arch/arm/boot/dts/kirkwood-goflexnet.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "Seagate GoFlex Net";
   8         compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x8000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
  17                 stdout-path = &uart0;
  18         };
  19
  20         ocp@f1000000 {
  21                 pinctrl: pin-controller@10000 {
  22                         pmx_usb_power_enable: pmx-usb-power-enable {
  23                                 marvell,pins = "mpp29";
  24                                 marvell,function = "gpio";
  25                         };
  26                         pmx_led_right_cap_0: pmx-led_right_cap_0 {
  27                                 marvell,pins = "mpp38";
  28                                 marvell,function = "gpio";
  29                         };
  30                         pmx_led_right_cap_1: pmx-led_right_cap_1 {
  31                                 marvell,pins = "mpp39";
  32                                 marvell,function = "gpio";
  33                         };
  34                         pmx_led_right_cap_2: pmx-led_right_cap_2 {
  35                                 marvell,pins = "mpp40";
  36                                 marvell,function = "gpio";
  37                         };
  38                         pmx_led_right_cap_3: pmx-led_right_cap_3 {
  39                                 marvell,pins = "mpp41";
  40                                 marvell,function = "gpio";
  41                         };
  42                         pmx_led_left_cap_0: pmx-led_left_cap_0 {
  43                                 marvell,pins = "mpp42";
  44                                 marvell,function = "gpio";
  45                         };
  46                         pmx_led_left_cap_1: pmx-led_left_cap_1 {
  47                                 marvell,pins = "mpp43";
  48                                 marvell,function = "gpio";
  49                         };
  50                         pmx_led_left_cap_2: pmx-led_left_cap_2 {
  51                                 marvell,pins = "mpp44";
  52                                 marvell,function = "gpio";
  53                         };
  54                         pmx_led_left_cap_3: pmx-led_left_cap_3 {
  55                                 marvell,pins = "mpp45";
  56                                 marvell,function = "gpio";
  57                         };
  58                         pmx_led_green: pmx-led_green {
  59                                 marvell,pins = "mpp46";
  60                                 marvell,function = "gpio";
  61                         };
  62                         pmx_led_orange: pmx-led_orange {
  63                                 marvell,pins = "mpp47";
  64                                 marvell,function = "gpio";
  65                         };
  66                 };
  67                 serial@12000 {
  68                         status = "ok";
  69                 };
  70
  71                 sata@80000 {
  72                         status = "okay";
  73                         nr-ports = <2>;
  74                 };
  75
  76         };
  77         gpio-leds {
  78                 compatible = "gpio-leds";
  79                 pinctrl-0 = < &pmx_led_orange
  80                               &pmx_led_left_cap_0 &pmx_led_left_cap_1
  81                               &pmx_led_left_cap_2 &pmx_led_left_cap_3
  82                               &pmx_led_right_cap_0 &pmx_led_right_cap_1
  83                               &pmx_led_right_cap_2 &pmx_led_right_cap_3
  84                             >;
  85                 pinctrl-names = "default";
  86
  87                 health {
  88                         label = "status:green:health";
  89                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  90                         default-state = "keep";
  91                 };
  92                 fault {
  93                         label = "status:orange:fault";
  94                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  95                 };
  96                 left0 {
  97                         label = "status:white:left0";
  98                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
  99                 };
 100                 left1 {
 101                         label = "status:white:left1";
 102                         gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 103                 };
 104                 left2 {
 105                         label = "status:white:left2";
 106                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 107                 };
 108                 left3 {
 109                         label = "status:white:left3";
 110                         gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 111                 };
 112                 right0 {
 113                         label = "status:white:right0";
 114                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 115                 };
 116                 right1 {
 117                         label = "status:white:right1";
 118                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 119                 };
 120                 right2 {
 121                         label = "status:white:right2";
 122                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 123                 };
 124                 right3 {
 125                         label = "status:white:right3";
 126                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 127                 };
 128         };
 129         regulators {
 130                 compatible = "simple-bus";
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133                 pinctrl-0 = <&pmx_usb_power_enable>;
 134                 pinctrl-names = "default";
 135
 136                 usb_power: regulator@1 {
 137                         compatible = "regulator-fixed";
 138                         reg = <1>;
 139                         regulator-name = "USB Power";
 140                         regulator-min-microvolt = <5000000>;
 141                         regulator-max-microvolt = <5000000>;
 142                         enable-active-high;
 143                         regulator-always-on;
 144                         regulator-boot-on;
 145                         gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 146                 };
 147         };
 148 };
 149
 150 &nand {
 151         chip-delay = <40>;
 152         status = "okay";
 153
 154         partition@0 {
 155                 label = "u-boot";
 156                 reg = <0x0000000 0x100000>;
 157                 read-only;
 158         };
 159
 160         partition@100000 {
 161                 label = "uImage";
 162                 reg = <0x0100000 0x400000>;
 163         };
 164
 165         partition@500000 {
 166                 label = "pogoplug";
 167                 reg = <0x0500000 0x2000000>;
 168         };
 169
 170         partition@2500000 {
 171                 label = "root";
 172                 reg = <0x02500000 0xd800000>;
 173         };
 174 };
 175
 176 &mdio {
 177         status = "okay";
 178
 179         ethphy0: ethernet-phy@0 {
 180                 reg = <0>;
 181         };
 182 };
 183
 184 &eth0 {
 185         status = "okay";
 186         ethernet0-port@0 {
 187                 phy-handle = <&ethphy0>;
 188         };
 189 };