x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / arm / boot / dts / exynos5410-smdk5410.dts
blob6cc74d97daaea595d8b6d0ece1d10c773a71f720
1 /*
2  * SAMSUNG SMDK5410 board device tree source
3  *
4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
12 /dts-v1/;
13 #include "exynos5410.dtsi"
14 #include <dt-bindings/interrupt-controller/irq.h>
15 / {
16         model = "Samsung SMDK5410 board based on EXYNOS5410";
17         compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
19         memory@40000000 {
20                 device_type = "memory";
21                 reg = <0x40000000 0x80000000>;
22         };
24         chosen {
25                 bootargs = "console=ttySAC2,115200";
26         };
28         fin_pll: xxti {
29                 compatible = "fixed-clock";
30                 clock-frequency = <24000000>;
31                 clock-output-names = "fin_pll";
32                 #clock-cells = <0>;
33         };
35         firmware@02037000 {
36                 compatible = "samsung,secure-firmware";
37                 reg = <0x02037000 0x1000>;
38         };
42 &mmc_0 {
43         status = "okay";
44         num-slots = <1>;
45         cap-mmc-highspeed;
46         broken-cd;
47         card-detect-delay = <200>;
48         samsung,dw-mshc-ciu-div = <3>;
49         samsung,dw-mshc-sdr-timing = <2 3>;
50         samsung,dw-mshc-ddr-timing = <1 2>;
51         bus-width = <8>;
54 &mmc_2 {
55         status = "okay";
56         num-slots = <1>;
57         cap-sd-highspeed;
58         card-detect-delay = <200>;
59         samsung,dw-mshc-ciu-div = <3>;
60         samsung,dw-mshc-sdr-timing = <2 3>;
61         samsung,dw-mshc-ddr-timing = <1 2>;
62         bus-width = <4>;
63         disable-wp;
66 &pinctrl_0 {
67         srom_ctl: srom-ctl {
68                 samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
69                                "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
70                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
71                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
72         };
74         srom_ebi: srom-ebi {
75                 samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
76                                "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
77                                "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
78                                "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
79                                "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
80                                "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
81                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
82                 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
83                 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
84         };
87 &sromc {
88         pinctrl-names = "default";
89         pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
91         ethernet@3,0 {
92                 compatible = "smsc,lan9115";
93                 reg = <3 0 0x10000>;
94                 phy-mode = "mii";
95                 interrupt-parent = <&gpx0>;
96                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
97                 reg-io-width = <2>;
98                 smsc,irq-push-pull;
99                 smsc,force-internal-phy;
101                 samsung,srom-page-mode;
102                 samsung,srom-timing = <9 12 1 9 1 1>;
103         };
106 &serial_0 {
107         status = "okay";
110 &serial_1 {
111         status = "okay";
114 &serial_2 {
115         status = "okay";