x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / media / rc / ir-rx51.c
blob49265f02e772b471b9c3bbb7b49af03bc2dc21d1
1 /*
2 * Copyright (C) 2008 Nokia Corporation
4 * Based on lirc_serial.c
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 #include <linux/clk.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/wait.h>
20 #include <linux/pwm.h>
21 #include <linux/of.h>
22 #include <linux/hrtimer.h>
24 #include <media/rc-core.h>
25 #include <linux/platform_data/media/ir-rx51.h>
27 #define WBUF_LEN 256
29 struct ir_rx51 {
30 struct rc_dev *rcdev;
31 struct pwm_device *pwm;
32 struct hrtimer timer;
33 struct device *dev;
34 struct ir_rx51_platform_data *pdata;
35 wait_queue_head_t wqueue;
37 unsigned int freq; /* carrier frequency */
38 unsigned int duty_cycle; /* carrier duty cycle */
39 int wbuf[WBUF_LEN];
40 int wbuf_index;
41 unsigned long device_is_open;
44 static inline void ir_rx51_on(struct ir_rx51 *ir_rx51)
46 pwm_enable(ir_rx51->pwm);
49 static inline void ir_rx51_off(struct ir_rx51 *ir_rx51)
51 pwm_disable(ir_rx51->pwm);
54 static int init_timing_params(struct ir_rx51 *ir_rx51)
56 struct pwm_device *pwm = ir_rx51->pwm;
57 int duty, period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, ir_rx51->freq);
59 duty = DIV_ROUND_CLOSEST(ir_rx51->duty_cycle * period, 100);
61 pwm_config(pwm, duty, period);
63 return 0;
66 static enum hrtimer_restart ir_rx51_timer_cb(struct hrtimer *timer)
68 struct ir_rx51 *ir_rx51 = container_of(timer, struct ir_rx51, timer);
69 ktime_t now;
71 if (ir_rx51->wbuf_index < 0) {
72 dev_err_ratelimited(ir_rx51->dev,
73 "BUG wbuf_index has value of %i\n",
74 ir_rx51->wbuf_index);
75 goto end;
79 * If we happen to hit an odd latency spike, loop through the
80 * pulses until we catch up.
82 do {
83 u64 ns;
85 if (ir_rx51->wbuf_index >= WBUF_LEN)
86 goto end;
87 if (ir_rx51->wbuf[ir_rx51->wbuf_index] == -1)
88 goto end;
90 if (ir_rx51->wbuf_index % 2)
91 ir_rx51_off(ir_rx51);
92 else
93 ir_rx51_on(ir_rx51);
95 ns = US_TO_NS(ir_rx51->wbuf[ir_rx51->wbuf_index]);
96 hrtimer_add_expires_ns(timer, ns);
98 ir_rx51->wbuf_index++;
100 now = timer->base->get_time();
102 } while (hrtimer_get_expires_tv64(timer) < now);
104 return HRTIMER_RESTART;
105 end:
106 /* Stop TX here */
107 ir_rx51_off(ir_rx51);
108 ir_rx51->wbuf_index = -1;
110 wake_up_interruptible(&ir_rx51->wqueue);
112 return HRTIMER_NORESTART;
115 static int ir_rx51_tx(struct rc_dev *dev, unsigned int *buffer,
116 unsigned int count)
118 struct ir_rx51 *ir_rx51 = dev->priv;
120 if (count > WBUF_LEN)
121 return -EINVAL;
123 memcpy(ir_rx51->wbuf, buffer, count * sizeof(unsigned int));
125 /* Wait any pending transfers to finish */
126 wait_event_interruptible(ir_rx51->wqueue, ir_rx51->wbuf_index < 0);
128 init_timing_params(ir_rx51);
129 if (count < WBUF_LEN)
130 ir_rx51->wbuf[count] = -1; /* Insert termination mark */
133 * Adjust latency requirements so the device doesn't go in too
134 * deep sleep states
136 ir_rx51->pdata->set_max_mpu_wakeup_lat(ir_rx51->dev, 50);
138 ir_rx51_on(ir_rx51);
139 ir_rx51->wbuf_index = 1;
140 hrtimer_start(&ir_rx51->timer,
141 ns_to_ktime(US_TO_NS(ir_rx51->wbuf[0])),
142 HRTIMER_MODE_REL);
144 * Don't return back to the userspace until the transfer has
145 * finished
147 wait_event_interruptible(ir_rx51->wqueue, ir_rx51->wbuf_index < 0);
149 /* We can sleep again */
150 ir_rx51->pdata->set_max_mpu_wakeup_lat(ir_rx51->dev, -1);
152 return count;
155 static int ir_rx51_open(struct rc_dev *dev)
157 struct ir_rx51 *ir_rx51 = dev->priv;
159 if (test_and_set_bit(1, &ir_rx51->device_is_open))
160 return -EBUSY;
162 ir_rx51->pwm = pwm_get(ir_rx51->dev, NULL);
163 if (IS_ERR(ir_rx51->pwm)) {
164 int res = PTR_ERR(ir_rx51->pwm);
166 dev_err(ir_rx51->dev, "pwm_get failed: %d\n", res);
167 return res;
170 return 0;
173 static void ir_rx51_release(struct rc_dev *dev)
175 struct ir_rx51 *ir_rx51 = dev->priv;
177 hrtimer_cancel(&ir_rx51->timer);
178 ir_rx51_off(ir_rx51);
179 pwm_put(ir_rx51->pwm);
181 clear_bit(1, &ir_rx51->device_is_open);
184 static struct ir_rx51 ir_rx51 = {
185 .duty_cycle = 50,
186 .wbuf_index = -1,
189 static int ir_rx51_set_duty_cycle(struct rc_dev *dev, u32 duty)
191 struct ir_rx51 *ir_rx51 = dev->priv;
193 ir_rx51->duty_cycle = duty;
195 return 0;
198 static int ir_rx51_set_tx_carrier(struct rc_dev *dev, u32 carrier)
200 struct ir_rx51 *ir_rx51 = dev->priv;
202 if (carrier > 500000 || carrier < 20000)
203 return -EINVAL;
205 ir_rx51->freq = carrier;
207 return 0;
210 #ifdef CONFIG_PM
212 static int ir_rx51_suspend(struct platform_device *dev, pm_message_t state)
215 * In case the device is still open, do not suspend. Normally
216 * this should not be a problem as lircd only keeps the device
217 * open only for short periods of time. We also don't want to
218 * get involved with race conditions that might happen if we
219 * were in a middle of a transmit. Thus, we defer any suspend
220 * actions until transmit has completed.
222 if (test_and_set_bit(1, &ir_rx51.device_is_open))
223 return -EAGAIN;
225 clear_bit(1, &ir_rx51.device_is_open);
227 return 0;
230 static int ir_rx51_resume(struct platform_device *dev)
232 return 0;
235 #else
237 #define ir_rx51_suspend NULL
238 #define ir_rx51_resume NULL
240 #endif /* CONFIG_PM */
242 static int ir_rx51_probe(struct platform_device *dev)
244 struct pwm_device *pwm;
245 struct rc_dev *rcdev;
247 ir_rx51.pdata = dev->dev.platform_data;
249 if (!ir_rx51.pdata) {
250 dev_err(&dev->dev, "Platform Data is missing\n");
251 return -ENXIO;
254 pwm = pwm_get(&dev->dev, NULL);
255 if (IS_ERR(pwm)) {
256 int err = PTR_ERR(pwm);
258 if (err != -EPROBE_DEFER)
259 dev_err(&dev->dev, "pwm_get failed: %d\n", err);
260 return err;
263 /* Use default, in case userspace does not set the carrier */
264 ir_rx51.freq = DIV_ROUND_CLOSEST(pwm_get_period(pwm), NSEC_PER_SEC);
265 pwm_put(pwm);
267 hrtimer_init(&ir_rx51.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
268 ir_rx51.timer.function = ir_rx51_timer_cb;
270 ir_rx51.dev = &dev->dev;
272 rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW_TX);
273 if (!rcdev)
274 return -ENOMEM;
276 rcdev->priv = &ir_rx51;
277 rcdev->open = ir_rx51_open;
278 rcdev->close = ir_rx51_release;
279 rcdev->tx_ir = ir_rx51_tx;
280 rcdev->s_tx_duty_cycle = ir_rx51_set_duty_cycle;
281 rcdev->s_tx_carrier = ir_rx51_set_tx_carrier;
282 rcdev->driver_name = KBUILD_MODNAME;
284 ir_rx51.rcdev = rcdev;
286 return devm_rc_register_device(&dev->dev, ir_rx51.rcdev);
289 static int ir_rx51_remove(struct platform_device *dev)
291 return 0;
294 static const struct of_device_id ir_rx51_match[] = {
296 .compatible = "nokia,n900-ir",
300 MODULE_DEVICE_TABLE(of, ir_rx51_match);
302 static struct platform_driver ir_rx51_platform_driver = {
303 .probe = ir_rx51_probe,
304 .remove = ir_rx51_remove,
305 .suspend = ir_rx51_suspend,
306 .resume = ir_rx51_resume,
307 .driver = {
308 .name = KBUILD_MODNAME,
309 .of_match_table = of_match_ptr(ir_rx51_match),
312 module_platform_driver(ir_rx51_platform_driver);
314 MODULE_DESCRIPTION("IR TX driver for Nokia RX51");
315 MODULE_AUTHOR("Nokia Corporation");
316 MODULE_LICENSE("GPL");