x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / arm / boot / dts / omap36xx.dtsi
blobd1a3e56b50cebf80c64a243e499d648101a34ddf
1 /*
2  * Device Tree Source for OMAP3 SoC
3  *
4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This file is licensed under the terms of the GNU General Public License
7  * version 2.  This program is licensed "as is" without any warranty of any
8  * kind, whether express or implied.
9  */
11 #include <dt-bindings/media/omap3-isp.h>
13 #include "omap3.dtsi"
15 / {
16         aliases {
17                 serial3 = &uart4;
18         };
20         cpus {
21                 /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
22                 cpu@0 {
23                         operating-points = <
24                                 /* kHz    uV */
25                                 300000  1012500
26                                 600000  1200000
27                                 800000  1325000
28                         >;
29                         clock-latency = <300000>; /* From legacy driver */
30                 };
31         };
33         ocp@68000000 {
34                 uart4: serial@49042000 {
35                         compatible = "ti,omap3-uart";
36                         reg = <0x49042000 0x400>;
37                         interrupts = <80>;
38                         dmas = <&sdma 81 &sdma 82>;
39                         dma-names = "tx", "rx";
40                         ti,hwmods = "uart4";
41                         clock-frequency = <48000000>;
42                 };
44                 abb_mpu_iva: regulator-abb-mpu {
45                         compatible = "ti,abb-v1";
46                         regulator-name = "abb_mpu_iva";
47                         #address-cells = <0>;
48                         #size-cells = <0>;
49                         reg = <0x483072f0 0x8>, <0x48306818 0x4>;
50                         reg-names = "base-address", "int-address";
51                         ti,tranxdone-status-mask = <0x4000000>;
52                         clocks = <&sys_ck>;
53                         ti,settling-time = <30>;
54                         ti,clock-cycles = <8>;
55                         ti,abb_info = <
56                         /*uV            ABB     efuse   rbb_m   fbb_m   vset_m*/
57                         1012500         0       0       0       0       0
58                         1200000         0       0       0       0       0
59                         1325000         0       0       0       0       0
60                         1375000         1       0       0       0       0
61                         >;
62                 };
64                 omap3_pmx_core2: pinmux@480025a0 {
65                         compatible = "ti,omap3-padconf", "pinctrl-single";
66                         reg = <0x480025a0 0x5c>;
67                         #address-cells = <1>;
68                         #size-cells = <0>;
69                         #pinctrl-cells = <1>;
70                         #interrupt-cells = <1>;
71                         interrupt-controller;
72                         pinctrl-single,register-width = <16>;
73                         pinctrl-single,function-mask = <0xff1f>;
74                 };
76                 isp: isp@480bc000 {
77                         compatible = "ti,omap3-isp";
78                         reg = <0x480bc000 0x12fc
79                                0x480bd800 0x0600>;
80                         interrupts = <24>;
81                         iommus = <&mmu_isp>;
82                         syscon = <&scm_conf 0x2f0>;
83                         ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
84                         #clock-cells = <1>;
85                         ports {
86                                 #address-cells = <1>;
87                                 #size-cells = <0>;
88                         };
89                 };
91                 bandgap@48002524 {
92                         reg = <0x48002524 0x4>;
93                         compatible = "ti,omap36xx-bandgap";
94                         #thermal-sensor-cells = <0>;
95                 };
96         };
99 /* OMAP3630 needs dss_96m_fck for VENC */
100 &venc {
101         clocks = <&dss_tv_fck>, <&dss_96m_fck>;
102         clock-names = "fck", "tv_dac_clk";
105 &ssi {
106         status = "ok";
108         clocks = <&ssi_ssr_fck>,
109                  <&ssi_sst_fck>,
110                  <&ssi_ick>;
111         clock-names = "ssi_ssr_fck",
112                       "ssi_sst_fck",
113                       "ssi_ick";
116 /include/ "omap34xx-omap36xx-clocks.dtsi"
117 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
118 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
119 /include/ "omap36xx-clocks.dtsi"