x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / irqchip / irq-bcm2836.c
blobe7463e3c08143acae3e8cc5682f918c6a0b07ebd
1 /*
2 * Root interrupt controller for the BCM2836 (Raspberry Pi 2).
4 * Copyright 2015 Broadcom
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
17 #include <linux/cpu.h>
18 #include <linux/of_address.h>
19 #include <linux/of_irq.h>
20 #include <linux/irqchip.h>
21 #include <linux/irqdomain.h>
22 #include <asm/exception.h>
24 #define LOCAL_CONTROL 0x000
25 #define LOCAL_PRESCALER 0x008
28 * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
29 * next 2 bits identify the CPU that the GPU FIQ goes to.
31 #define LOCAL_GPU_ROUTING 0x00c
32 /* When setting bits 0-3, enables PMU interrupts on that CPU. */
33 #define LOCAL_PM_ROUTING_SET 0x010
34 /* When setting bits 0-3, disables PMU interrupts on that CPU. */
35 #define LOCAL_PM_ROUTING_CLR 0x014
37 * The low 4 bits of this are the CPU's timer IRQ enables, and the
38 * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
39 * bits).
41 #define LOCAL_TIMER_INT_CONTROL0 0x040
43 * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
44 * the next 4 bits are the CPU's per-mailbox FIQ enables (which
45 * override the IRQ bits).
47 #define LOCAL_MAILBOX_INT_CONTROL0 0x050
49 * The CPU's interrupt status register. Bits are defined by the the
50 * LOCAL_IRQ_* bits below.
52 #define LOCAL_IRQ_PENDING0 0x060
53 /* Same status bits as above, but for FIQ. */
54 #define LOCAL_FIQ_PENDING0 0x070
56 * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and
57 * these bits are organized by mailbox number and then CPU number. We
58 * use mailbox 0 for IPIs. The mailbox's interrupt is raised while
59 * any bit is set.
61 #define LOCAL_MAILBOX0_SET0 0x080
62 #define LOCAL_MAILBOX3_SET0 0x08c
63 /* Mailbox write-to-clear bits. */
64 #define LOCAL_MAILBOX0_CLR0 0x0c0
65 #define LOCAL_MAILBOX3_CLR0 0x0cc
67 #define LOCAL_IRQ_CNTPSIRQ 0
68 #define LOCAL_IRQ_CNTPNSIRQ 1
69 #define LOCAL_IRQ_CNTHPIRQ 2
70 #define LOCAL_IRQ_CNTVIRQ 3
71 #define LOCAL_IRQ_MAILBOX0 4
72 #define LOCAL_IRQ_MAILBOX1 5
73 #define LOCAL_IRQ_MAILBOX2 6
74 #define LOCAL_IRQ_MAILBOX3 7
75 #define LOCAL_IRQ_GPU_FAST 8
76 #define LOCAL_IRQ_PMU_FAST 9
77 #define LAST_IRQ LOCAL_IRQ_PMU_FAST
79 struct bcm2836_arm_irqchip_intc {
80 struct irq_domain *domain;
81 void __iomem *base;
84 static struct bcm2836_arm_irqchip_intc intc __read_mostly;
86 static void bcm2836_arm_irqchip_mask_per_cpu_irq(unsigned int reg_offset,
87 unsigned int bit,
88 int cpu)
90 void __iomem *reg = intc.base + reg_offset + 4 * cpu;
92 writel(readl(reg) & ~BIT(bit), reg);
95 static void bcm2836_arm_irqchip_unmask_per_cpu_irq(unsigned int reg_offset,
96 unsigned int bit,
97 int cpu)
99 void __iomem *reg = intc.base + reg_offset + 4 * cpu;
101 writel(readl(reg) | BIT(bit), reg);
104 static void bcm2836_arm_irqchip_mask_timer_irq(struct irq_data *d)
106 bcm2836_arm_irqchip_mask_per_cpu_irq(LOCAL_TIMER_INT_CONTROL0,
107 d->hwirq - LOCAL_IRQ_CNTPSIRQ,
108 smp_processor_id());
111 static void bcm2836_arm_irqchip_unmask_timer_irq(struct irq_data *d)
113 bcm2836_arm_irqchip_unmask_per_cpu_irq(LOCAL_TIMER_INT_CONTROL0,
114 d->hwirq - LOCAL_IRQ_CNTPSIRQ,
115 smp_processor_id());
118 static struct irq_chip bcm2836_arm_irqchip_timer = {
119 .name = "bcm2836-timer",
120 .irq_mask = bcm2836_arm_irqchip_mask_timer_irq,
121 .irq_unmask = bcm2836_arm_irqchip_unmask_timer_irq,
124 static void bcm2836_arm_irqchip_mask_pmu_irq(struct irq_data *d)
126 writel(1 << smp_processor_id(), intc.base + LOCAL_PM_ROUTING_CLR);
129 static void bcm2836_arm_irqchip_unmask_pmu_irq(struct irq_data *d)
131 writel(1 << smp_processor_id(), intc.base + LOCAL_PM_ROUTING_SET);
134 static struct irq_chip bcm2836_arm_irqchip_pmu = {
135 .name = "bcm2836-pmu",
136 .irq_mask = bcm2836_arm_irqchip_mask_pmu_irq,
137 .irq_unmask = bcm2836_arm_irqchip_unmask_pmu_irq,
140 static void bcm2836_arm_irqchip_mask_gpu_irq(struct irq_data *d)
144 static void bcm2836_arm_irqchip_unmask_gpu_irq(struct irq_data *d)
148 static struct irq_chip bcm2836_arm_irqchip_gpu = {
149 .name = "bcm2836-gpu",
150 .irq_mask = bcm2836_arm_irqchip_mask_gpu_irq,
151 .irq_unmask = bcm2836_arm_irqchip_unmask_gpu_irq,
154 static void bcm2836_arm_irqchip_register_irq(int hwirq, struct irq_chip *chip)
156 int irq = irq_create_mapping(intc.domain, hwirq);
158 irq_set_percpu_devid(irq);
159 irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq);
160 irq_set_status_flags(irq, IRQ_NOAUTOEN);
163 static void
164 __exception_irq_entry bcm2836_arm_irqchip_handle_irq(struct pt_regs *regs)
166 int cpu = smp_processor_id();
167 u32 stat;
169 stat = readl_relaxed(intc.base + LOCAL_IRQ_PENDING0 + 4 * cpu);
170 if (stat & BIT(LOCAL_IRQ_MAILBOX0)) {
171 #ifdef CONFIG_SMP
172 void __iomem *mailbox0 = (intc.base +
173 LOCAL_MAILBOX0_CLR0 + 16 * cpu);
174 u32 mbox_val = readl(mailbox0);
175 u32 ipi = ffs(mbox_val) - 1;
177 writel(1 << ipi, mailbox0);
178 handle_IPI(ipi, regs);
179 #endif
180 } else if (stat) {
181 u32 hwirq = ffs(stat) - 1;
183 handle_domain_irq(intc.domain, hwirq, regs);
187 #ifdef CONFIG_SMP
188 static void bcm2836_arm_irqchip_send_ipi(const struct cpumask *mask,
189 unsigned int ipi)
191 int cpu;
192 void __iomem *mailbox0_base = intc.base + LOCAL_MAILBOX0_SET0;
195 * Ensure that stores to normal memory are visible to the
196 * other CPUs before issuing the IPI.
198 smp_wmb();
200 for_each_cpu(cpu, mask) {
201 writel(1 << ipi, mailbox0_base + 16 * cpu);
205 static int bcm2836_cpu_starting(unsigned int cpu)
207 bcm2836_arm_irqchip_unmask_per_cpu_irq(LOCAL_MAILBOX_INT_CONTROL0, 0,
208 cpu);
209 return 0;
212 static int bcm2836_cpu_dying(unsigned int cpu)
214 bcm2836_arm_irqchip_mask_per_cpu_irq(LOCAL_MAILBOX_INT_CONTROL0, 0,
215 cpu);
216 return 0;
219 #ifdef CONFIG_ARM
220 static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
221 struct task_struct *idle)
223 unsigned long secondary_startup_phys =
224 (unsigned long)virt_to_phys((void *)secondary_startup);
226 writel(secondary_startup_phys,
227 intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
229 return 0;
232 static const struct smp_operations bcm2836_smp_ops __initconst = {
233 .smp_boot_secondary = bcm2836_smp_boot_secondary,
235 #endif
236 #endif
238 static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
239 .xlate = irq_domain_xlate_onecell
242 static void
243 bcm2836_arm_irqchip_smp_init(void)
245 #ifdef CONFIG_SMP
246 /* Unmask IPIs to the boot CPU. */
247 cpuhp_setup_state(CPUHP_AP_IRQ_BCM2836_STARTING,
248 "irqchip/bcm2836:starting", bcm2836_cpu_starting,
249 bcm2836_cpu_dying);
251 set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
253 #ifdef CONFIG_ARM
254 smp_set_ops(&bcm2836_smp_ops);
255 #endif
256 #endif
260 * The LOCAL_IRQ_CNT* timer firings are based off of the external
261 * oscillator with some scaling. The firmware sets up CNTFRQ to
262 * report 19.2Mhz, but doesn't set up the scaling registers.
264 static void bcm2835_init_local_timer_frequency(void)
267 * Set the timer to source from the 19.2Mhz crystal clock (bit
268 * 8 unset), and only increment by 1 instead of 2 (bit 9
269 * unset).
271 writel(0, intc.base + LOCAL_CONTROL);
274 * Set the timer prescaler to 1:1 (timer freq = input freq *
275 * 2**31 / prescaler)
277 writel(0x80000000, intc.base + LOCAL_PRESCALER);
280 static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
281 struct device_node *parent)
283 intc.base = of_iomap(node, 0);
284 if (!intc.base) {
285 panic("%s: unable to map local interrupt registers\n",
286 node->full_name);
289 bcm2835_init_local_timer_frequency();
291 intc.domain = irq_domain_add_linear(node, LAST_IRQ + 1,
292 &bcm2836_arm_irqchip_intc_ops,
293 NULL);
294 if (!intc.domain)
295 panic("%s: unable to create IRQ domain\n", node->full_name);
297 bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPSIRQ,
298 &bcm2836_arm_irqchip_timer);
299 bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPNSIRQ,
300 &bcm2836_arm_irqchip_timer);
301 bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTHPIRQ,
302 &bcm2836_arm_irqchip_timer);
303 bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTVIRQ,
304 &bcm2836_arm_irqchip_timer);
305 bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_GPU_FAST,
306 &bcm2836_arm_irqchip_gpu);
307 bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_PMU_FAST,
308 &bcm2836_arm_irqchip_pmu);
310 bcm2836_arm_irqchip_smp_init();
312 set_handle_irq(bcm2836_arm_irqchip_handle_irq);
313 return 0;
316 IRQCHIP_DECLARE(bcm2836_arm_irqchip_l1_intc, "brcm,bcm2836-l1-intc",
317 bcm2836_arm_irqchip_l1_intc_of_init);