drivers/mtd/nand/sharpsl.c

   1 /*
   2  * drivers/mtd/nand/sharpsl.c
   3  *
   4  *  Copyright (C) 2004 Richard Purdie
   5  *  Copyright (C) 2008 Dmitry Baryshkov
   6  *
   7  *  Based on Sharp's NAND driver sharp_sl.c
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14
  15 #include <linux/genhd.h>
  16 #include <linux/slab.h>
  17 #include <linux/module.h>
  18 #include <linux/delay.h>
  19 #include <linux/mtd/mtd.h>
  20 #include <linux/mtd/nand.h>
  21 #include <linux/mtd/nand_ecc.h>
  22 #include <linux/mtd/partitions.h>
  23 #include <linux/mtd/sharpsl.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/platform_device.h>
  26
  27 #include <asm/io.h>
  28 #include <mach/hardware.h>
  29 #include <asm/mach-types.h>
  30
  31 struct sharpsl_nand {
  32         struct nand_chip        chip;
  33
  34         void __iomem            *io;
  35 };
  36
  37 static inline struct sharpsl_nand *mtd_to_sharpsl(struct mtd_info *mtd)
  38 {
  39         return container_of(mtd_to_nand(mtd), struct sharpsl_nand, chip);
  40 }
  41
  42 /* register offset */
  43 #define ECCLPLB         0x00    /* line parity 7 - 0 bit */
  44 #define ECCLPUB         0x04    /* line parity 15 - 8 bit */
  45 #define ECCCP           0x08    /* column parity 5 - 0 bit */
  46 #define ECCCNTR         0x0C    /* ECC byte counter */
  47 #define ECCCLRR         0x10    /* cleare ECC */
  48 #define FLASHIO         0x14    /* Flash I/O */
  49 #define FLASHCTL        0x18    /* Flash Control */
  50
  51 /* Flash control bit */
  52 #define FLRYBY          (1 << 5)
  53 #define FLCE1           (1 << 4)
  54 #define FLWP            (1 << 3)
  55 #define FLALE           (1 << 2)
  56 #define FLCLE           (1 << 1)
  57 #define FLCE0           (1 << 0)
  58
  59 /*
  60  *      hardware specific access to control-lines
  61  *      ctrl:
  62  *      NAND_CNE: bit 0 -> ! bit 0 & 4
  63  *      NAND_CLE: bit 1 -> bit 1
  64  *      NAND_ALE: bit 2 -> bit 2
  65  *
  66  */
  67 static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
  68                                    unsigned int ctrl)
  69 {
  70         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
  71         struct nand_chip *chip = mtd_to_nand(mtd);
  72
  73         if (ctrl & NAND_CTRL_CHANGE) {
  74                 unsigned char bits = ctrl & 0x07;
  75
  76                 bits |= (ctrl & 0x01) << 4;
  77
  78                 bits ^= 0x11;
  79
  80                 writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
  81         }
  82
  83         if (cmd != NAND_CMD_NONE)
  84                 writeb(cmd, chip->IO_ADDR_W);
  85 }
  86
  87 static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
  88 {
  89         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
  90         return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
  91 }
  92
  93 static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
  94 {
  95         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
  96         writeb(0, sharpsl->io + ECCCLRR);
  97 }
  98
  99 static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
 100 {
 101         struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
 102         ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
 103         ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
 104         ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
 105         return readb(sharpsl->io + ECCCNTR) != 0;
 106 }
 107
 108 /*
 109  * Main initialization routine
 110  */
 111 static int sharpsl_nand_probe(struct platform_device *pdev)
 112 {
 113         struct nand_chip *this;
 114         struct mtd_info *mtd;
 115         struct resource *r;
 116         int err = 0;
 117         struct sharpsl_nand *sharpsl;
 118         struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
 119
 120         if (!data) {
 121                 dev_err(&pdev->dev, "no platform data!\n");
 122                 return -EINVAL;
 123         }
 124
 125         /* Allocate memory for MTD device structure and private data */
 126         sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
 127         if (!sharpsl)
 128                 return -ENOMEM;
 129
 130         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 131         if (!r) {
 132                 dev_err(&pdev->dev, "no io memory resource defined!\n");
 133                 err = -ENODEV;
 134                 goto err_get_res;
 135         }
 136
 137         /* map physical address */
 138         sharpsl->io = ioremap(r->start, resource_size(r));
 139         if (!sharpsl->io) {
 140                 dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
 141                 err = -EIO;
 142                 goto err_ioremap;
 143         }
 144
 145         /* Get pointer to private data */
 146         this = (struct nand_chip *)(&sharpsl->chip);
 147
 148         /* Link the private data with the MTD structure */
 149         mtd = nand_to_mtd(this);
 150         mtd->dev.parent = &pdev->dev;
 151         mtd_set_ooblayout(mtd, data->ecc_layout);
 152
 153         platform_set_drvdata(pdev, sharpsl);
 154
 155         /*
 156          * PXA initialize
 157          */
 158         writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
 159
 160         /* Set address of NAND IO lines */
 161         this->IO_ADDR_R = sharpsl->io + FLASHIO;
 162         this->IO_ADDR_W = sharpsl->io + FLASHIO;
 163         /* Set address of hardware control function */
 164         this->cmd_ctrl = sharpsl_nand_hwcontrol;
 165         this->dev_ready = sharpsl_nand_dev_ready;
 166         /* 15 us command delay time */
 167         this->chip_delay = 15;
 168         /* set eccmode using hardware ECC */
 169         this->ecc.mode = NAND_ECC_HW;
 170         this->ecc.size = 256;
 171         this->ecc.bytes = 3;
 172         this->ecc.strength = 1;
 173         this->badblock_pattern = data->badblock_pattern;
 174         this->ecc.hwctl = sharpsl_nand_enable_hwecc;
 175         this->ecc.calculate = sharpsl_nand_calculate_ecc;
 176         this->ecc.correct = nand_correct_data;
 177
 178         /* Scan to find existence of the device */
 179         err = nand_scan(mtd, 1);
 180         if (err)
 181                 goto err_scan;
 182
 183         /* Register the partitions */
 184         mtd->name = "sharpsl-nand";
 185
 186         err = mtd_device_parse_register(mtd, NULL, NULL,
 187                                         data->partitions, data->nr_partitions);
 188         if (err)
 189                 goto err_add;
 190
 191         /* Return happy */
 192         return 0;
 193
 194 err_add:
 195         nand_release(mtd);
 196
 197 err_scan:
 198         iounmap(sharpsl->io);
 199 err_ioremap:
 200 err_get_res:
 201         kfree(sharpsl);
 202         return err;
 203 }
 204
 205 /*
 206  * Clean up routine
 207  */
 208 static int sharpsl_nand_remove(struct platform_device *pdev)
 209 {
 210         struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
 211
 212         /* Release resources, unregister device */
 213         nand_release(nand_to_mtd(&sharpsl->chip));
 214
 215         iounmap(sharpsl->io);
 216
 217         /* Free the MTD device structure */
 218         kfree(sharpsl);
 219
 220         return 0;
 221 }
 222
 223 static struct platform_driver sharpsl_nand_driver = {
 224         .driver = {
 225                 .name   = "sharpsl-nand",
 226         },
 227         .probe          = sharpsl_nand_probe,
 228         .remove         = sharpsl_nand_remove,
 229 };
 230
 231 module_platform_driver(sharpsl_nand_driver);
 232
 233 MODULE_LICENSE("GPL");
 234 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
 235 MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");