arch/arm/boot/dts/kirkwood-nsa310a.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood-nsa3x0-common.dtsi"
   4
   5 /*
   6  * There are at least two different NSA310 designs. This variant does
   7  * not have the red USB Led.
   8  */
   9
  10 / {
  11         compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  12
  13         memory {
  14                 device_type = "memory";
  15                 reg = <0x00000000 0x10000000>;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20                 stdout-path = &uart0;
  21         };
  22
  23         ocp@f1000000 {
  24                 pinctrl: pin-controller@10000 {
  25                         pinctrl-names = "default";
  26
  27                         pmx_led_esata_green: pmx-led-esata-green {
  28                                 marvell,pins = "mpp12";
  29                                 marvell,function = "gpio";
  30                         };
  31
  32                         pmx_led_esata_red: pmx-led-esata-red {
  33                                 marvell,pins = "mpp13";
  34                                 marvell,function = "gpio";
  35                         };
  36
  37                         pmx_led_usb_green: pmx-led-usb-green {
  38                                 marvell,pins = "mpp15";
  39                                 marvell,function = "gpio";
  40                         };
  41
  42                         pmx_led_sys_green: pmx-led-sys-green {
  43                                 marvell,pins = "mpp28";
  44                                 marvell,function = "gpio";
  45                         };
  46
  47                         pmx_led_sys_red: pmx-led-sys-red {
  48                                 marvell,pins = "mpp29";
  49                                 marvell,function = "gpio";
  50                         };
  51
  52                         pmx_led_hdd_green: pmx-led-hdd-green {
  53                                 marvell,pins = "mpp41";
  54                                 marvell,function = "gpio";
  55                         };
  56
  57                         pmx_led_hdd_red: pmx-led-hdd-red {
  58                                 marvell,pins = "mpp42";
  59                                 marvell,function = "gpio";
  60                         };
  61
  62                 };
  63
  64                 i2c@11000 {
  65                         status = "okay";
  66
  67                         lm85: lm85@2e {
  68                                 compatible = "national,lm85";
  69                                 reg = <0x2e>;
  70                         };
  71                 };
  72         };
  73
  74         gpio-leds {
  75                 compatible = "gpio-leds";
  76
  77                 green-sys {
  78                         label = "nsa310:green:sys";
  79                         gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
  80                 };
  81                 red-sys {
  82                         label = "nsa310:red:sys";
  83                         gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
  84                 };
  85                 green-hdd {
  86                         label = "nsa310:green:hdd";
  87                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  88                 };
  89                 red-hdd {
  90                         label = "nsa310:red:hdd";
  91                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
  92                 };
  93                 green-esata {
  94                         label = "nsa310:green:esata";
  95                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  96                 };
  97                 red-esata {
  98                         label = "nsa310:red:esata";
  99                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 100                 };
 101                 green-usb {
 102                         label = "nsa310:green:usb";
 103                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 104                 };
 105                 green-copy {
 106                         label = "nsa310:green:copy";
 107                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 108                 };
 109                 red-copy {
 110                         label = "nsa310:red:copy";
 111                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 112                 };
 113         };
 114 };