2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
64 major You may use this parameter to override the
65 default major number (45) that this driver
66 will use. Be sure to change the device
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
100 In addition, you can use the parameter pd.disable to disable
107 1.01 GRG 1997.01.24 Restored pd_reset()
109 1.02 GRG 1998.05.06 SMP spinlock changes,
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
127 #include <linux/types.h>
129 static int verbose
= 0;
130 static int major
= PD_MAJOR
;
131 static char *name
= PD_NAME
;
132 static int cluster
= 64;
134 static int disable
= 0;
136 static int drive0
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
141 static int (*drives
[4])[8] = {&drive0
, &drive1
, &drive2
, &drive3
};
143 enum {D_PRT
, D_PRO
, D_UNI
, D_MOD
, D_GEO
, D_SBY
, D_DLY
, D_SLV
};
145 /* end of parameters */
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blkdev.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <linux/uaccess.h>
159 #include <linux/workqueue.h>
161 static DEFINE_MUTEX(pd_mutex
);
162 static DEFINE_SPINLOCK(pd_lock
);
164 module_param(verbose
, int, 0);
165 module_param(major
, int, 0);
166 module_param(name
, charp
, 0);
167 module_param(cluster
, int, 0);
168 module_param(nice
, int, 0);
169 module_param_array(drive0
, int, NULL
, 0);
170 module_param_array(drive1
, int, NULL
, 0);
171 module_param_array(drive2
, int, NULL
, 0);
172 module_param_array(drive3
, int, NULL
, 0);
178 /* numbers for "SCSI" geometry */
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
224 struct pi_adapter pia
; /* interface to paride layer */
225 struct pi_adapter
*pi
;
226 int access
; /* count of active opens ... */
227 int capacity
; /* Size of this volume in sectors */
228 int heads
; /* physical geometry */
232 int drive
; /* master=0 slave=1 */
233 int changed
; /* Have we seen a disk change ? */
234 int removable
; /* removable media device ? */
237 char name
[PD_NAMELEN
]; /* pda, pdb, etc ... */
241 static struct pd_unit pd
[PD_UNITS
];
243 static char pd_scratch
[512]; /* scratch block buffer */
245 static char *pd_errs
[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
246 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
247 "IDNF", "MC", "UNC", "???", "TMO"
250 static void *par_drv
; /* reference of parport driver */
252 static inline int status_reg(struct pd_unit
*disk
)
254 return pi_read_regr(disk
->pi
, 1, 6);
257 static inline int read_reg(struct pd_unit
*disk
, int reg
)
259 return pi_read_regr(disk
->pi
, 0, reg
);
262 static inline void write_status(struct pd_unit
*disk
, int val
)
264 pi_write_regr(disk
->pi
, 1, 6, val
);
267 static inline void write_reg(struct pd_unit
*disk
, int reg
, int val
)
269 pi_write_regr(disk
->pi
, 0, reg
, val
);
272 static inline u8
DRIVE(struct pd_unit
*disk
)
274 return 0xa0+0x10*disk
->drive
;
277 /* ide command interface */
279 static void pd_print_error(struct pd_unit
*disk
, char *msg
, int status
)
283 printk("%s: %s: status = 0x%x =", disk
->name
, msg
, status
);
284 for (i
= 0; i
< ARRAY_SIZE(pd_errs
); i
++)
285 if (status
& (1 << i
))
286 printk(" %s", pd_errs
[i
]);
290 static void pd_reset(struct pd_unit
*disk
)
291 { /* called only for MASTER drive */
292 write_status(disk
, 4);
294 write_status(disk
, 0);
298 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
300 static int pd_wait_for(struct pd_unit
*disk
, int w
, char *msg
)
305 while (k
< PD_SPIN
) {
306 r
= status_reg(disk
);
308 if (((r
& w
) == w
) && !(r
& STAT_BUSY
))
312 e
= (read_reg(disk
, 1) << 8) + read_reg(disk
, 7);
315 if ((e
& (STAT_ERR
| ERR_TMO
)) && (msg
!= NULL
))
316 pd_print_error(disk
, msg
, e
);
320 static void pd_send_command(struct pd_unit
*disk
, int n
, int s
, int h
, int c0
, int c1
, int func
)
322 write_reg(disk
, 6, DRIVE(disk
) + h
);
323 write_reg(disk
, 1, 0); /* the IDE task file */
324 write_reg(disk
, 2, n
);
325 write_reg(disk
, 3, s
);
326 write_reg(disk
, 4, c0
);
327 write_reg(disk
, 5, c1
);
328 write_reg(disk
, 7, func
);
333 static void pd_ide_command(struct pd_unit
*disk
, int func
, int block
, int count
)
339 c0
= (block
>>= 8) & 255;
340 c1
= (block
>>= 8) & 255;
341 h
= ((block
>>= 8) & 15) + 0x40;
343 s
= (block
% disk
->sectors
) + 1;
344 h
= (block
/= disk
->sectors
) % disk
->heads
;
345 c0
= (block
/= disk
->heads
) % 256;
348 pd_send_command(disk
, count
, s
, h
, c0
, c1
, func
);
351 /* The i/o request engine */
353 enum action
{Fail
= 0, Ok
= 1, Hold
, Wait
};
355 static struct request
*pd_req
; /* current request */
356 static enum action (*phase
)(void);
358 static void run_fsm(void);
360 static void ps_tq_int(struct work_struct
*work
);
362 static DECLARE_DELAYED_WORK(fsm_tq
, ps_tq_int
);
364 static void schedule_fsm(void)
367 schedule_delayed_work(&fsm_tq
, 0);
369 schedule_delayed_work(&fsm_tq
, nice
-1);
372 static void ps_tq_int(struct work_struct
*work
)
377 static enum action
do_pd_io_start(void);
378 static enum action
pd_special(void);
379 static enum action
do_pd_read_start(void);
380 static enum action
do_pd_write_start(void);
381 static enum action
do_pd_read_drq(void);
382 static enum action
do_pd_write_done(void);
384 static struct request_queue
*pd_queue
;
385 static int pd_claimed
;
387 static struct pd_unit
*pd_current
; /* current request's drive */
388 static PIA
*pi_current
; /* current request's PIA */
390 static void run_fsm(void)
394 unsigned long saved_flags
;
398 pd_current
= pd_req
->rq_disk
->private_data
;
399 pi_current
= pd_current
->pi
;
400 phase
= do_pd_io_start
;
403 switch (pd_claimed
) {
406 if (!pi_schedule_claimed(pi_current
, run_fsm
))
410 pi_current
->proto
->connect(pi_current
);
413 switch(res
= phase()) {
415 pi_disconnect(pi_current
);
418 spin_lock_irqsave(&pd_lock
, saved_flags
);
419 if (!__blk_end_request_cur(pd_req
,
420 res
== Ok
? 0 : -EIO
)) {
421 pd_req
= blk_fetch_request(pd_queue
);
425 spin_unlock_irqrestore(&pd_lock
, saved_flags
);
432 pi_disconnect(pi_current
);
438 static int pd_retries
= 0; /* i/o error retry count */
439 static int pd_block
; /* address of next requested block */
440 static int pd_count
; /* number of blocks still to do */
441 static int pd_run
; /* sectors in current cluster */
442 static char *pd_buf
; /* buffer for request in progress */
444 static enum action
do_pd_io_start(void)
446 switch (req_op(pd_req
)) {
452 pd_block
= blk_rq_pos(pd_req
);
453 pd_count
= blk_rq_cur_sectors(pd_req
);
454 if (pd_block
+ pd_count
> get_capacity(pd_req
->rq_disk
))
456 pd_run
= blk_rq_sectors(pd_req
);
457 pd_buf
= bio_data(pd_req
->bio
);
459 if (req_op(pd_req
) == REQ_OP_READ
)
460 return do_pd_read_start();
462 return do_pd_write_start();
467 static enum action
pd_special(void)
469 enum action (*func
)(struct pd_unit
*) = pd_req
->special
;
470 return func(pd_current
);
473 static int pd_next_buf(void)
475 unsigned long saved_flags
;
485 spin_lock_irqsave(&pd_lock
, saved_flags
);
486 __blk_end_request_cur(pd_req
, 0);
487 pd_count
= blk_rq_cur_sectors(pd_req
);
488 pd_buf
= bio_data(pd_req
->bio
);
489 spin_unlock_irqrestore(&pd_lock
, saved_flags
);
493 static unsigned long pd_timeout
;
495 static enum action
do_pd_read_start(void)
497 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_read") & STAT_ERR
) {
498 if (pd_retries
< PD_MAX_RETRIES
) {
504 pd_ide_command(pd_current
, IDE_READ
, pd_block
, pd_run
);
505 phase
= do_pd_read_drq
;
506 pd_timeout
= jiffies
+ PD_TMO
;
510 static enum action
do_pd_write_start(void)
512 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_write") & STAT_ERR
) {
513 if (pd_retries
< PD_MAX_RETRIES
) {
519 pd_ide_command(pd_current
, IDE_WRITE
, pd_block
, pd_run
);
521 if (pd_wait_for(pd_current
, STAT_DRQ
, "do_pd_write_drq") & STAT_ERR
) {
522 if (pd_retries
< PD_MAX_RETRIES
) {
528 pi_write_block(pd_current
->pi
, pd_buf
, 512);
532 phase
= do_pd_write_done
;
533 pd_timeout
= jiffies
+ PD_TMO
;
537 static inline int pd_ready(void)
539 return !(status_reg(pd_current
) & STAT_BUSY
);
542 static enum action
do_pd_read_drq(void)
544 if (!pd_ready() && !time_after_eq(jiffies
, pd_timeout
))
548 if (pd_wait_for(pd_current
, STAT_DRQ
, "do_pd_read_drq") & STAT_ERR
) {
549 if (pd_retries
< PD_MAX_RETRIES
) {
551 phase
= do_pd_read_start
;
556 pi_read_block(pd_current
->pi
, pd_buf
, 512);
563 static enum action
do_pd_write_done(void)
565 if (!pd_ready() && !time_after_eq(jiffies
, pd_timeout
))
568 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_write_done") & STAT_ERR
) {
569 if (pd_retries
< PD_MAX_RETRIES
) {
571 phase
= do_pd_write_start
;
579 /* special io requests */
581 /* According to the ATA standard, the default CHS geometry should be
582 available following a reset. Some Western Digital drives come up
583 in a mode where only LBA addresses are accepted until the device
584 parameters are initialised.
587 static void pd_init_dev_parms(struct pd_unit
*disk
)
589 pd_wait_for(disk
, 0, DBMSG("before init_dev_parms"));
590 pd_send_command(disk
, disk
->sectors
, 0, disk
->heads
- 1, 0, 0,
593 pd_wait_for(disk
, 0, "Initialise device parameters");
596 static enum action
pd_door_lock(struct pd_unit
*disk
)
598 if (!(pd_wait_for(disk
, STAT_READY
, "Lock") & STAT_ERR
)) {
599 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORLOCK
);
600 pd_wait_for(disk
, STAT_READY
, "Lock done");
605 static enum action
pd_door_unlock(struct pd_unit
*disk
)
607 if (!(pd_wait_for(disk
, STAT_READY
, "Lock") & STAT_ERR
)) {
608 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORUNLOCK
);
609 pd_wait_for(disk
, STAT_READY
, "Lock done");
614 static enum action
pd_eject(struct pd_unit
*disk
)
616 pd_wait_for(disk
, 0, DBMSG("before unlock on eject"));
617 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORUNLOCK
);
618 pd_wait_for(disk
, 0, DBMSG("after unlock on eject"));
619 pd_wait_for(disk
, 0, DBMSG("before eject"));
620 pd_send_command(disk
, 0, 0, 0, 0, 0, IDE_EJECT
);
621 pd_wait_for(disk
, 0, DBMSG("after eject"));
625 static enum action
pd_media_check(struct pd_unit
*disk
)
627 int r
= pd_wait_for(disk
, STAT_READY
, DBMSG("before media_check"));
628 if (!(r
& STAT_ERR
)) {
629 pd_send_command(disk
, 1, 1, 0, 0, 0, IDE_READ_VRFY
);
630 r
= pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after READ_VRFY"));
632 disk
->changed
= 1; /* say changed if other error */
635 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_ACKCHANGE
);
636 pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after ACKCHANGE"));
637 pd_send_command(disk
, 1, 1, 0, 0, 0, IDE_READ_VRFY
);
638 r
= pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after VRFY"));
643 static void pd_standby_off(struct pd_unit
*disk
)
645 pd_wait_for(disk
, 0, DBMSG("before STANDBY"));
646 pd_send_command(disk
, 0, 0, 0, 0, 0, IDE_STANDBY
);
647 pd_wait_for(disk
, 0, DBMSG("after STANDBY"));
650 static enum action
pd_identify(struct pd_unit
*disk
)
653 char id
[PD_ID_LEN
+ 1];
655 /* WARNING: here there may be dragons. reset() applies to both drives,
656 but we call it only on probing the MASTER. This should allow most
657 common configurations to work, but be warned that a reset can clear
658 settings on the SLAVE drive.
661 if (disk
->drive
== 0)
664 write_reg(disk
, 6, DRIVE(disk
));
665 pd_wait_for(disk
, 0, DBMSG("before IDENT"));
666 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_IDENTIFY
);
668 if (pd_wait_for(disk
, STAT_DRQ
, DBMSG("IDENT DRQ")) & STAT_ERR
)
670 pi_read_block(disk
->pi
, pd_scratch
, 512);
671 disk
->can_lba
= pd_scratch
[99] & 2;
672 disk
->sectors
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 12));
673 disk
->heads
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 6));
674 disk
->cylinders
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 2));
676 disk
->capacity
= le32_to_cpu(*(__le32
*) (pd_scratch
+ 120));
678 disk
->capacity
= disk
->sectors
* disk
->heads
* disk
->cylinders
;
680 for (j
= 0; j
< PD_ID_LEN
; j
++)
681 id
[j
^ 1] = pd_scratch
[j
+ PD_ID_OFF
];
683 while ((j
>= 0) && (id
[j
] <= 0x20))
688 disk
->removable
= pd_scratch
[0] & 0x80;
690 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
692 disk
->drive
? "slave" : "master",
693 disk
->capacity
, disk
->capacity
/ 2048,
694 disk
->cylinders
, disk
->heads
, disk
->sectors
,
695 disk
->removable
? "removable" : "fixed");
698 pd_init_dev_parms(disk
);
700 pd_standby_off(disk
);
705 /* end of io request engine */
707 static void do_pd_request(struct request_queue
* q
)
711 pd_req
= blk_fetch_request(q
);
718 static int pd_special_command(struct pd_unit
*disk
,
719 enum action (*func
)(struct pd_unit
*disk
))
724 rq
= blk_get_request(disk
->gd
->queue
, REQ_OP_DRV_IN
, __GFP_RECLAIM
);
730 err
= blk_execute_rq(disk
->gd
->queue
, disk
->gd
, rq
, 0);
736 /* kernel glue structures */
738 static int pd_open(struct block_device
*bdev
, fmode_t mode
)
740 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
742 mutex_lock(&pd_mutex
);
745 if (disk
->removable
) {
746 pd_special_command(disk
, pd_media_check
);
747 pd_special_command(disk
, pd_door_lock
);
749 mutex_unlock(&pd_mutex
);
753 static int pd_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
755 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
757 if (disk
->alt_geom
) {
758 geo
->heads
= PD_LOG_HEADS
;
759 geo
->sectors
= PD_LOG_SECTS
;
760 geo
->cylinders
= disk
->capacity
/ (geo
->heads
* geo
->sectors
);
762 geo
->heads
= disk
->heads
;
763 geo
->sectors
= disk
->sectors
;
764 geo
->cylinders
= disk
->cylinders
;
770 static int pd_ioctl(struct block_device
*bdev
, fmode_t mode
,
771 unsigned int cmd
, unsigned long arg
)
773 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
777 mutex_lock(&pd_mutex
);
778 if (disk
->access
== 1)
779 pd_special_command(disk
, pd_eject
);
780 mutex_unlock(&pd_mutex
);
787 static void pd_release(struct gendisk
*p
, fmode_t mode
)
789 struct pd_unit
*disk
= p
->private_data
;
791 mutex_lock(&pd_mutex
);
792 if (!--disk
->access
&& disk
->removable
)
793 pd_special_command(disk
, pd_door_unlock
);
794 mutex_unlock(&pd_mutex
);
797 static unsigned int pd_check_events(struct gendisk
*p
, unsigned int clearing
)
799 struct pd_unit
*disk
= p
->private_data
;
801 if (!disk
->removable
)
803 pd_special_command(disk
, pd_media_check
);
806 return r
? DISK_EVENT_MEDIA_CHANGE
: 0;
809 static int pd_revalidate(struct gendisk
*p
)
811 struct pd_unit
*disk
= p
->private_data
;
812 if (pd_special_command(disk
, pd_identify
) == 0)
813 set_capacity(p
, disk
->capacity
);
819 static const struct block_device_operations pd_fops
= {
820 .owner
= THIS_MODULE
,
822 .release
= pd_release
,
825 .check_events
= pd_check_events
,
826 .revalidate_disk
= pd_revalidate
831 static void pd_probe_drive(struct pd_unit
*disk
)
833 struct gendisk
*p
= alloc_disk(1 << PD_BITS
);
836 strcpy(p
->disk_name
, disk
->name
);
839 p
->first_minor
= (disk
- pd
) << PD_BITS
;
841 p
->private_data
= disk
;
844 if (disk
->drive
== -1) {
845 for (disk
->drive
= 0; disk
->drive
<= 1; disk
->drive
++)
846 if (pd_special_command(disk
, pd_identify
) == 0)
848 } else if (pd_special_command(disk
, pd_identify
) == 0)
854 static int pd_detect(void)
856 int found
= 0, unit
, pd_drive_count
= 0;
857 struct pd_unit
*disk
;
859 for (unit
= 0; unit
< PD_UNITS
; unit
++) {
860 int *parm
= *drives
[unit
];
861 struct pd_unit
*disk
= pd
+ unit
;
862 disk
->pi
= &disk
->pia
;
866 disk
->drive
= parm
[D_SLV
];
867 snprintf(disk
->name
, PD_NAMELEN
, "%s%c", name
, 'a'+unit
);
868 disk
->alt_geom
= parm
[D_GEO
];
869 disk
->standby
= parm
[D_SBY
];
874 par_drv
= pi_register_driver(name
);
876 pr_err("failed to register %s driver\n", name
);
880 if (pd_drive_count
== 0) { /* nothing spec'd - so autoprobe for 1 */
882 if (pi_init(disk
->pi
, 1, -1, -1, -1, -1, -1, pd_scratch
,
883 PI_PD
, verbose
, disk
->name
)) {
884 pd_probe_drive(disk
);
886 pi_release(disk
->pi
);
890 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
891 int *parm
= *drives
[unit
];
894 if (pi_init(disk
->pi
, 0, parm
[D_PRT
], parm
[D_MOD
],
895 parm
[D_UNI
], parm
[D_PRO
], parm
[D_DLY
],
896 pd_scratch
, PI_PD
, verbose
, disk
->name
)) {
897 pd_probe_drive(disk
);
899 pi_release(disk
->pi
);
903 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
905 set_capacity(disk
->gd
, disk
->capacity
);
911 printk("%s: no valid drive found\n", name
);
912 pi_unregister_driver(par_drv
);
917 static int __init
pd_init(void)
922 pd_queue
= blk_init_queue(do_pd_request
, &pd_lock
);
926 blk_queue_max_hw_sectors(pd_queue
, cluster
);
928 if (register_blkdev(major
, name
))
931 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
932 name
, name
, PD_VERSION
, major
, cluster
, nice
);
939 unregister_blkdev(major
, name
);
941 blk_cleanup_queue(pd_queue
);
946 static void __exit
pd_exit(void)
948 struct pd_unit
*disk
;
950 unregister_blkdev(major
, name
);
951 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
952 struct gendisk
*p
= disk
->gd
;
957 pi_release(disk
->pi
);
960 blk_cleanup_queue(pd_queue
);
963 MODULE_LICENSE("GPL");