arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi

   1 /*
   2  * support for the imx6 based aristainetos2 board
   3  *
   4  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License
  13  *     version 2 as published by the Free Software Foundation.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/clock/imx6qdl-clock.h>
  45
  46 / {
  47         backlight: backlight {
  48                 compatible = "pwm-backlight";
  49                 pwms = <&pwm1 0 5000000>;
  50                 brightness-levels = <0 4 8 16 32 64 128 255>;
  51                 default-brightness-level = <7>;
  52                 enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
  53         };
  54
  55         regulators {
  56                 compatible = "simple-bus";
  57
  58                 reg_2p5v: 2p5v {
  59                         compatible = "regulator-fixed";
  60                         regulator-name = "2P5V";
  61                         regulator-min-microvolt = <2500000>;
  62                         regulator-max-microvolt = <2500000>;
  63                         regulator-always-on;
  64                 };
  65
  66                 reg_3p3v: 3p3v {
  67                         compatible = "regulator-fixed";
  68                         regulator-name = "3P3V";
  69                         regulator-min-microvolt = <3300000>;
  70                         regulator-max-microvolt = <3300000>;
  71                         regulator-always-on;
  72                 };
  73
  74                 reg_usbh1_vbus: usb-h1-vbus {
  75                         compatible = "regulator-fixed";
  76                         enable-active-high;
  77                         gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
  78                         pinctrl-names = "default";
  79                         pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
  80                         regulator-name = "usb_h1_vbus";
  81                         regulator-min-microvolt = <5000000>;
  82                         regulator-max-microvolt = <5000000>;
  83                 };
  84
  85                 reg_usbotg_vbus: usb-otg-vbus {
  86                         compatible = "regulator-fixed";
  87                         enable-active-high;
  88                         gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
  89                         pinctrl-names = "default";
  90                         pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
  91                         regulator-name = "usb_otg_vbus";
  92                         regulator-min-microvolt = <5000000>;
  93                         regulator-max-microvolt = <5000000>;
  94                 };
  95         };
  96 };
  97
  98 &audmux {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_audmux>;
 101         status = "okay";
 102 };
 103
 104 &can1 {
 105         pinctrl-names = "default";
 106         pinctrl-0 = <&pinctrl_flexcan1>;
 107         status = "okay";
 108 };
 109
 110 &can2 {
 111         pinctrl-names = "default";
 112         pinctrl-0 = <&pinctrl_flexcan2>;
 113         status = "okay";
 114 };
 115
 116 &ecspi1 {
 117         cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
 118                     &gpio4 10 GPIO_ACTIVE_HIGH
 119                     &gpio4 11 GPIO_ACTIVE_HIGH>;
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&pinctrl_ecspi1>;
 122         status = "okay";
 123 };
 124
 125 &ecspi2 {
 126         cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
 127         pinctrl-names = "default";
 128         pinctrl-0 = <&pinctrl_ecspi2>;
 129         status = "okay";
 130 };
 131
 132 &ecspi4 {
 133         cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&pinctrl_ecspi4>;
 136         status = "okay";
 137
 138         flash: m25p80@1 {
 139                 #address-cells = <1>;
 140                 #size-cells = <1>;
 141                 compatible = "micron,n25q128a11", "jedec,spi-nor";
 142                 spi-max-frequency = <20000000>;
 143                 reg = <1>;
 144         };
 145 };
 146
 147 &i2c1 {
 148         pinctrl-names = "default";
 149         pinctrl-0 = <&pinctrl_i2c1>;
 150         status = "okay";
 151
 152         pmic@58 {
 153                 compatible = "dlg,da9063";
 154                 reg = <0x58>;
 155                 interrupt-parent = <&gpio1>;
 156                 interrupts = <04 0x8>;
 157
 158                 regulators {
 159                         bcore1 {
 160                                 regulator-name = "bcore1";
 161                                 regulator-always-on = <1>;
 162                                 regulator-min-microvolt = <300000>;
 163                                 regulator-max-microvolt = <3300000>;
 164                         };
 165
 166                         bcore2 {
 167                                 regulator-name = "bcore2";
 168                                 regulator-always-on = <1>;
 169                                 regulator-min-microvolt = <300000>;
 170                                 regulator-max-microvolt = <3300000>;
 171                         };
 172
 173                         bpro {
 174                                 regulator-name = "bpro";
 175                                 regulator-always-on = <1>;
 176                                 regulator-min-microvolt = <300000>;
 177                                 regulator-max-microvolt = <3300000>;
 178                         };
 179
 180                         bperi {
 181                                 regulator-name = "bperi";
 182                                 regulator-always-on = <1>;
 183                                 regulator-min-microvolt = <300000>;
 184                                 regulator-max-microvolt = <3300000>;
 185                         };
 186
 187                         bmem {
 188                                 regulator-name = "bmem";
 189                                 regulator-always-on = <1>;
 190                                 regulator-min-microvolt = <300000>;
 191                                 regulator-max-microvolt = <3300000>;
 192                         };
 193
 194                         ldo2 {
 195                                 regulator-name = "ldo2";
 196                                 regulator-always-on = <1>;
 197                                 regulator-min-microvolt = <300000>;
 198                                 regulator-max-microvolt = <1800000>;
 199                         };
 200
 201                         ldo3 {
 202                                 regulator-name = "ldo3";
 203                                 regulator-always-on = <1>;
 204                                 regulator-min-microvolt = <300000>;
 205                                 regulator-max-microvolt = <3300000>;
 206                         };
 207
 208                         ldo4 {
 209                                 regulator-name = "ldo4";
 210                                 regulator-always-on = <1>;
 211                                 regulator-min-microvolt = <300000>;
 212                                 regulator-max-microvolt = <3300000>;
 213                         };
 214
 215                         ldo5 {
 216                                 regulator-name = "ldo5";
 217                                 regulator-always-on = <1>;
 218                                 regulator-min-microvolt = <300000>;
 219                                 regulator-max-microvolt = <3300000>;
 220                         };
 221
 222                         ldo6 {
 223                                 regulator-name = "ldo6";
 224                                 regulator-always-on = <1>;
 225                                 regulator-min-microvolt = <300000>;
 226                                 regulator-max-microvolt = <3300000>;
 227                         };
 228
 229                         ldo7 {
 230                                 regulator-name = "ldo7";
 231                                 regulator-always-on = <1>;
 232                                 regulator-min-microvolt = <300000>;
 233                                 regulator-max-microvolt = <3300000>;
 234                         };
 235
 236                         ldo8 {
 237                                 regulator-name = "ldo8";
 238                                 regulator-always-on = <1>;
 239                                 regulator-min-microvolt = <300000>;
 240                                 regulator-max-microvolt = <3300000>;
 241                         };
 242
 243                         ldo9 {
 244                                 regulator-name = "ldo9";
 245                                 regulator-always-on = <1>;
 246                                 regulator-min-microvolt = <300000>;
 247                                 regulator-max-microvolt = <3300000>;
 248                         };
 249
 250                         ldo10 {
 251                                 regulator-name = "ldo10";
 252                                 regulator-always-on = <1>;
 253                                 regulator-min-microvolt = <300000>;
 254                                 regulator-max-microvolt = <3300000>;
 255                         };
 256
 257                         ldo11 {
 258                                 regulator-name = "ldo11";
 259                                 regulator-always-on = <1>;
 260                                 regulator-min-microvolt = <300000>;
 261                                 regulator-max-microvolt = <3300000>;
 262                         };
 263
 264                         bio {
 265                                 regulator-name = "bio";
 266                                 regulator-always-on = <1>;
 267                                 regulator-min-microvolt = <1800000>;
 268                                 regulator-max-microvolt = <1800000>;
 269                         };
 270                 };
 271         };
 272
 273         tmp103: tmp103@71 {
 274                 compatible = "ti,tmp103";
 275                 reg = <0x71>;
 276         };
 277 };
 278
 279 &i2c2 {
 280         pinctrl-names = "default";
 281         pinctrl-0 = <&pinctrl_i2c2>;
 282         status = "okay";
 283 };
 284
 285 &i2c3 {
 286         pinctrl-names = "default";
 287         pinctrl-0 = <&pinctrl_i2c3>;
 288         status = "okay";
 289
 290         expander: tca6416@20 {
 291                 compatible = "ti,tca6416";
 292                 reg = <0x20>;
 293                 #gpio-cells = <2>;
 294                 gpio-controller;
 295         };
 296
 297         rtc@68 {
 298                 compatible = "dallas,m41t00";
 299                 reg = <0x68>;
 300         };
 301 };
 302
 303 &i2c4 {
 304         pinctrl-names = "default";
 305         pinctrl-0 = <&pinctrl_i2c4>;
 306         status = "okay";
 307
 308         eeprom@50{
 309                 compatible = "atmel,24c64";
 310                 reg = <0x50>;
 311         };
 312
 313         eeprom@57{
 314                 compatible = "atmel,24c64";
 315                 reg = <0x57>;
 316         };
 317 };
 318
 319 &fec {
 320         pinctrl-names = "default";
 321         pinctrl-0 = <&pinctrl_enet>;
 322         phy-mode = "rgmii";
 323         phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 324         txd0-skew-ps = <0>;
 325         txd1-skew-ps = <0>;
 326         txd2-skew-ps = <0>;
 327         txd3-skew-ps = <0>;
 328         status = "okay";
 329 };
 330
 331 &gpmi {
 332         pinctrl-names = "default";
 333         pinctrl-0 = <&pinctrl_gpmi_nand>;
 334         status = "okay";
 335 };
 336
 337 &pcie {
 338         reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
 339         status = "okay";
 340 };
 341
 342 &pwm1 {
 343         pinctrl-names = "default";
 344         pinctrl-0 = <&pinctrl_pwm1>;
 345         status = "okay";
 346 };
 347
 348 &uart1 {
 349         pinctrl-names = "default";
 350         pinctrl-0 = <&pinctrl_uart1>;
 351         uart-has-rtscts;
 352         status = "okay";
 353 };
 354
 355 &uart2 {
 356         pinctrl-names = "default";
 357         pinctrl-0 = <&pinctrl_uart2>;
 358         status = "okay";
 359 };
 360
 361 &uart3 {
 362         pinctrl-names = "default";
 363         pinctrl-0 = <&pinctrl_uart3>;
 364         uart-has-rtscts;
 365         status = "okay";
 366 };
 367
 368 &uart4 {
 369         pinctrl-names = "default";
 370         pinctrl-0 = <&pinctrl_uart4>;
 371         status = "okay";
 372 };
 373
 374 &usbh1 {
 375         vbus-supply = <&reg_usbh1_vbus>;
 376         dr_mode = "host";
 377         status = "okay";
 378 };
 379
 380 &usbotg {
 381         vbus-supply = <&reg_usbotg_vbus>;
 382         pinctrl-names = "default";
 383         pinctrl-0 = <&pinctrl_usbotg>;
 384         disable-over-current;
 385         dr_mode = "host";
 386         status = "okay";
 387 };
 388
 389 &usdhc1 {
 390         pinctrl-names = "default";
 391         pinctrl-0 = <&pinctrl_usdhc1>;
 392         cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 393         no-1-8-v;
 394         status = "okay";
 395 };
 396
 397 &usdhc2 {
 398         pinctrl-names = "default";
 399         pinctrl-0 = <&pinctrl_usdhc2>;
 400         cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 401         wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 402         no-1-8-v;
 403         status = "okay";
 404 };
 405
 406 &iomuxc {
 407         pinctrl-names = "default";
 408         pinctrl-0 = <&pinctrl_gpio>;
 409
 410         pinctrl_audmux: audmux {
 411                 fsl,pins = <
 412                         MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
 413                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
 414                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
 415                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
 416                 >;
 417         };
 418
 419         pinctrl_ecspi1: ecspi1grp {
 420                 fsl,pins = <
 421                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
 422                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
 423                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
 424                         MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
 425                         MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
 426                         MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
 427                 >;
 428         };
 429
 430         pinctrl_ecspi2: ecspi2grp {
 431                 fsl,pins = <
 432                         MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
 433                         MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
 434                         MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
 435                         MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
 436                         MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
 437                 >;
 438         };
 439
 440         pinctrl_ecspi4: ecspi4grp {
 441                 fsl,pins = <
 442                         MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
 443                         MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
 444                         MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
 445                         MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
 446                         MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
 447                         MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
 448                 >;
 449         };
 450
 451         pinctrl_enet: enetgrp {
 452                 fsl,pins = <
 453                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 454                         MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 455                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
 456                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
 457                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
 458                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
 459                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
 460                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
 461                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
 462                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
 463                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
 464                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
 465                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
 466                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
 467                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
 468                 >;
 469         };
 470
 471         pinctrl_flexcan1: flexcan1grp {
 472                 fsl,pins = <
 473                         MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
 474                         MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
 475                 >;
 476         };
 477
 478         pinctrl_flexcan2: flexcan2grp {
 479                 fsl,pins = <
 480                         MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
 481                         MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
 482                 >;
 483         };
 484
 485         pinctrl_gpio: gpiogrp {
 486                 fsl,pins = <
 487                         MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x1b0b0 /* led enable */
 488                         MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x1b0b0 /* LCD power enable */
 489                         MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x1b0b0 /* led yellow */
 490                         MX6QDL_PAD_EIM_EB0__GPIO2_IO28          0x1b0b0 /* led red */
 491                         MX6QDL_PAD_EIM_A24__GPIO5_IO04          0x1b0b0 /* led green */
 492                         MX6QDL_PAD_EIM_EB1__GPIO2_IO29          0x1b0b0 /* led blue */
 493                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0 /* Profibus IRQ */
 494                         MX6QDL_PAD_SD3_DAT6__GPIO6_IO18         0x1b0b0 /* FPGA IRQ */
 495                         MX6QDL_PAD_EIM_A23__GPIO6_IO06          0x1b0b0 /* spi bus #2 SS driver enable */
 496                         MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
 497                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
 498                         MX6QDL_PAD_SD4_DAT1__GPIO2_IO09         0x1b0b0 /* Touchscreen IRQ */
 499                         MX6QDL_PAD_EIM_A22__GPIO2_IO16          0x1b0b0 /* PCIe reset */
 500                 >;
 501         };
 502
 503         pinctrl_gpmi_nand: gpmi-nand {
 504                 fsl,pins = <
 505                         MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
 506                         MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
 507                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
 508                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
 509                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
 510                         MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
 511                         MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
 512                         MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
 513                         MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
 514                         MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
 515                         MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
 516                         MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
 517                         MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
 518                         MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
 519                         MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
 520                 >;
 521         };
 522
 523         pinctrl_i2c1: i2c1grp {
 524                 fsl,pins = <
 525                         MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
 526                         MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
 527                 >;
 528         };
 529
 530         pinctrl_i2c2: i2c2grp {
 531                 fsl,pins = <
 532                         MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
 533                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
 534                 >;
 535         };
 536
 537         pinctrl_i2c3: i2c3grp {
 538                 fsl,pins = <
 539                         MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
 540                         MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
 541                 >;
 542         };
 543
 544         pinctrl_i2c4: i2c4grp {
 545                 fsl,pins = <
 546                         MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
 547                         MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
 548                 >;
 549         };
 550
 551         pinctrl_pwm1: pwm1grp {
 552                 fsl,pins = <
 553                         MX6QDL_PAD_GPIO_9__PWM1_OUT     0x1b0b0
 554                         MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */
 555                 >;
 556         };
 557
 558         pinctrl_uart1: uart1grp {
 559                 fsl,pins = <
 560                         MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 561                         MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 562                         MX6QDL_PAD_EIM_D20__UART1_RTS_B         0x1b0b1
 563                         MX6QDL_PAD_EIM_D19__UART1_CTS_B         0x1b0b1
 564                 >;
 565         };
 566
 567         pinctrl_uart2: uart2grp {
 568                 fsl,pins = <
 569                         MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
 570                         MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
 571                 >;
 572         };
 573
 574         pinctrl_uart3: uart3grp {
 575                 fsl,pins = <
 576                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
 577                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
 578                         MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
 579                         MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
 580                 >;
 581         };
 582
 583         pinctrl_uart4: uart4grp {
 584                 fsl,pins = <
 585                         MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
 586                         MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
 587                 >;
 588         };
 589
 590         pinctrl_usbotg: usbotggrp {
 591                 fsl,pins = <
 592                         MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
 593                 >;
 594         };
 595
 596         pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
 597                 fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
 598         };
 599
 600         pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
 601                 fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
 602         };
 603
 604         pinctrl_usdhc1: usdhc1grp {
 605                 fsl,pins = <
 606                         MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
 607                         MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
 608                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
 609                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
 610                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
 611                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
 612                         MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0 /* SD1 card detect input */
 613                         MX6QDL_PAD_DI0_PIN4__GPIO4_IO20         0x1b0b0 /* SD1 write protect input */
 614                 >;
 615         };
 616
 617         pinctrl_usdhc2: usdhc2grp {
 618                 fsl,pins = <
 619                         MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
 620                         MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
 621                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
 622                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
 623                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
 624                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
 625                         MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0 /* SD2 level shifter output enable */
 626                         MX6QDL_PAD_GPIO_19__GPIO4_IO05          0x1b0b0 /* SD2 card detect input */
 627                         MX6QDL_PAD_SD4_DAT2__GPIO2_IO10         0x1b0b0 /* SD2 write protect input */
 628                 >;
 629         };
 630 };