x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / hid / intel-ish-hid / ipc / hw-ish-regs.h
bloba5897b9c0956a1fe0a09e01f6d5aec3563350145
1 /*
2 * ISH registers definitions
4 * Copyright (c) 2012-2016, Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
16 #ifndef _ISHTP_ISH_REGS_H_
17 #define _ISHTP_ISH_REGS_H_
20 /*** IPC PCI Offsets and sizes ***/
21 /* ISH IPC Base Address */
22 #define IPC_REG_BASE 0x0000
23 /* Peripheral Interrupt Status Register */
24 #define IPC_REG_PISR_CHV_AB (IPC_REG_BASE + 0x00)
25 /* Peripheral Interrupt Mask Register */
26 #define IPC_REG_PIMR_CHV_AB (IPC_REG_BASE + 0x04)
27 /*BXT, CHV_K0*/
28 /*Peripheral Interrupt Status Register */
29 #define IPC_REG_PISR_BXT (IPC_REG_BASE + 0x0C)
30 /*Peripheral Interrupt Mask Register */
31 #define IPC_REG_PIMR_BXT (IPC_REG_BASE + 0x08)
32 /***********************************/
33 /* ISH Host Firmware status Register */
34 #define IPC_REG_ISH_HOST_FWSTS (IPC_REG_BASE + 0x34)
35 /* Host Communication Register */
36 #define IPC_REG_HOST_COMM (IPC_REG_BASE + 0x38)
37 /* Reset register */
38 #define IPC_REG_ISH_RST (IPC_REG_BASE + 0x44)
40 /* Inbound doorbell register Host to ISH */
41 #define IPC_REG_HOST2ISH_DRBL (IPC_REG_BASE + 0x48)
42 /* Outbound doorbell register ISH to Host */
43 #define IPC_REG_ISH2HOST_DRBL (IPC_REG_BASE + 0x54)
44 /* ISH to HOST message registers */
45 #define IPC_REG_ISH2HOST_MSG (IPC_REG_BASE + 0x60)
46 /* HOST to ISH message registers */
47 #define IPC_REG_HOST2ISH_MSG (IPC_REG_BASE + 0xE0)
48 /* REMAP2 to enable DMA (D3 RCR) */
49 #define IPC_REG_ISH_RMP2 (IPC_REG_BASE + 0x368)
51 #define IPC_REG_MAX (IPC_REG_BASE + 0x400)
53 /*** register bits - HISR ***/
54 /* bit corresponds HOST2ISH interrupt in PISR and PIMR registers */
55 #define IPC_INT_HOST2ISH_BIT (1<<0)
56 /***********************************/
57 /*CHV_A0, CHV_B0*/
58 /* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
59 #define IPC_INT_ISH2HOST_BIT_CHV_AB (1<<3)
60 /*BXT, CHV_K0*/
61 /* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
62 #define IPC_INT_ISH2HOST_BIT_BXT (1<<0)
63 /***********************************/
65 /* bit corresponds ISH2HOST busy clear interrupt in PIMR register */
66 #define IPC_INT_ISH2HOST_CLR_MASK_BIT (1<<11)
68 /* offset of ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
69 #define IPC_INT_ISH2HOST_CLR_OFFS (0)
71 /* bit corresponds ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
72 #define IPC_INT_ISH2HOST_CLR_BIT (1<<IPC_INT_ISH2HOST_CLR_OFFS)
74 /* bit corresponds busy bit in doorbell registers */
75 #define IPC_DRBL_BUSY_OFFS (31)
76 #define IPC_DRBL_BUSY_BIT (1<<IPC_DRBL_BUSY_OFFS)
78 #define IPC_HOST_OWNS_MSG_OFFS (30)
81 * A0: bit means that host owns MSGnn registers and is reading them.
82 * ISH FW may not write to them
84 #define IPC_HOST_OWNS_MSG_BIT (1<<IPC_HOST_OWNS_MSG_OFFS)
87 * Host status bits (HOSTCOMM)
89 /* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
90 #define IPC_HOSTCOMM_READY_OFFS (7)
91 #define IPC_HOSTCOMM_READY_BIT (1<<IPC_HOSTCOMM_READY_OFFS)
93 /***********************************/
94 /*CHV_A0, CHV_B0*/
95 #define IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB (31)
96 #define IPC_HOSTCOMM_INT_EN_BIT_CHV_AB \
97 (1<<IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB)
98 /*BXT, CHV_K0*/
99 #define IPC_PIMR_INT_EN_OFFS_BXT (0)
100 #define IPC_PIMR_INT_EN_BIT_BXT (1<<IPC_PIMR_INT_EN_OFFS_BXT)
102 #define IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT (8)
103 #define IPC_HOST2ISH_BUSYCLEAR_MASK_BIT \
104 (1<<IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT)
105 /***********************************/
107 * both Host and ISH have ILUP at bit 0
108 * bit corresponds host ready bit in both status registers
110 #define IPC_ILUP_OFFS (0)
111 #define IPC_ILUP_BIT (1<<IPC_ILUP_OFFS)
114 * ISH FW status bits in ISH FW Status Register
116 #define IPC_ISH_FWSTS_SHIFT 12
117 #define IPC_ISH_FWSTS_MASK GENMASK(15, 12)
118 #define IPC_GET_ISH_FWSTS(status) \
119 (((status) & IPC_ISH_FWSTS_MASK) >> IPC_ISH_FWSTS_SHIFT)
122 * FW status bits (relevant)
124 #define IPC_FWSTS_ILUP 0x1
125 #define IPC_FWSTS_ISHTP_UP (1<<1)
126 #define IPC_FWSTS_DMA0 (1<<16)
127 #define IPC_FWSTS_DMA1 (1<<17)
128 #define IPC_FWSTS_DMA2 (1<<18)
129 #define IPC_FWSTS_DMA3 (1<<19)
131 #define IPC_ISH_IN_DMA \
132 (IPC_FWSTS_DMA0 | IPC_FWSTS_DMA1 | IPC_FWSTS_DMA2 | IPC_FWSTS_DMA3)
134 /* bit corresponds host ready bit in ISH FW Status Register */
135 #define IPC_ISH_ISHTP_READY_OFFS (1)
136 #define IPC_ISH_ISHTP_READY_BIT (1<<IPC_ISH_ISHTP_READY_OFFS)
138 #define IPC_RMP2_DMA_ENABLED 0x1 /* Value to enable DMA, per D3 RCR */
140 #define IPC_MSG_MAX_SIZE 0x80
143 #define IPC_HEADER_LENGTH_MASK 0x03FF
144 #define IPC_HEADER_PROTOCOL_MASK 0x0F
145 #define IPC_HEADER_MNG_CMD_MASK 0x0F
147 #define IPC_HEADER_LENGTH_OFFSET 0
148 #define IPC_HEADER_PROTOCOL_OFFSET 10
149 #define IPC_HEADER_MNG_CMD_OFFSET 16
151 #define IPC_HEADER_GET_LENGTH(drbl_reg) \
152 (((drbl_reg) >> IPC_HEADER_LENGTH_OFFSET)&IPC_HEADER_LENGTH_MASK)
153 #define IPC_HEADER_GET_PROTOCOL(drbl_reg) \
154 (((drbl_reg) >> IPC_HEADER_PROTOCOL_OFFSET)&IPC_HEADER_PROTOCOL_MASK)
155 #define IPC_HEADER_GET_MNG_CMD(drbl_reg) \
156 (((drbl_reg) >> IPC_HEADER_MNG_CMD_OFFSET)&IPC_HEADER_MNG_CMD_MASK)
158 #define IPC_IS_BUSY(drbl_reg) \
159 (((drbl_reg)&IPC_DRBL_BUSY_BIT) == ((uint32_t)IPC_DRBL_BUSY_BIT))
161 /***********************************/
162 /*CHV_A0, CHV_B0*/
163 #define IPC_INT_FROM_ISH_TO_HOST_CHV_AB(drbl_reg) \
164 (((drbl_reg)&IPC_INT_ISH2HOST_BIT_CHV_AB) == \
165 ((u32)IPC_INT_ISH2HOST_BIT_CHV_AB))
166 /*BXT, CHV_K0*/
167 #define IPC_INT_FROM_ISH_TO_HOST_BXT(drbl_reg) \
168 (((drbl_reg)&IPC_INT_ISH2HOST_BIT_BXT) == \
169 ((u32)IPC_INT_ISH2HOST_BIT_BXT))
170 /***********************************/
172 #define IPC_BUILD_HEADER(length, protocol, busy) \
173 (((busy)<<IPC_DRBL_BUSY_OFFS) | \
174 ((protocol) << IPC_HEADER_PROTOCOL_OFFSET) | \
175 ((length)<<IPC_HEADER_LENGTH_OFFSET))
177 #define IPC_BUILD_MNG_MSG(cmd, length) \
178 (((1)<<IPC_DRBL_BUSY_OFFS)| \
179 ((IPC_PROTOCOL_MNG)<<IPC_HEADER_PROTOCOL_OFFSET)| \
180 ((cmd)<<IPC_HEADER_MNG_CMD_OFFSET)| \
181 ((length)<<IPC_HEADER_LENGTH_OFFSET))
184 #define IPC_SET_HOST_READY(host_status) \
185 ((host_status) |= (IPC_HOSTCOMM_READY_BIT))
187 #define IPC_SET_HOST_ILUP(host_status) \
188 ((host_status) |= (IPC_ILUP_BIT))
190 #define IPC_CLEAR_HOST_READY(host_status) \
191 ((host_status) ^= (IPC_HOSTCOMM_READY_BIT))
193 #define IPC_CLEAR_HOST_ILUP(host_status) \
194 ((host_status) ^= (IPC_ILUP_BIT))
196 /* todo - temp until PIMR HW ready */
197 #define IPC_HOST_BUSY_READING_OFFS 6
199 /* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
200 #define IPC_HOST_BUSY_READING_BIT (1<<IPC_HOST_BUSY_READING_OFFS)
202 #define IPC_SET_HOST_BUSY_READING(host_status) \
203 ((host_status) |= (IPC_HOST_BUSY_READING_BIT))
205 #define IPC_CLEAR_HOST_BUSY_READING(host_status)\
206 ((host_status) ^= (IPC_HOST_BUSY_READING_BIT))
209 #define IPC_IS_ISH_ISHTP_READY(ish_status) \
210 (((ish_status) & IPC_ISH_ISHTP_READY_BIT) == \
211 ((uint32_t)IPC_ISH_ISHTP_READY_BIT))
213 #define IPC_IS_ISH_ILUP(ish_status) \
214 (((ish_status) & IPC_ILUP_BIT) == ((uint32_t)IPC_ILUP_BIT))
217 #define IPC_PROTOCOL_ISHTP 1
218 #define IPC_PROTOCOL_MNG 3
220 #define MNG_RX_CMPL_ENABLE 0
221 #define MNG_RX_CMPL_DISABLE 1
222 #define MNG_RX_CMPL_INDICATION 2
223 #define MNG_RESET_NOTIFY 3
224 #define MNG_RESET_NOTIFY_ACK 4
225 #define MNG_SYNC_FW_CLOCK 5
226 #define MNG_ILLEGAL_CMD 0xFF
228 #endif /* _ISHTP_ISH_REGS_H_ */