arch/arm/boot/dts/omap3-cm-t3x30.dtsi

   1 /*
   2  * Common support for CompuLab CM-T3x30 CoMs
   3  */
   4
   5 #include "omap3-cm-t3x.dtsi"
   6
   7 / {
   8         cpus {
   9                 cpu@0 {
  10                         cpu0-supply = <&vcc>;
  11                 };
  12         };
  13
  14         sound {
  15                 compatible = "ti,omap-twl4030";
  16                 ti,model = "cm-t35";
  17
  18                 ti,mcbsp = <&mcbsp2>;
  19         };
  20 };
  21
  22 &omap3_pmx_core {
  23
  24         smsc1_pins: pinmux_smsc1_pins {
  25                 pinctrl-single,pins = <
  26                         OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs5.gpmc_ncs5 */
  27                         OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
  28                 >;
  29         };
  30
  31         hsusb0_pins: pinmux_hsusb0_pins {
  32                 pinctrl-single,pins = <
  33                         OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)               /* hsusb0_clk.hsusb0_clk */
  34                         OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)               /* hsusb0_stp.hsusb0_stp */
  35                         OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_dir.hsusb0_dir */
  36                         OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_nxt.hsusb0_nxt */
  37                         OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data0.hsusb2_data0 */
  38                         OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data1.hsusb0_data1 */
  39                         OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data2.hsusb0_data2 */
  40                         OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data3 */
  41                         OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data4 */
  42                         OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data5 */
  43                         OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data6 */
  44                         OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data7 */
  45                 >;
  46         };
  47 };
  48
  49 #include "omap-gpmc-smsc911x.dtsi"
  50
  51 &gpmc {
  52         ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
  53                  <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
  54
  55         smsc1: ethernet@gpmc {
  56                 compatible = "smsc,lan9221", "smsc,lan9115";
  57                 pinctrl-names = "default";
  58                 pinctrl-0 = <&smsc1_pins>;
  59                 interrupt-parent = <&gpio6>;
  60                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  61                 reg = <5 0 0xff>;
  62         };
  63 };
  64
  65 &i2c1 {
  66         twl: twl@48 {
  67                 reg = <0x48>;
  68                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
  69                 interrupt-parent = <&intc>;
  70
  71                 twl_audio: audio {
  72                         compatible = "ti,twl4030-audio";
  73                         codec {
  74                         };
  75                 };
  76         };
  77 };
  78
  79 #include "twl4030.dtsi"
  80 #include "twl4030_omap3.dtsi"
  81 #include <dt-bindings/input/input.h>
  82
  83 &venc {
  84         vdda-supply = <&vdac>;
  85 };
  86
  87 &mmc1 {
  88         vmmc-supply = <&vmmc1>;
  89 };
  90
  91 &twl_gpio {
  92         ti,use-leds;
  93         /* pullups: BIT(0) */
  94         ti,pullups = <0x000001>;
  95 };
  96
  97 &twl_keypad {
  98         linux,keymap = <
  99                                 MATRIX_KEY(0x00, 0x01, KEY_A)
 100                                 MATRIX_KEY(0x00, 0x02, KEY_B)
 101                                 MATRIX_KEY(0x00, 0x03, KEY_LEFT)
 102
 103                                 MATRIX_KEY(0x01, 0x01, KEY_UP)
 104                                 MATRIX_KEY(0x01, 0x02, KEY_ENTER)
 105                                 MATRIX_KEY(0x01, 0x03, KEY_DOWN)
 106
 107                                 MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
 108                                 MATRIX_KEY(0x02, 0x02, KEY_C)
 109                                 MATRIX_KEY(0x02, 0x03, KEY_D)
 110                         >;
 111 };
 112
 113 &hsusb1_phy {
 114         reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
 115 };
 116
 117 &hsusb2_phy {
 118         reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
 119 };
 120
 121 &usb_otg_hs {
 122         pinctrl-names = "default";
 123         pinctrl-0 = <&hsusb0_pins>;
 124         interface-type = <0>;
 125         usb-phy = <&usb2_phy>;
 126         phys = <&usb2_phy>;
 127         phy-names = "usb2-phy";
 128         mode = <3>;
 129         power = <50>;
 130 };