arch/arm/boot/dts/imx6qdl-tx6.dtsi

   1 /*
   2  * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License
  11  *     version 2 as published by the Free Software Foundation.
  12  *
  13  *     This file is distributed in the hope that it will be useful,
  14  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *     GNU General Public License for more details.
  17  *
  18  * Or, alternatively,
  19  *
  20  *  b) Permission is hereby granted, free of charge, to any person
  21  *     obtaining a copy of this software and associated documentation
  22  *     files (the "Software"), to deal in the Software without
  23  *     restriction, including without limitation the rights to use,
  24  *     copy, modify, merge, publish, distribute, sublicense, and/or
  25  *     sell copies of the Software, and to permit persons to whom the
  26  *     Software is furnished to do so, subject to the following
  27  *     conditions:
  28  *
  29  *     The above copyright notice and this permission notice shall be
  30  *     included in all copies or substantial portions of the Software.
  31  *
  32  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  33  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  34  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  35  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  36  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  37  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  39  *     OTHER DEALINGS IN THE SOFTWARE.
  40  */
  41
  42 #include <dt-bindings/gpio/gpio.h>
  43 #include <dt-bindings/input/input.h>
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45 #include <dt-bindings/pwm/pwm.h>
  46
  47 / {
  48         aliases {
  49                 can0 = &can2;
  50                 can1 = &can1;
  51                 ethernet0 = &fec;
  52                 lcdif_23bit_pins_a = &pinctrl_disp0_1;
  53                 lcdif_24bit_pins_a = &pinctrl_disp0_2;
  54                 pwm0 = &pwm1;
  55                 pwm1 = &pwm2;
  56                 reg_can_xcvr = &reg_can_xcvr;
  57                 stk5led = &user_led;
  58                 usbotg = &usbotg;
  59                 sdhc0 = &usdhc1;
  60                 sdhc1 = &usdhc2;
  61         };
  62
  63         memory {
  64                 reg = <0 0>; /* will be filled by U-Boot */
  65         };
  66
  67         clocks {
  68                 #address-cells = <1>;
  69                 #size-cells = <0>;
  70
  71                 mclk: clock@0 {
  72                         compatible = "fixed-clock";
  73                         reg = <0>;
  74                         #clock-cells = <0>;
  75                         clock-frequency = <26000000>;
  76                 };
  77         };
  78
  79         gpio-keys {
  80                 compatible = "gpio-keys";
  81
  82                 power {
  83                         label = "Power Button";
  84                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
  85                         linux,code = <KEY_POWER>;
  86                         wakeup-source;
  87                 };
  88         };
  89
  90         leds {
  91                 compatible = "gpio-leds";
  92
  93                 user_led: user {
  94                         label = "Heartbeat";
  95                         pinctrl-names = "default";
  96                         pinctrl-0 = <&pinctrl_user_led>;
  97                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
  98                         linux,default-trigger = "heartbeat";
  99                 };
 100         };
 101
 102         reg_3v3_etn: regulator-3v3-etn {
 103                 compatible = "regulator-fixed";
 104                 regulator-name = "3V3_ETN";
 105                 regulator-min-microvolt = <3300000>;
 106                 regulator-max-microvolt = <3300000>;
 107                 pinctrl-names = "default";
 108                 pinctrl-0 = <&pinctrl_etnphy_power>;
 109                 gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 110                 enable-active-high;
 111         };
 112
 113         reg_2v5: regulator-2v5 {
 114                 compatible = "regulator-fixed";
 115                 regulator-name = "2V5";
 116                 regulator-min-microvolt = <2500000>;
 117                 regulator-max-microvolt = <2500000>;
 118                 regulator-always-on;
 119         };
 120
 121         reg_3v3: regulator-3v3 {
 122                 compatible = "regulator-fixed";
 123                 regulator-name = "3V3";
 124                 regulator-min-microvolt = <3300000>;
 125                 regulator-max-microvolt = <3300000>;
 126                 regulator-always-on;
 127         };
 128
 129         reg_can_xcvr: regulator-can-xcvr {
 130                 compatible = "regulator-fixed";
 131                 regulator-name = "CAN XCVR";
 132                 regulator-min-microvolt = <3300000>;
 133                 regulator-max-microvolt = <3300000>;
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&pinctrl_flexcan_xcvr>;
 136                 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 137                 enable-active-low;
 138         };
 139
 140         reg_lcd0_pwr: regulator-lcd0-pwr {
 141                 compatible = "regulator-fixed";
 142                 regulator-name = "LCD0 POWER";
 143                 regulator-min-microvolt = <3300000>;
 144                 regulator-max-microvolt = <3300000>;
 145                 pinctrl-names = "default";
 146                 pinctrl-0 = <&pinctrl_lcd0_pwr>;
 147                 gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 148                 enable-active-high;
 149                 regulator-boot-on;
 150         };
 151
 152         reg_lcd1_pwr: regulator-lcd1-pwr {
 153                 compatible = "regulator-fixed";
 154                 regulator-name = "LCD1 POWER";
 155                 regulator-min-microvolt = <3300000>;
 156                 regulator-max-microvolt = <3300000>;
 157                 pinctrl-names = "default";
 158                 pinctrl-0 = <&pinctrl_lcd1_pwr>;
 159                 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
 160                 enable-active-high;
 161                 regulator-boot-on;
 162         };
 163
 164         reg_usbh1_vbus: regulator-usbh1-vbus {
 165                 compatible = "regulator-fixed";
 166                 regulator-name = "usbh1_vbus";
 167                 regulator-min-microvolt = <5000000>;
 168                 regulator-max-microvolt = <5000000>;
 169                 pinctrl-names = "default";
 170                 pinctrl-0 = <&pinctrl_usbh1_vbus>;
 171                 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
 172                 enable-active-high;
 173         };
 174
 175         reg_usbotg_vbus: regulator-usbotg-vbus {
 176                 compatible = "regulator-fixed";
 177                 regulator-name = "usbotg_vbus";
 178                 regulator-min-microvolt = <5000000>;
 179                 regulator-max-microvolt = <5000000>;
 180                 pinctrl-names = "default";
 181                 pinctrl-0 = <&pinctrl_usbotg_vbus>;
 182                 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         sound {
 187                 compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
 188                              "fsl,imx-audio-sgtl5000";
 189                 model = "sgtl5000-audio";
 190                 pinctrl-names = "default";
 191                 pinctrl-0 = <&pinctrl_audmux>;
 192                 ssi-controller = <&ssi1>;
 193                 audio-codec = <&sgtl5000>;
 194                 audio-routing =
 195                         "MIC_IN", "Mic Jack",
 196                         "Mic Jack", "Mic Bias",
 197                         "Headphone Jack", "HP_OUT";
 198                 mux-int-port = <1>;
 199                 mux-ext-port = <5>;
 200         };
 201 };
 202
 203 &audmux {
 204         status = "okay";
 205 };
 206
 207 &can1 {
 208         pinctrl-names = "default";
 209         pinctrl-0 = <&pinctrl_flexcan1>;
 210         xceiver-supply = <&reg_can_xcvr>;
 211         status = "okay";
 212 };
 213
 214 &can2 {
 215         pinctrl-names = "default";
 216         pinctrl-0 = <&pinctrl_flexcan2>;
 217         xceiver-supply = <&reg_can_xcvr>;
 218         status = "okay";
 219 };
 220
 221 &ecspi1 {
 222         pinctrl-names = "default";
 223         pinctrl-0 = <&pinctrl_ecspi1>;
 224         cs-gpios = <
 225                 &gpio2 30 GPIO_ACTIVE_HIGH
 226                 &gpio3 19 GPIO_ACTIVE_HIGH
 227         >;
 228         status = "disabled";
 229
 230         spidev0: spi@0 {
 231                 compatible = "spidev";
 232                 reg = <0>;
 233                 spi-max-frequency = <54000000>;
 234         };
 235
 236         spidev1: spi@1 {
 237                 compatible = "spidev";
 238                 reg = <1>;
 239                 spi-max-frequency = <54000000>;
 240         };
 241 };
 242
 243 &fec {
 244         pinctrl-names = "default";
 245         pinctrl-0 = <&pinctrl_enet>;
 246         clocks = <&clks IMX6QDL_CLK_ENET>,
 247                  <&clks IMX6QDL_CLK_ENET>,
 248                  <&clks IMX6QDL_CLK_ENET_REF>,
 249                  <&clks IMX6QDL_CLK_ENET_REF>;
 250         clock-names = "ipg", "ahb", "ptp", "enet_out";
 251         phy-mode = "rmii";
 252         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
 253         phy-handle = <&etnphy>;
 254         phy-supply = <&reg_3v3_etn>;
 255         status = "okay";
 256
 257         mdio {
 258                 #address-cells = <1>;
 259                 #size-cells = <0>;
 260
 261                 etnphy: ethernet-phy@0 {
 262                         compatible = "ethernet-phy-ieee802.3-c22";
 263                         reg = <0>;
 264                         pinctrl-names = "default";
 265                         pinctrl-0 = <&pinctrl_enet_mdio>;
 266                         interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>;
 267                 };
 268         };
 269 };
 270
 271 &gpmi {
 272         pinctrl-names = "default";
 273         pinctrl-0 = <&pinctrl_gpmi_nand>;
 274         nand-on-flash-bbt;
 275         fsl,no-blockmark-swap;
 276         status = "okay";
 277 };
 278
 279 &i2c1 {
 280         pinctrl-names = "default";
 281         pinctrl-0 = <&pinctrl_i2c1>;
 282         clock-frequency = <400000>;
 283         status = "okay";
 284
 285         ds1339: rtc@68 {
 286                 compatible = "dallas,ds1339";
 287                 reg = <0x68>;
 288         };
 289 };
 290
 291 &i2c3 {
 292         pinctrl-names = "default";
 293         pinctrl-0 = <&pinctrl_i2c3>;
 294         clock-frequency = <400000>;
 295         status = "okay";
 296
 297         sgtl5000: sgtl5000@0a {
 298                 compatible = "fsl,sgtl5000";
 299                 reg = <0x0a>;
 300                 VDDA-supply = <&reg_2v5>;
 301                 VDDIO-supply = <&reg_3v3>;
 302                 clocks = <&mclk>;
 303         };
 304
 305         polytouch: edt-ft5x06@38 {
 306                 compatible = "edt,edt-ft5x06";
 307                 reg = <0x38>;
 308                 pinctrl-names = "default";
 309                 pinctrl-0 = <&pinctrl_edt_ft5x06>;
 310                 interrupt-parent = <&gpio6>;
 311                 interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 312                 reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 313                 wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 314                 wakeup-source;
 315         };
 316
 317         touchscreen: tsc2007@48 {
 318                 compatible = "ti,tsc2007";
 319                 reg = <0x48>;
 320                 pinctrl-names = "default";
 321                 pinctrl-0 = <&pinctrl_tsc2007>;
 322                 interrupt-parent = <&gpio3>;
 323                 interrupts = <26 0>;
 324                 gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 325                 ti,x-plate-ohms = <660>;
 326                 wakeup-source;
 327         };
 328 };
 329
 330 &iomuxc {
 331         pinctrl-names = "default";
 332         pinctrl-0 = <&pinctrl_hog>;
 333
 334         pinctrl_hog: hoggrp {
 335                 fsl,pins = <
 336                         MX6QDL_PAD_SD3_DAT2__GPIO7_IO06         0x1b0b1 /* ETN PHY RESET */
 337                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b0b1 /* ETN PHY INT */
 338                         MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b1 /* PWR BTN */
 339                 >;
 340         };
 341
 342         pinctrl_audmux: audmuxgrp {
 343                 fsl,pins = <
 344                         MX6QDL_PAD_KEY_ROW1__AUD5_RXD           0x130b0 /* SSI1_RXD */
 345                         MX6QDL_PAD_KEY_ROW0__AUD5_TXD           0x110b0 /* SSI1_TXD */
 346                         MX6QDL_PAD_KEY_COL0__AUD5_TXC           0x130b0 /* SSI1_CLK */
 347                         MX6QDL_PAD_KEY_COL1__AUD5_TXFS          0x130b0 /* SSI1_FS */
 348                 >;
 349         };
 350
 351         pinctrl_disp0_1: disp0grp-1 {
 352                 fsl,pins = <
 353                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 354                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 355                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 356                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 357                         /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
 358                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 359                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 360                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 361                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 362                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 363                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 364                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 365                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 366                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 367                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 368                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 369                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 370                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 371                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 372                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 373                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 374                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 375                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 376                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 377                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 378                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 379                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 380                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 381                 >;
 382         };
 383
 384         pinctrl_disp0_2: disp0grp-2 {
 385                 fsl,pins = <
 386                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 387                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
 388                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
 389                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
 390                         MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
 391                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
 392                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
 393                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
 394                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
 395                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
 396                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
 397                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
 398                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
 399                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
 400                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
 401                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
 402                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
 403                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
 404                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
 405                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
 406                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
 407                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
 408                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
 409                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
 410                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
 411                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
 412                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
 413                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
 414                 >;
 415         };
 416
 417         pinctrl_ecspi1: ecspi1grp {
 418                 fsl,pins = <
 419                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x0b0b0
 420                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x0b0b0
 421                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x0b0b0
 422                         MX6QDL_PAD_GPIO_19__ECSPI1_RDY          0x0b0b0
 423                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x0b0b0 /* SPI CS0 */
 424                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x0b0b0 /* SPI CS1 */
 425                 >;
 426         };
 427
 428         pinctrl_edt_ft5x06: edt-ft5x06grp {
 429                 fsl,pins = <
 430                         MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x1b0b0 /* Interrupt */
 431                         MX6QDL_PAD_EIM_A16__GPIO2_IO22          0x1b0b0 /* Reset */
 432                         MX6QDL_PAD_EIM_A17__GPIO2_IO21          0x1b0b0 /* Wake */
 433                 >;
 434         };
 435
 436         pinctrl_enet: enetgrp {
 437                 fsl,pins = <
 438                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
 439                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
 440                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
 441                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 442                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
 443                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
 444                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
 445                 >;
 446         };
 447
 448         pinctrl_enet_mdio: enet-mdiogrp {
 449                 fsl,pins = <
 450                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 451                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 452                 >;
 453         };
 454
 455         pinctrl_etnphy_power: etnphy-pwrgrp {
 456                 fsl,pins = <
 457                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b1 /* ETN PHY POWER */
 458                 >;
 459         };
 460
 461         pinctrl_flexcan1: flexcan1grp {
 462                 fsl,pins = <
 463                         MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x1b0b0
 464                         MX6QDL_PAD_GPIO_8__FLEXCAN1_RX          0x1b0b0
 465                 >;
 466         };
 467
 468         pinctrl_flexcan2: flexcan2grp {
 469                 fsl,pins = <
 470                         MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
 471                         MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
 472                 >;
 473         };
 474
 475         pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
 476                 fsl,pins = <
 477                         MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21       0x1b0b0 /* Flexcan XCVR enable */
 478                 >;
 479         };
 480
 481         pinctrl_gpmi_nand: gpminandgrp {
 482                 fsl,pins = <
 483                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0x0b0b1
 484                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0x0b0b1
 485                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0x0b0b1
 486                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0x0b000
 487                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0x0b0b1
 488                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0x0b0b1
 489                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0x0b0b1
 490                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0x0b0b1
 491                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0x0b0b1
 492                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0x0b0b1
 493                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0x0b0b1
 494                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0x0b0b1
 495                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0x0b0b1
 496                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0x0b0b1
 497                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0x0b0b1
 498                 >;
 499         };
 500
 501         pinctrl_i2c1: i2c1grp {
 502                 fsl,pins = <
 503                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 504                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 505                 >;
 506         };
 507
 508         pinctrl_i2c3: i2c3grp {
 509                 fsl,pins = <
 510                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 511                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 512                 >;
 513         };
 514
 515         pinctrl_kpp: kppgrp {
 516                 fsl,pins = <
 517                         MX6QDL_PAD_GPIO_9__KEY_COL6             0x1b0b1
 518                         MX6QDL_PAD_GPIO_4__KEY_COL7             0x1b0b1
 519                         MX6QDL_PAD_KEY_COL2__KEY_COL2           0x1b0b1
 520                         MX6QDL_PAD_KEY_COL3__KEY_COL3           0x1b0b1
 521                         MX6QDL_PAD_GPIO_2__KEY_ROW6             0x1b0b1
 522                         MX6QDL_PAD_GPIO_5__KEY_ROW7             0x1b0b1
 523                         MX6QDL_PAD_KEY_ROW2__KEY_ROW2           0x1b0b1
 524                         MX6QDL_PAD_KEY_ROW3__KEY_ROW3           0x1b0b1
 525                 >;
 526         };
 527
 528         pinctrl_lcd0_pwr: lcd0-pwrgrp {
 529                 fsl,pins = <
 530                         MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x1b0b1 /* LCD Reset */
 531                 >;
 532         };
 533
 534         pinctrl_lcd1_pwr: lcd-pwrgrp {
 535                 fsl,pins = <
 536                         MX6QDL_PAD_EIM_EB3__GPIO2_IO31          0x1b0b1 /* LCD Power Enable */
 537                 >;
 538         };
 539
 540         pinctrl_pwm1: pwm1grp {
 541                 fsl,pins = <
 542                         MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b1
 543                 >;
 544         };
 545
 546         pinctrl_pwm2: pwm2grp {
 547                 fsl,pins = <
 548                         MX6QDL_PAD_GPIO_1__PWM2_OUT             0x1b0b1
 549                 >;
 550         };
 551
 552         pinctrl_tsc2007: tsc2007grp {
 553                 fsl,pins = <
 554                         MX6QDL_PAD_EIM_D26__GPIO3_IO26          0x1b0b0 /* Interrupt */
 555                 >;
 556         };
 557
 558         pinctrl_uart1: uart1grp {
 559                 fsl,pins = <
 560                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 561                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 562                 >;
 563         };
 564
 565         pinctrl_uart1_rtscts: uart1_rtsctsgrp {
 566                 fsl,pins = <
 567                         MX6QDL_PAD_SD3_DAT1__UART1_RTS_B        0x1b0b1
 568                         MX6QDL_PAD_SD3_DAT0__UART1_CTS_B        0x1b0b1
 569                 >;
 570         };
 571
 572         pinctrl_uart2: uart2grp {
 573                 fsl,pins = <
 574                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 575                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 576                 >;
 577         };
 578
 579         pinctrl_uart2_rtscts: uart2_rtsctsgrp {
 580                 fsl,pins = <
 581                         MX6QDL_PAD_SD4_DAT5__UART2_RTS_B        0x1b0b1
 582                         MX6QDL_PAD_SD4_DAT6__UART2_CTS_B        0x1b0b1
 583                 >;
 584         };
 585
 586         pinctrl_uart3: uart3grp {
 587                 fsl,pins = <
 588                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 589                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 590                 >;
 591         };
 592
 593         pinctrl_uart3_rtscts: uart3_rtsctsgrp {
 594                 fsl,pins = <
 595                         MX6QDL_PAD_SD3_DAT3__UART3_CTS_B        0x1b0b1
 596                         MX6QDL_PAD_SD3_RST__UART3_RTS_B         0x1b0b1
 597                 >;
 598         };
 599
 600         pinctrl_usbh1_vbus: usbh1-vbusgrp {
 601                 fsl,pins = <
 602                         MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x1b0b0 /* USBH1_VBUSEN */
 603                 >;
 604         };
 605
 606         pinctrl_usbotg: usbotggrp {
 607                 fsl,pins = <
 608                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x17059
 609                 >;
 610         };
 611
 612         pinctrl_usbotg_vbus: usbotg-vbusgrp {
 613                 fsl,pins = <
 614                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x1b0b0 /* USBOTG_VBUSEN */
 615                 >;
 616         };
 617
 618         pinctrl_usdhc1: usdhc1grp {
 619                 fsl,pins = <
 620                         MX6QDL_PAD_SD1_CMD__SD1_CMD             0x070b1
 621                         MX6QDL_PAD_SD1_CLK__SD1_CLK             0x070b1
 622                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x070b1
 623                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x070b1
 624                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x070b1
 625                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x070b1
 626                         MX6QDL_PAD_SD3_CMD__GPIO7_IO02          0x170b0 /* SD1 CD */
 627                 >;
 628         };
 629
 630         pinctrl_usdhc2: usdhc2grp {
 631                 fsl,pins = <
 632                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x070b1
 633                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x070b1
 634                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x070b1
 635                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x070b1
 636                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x070b1
 637                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x070b1
 638                         MX6QDL_PAD_SD3_CLK__GPIO7_IO03          0x170b0 /* SD2 CD */
 639                 >;
 640         };
 641
 642         pinctrl_user_led: user-ledgrp {
 643                 fsl,pins = <
 644                         MX6QDL_PAD_EIM_A18__GPIO2_IO20          0x1b0b1 /* LED */
 645                 >;
 646         };
 647 };
 648
 649 &kpp {
 650         pinctrl-names = "default";
 651         pinctrl-0 = <&pinctrl_kpp>;
 652         /* sample keymap */
 653         /* row/col 0,1 are mapped to KPP row/col 6,7 */
 654         linux,keymap = <
 655                 MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
 656                 MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
 657                 MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
 658                 MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
 659                 MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
 660                 MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
 661                 MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
 662                 MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
 663                 MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
 664                 MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
 665                 MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
 666         >;
 667         status = "okay";
 668 };
 669
 670 &pwm1 {
 671         pinctrl-names = "default";
 672         pinctrl-0 = <&pinctrl_pwm1>;
 673         #pwm-cells = <3>;
 674         status = "disabled";
 675 };
 676
 677 &pwm2 {
 678         pinctrl-names = "default";
 679         pinctrl-0 = <&pinctrl_pwm2>;
 680         #pwm-cells = <3>;
 681         status = "okay";
 682 };
 683
 684 &ssi1 {
 685         status = "okay";
 686 };
 687
 688 &uart1 {
 689         pinctrl-names = "default";
 690         pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
 691         uart-has-rtscts;
 692         status = "okay";
 693 };
 694
 695 &uart2 {
 696         pinctrl-names = "default";
 697         pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
 698         uart-has-rtscts;
 699         status = "okay";
 700 };
 701
 702 &uart3 {
 703         pinctrl-names = "default";
 704         pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
 705         uart-has-rtscts;
 706         status = "okay";
 707 };
 708
 709 &usbh1 {
 710         vbus-supply = <&reg_usbh1_vbus>;
 711         dr_mode = "host";
 712         disable-over-current;
 713         status = "okay";
 714 };
 715
 716 &usbotg {
 717         vbus-supply = <&reg_usbotg_vbus>;
 718         pinctrl-names = "default";
 719         pinctrl-0 = <&pinctrl_usbotg>;
 720         dr_mode = "peripheral";
 721         disable-over-current;
 722         status = "okay";
 723 };
 724
 725 &usdhc1 {
 726         pinctrl-names = "default";
 727         pinctrl-0 = <&pinctrl_usdhc1>;
 728         bus-width = <4>;
 729         no-1-8-v;
 730         cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 731         fsl,wp-controller;
 732         status = "okay";
 733 };
 734
 735 &usdhc2 {
 736         pinctrl-names = "default";
 737         pinctrl-0 = <&pinctrl_usdhc2>;
 738         bus-width = <4>;
 739         no-1-8-v;
 740         cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 741         fsl,wp-controller;
 742         status = "okay";
 743 };