x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / m68k / include / asm / m5272sim.h
blob1fb01bb05d6ca263e73b4756623ed310584d1f67
1 /****************************************************************************/
3 /*
4 * m5272sim.h -- ColdFire 5272 System Integration Module support.
6 * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
7 * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
8 */
10 /****************************************************************************/
11 #ifndef m5272sim_h
12 #define m5272sim_h
13 /****************************************************************************/
15 #define CPU_NAME "COLDFIRE(m5272)"
16 #define CPU_INSTR_PER_JIFFY 3
17 #define MCF_BUSCLK MCF_CLK
19 #include <asm/m52xxacr.h>
22 * Define the 5272 SIM register set addresses.
24 #define MCFSIM_SCR (MCF_MBAR + 0x04) /* SIM Config reg */
25 #define MCFSIM_SPR (MCF_MBAR + 0x06) /* System Protection */
26 #define MCFSIM_PMR (MCF_MBAR + 0x08) /* Power Management */
27 #define MCFSIM_APMR (MCF_MBAR + 0x0e) /* Active Low Power */
28 #define MCFSIM_DIR (MCF_MBAR + 0x10) /* Device Identity */
30 #define MCFSIM_ICR1 (MCF_MBAR + 0x20) /* Intr Ctrl reg 1 */
31 #define MCFSIM_ICR2 (MCF_MBAR + 0x24) /* Intr Ctrl reg 2 */
32 #define MCFSIM_ICR3 (MCF_MBAR + 0x28) /* Intr Ctrl reg 3 */
33 #define MCFSIM_ICR4 (MCF_MBAR + 0x2c) /* Intr Ctrl reg 4 */
35 #define MCFSIM_ISR (MCF_MBAR + 0x30) /* Intr Source */
36 #define MCFSIM_PITR (MCF_MBAR + 0x34) /* Intr Transition */
37 #define MCFSIM_PIWR (MCF_MBAR + 0x38) /* Intr Wakeup */
38 #define MCFSIM_PIVR (MCF_MBAR + 0x3f) /* Intr Vector */
40 #define MCFSIM_WRRR (MCF_MBAR + 0x280) /* Watchdog reference */
41 #define MCFSIM_WIRR (MCF_MBAR + 0x284) /* Watchdog interrupt */
42 #define MCFSIM_WCR (MCF_MBAR + 0x288) /* Watchdog counter */
43 #define MCFSIM_WER (MCF_MBAR + 0x28c) /* Watchdog event */
45 #define MCFSIM_CSBR0 (MCF_MBAR + 0x40) /* CS0 Base Address */
46 #define MCFSIM_CSOR0 (MCF_MBAR + 0x44) /* CS0 Option */
47 #define MCFSIM_CSBR1 (MCF_MBAR + 0x48) /* CS1 Base Address */
48 #define MCFSIM_CSOR1 (MCF_MBAR + 0x4c) /* CS1 Option */
49 #define MCFSIM_CSBR2 (MCF_MBAR + 0x50) /* CS2 Base Address */
50 #define MCFSIM_CSOR2 (MCF_MBAR + 0x54) /* CS2 Option */
51 #define MCFSIM_CSBR3 (MCF_MBAR + 0x58) /* CS3 Base Address */
52 #define MCFSIM_CSOR3 (MCF_MBAR + 0x5c) /* CS3 Option */
53 #define MCFSIM_CSBR4 (MCF_MBAR + 0x60) /* CS4 Base Address */
54 #define MCFSIM_CSOR4 (MCF_MBAR + 0x64) /* CS4 Option */
55 #define MCFSIM_CSBR5 (MCF_MBAR + 0x68) /* CS5 Base Address */
56 #define MCFSIM_CSOR5 (MCF_MBAR + 0x6c) /* CS5 Option */
57 #define MCFSIM_CSBR6 (MCF_MBAR + 0x70) /* CS6 Base Address */
58 #define MCFSIM_CSOR6 (MCF_MBAR + 0x74) /* CS6 Option */
59 #define MCFSIM_CSBR7 (MCF_MBAR + 0x78) /* CS7 Base Address */
60 #define MCFSIM_CSOR7 (MCF_MBAR + 0x7c) /* CS7 Option */
62 #define MCFSIM_SDCR (MCF_MBAR + 0x180) /* SDRAM Config */
63 #define MCFSIM_SDTR (MCF_MBAR + 0x184) /* SDRAM Timing */
64 #define MCFSIM_DCAR0 (MCF_MBAR + 0x4c) /* DRAM 0 Address */
65 #define MCFSIM_DCMR0 (MCF_MBAR + 0x50) /* DRAM 0 Mask */
66 #define MCFSIM_DCCR0 (MCF_MBAR + 0x57) /* DRAM 0 Control */
67 #define MCFSIM_DCAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address */
68 #define MCFSIM_DCMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg */
69 #define MCFSIM_DCCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control */
71 #define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */
72 #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
74 #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
75 #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
76 #define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */
77 #define MCFSIM_PBCNT (MCF_MBAR + 0x88) /* Port B Control (r/w) */
78 #define MCFSIM_PBDDR (MCF_MBAR + 0x8c) /* Port B Direction (r/w) */
79 #define MCFSIM_PBDAT (MCF_MBAR + 0x8e) /* Port B Data (r/w) */
80 #define MCFSIM_PCDDR (MCF_MBAR + 0x94) /* Port C Direction (r/w) */
81 #define MCFSIM_PCDAT (MCF_MBAR + 0x96) /* Port C Data (r/w) */
82 #define MCFSIM_PDCNT (MCF_MBAR + 0x98) /* Port D Control (r/w) */
84 #define MCFDMA_BASE0 (MCF_MBAR + 0xe0) /* Base address DMA 0 */
86 #define MCFTIMER_BASE1 (MCF_MBAR + 0x200) /* Base address TIMER1 */
87 #define MCFTIMER_BASE2 (MCF_MBAR + 0x220) /* Base address TIMER2 */
88 #define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */
89 #define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */
91 #define MCFFEC_BASE0 (MCF_MBAR + 0x840) /* Base FEC ethernet */
92 #define MCFFEC_SIZE0 0x1d0
95 * Define system peripheral IRQ usage.
97 #define MCFINT_VECBASE 64 /* Base of interrupts */
98 #define MCF_IRQ_SPURIOUS 64 /* User Spurious */
99 #define MCF_IRQ_EINT1 65 /* External Interrupt 1 */
100 #define MCF_IRQ_EINT2 66 /* External Interrupt 2 */
101 #define MCF_IRQ_EINT3 67 /* External Interrupt 3 */
102 #define MCF_IRQ_EINT4 68 /* External Interrupt 4 */
103 #define MCF_IRQ_TIMER1 69 /* Timer 1 */
104 #define MCF_IRQ_TIMER2 70 /* Timer 2 */
105 #define MCF_IRQ_TIMER3 71 /* Timer 3 */
106 #define MCF_IRQ_TIMER4 72 /* Timer 4 */
107 #define MCF_IRQ_UART0 73 /* UART 0 */
108 #define MCF_IRQ_UART1 74 /* UART 1 */
109 #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */
110 #define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */
111 #define MCF_IRQ_USB0 77 /* USB Endpoint 0 */
112 #define MCF_IRQ_USB1 78 /* USB Endpoint 1 */
113 #define MCF_IRQ_USB2 79 /* USB Endpoint 2 */
114 #define MCF_IRQ_USB3 80 /* USB Endpoint 3 */
115 #define MCF_IRQ_USB4 81 /* USB Endpoint 4 */
116 #define MCF_IRQ_USB5 82 /* USB Endpoint 5 */
117 #define MCF_IRQ_USB6 83 /* USB Endpoint 6 */
118 #define MCF_IRQ_USB7 84 /* USB Endpoint 7 */
119 #define MCF_IRQ_DMA 85 /* DMA Controller */
120 #define MCF_IRQ_FECRX0 86 /* Ethernet Receiver */
121 #define MCF_IRQ_FECTX0 87 /* Ethernet Transmitter */
122 #define MCF_IRQ_FECENTC0 88 /* Ethernet Non-Time Critical */
123 #define MCF_IRQ_QSPI 89 /* Queued Serial Interface */
124 #define MCF_IRQ_EINT5 90 /* External Interrupt 5 */
125 #define MCF_IRQ_EINT6 91 /* External Interrupt 6 */
126 #define MCF_IRQ_SWTO 92 /* Software Watchdog */
127 #define MCFINT_VECMAX 95 /* Maxmum interrupt */
129 #define MCF_IRQ_TIMER MCF_IRQ_TIMER1
130 #define MCF_IRQ_PROFILER MCF_IRQ_TIMER2
133 * Generic GPIO support
135 #define MCFGPIO_PIN_MAX 48
136 #define MCFGPIO_IRQ_MAX -1
137 #define MCFGPIO_IRQ_VECBASE -1
139 /****************************************************************************/
140 #endif /* m5272sim_h */