x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / m68k / include / asm / m5206sim.h
blob0ddf3efbcae92d2b1ee01cbc254d05ceded3fc3b
1 /****************************************************************************/
3 /*
4 * m5206sim.h -- ColdFire 5206 System Integration Module support.
6 * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
7 * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
8 */
10 /****************************************************************************/
11 #ifndef m5206sim_h
12 #define m5206sim_h
13 /****************************************************************************/
15 #define CPU_NAME "COLDFIRE(m5206)"
16 #define CPU_INSTR_PER_JIFFY 3
17 #define MCF_BUSCLK MCF_CLK
19 #include <asm/m52xxacr.h>
22 * Define the 5206 SIM register set addresses.
24 #define MCFSIM_SIMR (MCF_MBAR + 0x03) /* SIM Config reg */
25 #define MCFSIM_ICR1 (MCF_MBAR + 0x14) /* Intr Ctrl reg 1 */
26 #define MCFSIM_ICR2 (MCF_MBAR + 0x15) /* Intr Ctrl reg 2 */
27 #define MCFSIM_ICR3 (MCF_MBAR + 0x16) /* Intr Ctrl reg 3 */
28 #define MCFSIM_ICR4 (MCF_MBAR + 0x17) /* Intr Ctrl reg 4 */
29 #define MCFSIM_ICR5 (MCF_MBAR + 0x18) /* Intr Ctrl reg 5 */
30 #define MCFSIM_ICR6 (MCF_MBAR + 0x19) /* Intr Ctrl reg 6 */
31 #define MCFSIM_ICR7 (MCF_MBAR + 0x1a) /* Intr Ctrl reg 7 */
32 #define MCFSIM_ICR8 (MCF_MBAR + 0x1b) /* Intr Ctrl reg 8 */
33 #define MCFSIM_ICR9 (MCF_MBAR + 0x1c) /* Intr Ctrl reg 9 */
34 #define MCFSIM_ICR10 (MCF_MBAR + 0x1d) /* Intr Ctrl reg 10 */
35 #define MCFSIM_ICR11 (MCF_MBAR + 0x1e) /* Intr Ctrl reg 11 */
36 #define MCFSIM_ICR12 (MCF_MBAR + 0x1f) /* Intr Ctrl reg 12 */
37 #define MCFSIM_ICR13 (MCF_MBAR + 0x20) /* Intr Ctrl reg 13 */
38 #ifdef CONFIG_M5206e
39 #define MCFSIM_ICR14 (MCF_MBAR + 0x21) /* Intr Ctrl reg 14 */
40 #define MCFSIM_ICR15 (MCF_MBAR + 0x22) /* Intr Ctrl reg 15 */
41 #endif
43 #define MCFSIM_IMR (MCF_MBAR + 0x36) /* Interrupt Mask */
44 #define MCFSIM_IPR (MCF_MBAR + 0x3a) /* Interrupt Pending */
46 #define MCFSIM_RSR (MCF_MBAR + 0x40) /* Reset Status */
47 #define MCFSIM_SYPCR (MCF_MBAR + 0x41) /* System Protection */
49 #define MCFSIM_SWIVR (MCF_MBAR + 0x42) /* SW Watchdog intr */
50 #define MCFSIM_SWSR (MCF_MBAR + 0x43) /* SW Watchdog srv */
52 #define MCFSIM_DCRR (MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */
53 #define MCFSIM_DCTR (MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */
54 #define MCFSIM_DAR0 (MCF_MBAR + 0x4c) /* DRAM 0 Address reg(r/w) */
55 #define MCFSIM_DMR0 (MCF_MBAR + 0x50) /* DRAM 0 Mask reg (r/w) */
56 #define MCFSIM_DCR0 (MCF_MBAR + 0x57) /* DRAM 0 Control reg (r/w) */
57 #define MCFSIM_DAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address reg (r/w) */
58 #define MCFSIM_DMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */
59 #define MCFSIM_DCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */
61 #define MCFSIM_CSAR0 (MCF_MBAR + 0x64) /* CS 0 Address reg */
62 #define MCFSIM_CSMR0 (MCF_MBAR + 0x68) /* CS 0 Mask reg */
63 #define MCFSIM_CSCR0 (MCF_MBAR + 0x6e) /* CS 0 Control reg */
64 #define MCFSIM_CSAR1 (MCF_MBAR + 0x70) /* CS 1 Address reg */
65 #define MCFSIM_CSMR1 (MCF_MBAR + 0x74) /* CS 1 Mask reg */
66 #define MCFSIM_CSCR1 (MCF_MBAR + 0x7a) /* CS 1 Control reg */
67 #define MCFSIM_CSAR2 (MCF_MBAR + 0x7c) /* CS 2 Address reg */
68 #define MCFSIM_CSMR2 (MCF_MBAR + 0x80) /* CS 2 Mask reg */
69 #define MCFSIM_CSCR2 (MCF_MBAR + 0x86) /* CS 2 Control reg */
70 #define MCFSIM_CSAR3 (MCF_MBAR + 0x88) /* CS 3 Address reg */
71 #define MCFSIM_CSMR3 (MCF_MBAR + 0x8c) /* CS 3 Mask reg */
72 #define MCFSIM_CSCR3 (MCF_MBAR + 0x92) /* CS 3 Control reg */
73 #define MCFSIM_CSAR4 (MCF_MBAR + 0x94) /* CS 4 Address reg */
74 #define MCFSIM_CSMR4 (MCF_MBAR + 0x98) /* CS 4 Mask reg */
75 #define MCFSIM_CSCR4 (MCF_MBAR + 0x9e) /* CS 4 Control reg */
76 #define MCFSIM_CSAR5 (MCF_MBAR + 0xa0) /* CS 5 Address reg */
77 #define MCFSIM_CSMR5 (MCF_MBAR + 0xa4) /* CS 5 Mask reg */
78 #define MCFSIM_CSCR5 (MCF_MBAR + 0xaa) /* CS 5 Control reg */
79 #define MCFSIM_CSAR6 (MCF_MBAR + 0xac) /* CS 6 Address reg */
80 #define MCFSIM_CSMR6 (MCF_MBAR + 0xb0) /* CS 6 Mask reg */
81 #define MCFSIM_CSCR6 (MCF_MBAR + 0xb6) /* CS 6 Control reg */
82 #define MCFSIM_CSAR7 (MCF_MBAR + 0xb8) /* CS 7 Address reg */
83 #define MCFSIM_CSMR7 (MCF_MBAR + 0xbc) /* CS 7 Mask reg */
84 #define MCFSIM_CSCR7 (MCF_MBAR + 0xc2) /* CS 7 Control reg */
85 #define MCFSIM_DMCR (MCF_MBAR + 0xc6) /* Default control */
87 #ifdef CONFIG_M5206e
88 #define MCFSIM_PAR (MCF_MBAR + 0xca) /* Pin Assignment */
89 #else
90 #define MCFSIM_PAR (MCF_MBAR + 0xcb) /* Pin Assignment */
91 #endif
93 #define MCFTIMER_BASE1 (MCF_MBAR + 0x100) /* Base of TIMER1 */
94 #define MCFTIMER_BASE2 (MCF_MBAR + 0x120) /* Base of TIMER2 */
96 #define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
97 #define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
99 #define MCFDMA_BASE0 (MCF_MBAR + 0x200) /* Base address DMA 0 */
100 #define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */
102 #if defined(CONFIG_NETtel)
103 #define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */
104 #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
105 #else
106 #define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */
107 #define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */
108 #endif
111 * Define system peripheral IRQ usage.
113 #define MCF_IRQ_I2C0 29 /* I2C, Level 5 */
114 #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
115 #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
116 #define MCF_IRQ_UART0 73 /* UART0 */
117 #define MCF_IRQ_UART1 74 /* UART1 */
120 * Generic GPIO
122 #define MCFGPIO_PIN_MAX 8
123 #define MCFGPIO_IRQ_VECBASE -1
124 #define MCFGPIO_IRQ_MAX -1
127 * Some symbol defines for the Parallel Port Pin Assignment Register
129 #ifdef CONFIG_M5206e
130 #define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
131 /* Clear to select T0 input */
132 #define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
133 /* Clear to select T0 output */
134 #endif
137 * Some symbol defines for the Interrupt Control Register
139 #define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
140 #define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
141 #define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
142 #define MCFSIM_I2CICR MCFSIM_ICR11 /* I2C ICR */
143 #define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
144 #define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
145 #ifdef CONFIG_M5206e
146 #define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
147 #define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
148 #endif
151 * I2C Controller
153 #define MCFI2C_BASE0 (MCF_MBAR + 0x1e0)
154 #define MCFI2C_SIZE0 0x40
156 /****************************************************************************/
157 #endif /* m5206sim_h */