x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / arm / boot / dts / omap2430.dtsi
blob84635eeb99cd46ae4d7240dfffbe551cb20a6af8
1 /*
2  * Device Tree Source for OMAP243x SoC
3  *
4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
11 #include "omap2.dtsi"
13 / {
14         compatible = "ti,omap2430", "ti,omap2";
16         ocp {
17                 l4_wkup: l4_wkup@49000000 {
18                         compatible = "ti,omap2-l4-wkup", "simple-bus";
19                         #address-cells = <1>;
20                         #size-cells = <1>;
21                         ranges = <0 0x49000000 0x31000>;
23                         prcm: prcm@6000 {
24                                 compatible = "ti,omap2-prcm";
25                                 reg = <0x6000 0x1000>;
27                                 prcm_clocks: clocks {
28                                         #address-cells = <1>;
29                                         #size-cells = <0>;
30                                 };
32                                 prcm_clockdomains: clockdomains {
33                                 };
34                         };
36                         scm: scm@2000 {
37                                 compatible = "ti,omap2-scm", "simple-bus";
38                                 reg = <0x2000 0x1000>;
39                                 #address-cells = <1>;
40                                 #size-cells = <1>;
41                                 #pinctrl-cells = <1>;
42                                 ranges = <0 0x2000 0x1000>;
44                                 omap2430_pmx: pinmux@30 {
45                                         compatible = "ti,omap2430-padconf",
46                                                      "pinctrl-single";
47                                         reg = <0x30 0x0154>;
48                                         #address-cells = <1>;
49                                         #size-cells = <0>;
50                                         #pinctrl-cells = <1>;
51                                         pinctrl-single,register-width = <8>;
52                                         pinctrl-single,function-mask = <0x3f>;
53                                 };
55                                 scm_conf: scm_conf@270 {
56                                         compatible = "syscon",
57                                                      "simple-bus";
58                                         reg = <0x270 0x240>;
59                                         #address-cells = <1>;
60                                         #size-cells = <1>;
61                                         ranges = <0 0x270 0x240>;
63                                         scm_clocks: clocks {
64                                                 #address-cells = <1>;
65                                                 #size-cells = <0>;
66                                         };
68                                         pbias_regulator: pbias_regulator@230 {
69                                                 compatible = "ti,pbias-omap2", "ti,pbias-omap";
70                                                 reg = <0x230 0x4>;
71                                                 syscon = <&scm_conf>;
72                                                 pbias_mmc_reg: pbias_mmc_omap2430 {
73                                                         regulator-name = "pbias_mmc_omap2430";
74                                                         regulator-min-microvolt = <1800000>;
75                                                         regulator-max-microvolt = <3000000>;
76                                                 };
77                                         };
78                                 };
80                                 scm_clockdomains: clockdomains {
81                                 };
82                         };
84                         counter32k: counter@20000 {
85                                 compatible = "ti,omap-counter32k";
86                                 reg = <0x20000 0x20>;
87                                 ti,hwmods = "counter_32k";
88                         };
89                 };
91                 gpio1: gpio@4900c000 {
92                         compatible = "ti,omap2-gpio";
93                         reg = <0x4900c000 0x200>;
94                         interrupts = <29>;
95                         ti,hwmods = "gpio1";
96                         ti,gpio-always-on;
97                         #gpio-cells = <2>;
98                         gpio-controller;
99                         #interrupt-cells = <2>;
100                         interrupt-controller;
101                 };
103                 gpio2: gpio@4900e000 {
104                         compatible = "ti,omap2-gpio";
105                         reg = <0x4900e000 0x200>;
106                         interrupts = <30>;
107                         ti,hwmods = "gpio2";
108                         ti,gpio-always-on;
109                         #gpio-cells = <2>;
110                         gpio-controller;
111                         #interrupt-cells = <2>;
112                         interrupt-controller;
113                 };
115                 gpio3: gpio@49010000 {
116                         compatible = "ti,omap2-gpio";
117                         reg = <0x49010000 0x200>;
118                         interrupts = <31>;
119                         ti,hwmods = "gpio3";
120                         ti,gpio-always-on;
121                         #gpio-cells = <2>;
122                         gpio-controller;
123                         #interrupt-cells = <2>;
124                         interrupt-controller;
125                 };
127                 gpio4: gpio@49012000 {
128                         compatible = "ti,omap2-gpio";
129                         reg = <0x49012000 0x200>;
130                         interrupts = <32>;
131                         ti,hwmods = "gpio4";
132                         ti,gpio-always-on;
133                         #gpio-cells = <2>;
134                         gpio-controller;
135                         #interrupt-cells = <2>;
136                         interrupt-controller;
137                 };
139                 gpio5: gpio@480b6000 {
140                         compatible = "ti,omap2-gpio";
141                         reg = <0x480b6000 0x200>;
142                         interrupts = <33>;
143                         ti,hwmods = "gpio5";
144                         #gpio-cells = <2>;
145                         gpio-controller;
146                         #interrupt-cells = <2>;
147                         interrupt-controller;
148                 };
150                 gpmc: gpmc@6e000000 {
151                         compatible = "ti,omap2430-gpmc";
152                         reg = <0x6e000000 0x1000>;
153                         #address-cells = <2>;
154                         #size-cells = <1>;
155                         interrupts = <20>;
156                         gpmc,num-cs = <8>;
157                         gpmc,num-waitpins = <4>;
158                         ti,hwmods = "gpmc";
159                         interrupt-controller;
160                         #interrupt-cells = <2>;
161                         gpio-controller;
162                         #gpio-cells = <2>;
163                 };
165                 mcbsp1: mcbsp@48074000 {
166                         compatible = "ti,omap2430-mcbsp";
167                         reg = <0x48074000 0xff>;
168                         reg-names = "mpu";
169                         interrupts = <64>, /* OCP compliant interrupt */
170                                      <59>, /* TX interrupt */
171                                      <60>, /* RX interrupt */
172                                      <61>; /* RX overflow interrupt */
173                         interrupt-names = "common", "tx", "rx", "rx_overflow";
174                         ti,buffer-size = <128>;
175                         ti,hwmods = "mcbsp1";
176                         dmas = <&sdma 31>,
177                                <&sdma 32>;
178                         dma-names = "tx", "rx";
179                         status = "disabled";
180                 };
182                 mcbsp2: mcbsp@48076000 {
183                         compatible = "ti,omap2430-mcbsp";
184                         reg = <0x48076000 0xff>;
185                         reg-names = "mpu";
186                         interrupts = <16>, /* OCP compliant interrupt */
187                                      <62>, /* TX interrupt */
188                                      <63>; /* RX interrupt */
189                         interrupt-names = "common", "tx", "rx";
190                         ti,buffer-size = <128>;
191                         ti,hwmods = "mcbsp2";
192                         dmas = <&sdma 33>,
193                                <&sdma 34>;
194                         dma-names = "tx", "rx";
195                         status = "disabled";
196                 };
198                 mcbsp3: mcbsp@4808c000 {
199                         compatible = "ti,omap2430-mcbsp";
200                         reg = <0x4808c000 0xff>;
201                         reg-names = "mpu";
202                         interrupts = <17>, /* OCP compliant interrupt */
203                                      <89>, /* TX interrupt */
204                                      <90>; /* RX interrupt */
205                         interrupt-names = "common", "tx", "rx";
206                         ti,buffer-size = <128>;
207                         ti,hwmods = "mcbsp3";
208                         dmas = <&sdma 17>,
209                                <&sdma 18>;
210                         dma-names = "tx", "rx";
211                         status = "disabled";
212                 };
214                 mcbsp4: mcbsp@4808e000 {
215                         compatible = "ti,omap2430-mcbsp";
216                         reg = <0x4808e000 0xff>;
217                         reg-names = "mpu";
218                         interrupts = <18>, /* OCP compliant interrupt */
219                                      <54>, /* TX interrupt */
220                                      <55>; /* RX interrupt */
221                         interrupt-names = "common", "tx", "rx";
222                         ti,buffer-size = <128>;
223                         ti,hwmods = "mcbsp4";
224                         dmas = <&sdma 19>,
225                                <&sdma 20>;
226                         dma-names = "tx", "rx";
227                         status = "disabled";
228                 };
230                 mcbsp5: mcbsp@48096000 {
231                         compatible = "ti,omap2430-mcbsp";
232                         reg = <0x48096000 0xff>;
233                         reg-names = "mpu";
234                         interrupts = <19>, /* OCP compliant interrupt */
235                                      <81>, /* TX interrupt */
236                                      <82>; /* RX interrupt */
237                         interrupt-names = "common", "tx", "rx";
238                         ti,buffer-size = <128>;
239                         ti,hwmods = "mcbsp5";
240                         dmas = <&sdma 21>,
241                                <&sdma 22>;
242                         dma-names = "tx", "rx";
243                         status = "disabled";
244                 };
246                 mmc1: mmc@4809c000 {
247                         compatible = "ti,omap2-hsmmc";
248                         reg = <0x4809c000 0x200>;
249                         interrupts = <83>;
250                         ti,hwmods = "mmc1";
251                         ti,dual-volt;
252                         dmas = <&sdma 61>, <&sdma 62>;
253                         dma-names = "tx", "rx";
254                         pbias-supply = <&pbias_mmc_reg>;
255                 };
257                 mmc2: mmc@480b4000 {
258                         compatible = "ti,omap2-hsmmc";
259                         reg = <0x480b4000 0x200>;
260                         interrupts = <86>;
261                         ti,hwmods = "mmc2";
262                         dmas = <&sdma 47>, <&sdma 48>;
263                         dma-names = "tx", "rx";
264                 };
266                 mailbox: mailbox@48094000 {
267                         compatible = "ti,omap2-mailbox";
268                         reg = <0x48094000 0x200>;
269                         interrupts = <26>;
270                         ti,hwmods = "mailbox";
271                         #mbox-cells = <1>;
272                         ti,mbox-num-users = <4>;
273                         ti,mbox-num-fifos = <6>;
274                         mbox_dsp: dsp {
275                                 ti,mbox-tx = <0 0 0>;
276                                 ti,mbox-rx = <1 0 0>;
277                         };
278                 };
280                 timer1: timer@49018000 {
281                         compatible = "ti,omap2420-timer";
282                         reg = <0x49018000 0x400>;
283                         interrupts = <37>;
284                         ti,hwmods = "timer1";
285                         ti,timer-alwon;
286                 };
288                 mcspi3: mcspi@480b8000 {
289                         compatible = "ti,omap2-mcspi";
290                         ti,hwmods = "mcspi3";
291                         reg = <0x480b8000 0x100>;
292                         interrupts = <91>;
293                         dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
294                         dma-names = "tx0", "rx0", "tx1", "rx1";
295                 };
297                 usb_otg_hs: usb_otg_hs@480ac000 {
298                         compatible = "ti,omap2-musb";
299                         ti,hwmods = "usb_otg_hs";
300                         reg = <0x480ac000 0x1000>;
301                         interrupts = <93>;
302                 };
304                 wd_timer2: wdt@49016000 {
305                         compatible = "ti,omap2-wdt";
306                         ti,hwmods = "wd_timer2";
307                         reg = <0x49016000 0x80>;
308                 };
309         };
312 &i2c1 {
313         compatible = "ti,omap2430-i2c";
316 &i2c2 {
317         compatible = "ti,omap2430-i2c";
320 /include/ "omap24xx-clocks.dtsi"
321 /include/ "omap2430-clocks.dtsi"