arch/arm/boot/dts/s3c6410-smdk6410.dts

   1 /*
   2  * Samsung S3C6410 based SMDK6410 board device tree source.
   3  *
   4  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
   5  *
   6  * Device tree source file for SAMSUNG SMDK6410 board which is based on
   7  * Samsung's S3C6410 SoC.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12 */
  13
  14 /dts-v1/;
  15
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18
  19 #include "s3c6410.dtsi"
  20
  21 / {
  22         model = "SAMSUNG SMDK6410 board based on S3C6410";
  23         compatible = "samsung,mini6410", "samsung,s3c6410";
  24
  25         memory {
  26                 reg = <0x50000000 0x8000000>;
  27         };
  28
  29         chosen {
  30                 bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
  31         };
  32
  33         clocks {
  34                 compatible = "simple-bus";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37
  38                 fin_pll: oscillator@0 {
  39                         compatible = "fixed-clock";
  40                         reg = <0>;
  41                         clock-frequency = <12000000>;
  42                         clock-output-names = "fin_pll";
  43                         #clock-cells = <0>;
  44                 };
  45
  46                 xusbxti: oscillator@1 {
  47                         compatible = "fixed-clock";
  48                         reg = <1>;
  49                         clock-output-names = "xusbxti";
  50                         clock-frequency = <48000000>;
  51                         #clock-cells = <0>;
  52                 };
  53         };
  54
  55         srom-cs1@18000000 {
  56                 compatible = "simple-bus";
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 reg = <0x18000000 0x8000000>;
  60                 ranges;
  61
  62                 ethernet@18000000 {
  63                         compatible = "smsc,lan9115";
  64                         reg = <0x18000000 0x10000>;
  65                         interrupt-parent = <&gpn>;
  66                         interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
  67                         phy-mode = "mii";
  68                         reg-io-width = <4>;
  69                         smsc,force-internal-phy;
  70                 };
  71         };
  72 };
  73
  74 &sdhci0 {
  75         pinctrl-names = "default";
  76         pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
  77         bus-width = <4>;
  78         status = "okay";
  79 };
  80
  81 &uart0 {
  82         pinctrl-names = "default";
  83         pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
  84         status = "okay";
  85 };
  86
  87 &uart1 {
  88         pinctrl-names = "default";
  89         pinctrl-0 = <&uart1_data>;
  90         status = "okay";
  91 };
  92
  93 &uart2 {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&uart2_data>;
  96         status = "okay";
  97 };
  98
  99 &uart3 {
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&uart3_data>;
 102         status = "okay";
 103 };