x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / arm / boot / dts / exynos3250-artik5.dtsi
blob59c89d7662a8004b03f52cbdab7d3f9903bf9326
1 /*
2  * Samsung's Exynos3250 based ARTIK5 module device tree source
3  *
4  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * Device tree source file for Samsung's ARTIK5 module which is based on
8  * Samsung Exynos3250 SoC.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
15 #include "exynos3250.dtsi"
16 #include <dt-bindings/clock/samsung,s2mps11.h>
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/interrupt-controller/irq.h>
20 / {
21         compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
23         chosen {
24                 stdout-path = &serial_2;
25         };
27         memory@40000000 {
28                 device_type = "memory";
29                 reg = <0x40000000 0x1ff00000>;
30         };
32         firmware@0205f000 {
33                 compatible = "samsung,secure-firmware";
34                 reg = <0x0205f000 0x1000>;
35         };
37         thermal-zones {
38                 cpu_thermal: cpu-thermal {
39                         cooling-maps {
40                                 map0 {
41                                         /* Corresponds to 500MHz */
42                                         cooling-device = <&cpu0 5 5>;
43                                 };
44                                 map1 {
45                                         /* Corresponds to 200MHz */
46                                         cooling-device = <&cpu0 8 8>;
47                                 };
48                         };
49                 };
50         };
53 &adc {
54         vdd-supply = <&ldo7_reg>;
55         assigned-clocks = <&cmu CLK_SCLK_TSADC>;
56         assigned-clock-rates = <6000000>;
59 &cpu0 {
60         cpu0-supply = <&buck2_reg>;
63 &i2c_0 {
64         #address-cells = <1>;
65         #size-cells = <0>;
66         samsung,i2c-sda-delay = <100>;
67         samsung,i2c-slave-addr = <0x10>;
68         samsung,i2c-max-bus-freq = <100000>;
69         status = "okay";
71         s2mps14_pmic@66 {
72                 compatible = "samsung,s2mps14-pmic";
73                 interrupt-parent = <&gpx3>;
74                 interrupts = <5 IRQ_TYPE_NONE>;
75                 reg = <0x66>;
77                 s2mps14_osc: clocks {
78                         compatible = "samsung,s2mps14-clk";
79                         #clock-cells = <1>;
80                         clock-output-names = "s2mps14_ap", "unused",
81                                 "s2mps14_bt";
82                 };
84                 regulators {
85                         ldo1_reg: LDO1 {
86                                 /* VDD_ALIVE15x */
87                                 regulator-name = "VLDO1_1.0V";
88                                 regulator-min-microvolt = <1000000>;
89                                 regulator-max-microvolt = <1000000>;
90                                 regulator-always-on;
91                         };
93                         ldo2_reg: LDO2 {
94                                 /* VDDQM176 ~ VDDQM185 */
95                                 regulator-name = "VLDO2_1.2V";
96                                 regulator-min-microvolt = <1200000>;
97                                 regulator-max-microvolt = <1200000>;
98                                 regulator-always-on;
99                         };
101                         ldo3_reg: LDO3 {
102                                 /*
103                                  * VDD1_E106 ~ VDD1_E111
104                                  * DVDD_RTC_AP, DVDD_MMC2_AP
105                                  */
106                                 regulator-name = "VLDO3_1.8V";
107                                 regulator-min-microvolt = <1800000>;
108                                 regulator-max-microvolt = <1800000>;
109                                 regulator-always-on;
110                         };
112                         ldo4_reg: LDO4 {
113                                 /*  AVDD_PLL1120 ~ AVDD_PLL11201 */
114                                 regulator-name = "VLDO4_1.8V";
115                                 regulator-min-microvolt = <1800000>;
116                                 regulator-max-microvolt = <1800000>;
117                                 regulator-always-on;
118                         };
120                         ldo5_reg: LDO5 {
121                                 /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
122                                 regulator-name = "VLDO5_1.0V";
123                                 regulator-min-microvolt = <1000000>;
124                                 regulator-max-microvolt = <1000000>;
125                                 regulator-always-on;
126                         };
128                         ldo6_reg: LDO6 {
129                                 /* VDD_USB, VDD10_HSIC */
130                                 regulator-name = "VLDO6_1.0V";
131                                 regulator-min-microvolt = <1000000>;
132                                 regulator-max-microvolt = <1000000>;
133                                 regulator-always-on;
134                         };
136                         ldo7_reg: LDO7 {
137                                 /*
138                                  * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
139                                  * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
140                                  */
141                                 regulator-name = "VLDO7_1.8V";
142                                 regulator-min-microvolt = <1800000>;
143                                 regulator-max-microvolt = <1800000>;
144                                 regulator-always-on;
145                         };
147                         ldo8_reg: LDO8 {
148                                 /* AVDD33_UOTG */
149                                 regulator-name = "VLDO8_3.0V";
150                                 regulator-min-microvolt = <3000000>;
151                                 regulator-max-microvolt = <3000000>;
152                                 regulator-always-on;
153                         };
155                         ldo9_reg: LDO9 {
156                                 /* VDDQ_E86 ~ VDDQ_E105*/
157                                 regulator-name = "VLDO9_1.2V";
158                                 regulator-min-microvolt = <1200000>;
159                                 regulator-max-microvolt = <1200000>;
160                                 regulator-always-on;
161                         };
163                         ldo10_reg: LDO10 {
164                                 regulator-name = "VLDO10_1.0V";
165                                 regulator-min-microvolt = <1000000>;
166                                 regulator-max-microvolt = <1000000>;
167                         };
169                         ldo11_reg: LDO11 {
170                                 /* VDD74 ~ VDD75 */
171                                 regulator-name = "VLDO11_1.8V";
172                                 regulator-min-microvolt = <1800000>;
173                                 regulator-max-microvolt = <1800000>;
174                                 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
175                         };
177                         ldo12_reg: LDO12 {
178                                 /* VDD72 ~ VDD73 */
179                                 regulator-name = "VLDO12_2.8V";
180                                 regulator-min-microvolt = <2800000>;
181                                 regulator-max-microvolt = <2800000>;
182                                 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
183                         };
185                         ldo13_reg: LDO13 {
186                                 regulator-name = "VLDO13_2.8V";
187                                 regulator-min-microvolt = <2800000>;
188                                 regulator-max-microvolt = <2800000>;
189                         };
191                         ldo14_reg: LDO14 {
192                                 regulator-name = "VLDO14_2.7V";
193                                 regulator-min-microvolt = <2700000>;
194                                 regulator-max-microvolt = <2700000>;
195                         };
197                         ldo15_reg: LDO15 {
198                                 regulator-name = "VLDO_3.3V";
199                                 regulator-min-microvolt = <3300000>;
200                                 regulator-max-microvolt = <3300000>;
201                         };
203                         ldo16_reg: LDO16 {
204                                 regulator-name = "VLDO16_3.3V";
205                                 regulator-min-microvolt = <3300000>;
206                                 regulator-max-microvolt = <3300000>;
207                         };
209                         ldo17_reg: LDO17 {
210                                 regulator-name = "VLDO17_3.0V";
211                                 regulator-min-microvolt = <3000000>;
212                                 regulator-max-microvolt = <3000000>;
213                         };
215                         ldo18_reg: LDO18 {
216                                 /* DVDD_MMC2_AP */
217                                 regulator-name = "VLDO18_2.8V";
218                                 regulator-min-microvolt = <2800000>;
219                                 regulator-max-microvolt = <2800000>;
220                         };
222                         ldo19_reg: LDO19 {
223                                 regulator-name = "VLDO19_1.8V";
224                                 regulator-min-microvolt = <1800000>;
225                                 regulator-max-microvolt = <1800000>;
226                         };
228                         ldo20_reg: LDO20 {
229                                 regulator-name = "VLDO20_1.8V";
230                                 regulator-min-microvolt = <1800000>;
231                                 regulator-max-microvolt = <1800000>;
232                         };
234                         ldo21_reg: LDO21 {
235                                 regulator-name = "VLDO21_1.25V";
236                                 regulator-min-microvolt = <1250000>;
237                                 regulator-max-microvolt = <1250000>;
238                         };
240                         ldo22_reg: LDO22 {
241                                 regulator-name = "VLDO22_1.2V";
242                                 regulator-min-microvolt = <1200000>;
243                                 regulator-max-microvolt = <1200000>;
244                         };
246                         ldo23_reg: LDO23 {
247                                 /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
248                                 regulator-name = "VLDO23_1.8V";
249                                 regulator-min-microvolt = <1800000>;
250                                 regulator-max-microvolt = <1800000>;
251                         };
253                         ldo24_reg: LDO24 {
254                                 regulator-name = "VLDO24_3.0V";
255                                 regulator-min-microvolt = <3000000>;
256                                 regulator-max-microvolt = <3000000>;
257                         };
259                         ldo25_reg: LDO25 {
260                                 regulator-name = "VLDO25_3.0V";
261                                 regulator-min-microvolt = <3000000>;
262                                 regulator-max-microvolt = <3000000>;
263                         };
265                         buck1_reg: BUCK1 {
266                                 /* VDD_MIF */
267                                 regulator-name = "VBUCK1_1.0V";
268                                 regulator-min-microvolt = <800000>;
269                                 regulator-max-microvolt = <1000000>;
270                                 regulator-always-on;
271                         };
273                         buck2_reg: BUCK2 {
274                                 /* VDD_CPU */
275                                 regulator-name = "VBUCK2_1.2V";
276                                 regulator-min-microvolt = <850000>;
277                                 regulator-max-microvolt = <1200000>;
278                                 regulator-always-on;
279                         };
281                         buck3_reg: BUCK3 {
282                                 /* VDD_G3D */
283                                 regulator-name = "VBUCK3_1.0V";
284                                 regulator-min-microvolt = <850000>;
285                                 regulator-max-microvolt = <1000000>;
286                                 regulator-always-on;
287                         };
289                         buck4_reg: BUCK4 {
290                                 regulator-name = "VBUCK4_1.95V";
291                                 regulator-min-microvolt = <1950000>;
292                                 regulator-max-microvolt = <1950000>;
293                                 regulator-always-on;
294                         };
296                         buck5_reg: BUCK5 {
297                                 regulator-name = "VBUCK5_1.35V";
298                                 regulator-min-microvolt = <1350000>;
299                                 regulator-max-microvolt = <1350000>;
300                                 regulator-always-on;
301                         };
302                 };
303         };
306 &mshc_0 {
307         num-slots = <1>;
308         non-removable;
309         cap-mmc-highspeed;
310         card-detect-delay = <200>;
311         vmmc-supply = <&ldo12_reg>;
312         clock-frequency = <100000000>;
313         max-frequency = <100000000>;
314         samsung,dw-mshc-ciu-div = <1>;
315         samsung,dw-mshc-sdr-timing = <0 1>;
316         samsung,dw-mshc-ddr-timing = <1 2>;
317         pinctrl-names = "default";
318         pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
319         bus-width = <8>;
320         status = "okay";
323 &rtc {
324         clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
325         clock-names = "rtc", "rtc_src";
326         status = "okay";
329 &tmu {
330         status = "okay";
333 &xusbxti {
334         clock-frequency = <24000000>;