp_out_buf_len = 0;
966 }
967
968 /* return length of new data written, or error */
969 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
970 if (ret < 0)
971 dev_err_console(port,
972 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
973 __func__, ret, priv->dp_port_num);
974 dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
975 return ret;
976
977 }
978
979 static void digi_write_bulk_callback(struct urb *urb)
980 {
981
982 struct usb_serial_port *port = urb->context;
983 struct usb_serial *serial;
984 struct digi_port *priv;
985 struct digi_serial *serial_priv;
986 unsigned long flags;
987 int ret = 0;
988 int status = urb->status;
989
990 /* port and serial sanity check */
991 if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
992 pr_err("%s: port or port->private is NULL, status=%d\n",
993 __func__, status);
994 return;
995 }
996 serial = port->serial;
997 if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
998 dev_err(&port->dev,
999 "%s: serial or serial->private is NULL, status=%d\n",
1000 __func__, status);
1001 return;
1002 }
1003
1004 /* handle oob callback */
1005 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1006 dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
1007 spin_lock_irqsave(&priv->dp_port_lock, flags);
1008 priv->dp_write_urb_in_use = 0;
1009 wake_up_interruptible(&port->write_wait);
1010 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1011 return;
1012 }
1013
1014 /* try to send any buffered data on this port */
1015 spin_lock_irqsave(&priv->dp_port_lock, flags);
1016 priv->dp_write_urb_in_use = 0;
1017 if (priv->dp_out_buf_len > 0) {
1018 *((unsigned char *)(port->write_urb->transfer_buffer))
1019 = (unsigned char)DIGI_CMD_SEND_DATA;
1020 *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
1021 = (unsigned char)priv->dp_out_buf_len;
1022 port->write_urb->transfer_buffer_length =
1023 priv->dp_out_buf_len + 2;
1024 memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
1025 priv->dp_out_buf_len);
1026 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1027 if (ret == 0) {
1028 priv->dp_write_urb_in_use = 1;
1029 priv->dp_out_buf_len = 0;
1030 }
1031 }
1032 /* wake up processes sleeping on writes immediately */
1033 tty_port_tty_wakeup(&port->port);
1034 /* also queue up a wakeup at scheduler time, in case we */
1035 /* lost the race in write_chan(). */
1036 schedule_work(&priv->dp_wakeup_work);
1037
1038 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1039 if (ret && ret != -EPERM)
1040 dev_err_console(port,
1041 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1042 __func__, ret, priv->dp_port_num);
1043 }
1044
1045 static int digi_write_room(struct tty_struct *tty)
1046 {
1047 struct usb_serial_port *port = tty->driver_data;
1048 struct digi_port *priv = usb_get_serial_port_data(port);
1049 int room;
1050 unsigned long flags = 0;
1051
1052 spin_lock_irqsave(&priv->dp_port_lock, flags);
1053
1054 if (priv->dp_write_urb_in_use)
1055 room = 0;
1056 else
1057 room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
1058
1059 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1060 dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room);
1061 return room;
1062
1063 }
1064
1065 static int digi_chars_in_buffer(struct tty_struct *tty)
1066 {
1067 struct usb_serial_port *port = tty->driver_data;
1068 struct digi_port *priv = usb_get_serial_port_data(port);
1069
1070 if (priv->dp_write_urb_in_use) {
1071 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1072 priv->dp_port_num, port->bulk_out_size - 2);
1073 /* return(port->bulk_out_size - 2); */
1074 return 256;
1075 } else {
1076 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1077 priv->dp_port_num, priv->dp_out_buf_len);
1078 return priv->dp_out_buf_len;
1079 }
1080
1081 }
1082
1083 static void digi_dtr_rts(struct usb_serial_port *port, int on)
1084 {
1085 /* Adjust DTR and RTS */
1086 digi_set_modem_signals(port, on * (TIOCM_DTR | TIOCM_RTS), 1);
1087 }
1088
1089 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
1090 {
1091 int ret;
1092 unsigned char buf[32];
1093 struct digi_port *priv = usb_get_serial_port_data(port);
1094 struct ktermios not_termios;
1095
1096 /* be sure the device is started up */
1097 if (digi_startup_device(port->serial) != 0)
1098 return -ENXIO;
1099
1100 /* read modem signals automatically whenever they change */
1101 buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
1102 buf[1] = priv->dp_port_num;
1103 buf[2] = DIGI_ENABLE;
1104 buf[3] = 0;
1105
1106 /* flush fifos */
1107 buf[4] = DIGI_CMD_IFLUSH_FIFO;
1108 buf[5] = priv->dp_port_num;
1109 buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1110 buf[7] = 0;
1111
1112 ret = digi_write_oob_command(port, buf, 8, 1);
1113 if (ret != 0)
1114 dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
1115
1116 /* set termios settings */
1117 if (tty) {
1118 not_termios.c_cflag = ~tty->termios.c_cflag;
1119 not_termios.c_iflag = ~tty->termios.c_iflag;
1120 digi_set_termios(tty, port, &not_termios);
1121 }
1122 return 0;
1123 }
1124
1125
1126 static void digi_close(struct usb_serial_port *port)
1127 {
1128 DEFINE_WAIT(wait);
1129 int ret;
1130 unsigned char buf[32];
1131 struct digi_port *priv = usb_get_serial_port_data(port);
1132
1133 mutex_lock(&port->serial->disc_mutex);
1134 /* if disconnected, just clear flags */
1135 if (port->serial->disconnected)
1136 goto exit;
1137
1138 /* FIXME: Transmit idle belongs in the wait_unti_sent path */
1139 digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
1140
1141 /* disable input flow control */
1142 buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
1143 buf[1] = priv->dp_port_num;
1144 buf[2] = DIGI_DISABLE;
1145 buf[3] = 0;
1146
1147 /* disable output flow control */
1148 buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
1149 buf[5] = priv->dp_port_num;
1150 buf[6] = DIGI_DISABLE;
1151 buf[7] = 0;
1152
1153 /* disable reading modem signals automatically */
1154 buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
1155 buf[9] = priv->dp_port_num;
1156 buf[10] = DIGI_DISABLE;
1157 buf[11] = 0;
1158
1159 /* disable receive */
1160 buf[12] = DIGI_CMD_RECEIVE_ENABLE;
1161 buf[13] = priv->dp_port_num;
1162 buf[14] = DIGI_DISABLE;
1163 buf[15] = 0;
1164
1165 /* flush fifos */
1166 buf[16] = DIGI_CMD_IFLUSH_FIFO;
1167 buf[17] = priv->dp_port_num;
1168 buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1169 buf[19] = 0;
1170
1171 ret = digi_write_oob_command(port, buf, 20, 0);
1172 if (ret != 0)
1173 dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
1174 ret);
1175 /* wait for final commands on oob port to complete */
1176 prepare_to_wait(&priv->dp_flush_wait, &wait,
1177 TASK_INTERRUPTIBLE);
1178 schedule_timeout(DIGI_CLOSE_TIMEOUT);
1179 finish_wait(&priv->dp_flush_wait, &wait);
1180
1181 /* shutdown any outstanding bulk writes */
1182 usb_kill_urb(port->write_urb);
1183 exit:
1184 spin_lock_irq(&priv->dp_port_lock);
1185 priv->dp_write_urb_in_use = 0;
1186 wake_up_interruptible(&priv->dp_close_wait);
1187 spin_unlock_irq(&priv->dp_port_lock);
1188 mutex_unlock(&port->serial->disc_mutex);
1189 }
1190
1191
1192 /*
1193 * Digi Startup Device
1194 *
1195 * Starts reads on all ports. Must be called AFTER startup, with
1196 * urbs initialized. Returns 0 if successful, non-zero error otherwise.
1197 */
1198
1199 static int digi_startup_device(struct usb_serial *serial)
1200 {
1201 int i, ret = 0;
1202 struct digi_serial *serial_priv = usb_get_serial_data(serial);
1203 struct usb_serial_port *port;
1204
1205 /* be sure this happens exactly once */
1206 spin_lock(&serial_priv->ds_serial_lock);
1207 if (serial_priv->ds_device_started) {
1208 spin_unlock(&serial_priv->ds_serial_lock);
1209 return 0;
1210 }
1211 serial_priv->ds_device_started = 1;
1212 spin_unlock(&serial_priv->ds_serial_lock);
1213
1214 /* start reading from each bulk in endpoint for the device */
1215 /* set USB_DISABLE_SPD flag for write bulk urbs */
1216 for (i = 0; i < serial->type->num_ports + 1; i++) {
1217 port = serial->port[i];
1218 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
1219 if (ret != 0) {
1220 dev_err(&port->dev,
1221 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1222 __func__, ret, i);
1223 break;
1224 }
1225 }
1226 return ret;
1227 }
1228
1229 static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
1230 {
1231 struct digi_port *priv;
1232
1233 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1234 if (!priv)
1235 return -ENOMEM;
1236
1237 spin_lock_init(&priv->dp_port_lock);
1238 priv->dp_port_num = port_num;
1239 init_waitqueue_head(&priv->dp_transmit_idle_wait);
1240 init_waitqueue_head(&priv->dp_flush_wait);
1241 init_waitqueue_head(&priv->dp_close_wait);
1242 INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
1243 priv->dp_port = port;
1244
1245 init_waitqueue_head(&port->write_wait);
1246
1247 usb_set_serial_port_data(port, priv);
1248
1249 return 0;
1250 }
1251
1252 static int digi_startup(struct usb_serial *serial)
1253 {
1254 struct digi_serial *serial_priv;
1255 int ret;
1256
1257 serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
1258 if (!serial_priv)
1259 return -ENOMEM;
1260
1261 spin_lock_init(&serial_priv->ds_serial_lock);
1262 serial_priv->ds_oob_port_num = serial->type->num_ports;
1263 serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
1264
1265 ret = digi_port_init(serial_priv->ds_oob_port,
1266 serial_priv->ds_oob_port_num);
1267 if (ret) {
1268 kfree(serial_priv);
1269 return ret;
1270 }
1271
1272 usb_set_serial_data(serial, serial_priv);
1273
1274 return 0;
1275 }
1276
1277
1278 static void digi_disconnect(struct usb_serial *serial)
1279 {
1280 int i;
1281
1282 /* stop reads and writes on all ports */
1283 for (i = 0; i < serial->type->num_ports + 1; i++) {
1284 usb_kill_urb(serial->port[i]->read_urb);
1285 usb_kill_urb(serial->port[i]->write_urb);
1286 }
1287 }
1288
1289
1290 static void digi_release(struct usb_serial *serial)
1291 {
1292 struct digi_serial *serial_priv;
1293 struct digi_port *priv;
1294
1295 serial_priv = usb_get_serial_data(serial);
1296
1297 priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
1298 kfree(priv);
1299
1300 kfree(serial_priv);
1301 }
1302
1303 static int digi_port_probe(struct usb_serial_port *port)
1304 {
1305 return digi_port_init(port, port->port_number);
1306 }
1307
1308 static int digi_port_remove(struct usb_serial_port *port)
1309 {
1310 struct digi_port *priv;
1311
1312 priv = usb_get_serial_port_data(port);
1313 kfree(priv);
1314
1315 return 0;
1316 }
1317
1318 static void digi_read_bulk_callback(struct urb *urb)
1319 {
1320 struct usb_serial_port *port = urb->context;
1321 struct digi_port *priv;
1322 struct digi_serial *serial_priv;
1323 int ret;
1324 int status = urb->status;
1325
1326 /* port sanity check, do not resubmit if port is not valid */
1327 if (port == NULL)
1328 return;
1329 priv = usb_get_serial_port_data(port);
1330 if (priv == NULL) {
1331 dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
1332 __func__, status);
1333 return;
1334 }
1335 if (port->serial == NULL ||
1336 (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
1337 dev_err(&port->dev, "%s: serial is bad or serial->private "
1338 "is NULL, status=%d\n", __func__, status);
1339 return;
1340 }
1341
1342 /* do not resubmit urb if it has any status error */
1343 if (status) {
1344 dev_err(&port->dev,
1345 "%s: nonzero read bulk status: status=%d, port=%d\n",
1346 __func__, status, priv->dp_port_num);
1347 return;
1348 }
1349
1350 /* handle oob or inb callback, do not resubmit if error */
1351 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1352 if (digi_read_oob_callback(urb) != 0)
1353 return;
1354 } else {
1355 if (digi_read_inb_callback(urb) != 0)
1356 return;
1357 }
1358
1359 /* continue read */
1360 ret = usb_submit_urb(urb, GFP_ATOMIC);
1361 if (ret != 0 && ret != -EPERM) {
1362 dev_err(&port->dev,
1363 "%s: failed resubmitting urb, ret=%d, port=%d\n",
1364 __func__, ret, priv->dp_port_num);
1365 }
1366
1367 }
1368
1369 /*
1370 * Digi Read INB Callback
1371 *
1372 * Digi Read INB Callback handles reads on the in band ports, sending
1373 * the data on to the tty subsystem. When called we know port and
1374 * port->private are not NULL and port->serial has been validated.
1375 * It returns 0 if successful, 1 if successful but the port is
1376 * throttled, and -1 if the sanity checks failed.
1377 */
1378
1379 static int digi_read_inb_callback(struct urb *urb)
1380 {
1381 struct usb_serial_port *port = urb->context;
1382 struct digi_port *priv = usb_get_serial_port_data(port);
1383 unsigned char *buf = urb->transfer_buffer;
1384 unsigned long flags;
1385 int opcode;
1386 int len;
1387 int port_status;
1388 unsigned char *data;
1389 int tty_flag, throttled;
1390
1391 /* short/multiple packet check */
1392 if (urb->actual_length < 2) {
1393 dev_warn(&port->dev, "short packet received\n");
1394 return -1;
1395 }
1396
1397 opcode = buf[0];
1398 len = buf[1];
1399
1400 if (urb->actual_length != len + 2) {
1401 dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
1402 priv->dp_port_num, opcode, len, urb->actual_length);
1403 return -1;
1404 }
1405
1406 if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
1407 dev_err(&port->dev, "malformed data packet received\n");
1408 return -1;
1409 }
1410
1411 spin_lock_irqsave(&priv->dp_port_lock, flags);
1412
1413 /* check for throttle; if set, do not resubmit read urb */
1414 /* indicate the read chain needs to be restarted on unthrottle */
1415 throttled = priv->dp_throttled;
1416 if (throttled)
1417 priv->dp_throttle_restart = 1;
1418
1419 /* receive data */
1420 if (opcode == DIGI_CMD_RECEIVE_DATA) {
1421 port_status = buf[2];
1422 data = &buf[3];
1423
1424 /* get flag from port_status */
1425 tty_flag = 0;
1426
1427 /* overrun is special, not associated with a char */
1428 if (port_status & DIGI_OVERRUN_ERROR)
1429 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1430
1431 /* break takes precedence over parity, */
1432 /* which takes precedence over framing errors */
1433 if (port_status & DIGI_BREAK_ERROR)
1434 tty_flag = TTY_BREAK;
1435 else if (port_status & DIGI_PARITY_ERROR)
1436 tty_flag = TTY_PARITY;
1437 else if (port_status & DIGI_FRAMING_ERROR)
1438 tty_flag = TTY_FRAME;
1439
1440 /* data length is len-1 (one byte of len is port_status) */
1441 --len;
1442 if (len > 0) {
1443 tty_insert_flip_string_fixed_flag(&port->port, data,
1444 tty_flag, len);
1445 tty_flip_buffer_push(&port->port);
1446 }
1447 }
1448 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1449
1450 if (opcode == DIGI_CMD_RECEIVE_DISABLE)
1451 dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
1452 else if (opcode != DIGI_CMD_RECEIVE_DATA)
1453 dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
1454
1455 return throttled ? 1 : 0;
1456
1457 }
1458
1459
1460 /*
1461 * Digi Read OOB Callback
1462 *
1463 * Digi Read OOB Callback handles reads on the out of band port.
1464 * When called we know port and port->private are not NULL and
1465 * the port->serial is valid. It returns 0 if successful, and
1466 * -1 if the sanity checks failed.
1467 */
1468
1469 static int digi_read_oob_callback(struct urb *urb)
1470 {
1471
1472 struct usb_serial_port *port = urb->context;
1473 struct usb_serial *serial = port->serial;
1474 struct tty_struct *tty;
1475 struct digi_port *priv;
1476 unsigned char *buf = urb->transfer_buffer;
1477 int opcode, line, status, val;
1478 unsigned long flags;
1479 int i;
1480 unsigned int rts;
1481
1482 if (urb->actual_length < 4)
1483 return -1;
1484
1485 /* handle each oob command */
1486 for (i = 0; i < urb->actual_length - 3; i += 4) {
1487 opcode = buf[i];
1488 line = buf[i + 1];
1489 status = buf[i + 2];
1490 val = buf[i + 3];
1491
1492 dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
1493 opcode, line, status, val);
1494
1495 if (status != 0 || line >= serial->type->num_ports)
1496 continue;
1497
1498 port = serial->port[line];
1499
1500 priv = usb_get_serial_port_data(port);
1501 if (priv == NULL)
1502 return -1;
1503
1504 tty = tty_port_tty_get(&port->port);
1505
1506 rts = 0;
1507 if (tty)
1508 rts = C_CRTSCTS(tty);
1509
1510 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
1511 spin_lock_irqsave(&priv->dp_port_lock, flags);
1512 /* convert from digi flags to termiox flags */
1513 if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
1514 priv->dp_modem_signals |= TIOCM_CTS;
1515 /* port must be open to use tty struct */
1516 if (rts)
1517 tty_port_tty_wakeup(&port->port);
1518 } else {
1519 priv->dp_modem_signals &= ~TIOCM_CTS;
1520 /* port must be open to use tty struct */
1521 }
1522 if (val & DIGI_READ_INPUT_SIGNALS_DSR)
1523 priv->dp_modem_signals |= TIOCM_DSR;
1524 else
1525 priv->dp_modem_signals &= ~TIOCM_DSR;
1526 if (val & DIGI_READ_INPUT_SIGNALS_RI)
1527 priv->dp_modem_signals |= TIOCM_RI;
1528 else
1529 priv->dp_modem_signals &= ~TIOCM_RI;
1530 if (val & DIGI_READ_INPUT_SIGNALS_DCD)
1531 priv->dp_modem_signals |= TIOCM_CD;
1532 else
1533 priv->dp_modem_signals &= ~TIOCM_CD;
1534
1535 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1536 } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
1537 spin_lock_irqsave(&priv->dp_port_lock, flags);
1538 priv->dp_transmit_idle = 1;
1539 wake_up_interruptible(&priv->dp_transmit_idle_wait);
1540 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1541 } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
1542 wake_up_interruptible(&priv->dp_flush_wait);
1543 }
1544 tty_kref_put(tty);
1545 }
1546 return 0;
1547
1548 }
1549
1550 module_usb_serial_driver(serial_drivers, id_table_combined);
1551
1552 MODULE_AUTHOR(DRIVER_AUTHOR);
1553 MODULE_DESCRIPTION(DRIVER_DESC);
1554 MODULE_LICENSE("GPL");
Linux with added FPC-III support