?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / mmc / core / sdio_uart.c
blobd3c91f412b693d80666d6c8bf19ae7d27fe231f4
1 /*
2 * SDIO UART/GPS driver
3 *
4 * Based on drivers/serial/8250.c and drivers/serial/serial_core.c
5 * by Russell King.
6 *
7 * Author: Nicolas Pitre
8 * Created: June 15, 2007
9 * Copyright: MontaVista Software, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
15 */
16
17 /*
18 * Note: Although this driver assumes a 16550A-like UART implementation,
19 * it is not possible to leverage the common 8250/16550 driver, nor the
20 * core UART infrastructure, as they assumes direct access to the hardware
21 * registers, often under a spinlock. This is not possible in the SDIO
22 * context as SDIO access functions must be able to sleep.
23 *
24 * Because we need to lock the SDIO host to ensure an exclusive access to
25 * the card, we simply rely on that lock to also prevent and serialize
26 * concurrent access to the same port.
27 */
28
29 #include <linux/module.h>
30 #include <linux/init.h>
31 #include <linux/kernel.h>
32 #include <linux/sched.h>
33 #include <linux/mutex.h>
34 #include <linux/seq_file.h>
35 #include <linux/serial_reg.h>
36 #include <linux/circ_buf.h>
37 #include <linux/tty.h>
38 #include <linux/tty_flip.h>
39 #include <linux/kfifo.h>
40 #include <linux/slab.h>
41
42 #include <linux/mmc/core.h>
43 #include <linux/mmc/card.h>
44 #include <linux/mmc/sdio_func.h>
45 #include <linux/mmc/sdio_ids.h>
46
47
48 #define UART_NR 8 /* Number of UARTs this driver can handle */
49
50
51 #define FIFO_SIZE PAGE_SIZE
52 #define WAKEUP_CHARS 256
53
54 struct uart_icount {
55 __u32 cts;
56 __u32 dsr;
57 __u32 rng;
58 __u32 dcd;
59 __u32 rx;
60 __u32 tx;
61 __u32 frame;
62 __u32 overrun;
63 __u32 parity;
64 __u32 brk;
65 };
66
67 struct sdio_uart_port {
68 struct tty_port port;
69 unsigned int index;
70 struct sdio_func *func;
71 struct mutex func_lock;
72 struct task_struct *in_sdio_uart_irq;
73 unsigned int regs_offset;
74 struct kfifo xmit_fifo;
75 spinlock_t write_lock;
76 struct uart_icount icount;
77 unsigned int uartclk;
78 unsigned int mctrl;
79 unsigned int rx_mctrl;
80 unsigned int read_status_mask;
81 unsigned int ignore_status_mask;
82 unsigned char x_char;
83 unsigned char ier;
84 unsigned char lcr;
85 };
86
87 static struct sdio_uart_port *sdio_uart_table[UART_NR];
88 static DEFINE_SPINLOCK(sdio_uart_table_lock);
89
90 static int sdio_uart_add_port(struct sdio_uart_port *port)
91 {
92 int index, ret = -EBUSY;
93
94 mutex_init(&port->func_lock);
95 spin_lock_init(&port->write_lock);
96 if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL))
97 return -ENOMEM;
98
99 spin_lock(&sdio_uart_table_lock);
100 for (index = 0; index < UART_NR; index++) {
101 if (!sdio_uart_table[index]) {
102 port->index = index;
103 sdio_uart_table[index] = port;
104 ret = 0;
105 break;
106 }
107 }
108 spin_unlock(&sdio_uart_table_lock);
109
110 return ret;
111 }
112
113 static struct sdio_uart_port *sdio_uart_port_get(unsigned index)
114 {
115 struct sdio_uart_port *port;
116
117 if (index >= UART_NR)
118 return NULL;
119
120 spin_lock(&sdio_uart_table_lock);
121 port = sdio_uart_table[index];
122 if (port)
123 tty_port_get(&port->port);
124 spin_unlock(&sdio_uart_table_lock);
125
126 return port;
127 }
128
129 static void sdio_uart_port_put(struct sdio_uart_port *port)
130 {
131 tty_port_put(&port->port);
132 }
133
134 static void sdio_uart_port_remove(struct sdio_uart_port *port)
135 {
136 struct sdio_func *func;
137
138 spin_lock(&sdio_uart_table_lock);
139 sdio_uart_table[port->index] = NULL;
140 spin_unlock(&sdio_uart_table_lock);
141
142 /*
143 * We're killing a port that potentially still is in use by
144 * the tty layer. Be careful to prevent any further access
145 * to the SDIO function and arrange for the tty layer to
146 * give up on that port ASAP.
147 * Beware: the lock ordering is critical.
148 */
149 mutex_lock(&port->port.mutex);
150 mutex_lock(&port->func_lock);
151 func = port->func;
152 sdio_claim_host(func);
153 port->func = NULL;
154 mutex_unlock(&port->func_lock);
155 /* tty_hangup is async so is this safe as is ?? */
156 tty_port_tty_hangup(&port->port, false);
157 mutex_unlock(&port->port.mutex);
158 sdio_release_irq(func);
159 sdio_disable_func(func);
160 sdio_release_host(func);
161
162 sdio_uart_port_put(port);
163 }
164
165 static int sdio_uart_claim_func(struct sdio_uart_port *port)
166 {
167 mutex_lock(&port->func_lock);
168 if (unlikely(!port->func)) {
169 mutex_unlock(&port->func_lock);
170 return -ENODEV;
171 }
172 if (likely(port->in_sdio_uart_irq != current))
173 sdio_claim_host(port->func);
174 mutex_unlock(&port->func_lock);
175 return 0;
176 }
177
178 static inline void sdio_uart_release_func(struct sdio_uart_port *port)
179 {
180 if (likely(port->in_sdio_uart_irq != current))
181 sdio_release_host(port->func);
182 }
183
184 static inline unsigned int sdio_in(struct sdio_uart_port *port, int offset)
185 {
186 unsigned char c;
187 c = sdio_readb(port->func, port->regs_offset + offset, NULL);
188 return c;
189 }
190
191 static inline void sdio_out(struct sdio_uart_port *port, int offset, int value)
192 {
193 sdio_writeb(port->func, value, port->regs_offset + offset, NULL);
194 }
195
196 static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)
197 {
198 unsigned char status;
199 unsigned int ret;
200
201 /* FIXME: What stops this losing the delta bits and breaking
202 sdio_uart_check_modem_status ? */
203 status = sdio_in(port, UART_MSR);
204
205 ret = 0;
206 if (status & UART_MSR_DCD)
207 ret |= TIOCM_CAR;
208 if (status & UART_MSR_RI)
209 ret |= TIOCM_RNG;
210 if (status & UART_MSR_DSR)
211 ret |= TIOCM_DSR;
212 if (status & UART_MSR_CTS)
213 ret |= TIOCM_CTS;
214 return ret;
215 }
216
217 static void sdio_uart_write_mctrl(struct sdio_uart_port *port,
218 unsigned int mctrl)
219 {
220 unsigned char mcr = 0;
221
222 if (mctrl & TIOCM_RTS)
223 mcr |= UART_MCR_RTS;
224 if (mctrl & TIOCM_DTR)
225 mcr |= UART_MCR_DTR;
226 if (mctrl & TIOCM_OUT1)
227 mcr |= UART_MCR_OUT1;
228 if (mctrl & TIOCM_OUT2)
229 mcr |= UART_MCR_OUT2;
230 if (mctrl & TIOCM_LOOP)
231 mcr |= UART_MCR_LOOP;
232
233 sdio_out(port, UART_MCR, mcr);
234 }
235
236 static inline void sdio_uart_update_mctrl(struct sdio_uart_port *port,
237 unsigned int set, unsigned int clear)
238 {
239 unsigned int old;
240
241 old = port->mctrl;
242 port->mctrl = (old & ~clear) | set;
243 if (old != port->mctrl)
244 sdio_uart_write_mctrl(port, port->mctrl);
245 }
246
247 #define sdio_uart_set_mctrl(port, x) sdio_uart_update_mctrl(port, x, 0)
248 #define sdio_uart_clear_mctrl(port, x) sdio_uart_update_mctrl(port, 0, x)
249
250 static void sdio_uart_change_speed(struct sdio_uart_port *port,
251 struct ktermios *termios,
252 struct ktermios *old)
253 {
254 unsigned char cval, fcr = 0;
255 unsigned int baud, quot;
256
257 switch (termios->c_cflag & CSIZE) {
258 case CS5:
259 cval = UART_LCR_WLEN5;
260 break;
261 case CS6:
262 cval = UART_LCR_WLEN6;
263 break;
264 case CS7:
265 cval = UART_LCR_WLEN7;
266 break;
267 default:
268 case CS8:
269 cval = UART_LCR_WLEN8;
270 break;
271 }
272
273 if (termios->c_cflag & CSTOPB)
274 cval |= UART_LCR_STOP;
275 if (termios->c_cflag & PARENB)
276 cval |= UART_LCR_PARITY;
277 if (!(termios->c_cflag & PARODD))
278 cval |= UART_LCR_EPAR;
279
280 for (;;) {
281 baud = tty_termios_baud_rate(termios);
282 if (baud == 0)
283 baud = 9600; /* Special case: B0 rate. */
284 if (baud <= port->uartclk)
285 break;
286 /*
287 * Oops, the quotient was zero. Try again with the old
288 * baud rate if possible, otherwise default to 9600.
289 */
290 termios->c_cflag &= ~CBAUD;
291 if (old) {
292 termios->c_cflag |= old->c_cflag & CBAUD;
293 old = NULL;
294 } else
295 termios->c_cflag |= B9600;
296 }
297 quot = (2 * port->uartclk + baud) / (2 * baud);
298
299 if (baud < 2400)
300 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
301 else
302 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10;
303
304 port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
305 if (termios->c_iflag & INPCK)
306 port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
307 if (termios->c_iflag & (BRKINT | PARMRK))
308 port->read_status_mask |= UART_LSR_BI;
309
310 /*
311 * Characters to ignore
312 */
313 port->ignore_status_mask = 0;
314 if (termios->c_iflag & IGNPAR)
315 port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
316 if (termios->c_iflag & IGNBRK) {
317 port->ignore_status_mask |= UART_LSR_BI;
318 /*
319 * If we're ignoring parity and break indicators,
320 * ignore overruns too (for real raw support).
321 */
322 if (termios->c_iflag & IGNPAR)
323 port->ignore_status_mask |= UART_LSR_OE;
324 }
325
326 /*
327 * ignore all characters if CREAD is not set
328 */
329 if ((termios->c_cflag & CREAD) == 0)
330 port->ignore_status_mask |= UART_LSR_DR;
331
332 /*
333 * CTS flow control flag and modem status interrupts
334 */
335 port->ier &= ~UART_IER_MSI;
336 if ((termios->c_cflag & CRTSCTS) || !(termios->c_cflag & CLOCAL))
337 port->ier |= UART_IER_MSI;
338
339 port->lcr = cval;
340
341 sdio_out(port, UART_IER, port->ier);
342 sdio_out(port, UART_LCR, cval | UART_LCR_DLAB);
343 sdio_out(port, UART_DLL, quot & 0xff);
344 sdio_out(port, UART_DLM, quot >> 8);
345 sdio_out(port, UART_LCR, cval);
346 sdio_out(port, UART_FCR, fcr);
347
348 sdio_uart_write_mctrl(port, port->mctrl);
349 }
350
351 static void sdio_uart_start_tx(struct sdio_uart_port *port)
352 {
353 if (!(port->ier & UART_IER_THRI)) {
354 port->ier |= UART_IER_THRI;
355 sdio_out(port, UART_IER, port->ier);
356 }
357 }
358
359 static void sdio_uart_stop_tx(struct sdio_uart_port *port)
360 {
361 if (port->ier & UART_IER_THRI) {
362 port->ier &= ~UART_IER_THRI;
363 sdio_out(port, UART_IER, port->ier);
364 }
365 }
366
367 static void sdio_uart_stop_rx(struct sdio_uart_port *port)
368 {
369 port->ier &= ~UART_IER_RLSI;
370 port->read_status_mask &= ~UART_LSR_DR;
371 sdio_out(port, UART_IER, port->ier);
372 }
373
374 static void sdio_uart_receive_chars(struct sdio_uart_port *port,
375 unsigned int *status)
376 {
377 unsigned int ch, flag;
378 int max_count = 256;
379
380 do {
381 ch = sdio_in(port, UART_RX);
382 flag = TTY_NORMAL;
383 port->icount.rx++;
384
385 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
386 UART_LSR_FE | UART_LSR_OE))) {
387 /*
388 * For statistics only
389 */
390 if (*status & UART_LSR_BI) {
391 *status &= ~(UART_LSR_FE | UART_LSR_PE);
392 port->icount.brk++;
393 } else if (*status & UART_LSR_PE)
394 port->icount.parity++;
395 else if (*status & UART_LSR_FE)
396 port->icount.frame++;
397 if (*status & UART_LSR_OE)
398 port->icount.overrun++;
399
400 /*
401 * Mask off conditions which should be ignored.
402 */
403 *status &= port->read_status_mask;
404 if (*status & UART_LSR_BI)
405 flag = TTY_BREAK;
406 else if (*status & UART_LSR_PE)
407 flag = TTY_PARITY;
408 else if (*status & UART_LSR_FE)
409 flag = TTY_FRAME;
410 }
411
412 if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0)
413 tty_insert_flip_char(&port->port, ch, flag);
414
415 /*
416 * Overrun is special. Since it's reported immediately,
417 * it doesn't affect the current character.
418 */
419 if (*status & ~port->ignore_status_mask & UART_LSR_OE)
420 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
421
422 *status = sdio_in(port, UART_LSR);
423 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
424
425 tty_flip_buffer_push(&port->port);
426 }
427
428 static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
429 {
430 struct kfifo *xmit = &port->xmit_fifo;
431 int count;
432 struct tty_struct *tty;
433 u8 iobuf[16];
434 int len;
435
436 if (port->x_char) {
437 sdio_out(port, UART_TX, port->x_char);
438 port->icount.tx++;
439 port->x_char = 0;
440 return;
441 }
442
443 tty = tty_port_tty_get(&port->port);
444
445 if (tty == NULL || !kfifo_len(xmit) ||
446 tty->stopped || tty->hw_stopped) {
447 sdio_uart_stop_tx(port);
448 tty_kref_put(tty);
449 return;
450 }
451
452 len = kfifo_out_locked(xmit, iobuf, 16, &port->write_lock);
453 for (count = 0; count < len; count++) {
454 sdio_out(port, UART_TX, iobuf[count]);
455 port->icount.tx++;
456 }
457
458 len = kfifo_len(xmit);
459 if (len < WAKEUP_CHARS) {
460 tty_wakeup(tty);
461 if (len == 0)
462 sdio_uart_stop_tx(port);
463 }
464 tty_kref_put(tty);
465 }
466
467 static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
468 {
469 int status;
470 struct tty_struct *tty;
471
472 status = sdio_in(port, UART_MSR);
473
474 if ((status & UART_MSR_ANY_DELTA) == 0)
475 return;
476
477 if (status & UART_MSR_TERI)
478 port->icount.rng++;
479 if (status & UART_MSR_DDSR)
480 port->icount.dsr++;
481 if (status & UART_MSR_DDCD) {
482 port->icount.dcd++;
483 /* DCD raise - wake for open */
484 if (status & UART_MSR_DCD)
485 wake_up_interruptible(&port->port.open_wait);
486 else {
487 /* DCD drop - hang up if tty attached */
488 tty_port_tty_hangup(&port->port, false);
489 }
490 }
491 if (status & UART_MSR_DCTS) {
492 port->icount.cts++;
493 tty = tty_port_tty_get(&port->port);
494 if (tty && C_CRTSCTS(tty)) {
495 int cts = (status & UART_MSR_CTS);
496 if (tty->hw_stopped) {
497 if (cts) {
498 tty->hw_stopped = 0;
499 sdio_uart_start_tx(port);
500 tty_wakeup(tty);
501 }
502 } else {
503 if (!cts) {
504 tty->hw_stopped = 1;
505 sdio_uart_stop_tx(port);
506 }
507 }
508 }
509 tty_kref_put(tty);
510 }
511 }
512
513 /*
514 * This handles the interrupt from one port.
515 */
516 static void sdio_uart_irq(struct sdio_func *func)
517 {
518 struct sdio_uart_port *port = sdio_get_drvdata(func);
519 unsigned int iir, lsr;
520
521 /*
522 * In a few places sdio_uart_irq() is called directly instead of
523 * waiting for the actual interrupt to be raised and the SDIO IRQ
524 * thread scheduled in order to reduce latency. However, some
525 * interaction with the tty core may end up calling us back
526 * (serial echo, flow control, etc.) through those same places
527 * causing undesirable effects. Let's stop the recursion here.
528 */
529 if (unlikely(port->in_sdio_uart_irq == current))
530 return;
531
532 iir = sdio_in(port, UART_IIR);
533 if (iir & UART_IIR_NO_INT)
534 return;
535
536 port->in_sdio_uart_irq = current;
537 lsr = sdio_in(port, UART_LSR);
538 if (lsr & UART_LSR_DR)
539 sdio_uart_receive_chars(port, &lsr);
540 sdio_uart_check_modem_status(port);
541 if (lsr & UART_LSR_THRE)
542 sdio_uart_transmit_chars(port);
543 port->in_sdio_uart_irq = NULL;
544 }
545
546 static int uart_carrier_raised(struct tty_port *tport)
547 {
548 struct sdio_uart_port *port =
549 container_of(tport, struct sdio_uart_port, port);
550 unsigned int ret = sdio_uart_claim_func(port);
551 if (ret) /* Missing hardware shouldn't block for carrier */
552 return 1;
553 ret = sdio_uart_get_mctrl(port);
554 sdio_uart_release_func(port);
555 if (ret & TIOCM_CAR)
556 return 1;
557 return 0;
558 }
559
560 /**
561 * uart_dtr_rts - port helper to set uart signals
562 * @tport: tty port to be updated
563 * @onoff: set to turn on DTR/RTS
564 *
565 * Called by the tty port helpers when the modem signals need to be
566 * adjusted during an open, close and hangup.
567 */
568
569 static void uart_dtr_rts(struct tty_port *tport, int onoff)
570 {
571 struct sdio_uart_port *port =
572 container_of(tport, struct sdio_uart_port, port);
573 int ret = sdio_uart_claim_func(port);
574 if (ret)
575 return;
576 if (onoff == 0)
577 sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
578 else
579 sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
580 sdio_uart_release_func(port);
581 }
582
583 /**
584 * sdio_uart_activate - start up hardware
585 * @tport: tty port to activate
586 * @tty: tty bound to this port
587 *
588 * Activate a tty port. The port locking guarantees us this will be
589 * run exactly once per set of opens, and if successful will see the
590 * shutdown method run exactly once to match. Start up and shutdown are
591 * protected from each other by the internal locking and will not run
592 * at the same time even during a hangup event.
593 *
594 * If we successfully start up the port we take an extra kref as we
595 * will keep it around until shutdown when the kref is dropped.
596 */
597
598 static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
599 {
600 struct sdio_uart_port *port =
601 container_of(tport, struct sdio_uart_port, port);
602 int ret;
603
604 /*
605 * Set the TTY IO error marker - we will only clear this
606 * once we have successfully opened the port.
607 */
608 set_bit(TTY_IO_ERROR, &tty->flags);
609
610 kfifo_reset(&port->xmit_fifo);
611
612 ret = sdio_uart_claim_func(port);
613 if (ret)
614 return ret;
615 ret = sdio_enable_func(port->func);
616 if (ret)
617 goto err1;
618 ret = sdio_claim_irq(port->func, sdio_uart_irq);
619 if (ret)
620 goto err2;
621
622 /*
623 * Clear the FIFO buffers and disable them.
624 * (they will be reenabled in sdio_change_speed())
625 */
626 sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
627 sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
628 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
629 sdio_out(port, UART_FCR, 0);
630
631 /*
632 * Clear the interrupt registers.
633 */
634 (void) sdio_in(port, UART_LSR);
635 (void) sdio_in(port, UART_RX);
636 (void) sdio_in(port, UART_IIR);
637 (void) sdio_in(port, UART_MSR);
638
639 /*
640 * Now, initialize the UART
641 */
642 sdio_out(port, UART_LCR, UART_LCR_WLEN8);
643
644 port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
645 port->mctrl = TIOCM_OUT2;
646
647 sdio_uart_change_speed(port, &tty->termios, NULL);
648
649 if (C_BAUD(tty))
650 sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
651
652 if (C_CRTSCTS(tty))
653 if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
654 tty->hw_stopped = 1;
655
656 clear_bit(TTY_IO_ERROR, &tty->flags);
657
658 /* Kick the IRQ handler once while we're still holding the host lock */
659 sdio_uart_irq(port->func);
660
661 sdio_uart_release_func(port);
662 return 0;
663
664 err2:
665 sdio_disable_func(port->func);
666 err1:
667 sdio_uart_release_func(port);
668 return ret;
669 }
670
671 /**
672 * sdio_uart_shutdown - stop hardware
673 * @tport: tty port to shut down
674 *
675 * Deactivate a tty port. The port locking guarantees us this will be
676 * run only if a successful matching activate already ran. The two are
677 * protected from each other by the internal locking and will not run
678 * at the same time even during a hangup event.
679 */
680
681 static void sdio_uart_shutdown(struct tty_port *tport)
682 {
683 struct sdio_uart_port *port =
684 container_of(tport, struct sdio_uart_port, port);
685 int ret;
686
687 ret = sdio_uart_claim_func(port);
688 if (ret)
689 return;
690
691 sdio_uart_stop_rx(port);
692
693 /* Disable interrupts from this port */
694 sdio_release_irq(port->func);
695 port->ier = 0;
696 sdio_out(port, UART_IER, 0);
697
698 sdio_uart_clear_mctrl(port, TIOCM_OUT2);
699
700 /* Disable break condition and FIFOs. */
701 port->lcr &= ~UART_LCR_SBC;
702 sdio_out(port, UART_LCR, port->lcr);
703 sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
704 UART_FCR_CLEAR_RCVR |
705 UART_FCR_CLEAR_XMIT);
706 sdio_out(port, UART_FCR, 0);
707
708 sdio_disable_func(port->func);
709
710 sdio_uart_release_func(port);
711 }
712
713 static void sdio_uart_port_destroy(struct tty_port *tport)
714 {
715 struct sdio_uart_port *port =
716 container_of(tport, struct sdio_uart_port, port);
717 kfifo_free(&port->xmit_fifo);
718 kfree(port);
719 }
720
721 /**
722 * sdio_uart_install - install method
723 * @driver: the driver in use (sdio_uart in our case)
724 * @tty: the tty being bound
725 *
726 * Look up and bind the tty and the driver together. Initialize
727 * any needed private data (in our case the termios)
728 */
729
730 static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty)
731 {
732 int idx = tty->index;
733 struct sdio_uart_port *port = sdio_uart_port_get(idx);
734 int ret = tty_standard_install(driver, tty);
735
736 if (ret == 0)
737 /* This is the ref sdio_uart_port get provided */
738 tty->driver_data = port;
739 else
740 sdio_uart_port_put(port);
741 return ret;
742 }
743
744 /**
745 * sdio_uart_cleanup - called on the last tty kref drop
746 * @tty: the tty being destroyed
747 *
748 * Called asynchronously when the last reference to the tty is dropped.
749 * We cannot destroy the tty->driver_data port kref until this point
750 */
751
752 static void sdio_uart_cleanup(struct tty_struct *tty)
753 {
754 struct sdio_uart_port *port = tty->driver_data;
755 tty->driver_data = NULL; /* Bug trap */
756 sdio_uart_port_put(port);
757 }
758
759 /*
760 * Open/close/hangup is now entirely boilerplate
761 */
762
763 static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
764 {
765 struct sdio_uart_port *port = tty->driver_data;
766 return tty_port_open(&port->port, tty, filp);
767 }
768
769 static void sdio_uart_close(struct tty_struct *tty, struct file * filp)
770 {
771 struct sdio_uart_port *port = tty->driver_data;
772 tty_port_close(&port->port, tty, filp);
773 }
774
775 static void sdio_uart_hangup(struct tty_struct *tty)
776 {
777 struct sdio_uart_port *port = tty->driver_data;
778 tty_port_hangup(&port->port);
779 }
780
781 static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf,
782 int count)
783 {
784 struct sdio_uart_port *port = tty->driver_data;
785 int ret;
786
787 if (!port->func)
788 return -ENODEV;
789
790 ret = kfifo_in_locked(&port->xmit_fifo, buf, count, &port->write_lock);
791 if (!(port->ier & UART_IER_THRI)) {
792 int err = sdio_uart_claim_func(port);
793 if (!err) {
794 sdio_uart_start_tx(port);
795 sdio_uart_irq(port->func);
796 sdio_uart_release_func(port);
797 } else
798 ret = err;
799 }
800
801 return ret;
802 }
803
804 static int sdio_uart_write_room(struct tty_struct *tty)
805 {
806 struct sdio_uart_port *port = tty->driver_data;
807 return FIFO_SIZE - kfifo_len(&port->xmit_fifo);
808 }
809
810 static int sdio_uart_chars_in_buffer(struct tty_struct *tty)
811 {
812 struct sdio_uart_port *port = tty->driver_data;
813 return kfifo_len(&port->xmit_fifo);
814 }
815
816 static void sdio_uart_send_xchar(struct tty_struct *tty, char ch)
817 {
818 struct sdio_uart_port *port = tty->driver_data;
819
820 port->x_char = ch;
821 if (ch && !(port->ier & UART_IER_THRI)) {
822 if (sdio_uart_claim_func(port) != 0)
823 return;
824 sdio_uart_start_tx(port);
825 sdio_uart_irq(port->func);
826 sdio_uart_release_func(port);
827 }
828 }
829
830 static void sdio_uart_throttle(struct tty_struct *tty)
831 {
832 struct sdio_uart_port *port = tty->driver_data;
833
834 if (!I_IXOFF(tty) && !C_CRTSCTS(tty))
835 return;
836
837 if (sdio_uart_claim_func(port) != 0)
838 return;
839
840 if (I_IXOFF(tty)) {
841 port->x_char = STOP_CHAR(tty);
842 sdio_uart_start_tx(port);
843 }
844
845 if (C_CRTSCTS(tty))
846 sdio_uart_clear_mctrl(port, TIOCM_RTS);
847
848 sdio_uart_irq(port->func);
849 sdio_uart_release_func(port);
850 }
851
852 static void sdio_uart_unthrottle(struct tty_struct *tty)
853 {
854 struct sdio_uart_port *port = tty->driver_data;
855
856 if (!I_IXOFF(tty) && !C_CRTSCTS(tty))
857 return;
858
859 if (sdio_uart_claim_func(port) != 0)
860 return;
861
862 if (I_IXOFF(tty)) {
863 if (port->x_char) {
864 port->x_char = 0;
865 } else {
866 port->x_char = START_CHAR(tty);
867 sdio_uart_start_tx(port);
868 }
869 }
870
871 if (C_CRTSCTS(tty))
872 sdio_uart_set_mctrl(port, TIOCM_RTS);
873
874 sdio_uart_irq(port->func);
875 sdio_uart_release_func(port);
876 }
877
878 static void sdio_uart_set_termios(struct tty_struct *tty,
879 struct ktermios *old_termios)
880 {
881 struct sdio_uart_port *port = tty->driver_data;
882 unsigned int cflag = tty->termios.c_cflag;
883
884 if (sdio_uart_claim_func(port) != 0)
885 return;
886
887 sdio_uart_change_speed(port, &tty->termios, old_termios);
888
889 /* Handle transition to B0 status */
890 if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
891 sdio_uart_clear_mctrl(port, TIOCM_RTS | TIOCM_DTR);
892
893 /* Handle transition away from B0 status */
894 if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
895 unsigned int mask = TIOCM_DTR;
896 if (!(cflag & CRTSCTS) || !tty_throttled(tty))
897 mask |= TIOCM_RTS;
898 sdio_uart_set_mctrl(port, mask);
899 }
900
901 /* Handle turning off CRTSCTS */
902 if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
903 tty->hw_stopped = 0;
904 sdio_uart_start_tx(port);
905 }
906
907 /* Handle turning on CRTSCTS */
908 if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
909 if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) {
910 tty->hw_stopped = 1;
911 sdio_uart_stop_tx(port);
912 }
913 }
914
915 sdio_uart_release_func(port);
916 }
917
918 static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
919 {
920 struct sdio_uart_port *port = tty->driver_data;
921 int result;
922
923 result = sdio_uart_claim_func(port);
924 if (result != 0)
925 return result;
926
927 if (break_state == -1)
928 port->lcr |= UART_LCR_SBC;
929 else
930 port->lcr &= ~UART_LCR_SBC;
931 sdio_out(port, UART_LCR, port->lcr);
932
933 sdio_uart_release_func(port);
934 return 0;
935 }
936
937 static int sdio_uart_tiocmget(struct tty_struct *tty)
938 {
939 struct sdio_uart_port *port = tty->driver_data;
940 int result;
941
942 result = sdio_uart_claim_func(port);
943 if (!result) {
944 result = port->mctrl | sdio_uart_get_mctrl(port);
945 sdio_uart_release_func(port);
946 }
947
948 return result;
949 }
950
951 static int sdio_uart_tiocmset(struct tty_struct *tty,
952 unsigned int set, unsigned int clear)
953 {
954 struct sdio_uart_port *port = tty->driver_data;
955 int result;
956
957 result = sdio_uart_claim_func(port);
958 if (!result) {
959 sdio_uart_update_mctrl(port, set, clear);
960 sdio_uart_release_func(port);
961 }
962
963 return result;
964 }
965
966 static int sdio_uart_proc_show(struct seq_file *m, void *v)
967 {
968 int i;
969
970 seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
971 "", "", "");
972 for (i = 0; i < UART_NR; i++) {
973 struct sdio_uart_port *port = sdio_uart_port_get(i);
974 if (port) {
975 seq_printf(m, "%d: uart:SDIO", i);
976 if (capable(CAP_SYS_ADMIN)) {
977 seq_printf(m, " tx:%d rx:%d",
978 port->icount.tx, port->icount.rx);
979 if (port->icount.frame)
980 seq_printf(m, " fe:%d",
981 port->icount.frame);
982 if (port->icount.parity)
983 seq_printf(m, " pe:%d",
984 port->icount.parity);
985 if (port->icount.brk)
986 seq_printf(m, " brk:%d",
987 port->icount.brk);
988 if (port->icount.overrun)
989 seq_printf(m, " oe:%d",
990 port->icount.overrun);
991 if (port->icount.cts)
992 seq_printf(m, " cts:%d",
993 port->icount.cts);
994 if (port->icount.dsr)
995 seq_printf(m, " dsr:%d",
996 port->icount.dsr);
997 if (port->icount.rng)
998 seq_printf(m, " rng:%d",
999 port->icount.rng);
1000 if (port->icount.dcd)
1001 seq_printf(m, " dcd:%d",
1002 port->icount.dcd);
1003 }
1004 sdio_uart_port_put(port);
1005 seq_putc(m, '\n');
1006 }
1007 }
1008 return 0;
1009 }
1010
1011 static int sdio_uart_proc_open(struct inode *inode, struct file *file)
1012 {
1013 return single_open(file, sdio_uart_proc_show, NULL);
1014 }
1015
1016 static const struct file_operations sdio_uart_proc_fops = {
1017 .owner = THIS_MODULE,
1018 .open = sdio_uart_proc_open,
1019 .read = seq_read,
1020 .llseek = seq_lseek,
1021 .release = single_release,
1022 };
1023
1024 static const struct tty_port_operations sdio_uart_port_ops = {
1025 .dtr_rts = uart_dtr_rts,
1026 .carrier_raised = uart_carrier_raised,
1027 .shutdown = sdio_uart_shutdown,
1028 .activate = sdio_uart_activate,
1029 .destruct = sdio_uart_port_destroy,
1030 };
1031
1032 static const struct tty_operations sdio_uart_ops = {
1033 .open = sdio_uart_open,
1034 .close = sdio_uart_close,
1035 .write = sdio_uart_write,
1036 .write_room = sdio_uart_write_room,
1037 .chars_in_buffer = sdio_uart_chars_in_buffer,
1038 .send_xchar = sdio_uart_send_xchar,
1039 .throttle = sdio_uart_throttle,
1040 .unthrottle = sdio_uart_unthrottle,
1041 .set_termios = sdio_uart_set_termios,
1042 .hangup = sdio_uart_hangup,
1043 .break_ctl = sdio_uart_break_ctl,
1044 .tiocmget = sdio_uart_tiocmget,
1045 .tiocmset = sdio_uart_tiocmset,
1046 .install = sdio_uart_install,
1047 .cleanup = sdio_uart_cleanup,
1048 .proc_fops = &sdio_uart_proc_fops,
1049 };
1050
1051 static struct tty_driver *sdio_uart_tty_driver;
1052
1053 static int sdio_uart_probe(struct sdio_func *func,
1054 const struct sdio_device_id *id)
1055 {
1056 struct sdio_uart_port *port;
1057 int ret;
1058
1059 port = kzalloc(sizeof(struct sdio_uart_port), GFP_KERNEL);
1060 if (!port)
1061 return -ENOMEM;
1062
1063 if (func->class == SDIO_CLASS_UART) {
1064 pr_warn("%s: need info on UART class basic setup\n",
1065 sdio_func_id(func));
1066 kfree(port);
1067 return -ENOSYS;
1068 } else if (func->class == SDIO_CLASS_GPS) {
1069 /*
1070 * We need tuple 0x91. It contains SUBTPL_SIOREG
1071 * and SUBTPL_RCVCAPS.
1072 */
1073 struct sdio_func_tuple *tpl;
1074 for (tpl = func->tuples; tpl; tpl = tpl->next) {
1075 if (tpl->code != 0x91)
1076 continue;
1077 if (tpl->size < 10)
1078 continue;
1079 if (tpl->data[1] == 0) /* SUBTPL_SIOREG */
1080 break;
1081 }
1082 if (!tpl) {
1083 pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
1084 sdio_func_id(func));
1085 kfree(port);
1086 return -EINVAL;
1087 }
1088 pr_debug("%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
1089 sdio_func_id(func), tpl->data[2], tpl->data[3]);
1090 port->regs_offset = (tpl->data[4] << 0) |
1091 (tpl->data[5] << 8) |
1092 (tpl->data[6] << 16);
1093 pr_debug("%s: regs offset = 0x%x\n",
1094 sdio_func_id(func), port->regs_offset);
1095 port->uartclk = tpl->data[7] * 115200;
1096 if (port->uartclk == 0)
1097 port->uartclk = 115200;
1098 pr_debug("%s: clk %d baudcode %u 4800-div %u\n",
1099 sdio_func_id(func), port->uartclk,
1100 tpl->data[7], tpl->data[8] | (tpl->data[9] << 8));
1101 } else {
1102 kfree(port);
1103 return -EINVAL;
1104 }
1105
1106 port->func = func;
1107 sdio_set_drvdata(func, port);
1108 tty_port_init(&port->port);
1109 port->port.ops = &sdio_uart_port_ops;
1110
1111 ret = sdio_uart_add_port(port);
1112 if (ret) {
1113 kfree(port);
1114 } else {
1115 struct device *dev;
1116 dev = tty_port_register_device(&port->port,
1117 sdio_uart_tty_driver, port->index, &func->dev);
1118 if (IS_ERR(dev)) {
1119 sdio_uart_port_remove(port);
1120 ret = PTR_ERR(dev);
1121 }
1122 }
1123
1124 return ret;
1125 }
1126
1127 static void sdio_uart_remove(struct sdio_func *func)
1128 {
1129 struct sdio_uart_port *port = sdio_get_drvdata(func);
1130
1131 tty_unregister_device(sdio_uart_tty_driver, port->index);
1132 sdio_uart_port_remove(port);
1133 }
1134
1135 static const struct sdio_device_id sdio_uart_ids[] = {
1136 { SDIO_DEVICE_CLASS(SDIO_CLASS_UART) },
1137 { SDIO_DEVICE_CLASS(SDIO_CLASS_GPS) },
1138 { /* end: all zeroes */ },
1139 };
1140
1141 MODULE_DEVICE_TABLE(sdio, sdio_uart_ids);
1142
1143 static struct sdio_driver sdio_uart_driver = {
1144 .probe = sdio_uart_probe,
1145 .remove = sdio_uart_remove,
1146 .name = "sdio_uart",
1147 .id_table = sdio_uart_ids,
1148 };
1149
1150 static int __init sdio_uart_init(void)
1151 {
1152 int ret;
1153 struct tty_driver *tty_drv;
1154
1155 sdio_uart_tty_driver = tty_drv = alloc_tty_driver(UART_NR);
1156 if (!tty_drv)
1157 return -ENOMEM;
1158
1159 tty_drv->driver_name = "sdio_uart";
1160 tty_drv->name = "ttySDIO";
1161 tty_drv->major = 0; /* dynamically allocated */
1162 tty_drv->minor_start = 0;
1163 tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
1164 tty_drv->subtype = SERIAL_TYPE_NORMAL;
1165 tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1166 tty_drv->init_termios = tty_std_termios;
1167 tty_drv->init_termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
1168 tty_drv->init_termios.c_ispeed = 4800;
1169 tty_drv->init_termios.c_ospeed = 4800;
1170 tty_set_operations(tty_drv, &sdio_uart_ops);
1171
1172 ret = tty_register_driver(tty_drv);
1173 if (ret)
1174 goto err1;
1175
1176 ret = sdio_register_driver(&sdio_uart_driver);
1177 if (ret)
1178 goto err2;
1179
1180 return 0;
1181
1182 err2:
1183 tty_unregister_driver(tty_drv);
1184 err1:
1185 put_tty_driver(tty_drv);
1186 return ret;
1187 }
1188
1189 static void __exit sdio_uart_exit(void)
1190 {
1191 sdio_unregister_driver(&sdio_uart_driver);
1192 tty_unregister_driver(sdio_uart_tty_driver);
1193 put_tty_driver(sdio_uart_tty_driver);
1194 }
1195
1196 module_init(sdio_uart_init);
1197 module_exit(sdio_uart_exit);
1198
1199 MODULE_AUTHOR("Nicolas Pitre");
1200 MODULE_LICENSE("GPL");
Linux with added FPC-III support