arch/arm/boot/dts/kirkwood-ts219.dtsi

   1 / {
   2         model = "QNAP TS219 family";
   3         compatible = "qnap,ts219", "marvell,kirkwood";
   4
   5         memory {
   6                 device_type = "memory";
   7                 reg = <0x00000000 0x20000000>;
   8         };
   9
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12                 stdout-path = &uart0;
  13         };
  14
  15         ocp@f1000000 {
  16                 i2c@11000 {
  17                         status = "okay";
  18                         clock-frequency = <400000>;
  19
  20                         s35390a: s35390a@30 {
  21                                 compatible = "s35390a";
  22                                 reg = <0x30>;
  23                         };
  24                 };
  25                 serial@12000 {
  26                         status = "okay";
  27                 };
  28                 serial@12100 {
  29                         status = "okay";
  30                 };
  31                 poweroff@12100 {
  32                         compatible = "qnap,power-off";
  33                         reg = <0x12100 0x100>;
  34                         clocks = <&gate_clk 7>;
  35                 };
  36                 spi@10600 {
  37                         status = "okay";
  38
  39                         m25p128@0 {
  40                                 #address-cells = <1>;
  41                                 #size-cells = <1>;
  42                                 compatible = "m25p128", "jedec,spi-nor";
  43                                 reg = <0>;
  44                                 spi-max-frequency = <20000000>;
  45                                 mode = <0>;
  46
  47                                 partition@0000000 {
  48                                         reg = <0x00000000 0x00080000>;
  49                                         label = "U-Boot";
  50                                 };
  51
  52                                 partition@00200000 {
  53                                         reg = <0x00200000 0x00200000>;
  54                                         label = "Kernel";
  55                                 };
  56
  57                                 partition@00400000 {
  58                                         reg = <0x00400000 0x00900000>;
  59                                         label = "RootFS1";
  60                                 };
  61                                 partition@00d00000 {
  62                                         reg = <0x00d00000 0x00300000>;
  63                                         label = "RootFS2";
  64                                 };
  65                                 partition@00040000 {
  66                                         reg = <0x00080000 0x00040000>;
  67                                         label = "U-Boot Config";
  68                                 };
  69                                 partition@000c0000 {
  70                                         reg = <0x000c0000 0x00140000>;
  71                                         label = "NAS Config";
  72                                 };
  73                         };
  74                 };
  75                 sata@80000 {
  76                         pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
  77                         pinctrl-names = "default";
  78                         status = "okay";
  79                         nr-ports = <2>;
  80                 };
  81         };
  82 };
  83
  84 &mdio {
  85         status = "okay";
  86
  87         ethphy0: ethernet-phy@X {
  88                 /* overwrite reg property in board file */
  89         };
  90 };
  91
  92 &eth0 {
  93         status = "okay";
  94         ethernet0-port@0 {
  95                 phy-handle = <&ethphy0>;
  96         };
  97 };
  98
  99 &pciec {
 100         status = "okay";
 101 };
 102
 103 &pcie0 {
 104         status = "okay";
 105 };