arch/arm/boot/dts/spear600.dtsi

   1 /*
   2  * Copyright 2012 Stefan Roese <sr@denx.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         compatible = "st,spear600";
  16
  17         cpus {
  18                 #address-cells = <0>;
  19                 #size-cells = <0>;
  20
  21                 cpu {
  22                         compatible = "arm,arm926ej-s";
  23                         device_type = "cpu";
  24                 };
  25         };
  26
  27         memory {
  28                 device_type = "memory";
  29                 reg = <0 0x40000000>;
  30         };
  31
  32         ahb {
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 compatible = "simple-bus";
  36                 ranges = <0xd0000000 0xd0000000 0x30000000>;
  37
  38                 vic0: interrupt-controller@f1100000 {
  39                         compatible = "arm,pl190-vic";
  40                         interrupt-controller;
  41                         reg = <0xf1100000 0x1000>;
  42                         #interrupt-cells = <1>;
  43                 };
  44
  45                 vic1: interrupt-controller@f1000000 {
  46                         compatible = "arm,pl190-vic";
  47                         interrupt-controller;
  48                         reg = <0xf1000000 0x1000>;
  49                         #interrupt-cells = <1>;
  50                 };
  51
  52                 clcd@fc200000 {
  53                         compatible = "arm,pl110", "arm,primecell";
  54                         reg = <0xfc200000 0x1000>;
  55                         interrupt-parent = <&vic1>;
  56                         interrupts = <12>;
  57                         status = "disabled";
  58                 };
  59
  60                 dma@fc400000 {
  61                         compatible = "arm,pl080", "arm,primecell";
  62                         reg = <0xfc400000 0x1000>;
  63                         interrupt-parent = <&vic1>;
  64                         interrupts = <10>;
  65                         status = "disabled";
  66                 };
  67
  68                 gmac: ethernet@e0800000 {
  69                         compatible = "st,spear600-gmac";
  70                         reg = <0xe0800000 0x8000>;
  71                         interrupt-parent = <&vic1>;
  72                         interrupts = <24 23>;
  73                         interrupt-names = "macirq", "eth_wake_irq";
  74                         phy-mode = "gmii";
  75                         status = "disabled";
  76                 };
  77
  78                 fsmc: flash@d1800000 {
  79                         compatible = "st,spear600-fsmc-nand";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82                         reg = <0xd1800000 0x1000        /* FSMC Register */
  83                                0xd2000000 0x0010        /* NAND Base DATA */
  84                                0xd2020000 0x0010        /* NAND Base ADDR */
  85                                0xd2010000 0x0010>;      /* NAND Base CMD */
  86                         reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
  87                         status = "disabled";
  88                 };
  89
  90                 smi: flash@fc000000 {
  91                         compatible = "st,spear600-smi";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94                         reg = <0xfc000000 0x1000>;
  95                         interrupt-parent = <&vic1>;
  96                         interrupts = <12>;
  97                         status = "disabled";
  98                 };
  99
 100                 ehci@e1800000 {
 101                         compatible = "st,spear600-ehci", "usb-ehci";
 102                         reg = <0xe1800000 0x1000>;
 103                         interrupt-parent = <&vic1>;
 104                         interrupts = <27>;
 105                         status = "disabled";
 106                 };
 107
 108                 ehci@e2000000 {
 109                         compatible = "st,spear600-ehci", "usb-ehci";
 110                         reg = <0xe2000000 0x1000>;
 111                         interrupt-parent = <&vic1>;
 112                         interrupts = <29>;
 113                         status = "disabled";
 114                 };
 115
 116                 ohci@e1900000 {
 117                         compatible = "st,spear600-ohci", "usb-ohci";
 118                         reg = <0xe1900000 0x1000>;
 119                         interrupt-parent = <&vic1>;
 120                         interrupts = <26>;
 121                         status = "disabled";
 122                 };
 123
 124                 ohci@e2100000 {
 125                         compatible = "st,spear600-ohci", "usb-ohci";
 126                         reg = <0xe2100000 0x1000>;
 127                         interrupt-parent = <&vic1>;
 128                         interrupts = <28>;
 129                         status = "disabled";
 130                 };
 131
 132                 apb {
 133                         #address-cells = <1>;
 134                         #size-cells = <1>;
 135                         compatible = "simple-bus";
 136                         ranges = <0xd0000000 0xd0000000 0x30000000>;
 137
 138                         serial@d0000000 {
 139                                 compatible = "arm,pl011", "arm,primecell";
 140                                 reg = <0xd0000000 0x1000>;
 141                                 interrupt-parent = <&vic0>;
 142                                 interrupts = <24>;
 143                                 status = "disabled";
 144                         };
 145
 146                         serial@d0080000 {
 147                                 compatible = "arm,pl011", "arm,primecell";
 148                                 reg = <0xd0080000 0x1000>;
 149                                 interrupt-parent = <&vic0>;
 150                                 interrupts = <25>;
 151                                 status = "disabled";
 152                         };
 153
 154                         /* local/cpu GPIO */
 155                         gpio0: gpio@f0100000 {
 156                                 #gpio-cells = <2>;
 157                                 compatible = "arm,pl061", "arm,primecell";
 158                                 gpio-controller;
 159                                 reg = <0xf0100000 0x1000>;
 160                                 interrupt-parent = <&vic0>;
 161                                 interrupts = <18>;
 162                         };
 163
 164                         /* basic GPIO */
 165                         gpio1: gpio@fc980000 {
 166                                 #gpio-cells = <2>;
 167                                 compatible = "arm,pl061", "arm,primecell";
 168                                 gpio-controller;
 169                                 reg = <0xfc980000 0x1000>;
 170                                 interrupt-parent = <&vic1>;
 171                                 interrupts = <19>;
 172                         };
 173
 174                         /* appl GPIO */
 175                         gpio2: gpio@d8100000 {
 176                                 #gpio-cells = <2>;
 177                                 compatible = "arm,pl061", "arm,primecell";
 178                                 gpio-controller;
 179                                 reg = <0xd8100000 0x1000>;
 180                                 interrupt-parent = <&vic1>;
 181                                 interrupts = <4>;
 182                         };
 183
 184                         i2c@d0200000 {
 185                                 #address-cells = <1>;
 186                                 #size-cells = <0>;
 187                                 compatible = "snps,designware-i2c";
 188                                 reg = <0xd0200000 0x1000>;
 189                                 interrupt-parent = <&vic0>;
 190                                 interrupts = <28>;
 191                                 status = "disabled";
 192                         };
 193
 194                         rtc@fc900000 {
 195                                 compatible = "st,spear600-rtc";
 196                                 reg = <0xfc900000 0x1000>;
 197                                 interrupts = <10>;
 198                                 status = "disabled";
 199                         };
 200
 201                         timer@f0000000 {
 202                                 compatible = "st,spear-timer";
 203                                 reg = <0xf0000000 0x400>;
 204                                 interrupt-parent = <&vic0>;
 205                                 interrupts = <16>;
 206                         };
 207                 };
 208         };
 209 };