x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / arm / mach-pxa / Makefile
blobef25dc597f30b2ac352530f1a4bc6b84726b5aff
2 # Makefile for the linux kernel.
5 # Common support (must be linked before board specific support)
6 obj-y += devices.o generic.o irq.o reset.o
7 obj-$(CONFIG_PM) += pm.o sleep.o standby.o
9 # Generic drivers that other drivers may depend upon
11 # SoC-specific code
12 obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
13 obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
14 obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
15 obj-$(CONFIG_CPU_PXA300) += pxa300.o
16 obj-$(CONFIG_CPU_PXA320) += pxa320.o
17 obj-$(CONFIG_CPU_PXA930) += pxa930.o
19 # NOTE: keep the order of boards in accordance to their order in Kconfig
21 # Device Tree support
22 obj-$(CONFIG_MACH_PXA25X_DT) += pxa-dt.o
23 obj-$(CONFIG_MACH_PXA27X_DT) += pxa-dt.o
24 obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
26 # Intel/Marvell Dev Platforms
27 obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
28 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
29 obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
30 obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
31 obj-$(CONFIG_MACH_LITTLETON) += littleton.o
32 obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
33 obj-$(CONFIG_MACH_SAAR) += saar.o
35 # 3rd Party Dev Platforms
36 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
37 obj-$(CONFIG_ARCH_VIPER) += viper.o
38 obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
39 obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
40 obj-$(CONFIG_MACH_CSB726) += csb726.o
41 obj-$(CONFIG_CSB726_CSB701) += csb701.o
42 obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
43 ifeq ($(CONFIG_PCI),y)
44 obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
45 endif
46 obj-$(CONFIG_MACH_EM_X270) += em-x270.o
47 obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
48 obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
49 obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
50 obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
51 obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
52 obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
53 obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
54 obj-$(CONFIG_MACH_XCEP) += xcep.o
55 obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
56 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
57 obj-$(CONFIG_MACH_PCM027) += pcm027.o
58 obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
59 obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
60 obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
61 obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
62 obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
63 obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
64 obj-$(CONFIG_MACH_VPAC270) += vpac270.o
66 # End-user Products
67 obj-$(CONFIG_MACH_H4700) += hx4700.o
68 obj-$(CONFIG_MACH_H5000) += h5000.o
69 obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
70 obj-$(CONFIG_MACH_MAGICIAN) += magician.o
71 obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
72 obj-$(CONFIG_PXA_EZX) += ezx.o
73 obj-$(CONFIG_MACH_MP900C) += mp900.o
74 obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
75 obj-$(CONFIG_MACH_PALMTC) += palmtc.o
76 obj-$(CONFIG_MACH_PALM27X) += palm27x.o
77 obj-$(CONFIG_MACH_PALMT5) += palmt5.o
78 obj-$(CONFIG_MACH_PALMTX) += palmtx.o
79 obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
80 obj-$(CONFIG_MACH_PALMLD) += palmld.o
81 obj-$(CONFIG_PALM_TREO) += palmtreo.o
82 obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
83 obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
84 obj-$(CONFIG_MACH_POODLE) += poodle.o
85 obj-$(CONFIG_MACH_TOSA) += tosa.o
86 obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
87 obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
88 obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
89 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
90 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
91 obj-$(CONFIG_MACH_ZIPIT2) += z2.o
93 obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
94 obj-$(CONFIG_TOSA_BT) += tosa-bt.o