arch/arm/boot/dts/imx53-qsb-common.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include "imx53.dtsi"
  14
  15 / {
  16         chosen {
  17                 stdout-path = &uart1;
  18         };
  19
  20         memory {
  21                 reg = <0x70000000 0x20000000>,
  22                       <0xb0000000 0x20000000>;
  23         };
  24
  25         display0: display@di0 {
  26                 compatible = "fsl,imx-parallel-display";
  27                 interface-pix-fmt = "rgb565";
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&pinctrl_ipu_disp0>;
  30                 status = "disabled";
  31                 display-timings {
  32                         claawvga {
  33                                 native-mode;
  34                                 clock-frequency = <27000000>;
  35                                 hactive = <800>;
  36                                 vactive = <480>;
  37                                 hback-porch = <40>;
  38                                 hfront-porch = <60>;
  39                                 vback-porch = <10>;
  40                                 vfront-porch = <10>;
  41                                 hsync-len = <20>;
  42                                 vsync-len = <10>;
  43                                 hsync-active = <0>;
  44                                 vsync-active = <0>;
  45                                 de-active = <1>;
  46                                 pixelclk-active = <0>;
  47                         };
  48                 };
  49
  50                 port {
  51                         display0_in: endpoint {
  52                                 remote-endpoint = <&ipu_di0_disp0>;
  53                         };
  54                 };
  55         };
  56
  57         gpio-keys {
  58                 compatible = "gpio-keys";
  59
  60                 power {
  61                         label = "Power Button";
  62                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_POWER>;
  64                 };
  65
  66                 volume-up {
  67                         label = "Volume Up";
  68                         gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_VOLUMEUP>;
  70                         wakeup-source;
  71                 };
  72
  73                 volume-down {
  74                         label = "Volume Down";
  75                         gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_VOLUMEDOWN>;
  77                         wakeup-source;
  78                 };
  79         };
  80
  81         leds {
  82                 compatible = "gpio-leds";
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&led_pin_gpio7_7>;
  85
  86                 user {
  87                         label = "Heartbeat";
  88                         gpios = <&gpio7 7 0>;
  89                         linux,default-trigger = "heartbeat";
  90                 };
  91         };
  92
  93         regulators {
  94                 compatible = "simple-bus";
  95                 #address-cells = <1>;
  96                 #size-cells = <0>;
  97
  98                 reg_3p2v: regulator@0 {
  99                         compatible = "regulator-fixed";
 100                         reg = <0>;
 101                         regulator-name = "3P2V";
 102                         regulator-min-microvolt = <3200000>;
 103                         regulator-max-microvolt = <3200000>;
 104                         regulator-always-on;
 105                 };
 106
 107                 reg_usb_vbus: regulator@1 {
 108                         compatible = "regulator-fixed";
 109                         reg = <1>;
 110                         regulator-name = "usb_vbus";
 111                         regulator-min-microvolt = <5000000>;
 112                         regulator-max-microvolt = <5000000>;
 113                         gpio = <&gpio7 8 0>;
 114                         enable-active-high;
 115                 };
 116         };
 117
 118         sound {
 119                 compatible = "fsl,imx53-qsb-sgtl5000",
 120                              "fsl,imx-audio-sgtl5000";
 121                 model = "imx53-qsb-sgtl5000";
 122                 ssi-controller = <&ssi2>;
 123                 audio-codec = <&sgtl5000>;
 124                 audio-routing =
 125                         "MIC_IN", "Mic Jack",
 126                         "Mic Jack", "Mic Bias",
 127                         "Headphone Jack", "HP_OUT";
 128                 mux-int-port = <2>;
 129                 mux-ext-port = <5>;
 130         };
 131 };
 132
 133 &esdhc1 {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&pinctrl_esdhc1>;
 136         status = "okay";
 137 };
 138
 139 &ipu_di0_disp0 {
 140         remote-endpoint = <&display0_in>;
 141 };
 142
 143 &ssi2 {
 144         status = "okay";
 145 };
 146
 147 &esdhc3 {
 148         pinctrl-names = "default";
 149         pinctrl-0 = <&pinctrl_esdhc3>;
 150         cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
 151         wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 152         bus-width = <8>;
 153         status = "okay";
 154 };
 155
 156 &iomuxc {
 157         pinctrl-names = "default";
 158         pinctrl-0 = <&pinctrl_hog>;
 159
 160         imx53-qsb {
 161                 pinctrl_hog: hoggrp {
 162                         fsl,pins = <
 163                                 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
 164                                 MX53_PAD_GPIO_8__GPIO1_8          0x80000000
 165                                 MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
 166                                 MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
 167                                 MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 168                                 MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
 169                                 MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
 170                                 MX53_PAD_PATA_DA_2__GPIO7_8       0x80000000
 171                                 MX53_PAD_GPIO_16__GPIO7_11        0x80000000
 172                         >;
 173                 };
 174
 175                 led_pin_gpio7_7: led_gpio7_7@0 {
 176                         fsl,pins = <
 177                                 MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
 178                         >;
 179                 };
 180
 181                 pinctrl_audmux: audmuxgrp {
 182                         fsl,pins = <
 183                                 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC      0x80000000
 184                                 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD      0x80000000
 185                                 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS     0x80000000
 186                                 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD      0x80000000
 187                         >;
 188                 };
 189
 190                 pinctrl_esdhc1: esdhc1grp {
 191                         fsl,pins = <
 192                                 MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
 193                                 MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
 194                                 MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
 195                                 MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
 196                                 MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
 197                                 MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
 198                         >;
 199                 };
 200
 201                 pinctrl_esdhc3: esdhc3grp {
 202                         fsl,pins = <
 203                                 MX53_PAD_PATA_DATA8__ESDHC3_DAT0        0x1d5
 204                                 MX53_PAD_PATA_DATA9__ESDHC3_DAT1        0x1d5
 205                                 MX53_PAD_PATA_DATA10__ESDHC3_DAT2       0x1d5
 206                                 MX53_PAD_PATA_DATA11__ESDHC3_DAT3       0x1d5
 207                                 MX53_PAD_PATA_DATA0__ESDHC3_DAT4        0x1d5
 208                                 MX53_PAD_PATA_DATA1__ESDHC3_DAT5        0x1d5
 209                                 MX53_PAD_PATA_DATA2__ESDHC3_DAT6        0x1d5
 210                                 MX53_PAD_PATA_DATA3__ESDHC3_DAT7        0x1d5
 211                                 MX53_PAD_PATA_RESET_B__ESDHC3_CMD       0x1d5
 212                                 MX53_PAD_PATA_IORDY__ESDHC3_CLK         0x1d5
 213                         >;
 214                 };
 215
 216                 pinctrl_fec: fecgrp {
 217                         fsl,pins = <
 218                                 MX53_PAD_FEC_MDC__FEC_MDC               0x4
 219                                 MX53_PAD_FEC_MDIO__FEC_MDIO             0x1fc
 220                                 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x180
 221                                 MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x180
 222                                 MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x180
 223                                 MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x180
 224                                 MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x180
 225                                 MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x4
 226                                 MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x4
 227                                 MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x4
 228                         >;
 229                 };
 230
 231                 /* open drain */
 232                 pinctrl_i2c1: i2c1grp {
 233                         fsl,pins = <
 234                                 MX53_PAD_CSI0_DAT8__I2C1_SDA            0x400001ec
 235                                 MX53_PAD_CSI0_DAT9__I2C1_SCL            0x400001ec
 236                         >;
 237                 };
 238
 239                 pinctrl_i2c2: i2c2grp {
 240                         fsl,pins = <
 241                                 MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
 242                                 MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
 243                         >;
 244                 };
 245
 246                 pinctrl_ipu_disp0: ipudisp0grp {
 247                         fsl,pins = <
 248                                 MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
 249                                 MX53_PAD_DI0_PIN15__IPU_DI0_PIN15       0x5
 250                                 MX53_PAD_DI0_PIN2__IPU_DI0_PIN2         0x5
 251                                 MX53_PAD_DI0_PIN3__IPU_DI0_PIN3         0x5
 252                                 MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0    0x5
 253                                 MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1    0x5
 254                                 MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2    0x5
 255                                 MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3    0x5
 256                                 MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4    0x5
 257                                 MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5    0x5
 258                                 MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6    0x5
 259                                 MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7    0x5
 260                                 MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8    0x5
 261                                 MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9    0x5
 262                                 MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10  0x5
 263                                 MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11  0x5
 264                                 MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12  0x5
 265                                 MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13  0x5
 266                                 MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14  0x5
 267                                 MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15  0x5
 268                                 MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16  0x5
 269                                 MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17  0x5
 270                                 MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18  0x5
 271                                 MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19  0x5
 272                                 MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20  0x5
 273                                 MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21  0x5
 274                                 MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22  0x5
 275                                 MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23  0x5
 276                         >;
 277                 };
 278
 279                 pinctrl_vga_sync: vgasync-grp {
 280                         fsl,pins = <
 281                                 /* VGA_HSYNC, VSYNC with max drive strength */
 282                                 MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
 283                                 MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
 284                         >;
 285                 };
 286
 287                 pinctrl_uart1: uart1grp {
 288                         fsl,pins = <
 289                                 MX53_PAD_CSI0_DAT10__UART1_TXD_MUX      0x1e4
 290                                 MX53_PAD_CSI0_DAT11__UART1_RXD_MUX      0x1e4
 291                         >;
 292                 };
 293         };
 294 };
 295
 296 &tve {
 297         pinctrl-names = "default";
 298         pinctrl-0 = <&pinctrl_vga_sync>;
 299         ddc-i2c-bus = <&i2c2>;
 300         fsl,tve-mode = "vga";
 301         fsl,hsync-pin = <7>;    /* IPU DI1 PIN7 via EIM_OE */
 302         fsl,vsync-pin = <8>;    /* IPU DI1 PIN8 via EIM_RW */
 303         status = "okay";
 304 };
 305
 306 &uart1 {
 307         pinctrl-names = "default";
 308         pinctrl-0 = <&pinctrl_uart1>;
 309         status = "okay";
 310 };
 311
 312 &i2c2 {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <&pinctrl_i2c2>;
 315         status = "okay";
 316
 317         sgtl5000: codec@0a {
 318                 compatible = "fsl,sgtl5000";
 319                 reg = <0x0a>;
 320                 VDDA-supply = <&reg_3p2v>;
 321                 VDDIO-supply = <&reg_3p2v>;
 322                 clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
 323         };
 324 };
 325
 326 &i2c1 {
 327         pinctrl-names = "default";
 328         pinctrl-0 = <&pinctrl_i2c1>;
 329         status = "okay";
 330
 331         accelerometer: mma8450@1c {
 332                 compatible = "fsl,mma8450";
 333                 reg = <0x1c>;
 334         };
 335 };
 336
 337 &audmux {
 338         pinctrl-names = "default";
 339         pinctrl-0 = <&pinctrl_audmux>;
 340         status = "okay";
 341 };
 342
 343 &fec {
 344         pinctrl-names = "default";
 345         pinctrl-0 = <&pinctrl_fec>;
 346         phy-mode = "rmii";
 347         phy-reset-gpios = <&gpio7 6 0>;
 348         status = "okay";
 349 };
 350
 351 &sata {
 352         status = "okay";
 353 };
 354
 355 &vpu {
 356         status = "okay";
 357 };
 358
 359 &usbh1 {
 360         vbus-supply = <&reg_usb_vbus>;
 361         phy_type = "utmi";
 362         status = "okay";
 363 };
 364
 365 &usbotg {
 366         dr_mode = "peripheral";
 367         status = "okay";
 368 };