drivers/mtd/nand/vf610_nfc.c

   1 /*
   2  * Copyright 2009-2015 Freescale Semiconductor, Inc. and others
   3  *
   4  * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
   5  * Jason ported to M54418TWR and MVFA5 (VF610).
   6  * Authors: Stefan Agner <stefan.agner@toradex.com>
   7  *          Bill Pringlemeir <bpringlemeir@nbsps.com>
   8  *          Shaohui Xie <b21989@freescale.com>
   9  *          Jason Jin <Jason.jin@freescale.com>
  10  *
  11  * Based on original driver mpc5121_nfc.c.
  12  *
  13  * This is free software; you can redistribute it and/or modify it
  14  * under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * Limitations:
  19  * - Untested on MPC5125 and M54418.
  20  * - DMA and pipelining not used.
  21  * - 2K pages or less.
  22  * - HW ECC: Only 2K page with 64+ OOB.
  23  * - HW ECC: Only 24 and 32-bit error correction implemented.
  24  */
  25
  26 #include <linux/module.h>
  27 #include <linux/bitops.h>
  28 #include <linux/clk.h>
  29 #include <linux/delay.h>
  30 #include <linux/init.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/io.h>
  33 #include <linux/mtd/mtd.h>
  34 #include <linux/mtd/nand.h>
  35 #include <linux/mtd/partitions.h>
  36 #include <linux/of_device.h>
  37 #include <linux/pinctrl/consumer.h>
  38 #include <linux/platform_device.h>
  39 #include <linux/slab.h>
  40
  41 #define DRV_NAME                "vf610_nfc"
  42
  43 /* Register Offsets */
  44 #define NFC_FLASH_CMD1                  0x3F00
  45 #define NFC_FLASH_CMD2                  0x3F04
  46 #define NFC_COL_ADDR                    0x3F08
  47 #define NFC_ROW_ADDR                    0x3F0c
  48 #define NFC_ROW_ADDR_INC                0x3F14
  49 #define NFC_FLASH_STATUS1               0x3F18
  50 #define NFC_FLASH_STATUS2               0x3F1c
  51 #define NFC_CACHE_SWAP                  0x3F28
  52 #define NFC_SECTOR_SIZE                 0x3F2c
  53 #define NFC_FLASH_CONFIG                0x3F30
  54 #define NFC_IRQ_STATUS                  0x3F38
  55
  56 /* Addresses for NFC MAIN RAM BUFFER areas */
  57 #define NFC_MAIN_AREA(n)                ((n) *  0x1000)
  58
  59 #define PAGE_2K                         0x0800
  60 #define OOB_64                          0x0040
  61 #define OOB_MAX                         0x0100
  62
  63 /*
  64  * NFC_CMD2[CODE] values. See section:
  65  *  - 31.4.7 Flash Command Code Description, Vybrid manual
  66  *  - 23.8.6 Flash Command Sequencer, MPC5125 manual
  67  *
  68  * Briefly these are bitmasks of controller cycles.
  69  */
  70 #define READ_PAGE_CMD_CODE              0x7EE0
  71 #define READ_ONFI_PARAM_CMD_CODE        0x4860
  72 #define PROGRAM_PAGE_CMD_CODE           0x7FC0
  73 #define ERASE_CMD_CODE                  0x4EC0
  74 #define READ_ID_CMD_CODE                0x4804
  75 #define RESET_CMD_CODE                  0x4040
  76 #define STATUS_READ_CMD_CODE            0x4068
  77
  78 /* NFC ECC mode define */
  79 #define ECC_BYPASS                      0
  80 #define ECC_45_BYTE                     6
  81 #define ECC_60_BYTE                     7
  82
  83 /*** Register Mask and bit definitions */
  84
  85 /* NFC_FLASH_CMD1 Field */
  86 #define CMD_BYTE2_MASK                          0xFF000000
  87 #define CMD_BYTE2_SHIFT                         24
  88
  89 /* NFC_FLASH_CM2 Field */
  90 #define CMD_BYTE1_MASK                          0xFF000000
  91 #define CMD_BYTE1_SHIFT                         24
  92 #define CMD_CODE_MASK                           0x00FFFF00
  93 #define CMD_CODE_SHIFT                          8
  94 #define BUFNO_MASK                              0x00000006
  95 #define BUFNO_SHIFT                             1
  96 #define START_BIT                               BIT(0)
  97
  98 /* NFC_COL_ADDR Field */
  99 #define COL_ADDR_MASK                           0x0000FFFF
 100 #define COL_ADDR_SHIFT                          0
 101
 102 /* NFC_ROW_ADDR Field */
 103 #define ROW_ADDR_MASK                           0x00FFFFFF
 104 #define ROW_ADDR_SHIFT                          0
 105 #define ROW_ADDR_CHIP_SEL_RB_MASK               0xF0000000
 106 #define ROW_ADDR_CHIP_SEL_RB_SHIFT              28
 107 #define ROW_ADDR_CHIP_SEL_MASK                  0x0F000000
 108 #define ROW_ADDR_CHIP_SEL_SHIFT                 24
 109
 110 /* NFC_FLASH_STATUS2 Field */
 111 #define STATUS_BYTE1_MASK                       0x000000FF
 112
 113 /* NFC_FLASH_CONFIG Field */
 114 #define CONFIG_ECC_SRAM_ADDR_MASK               0x7FC00000
 115 #define CONFIG_ECC_SRAM_ADDR_SHIFT              22
 116 #define CONFIG_ECC_SRAM_REQ_BIT                 BIT(21)
 117 #define CONFIG_DMA_REQ_BIT                      BIT(20)
 118 #define CONFIG_ECC_MODE_MASK                    0x000E0000
 119 #define CONFIG_ECC_MODE_SHIFT                   17
 120 #define CONFIG_FAST_FLASH_BIT                   BIT(16)
 121 #define CONFIG_16BIT                            BIT(7)
 122 #define CONFIG_BOOT_MODE_BIT                    BIT(6)
 123 #define CONFIG_ADDR_AUTO_INCR_BIT               BIT(5)
 124 #define CONFIG_BUFNO_AUTO_INCR_BIT              BIT(4)
 125 #define CONFIG_PAGE_CNT_MASK                    0xF
 126 #define CONFIG_PAGE_CNT_SHIFT                   0
 127
 128 /* NFC_IRQ_STATUS Field */
 129 #define IDLE_IRQ_BIT                            BIT(29)
 130 #define IDLE_EN_BIT                             BIT(20)
 131 #define CMD_DONE_CLEAR_BIT                      BIT(18)
 132 #define IDLE_CLEAR_BIT                          BIT(17)
 133
 134 /*
 135  * ECC status - seems to consume 8 bytes (double word). The documented
 136  * status byte is located in the lowest byte of the second word (which is
 137  * the 4th or 7th byte depending on endianness).
 138  * Calculate an offset to store the ECC status at the end of the buffer.
 139  */
 140 #define ECC_SRAM_ADDR           (PAGE_2K + OOB_MAX - 8)
 141
 142 #define ECC_STATUS              0x4
 143 #define ECC_STATUS_MASK         0x80
 144 #define ECC_STATUS_ERR_COUNT    0x3F
 145
 146 enum vf610_nfc_alt_buf {
 147         ALT_BUF_DATA = 0,
 148         ALT_BUF_ID = 1,
 149         ALT_BUF_STAT = 2,
 150         ALT_BUF_ONFI = 3,
 151 };
 152
 153 enum vf610_nfc_variant {
 154         NFC_VFC610 = 1,
 155 };
 156
 157 struct vf610_nfc {
 158         struct nand_chip chip;
 159         struct device *dev;
 160         void __iomem *regs;
 161         struct completion cmd_done;
 162         uint buf_offset;
 163         int write_sz;
 164         /* Status and ID are in alternate locations. */
 165         enum vf610_nfc_alt_buf alt_buf;
 166         enum vf610_nfc_variant variant;
 167         struct clk *clk;
 168         bool use_hw_ecc;
 169         u32 ecc_mode;
 170 };
 171
 172 static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd)
 173 {
 174         return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip);
 175 }
 176
 177 static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
 178 {
 179         return readl(nfc->regs + reg);
 180 }
 181
 182 static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val)
 183 {
 184         writel(val, nfc->regs + reg);
 185 }
 186
 187 static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits)
 188 {
 189         vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits);
 190 }
 191
 192 static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits)
 193 {
 194         vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits);
 195 }
 196
 197 static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg,
 198                                        u32 mask, u32 shift, u32 val)
 199 {
 200         vf610_nfc_write(nfc, reg,
 201                         (vf610_nfc_read(nfc, reg) & (~mask)) | val << shift);
 202 }
 203
 204 static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src,
 205                                     size_t n)
 206 {
 207         /*
 208          * Use this accessor for the internal SRAM buffers. On the ARM
 209          * Freescale Vybrid SoC it's known that the driver can treat
 210          * the SRAM buffer as if it's memory. Other platform might need
 211          * to treat the buffers differently.
 212          *
 213          * For the time being, use memcpy
 214          */
 215         memcpy(dst, src, n);
 216 }
 217
 218 /* Clear flags for upcoming command */
 219 static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc)
 220 {
 221         u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS);
 222
 223         tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
 224         vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp);
 225 }
 226
 227 static void vf610_nfc_done(struct vf610_nfc *nfc)
 228 {
 229         unsigned long timeout = msecs_to_jiffies(100);
 230
 231         /*
 232          * Barrier is needed after this write. This write need
 233          * to be done before reading the next register the first
 234          * time.
 235          * vf610_nfc_set implicates such a barrier by using writel
 236          * to write to the register.
 237          */
 238         vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
 239         vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT);
 240
 241         if (!wait_for_completion_timeout(&nfc->cmd_done, timeout))
 242                 dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n");
 243
 244         vf610_nfc_clear_status(nfc);
 245 }
 246
 247 static u8 vf610_nfc_get_id(struct vf610_nfc *nfc, int col)
 248 {
 249         u32 flash_id;
 250
 251         if (col < 4) {
 252                 flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS1);
 253                 flash_id >>= (3 - col) * 8;
 254         } else {
 255                 flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS2);
 256                 flash_id >>= 24;
 257         }
 258
 259         return flash_id & 0xff;
 260 }
 261
 262 static u8 vf610_nfc_get_status(struct vf610_nfc *nfc)
 263 {
 264         return vf610_nfc_read(nfc, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
 265 }
 266
 267 static void vf610_nfc_send_command(struct vf610_nfc *nfc, u32 cmd_byte1,
 268                                    u32 cmd_code)
 269 {
 270         u32 tmp;
 271
 272         vf610_nfc_clear_status(nfc);
 273
 274         tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD2);
 275         tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
 276         tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
 277         tmp |= cmd_code << CMD_CODE_SHIFT;
 278         vf610_nfc_write(nfc, NFC_FLASH_CMD2, tmp);
 279 }
 280
 281 static void vf610_nfc_send_commands(struct vf610_nfc *nfc, u32 cmd_byte1,
 282                                     u32 cmd_byte2, u32 cmd_code)
 283 {
 284         u32 tmp;
 285
 286         vf610_nfc_send_command(nfc, cmd_byte1, cmd_code);
 287
 288         tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD1);
 289         tmp &= ~CMD_BYTE2_MASK;
 290         tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
 291         vf610_nfc_write(nfc, NFC_FLASH_CMD1, tmp);
 292 }
 293
 294 static irqreturn_t vf610_nfc_irq(int irq, void *data)
 295 {
 296         struct mtd_info *mtd = data;
 297         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 298
 299         vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
 300         complete(&nfc->cmd_done);
 301
 302         return IRQ_HANDLED;
 303 }
 304
 305 static void vf610_nfc_addr_cycle(struct vf610_nfc *nfc, int column, int page)
 306 {
 307         if (column != -1) {
 308                 if (nfc->chip.options & NAND_BUSWIDTH_16)
 309                         column = column / 2;
 310                 vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK,
 311                                     COL_ADDR_SHIFT, column);
 312         }
 313         if (page != -1)
 314                 vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK,
 315                                     ROW_ADDR_SHIFT, page);
 316 }
 317
 318 static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode)
 319 {
 320         vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
 321                             CONFIG_ECC_MODE_MASK,
 322                             CONFIG_ECC_MODE_SHIFT, ecc_mode);
 323 }
 324
 325 static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size)
 326 {
 327         vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size);
 328 }
 329
 330 static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 331                               int column, int page)
 332 {
 333         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 334         int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0;
 335
 336         nfc->buf_offset = max(column, 0);
 337         nfc->alt_buf = ALT_BUF_DATA;
 338
 339         switch (command) {
 340         case NAND_CMD_SEQIN:
 341                 /* Use valid column/page from preread... */
 342                 vf610_nfc_addr_cycle(nfc, column, page);
 343                 nfc->buf_offset = 0;
 344
 345                 /*
 346                  * SEQIN => data => PAGEPROG sequence is done by the controller
 347                  * hence we do not need to issue the command here...
 348                  */
 349                 return;
 350         case NAND_CMD_PAGEPROG:
 351                 trfr_sz += nfc->write_sz;
 352                 vf610_nfc_transfer_size(nfc, trfr_sz);
 353                 vf610_nfc_send_commands(nfc, NAND_CMD_SEQIN,
 354                                         command, PROGRAM_PAGE_CMD_CODE);
 355                 if (nfc->use_hw_ecc)
 356                         vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
 357                 else
 358                         vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
 359                 break;
 360
 361         case NAND_CMD_RESET:
 362                 vf610_nfc_transfer_size(nfc, 0);
 363                 vf610_nfc_send_command(nfc, command, RESET_CMD_CODE);
 364                 break;
 365
 366         case NAND_CMD_READOOB:
 367                 trfr_sz += mtd->oobsize;
 368                 column = mtd->writesize;
 369                 vf610_nfc_transfer_size(nfc, trfr_sz);
 370                 vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
 371                                         NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
 372                 vf610_nfc_addr_cycle(nfc, column, page);
 373                 vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
 374                 break;
 375
 376         case NAND_CMD_READ0:
 377                 trfr_sz += mtd->writesize + mtd->oobsize;
 378                 vf610_nfc_transfer_size(nfc, trfr_sz);
 379                 vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
 380                                         NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
 381                 vf610_nfc_addr_cycle(nfc, column, page);
 382                 vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
 383                 break;
 384
 385         case NAND_CMD_PARAM:
 386                 nfc->alt_buf = ALT_BUF_ONFI;
 387                 trfr_sz = 3 * sizeof(struct nand_onfi_params);
 388                 vf610_nfc_transfer_size(nfc, trfr_sz);
 389                 vf610_nfc_send_command(nfc, command, READ_ONFI_PARAM_CMD_CODE);
 390                 vf610_nfc_addr_cycle(nfc, -1, column);
 391                 vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
 392                 break;
 393
 394         case NAND_CMD_ERASE1:
 395                 vf610_nfc_transfer_size(nfc, 0);
 396                 vf610_nfc_send_commands(nfc, command,
 397                                         NAND_CMD_ERASE2, ERASE_CMD_CODE);
 398                 vf610_nfc_addr_cycle(nfc, column, page);
 399                 break;
 400
 401         case NAND_CMD_READID:
 402                 nfc->alt_buf = ALT_BUF_ID;
 403                 nfc->buf_offset = 0;
 404                 vf610_nfc_transfer_size(nfc, 0);
 405                 vf610_nfc_send_command(nfc, command, READ_ID_CMD_CODE);
 406                 vf610_nfc_addr_cycle(nfc, -1, column);
 407                 break;
 408
 409         case NAND_CMD_STATUS:
 410                 nfc->alt_buf = ALT_BUF_STAT;
 411                 vf610_nfc_transfer_size(nfc, 0);
 412                 vf610_nfc_send_command(nfc, command, STATUS_READ_CMD_CODE);
 413                 break;
 414         default:
 415                 return;
 416         }
 417
 418         vf610_nfc_done(nfc);
 419
 420         nfc->use_hw_ecc = false;
 421         nfc->write_sz = 0;
 422 }
 423
 424 static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 425 {
 426         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 427         uint c = nfc->buf_offset;
 428
 429         /* Alternate buffers are only supported through read_byte */
 430         WARN_ON(nfc->alt_buf);
 431
 432         vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len);
 433
 434         nfc->buf_offset += len;
 435 }
 436
 437 static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 438                                 int len)
 439 {
 440         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 441         uint c = nfc->buf_offset;
 442         uint l;
 443
 444         l = min_t(uint, len, mtd->writesize + mtd->oobsize - c);
 445         vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
 446
 447         nfc->write_sz += l;
 448         nfc->buf_offset += l;
 449 }
 450
 451 static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd)
 452 {
 453         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 454         u8 tmp;
 455         uint c = nfc->buf_offset;
 456
 457         switch (nfc->alt_buf) {
 458         case ALT_BUF_ID:
 459                 tmp = vf610_nfc_get_id(nfc, c);
 460                 break;
 461         case ALT_BUF_STAT:
 462                 tmp = vf610_nfc_get_status(nfc);
 463                 break;
 464 #ifdef __LITTLE_ENDIAN
 465         case ALT_BUF_ONFI:
 466                 /* Reverse byte since the controller uses big endianness */
 467                 c = nfc->buf_offset ^ 0x3;
 468                 /* fall-through */
 469 #endif
 470         default:
 471                 tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
 472                 break;
 473         }
 474         nfc->buf_offset++;
 475         return tmp;
 476 }
 477
 478 static u16 vf610_nfc_read_word(struct mtd_info *mtd)
 479 {
 480         u16 tmp;
 481
 482         vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
 483         return tmp;
 484 }
 485
 486 /* If not provided, upper layers apply a fixed delay. */
 487 static int vf610_nfc_dev_ready(struct mtd_info *mtd)
 488 {
 489         /* NFC handles R/B internally; always ready.  */
 490         return 1;
 491 }
 492
 493 /*
 494  * This function supports Vybrid only (MPC5125 would have full RB and four CS)
 495  */
 496 static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
 497 {
 498         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 499         u32 tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
 500
 501         /* Vybrid only (MPC5125 would have full RB and four CS) */
 502         if (nfc->variant != NFC_VFC610)
 503                 return;
 504
 505         tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
 506
 507         if (chip >= 0) {
 508                 tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
 509                 tmp |= BIT(chip) << ROW_ADDR_CHIP_SEL_SHIFT;
 510         }
 511
 512         vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
 513 }
 514
 515 /* Count the number of 0's in buff up to max_bits */
 516 static inline int count_written_bits(uint8_t *buff, int size, int max_bits)
 517 {
 518         uint32_t *buff32 = (uint32_t *)buff;
 519         int k, written_bits = 0;
 520
 521         for (k = 0; k < (size / 4); k++) {
 522                 written_bits += hweight32(~buff32[k]);
 523                 if (unlikely(written_bits > max_bits))
 524                         break;
 525         }
 526
 527         return written_bits;
 528 }
 529
 530 static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat,
 531                                          uint8_t *oob, int page)
 532 {
 533         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 534         u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS;
 535         u8 ecc_status;
 536         u8 ecc_count;
 537         int flips_threshold = nfc->chip.ecc.strength / 2;
 538
 539         ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff;
 540         ecc_count = ecc_status & ECC_STATUS_ERR_COUNT;
 541
 542         if (!(ecc_status & ECC_STATUS_MASK))
 543                 return ecc_count;
 544
 545         /* Read OOB without ECC unit enabled */
 546         vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page);
 547         vf610_nfc_read_buf(mtd, oob, mtd->oobsize);
 548
 549         /*
 550          * On an erased page, bit count (including OOB) should be zero or
 551          * at least less then half of the ECC strength.
 552          */
 553         return nand_check_erased_ecc_chunk(dat, nfc->chip.ecc.size, oob,
 554                                            mtd->oobsize, NULL, 0,
 555                                            flips_threshold);
 556 }
 557
 558 static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 559                                 uint8_t *buf, int oob_required, int page)
 560 {
 561         int eccsize = chip->ecc.size;
 562         int stat;
 563
 564         vf610_nfc_read_buf(mtd, buf, eccsize);
 565         if (oob_required)
 566                 vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
 567
 568         stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page);
 569
 570         if (stat < 0) {
 571                 mtd->ecc_stats.failed++;
 572                 return 0;
 573         } else {
 574                 mtd->ecc_stats.corrected += stat;
 575                 return stat;
 576         }
 577 }
 578
 579 static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 580                                 const uint8_t *buf, int oob_required, int page)
 581 {
 582         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 583
 584         vf610_nfc_write_buf(mtd, buf, mtd->writesize);
 585         if (oob_required)
 586                 vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 587
 588         /* Always write whole page including OOB due to HW ECC */
 589         nfc->use_hw_ecc = true;
 590         nfc->write_sz = mtd->writesize + mtd->oobsize;
 591
 592         return 0;
 593 }
 594
 595 static const struct of_device_id vf610_nfc_dt_ids[] = {
 596         { .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
 597         { /* sentinel */ }
 598 };
 599 MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
 600
 601 static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
 602 {
 603         vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
 604         vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
 605         vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
 606         vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
 607         vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
 608         vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
 609
 610         /* Disable virtual pages, only one elementary transfer unit */
 611         vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
 612                             CONFIG_PAGE_CNT_SHIFT, 1);
 613 }
 614
 615 static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
 616 {
 617         if (nfc->chip.options & NAND_BUSWIDTH_16)
 618                 vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
 619         else
 620                 vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
 621
 622         if (nfc->chip.ecc.mode == NAND_ECC_HW) {
 623                 /* Set ECC status offset in SRAM */
 624                 vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
 625                                     CONFIG_ECC_SRAM_ADDR_MASK,
 626                                     CONFIG_ECC_SRAM_ADDR_SHIFT,
 627                                     ECC_SRAM_ADDR >> 3);
 628
 629                 /* Enable ECC status in SRAM */
 630                 vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
 631         }
 632 }
 633
 634 static int vf610_nfc_probe(struct platform_device *pdev)
 635 {
 636         struct vf610_nfc *nfc;
 637         struct resource *res;
 638         struct mtd_info *mtd;
 639         struct nand_chip *chip;
 640         struct device_node *child;
 641         const struct of_device_id *of_id;
 642         int err;
 643         int irq;
 644
 645         nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
 646         if (!nfc)
 647                 return -ENOMEM;
 648
 649         nfc->dev = &pdev->dev;
 650         chip = &nfc->chip;
 651         mtd = nand_to_mtd(chip);
 652
 653         mtd->owner = THIS_MODULE;
 654         mtd->dev.parent = nfc->dev;
 655         mtd->name = DRV_NAME;
 656
 657         irq = platform_get_irq(pdev, 0);
 658         if (irq <= 0)
 659                 return -EINVAL;
 660
 661         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 662         nfc->regs = devm_ioremap_resource(nfc->dev, res);
 663         if (IS_ERR(nfc->regs))
 664                 return PTR_ERR(nfc->regs);
 665
 666         nfc->clk = devm_clk_get(&pdev->dev, NULL);
 667         if (IS_ERR(nfc->clk))
 668                 return PTR_ERR(nfc->clk);
 669
 670         err = clk_prepare_enable(nfc->clk);
 671         if (err) {
 672                 dev_err(nfc->dev, "Unable to enable clock!\n");
 673                 return err;
 674         }
 675
 676         of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
 677         nfc->variant = (enum vf610_nfc_variant)of_id->data;
 678
 679         for_each_available_child_of_node(nfc->dev->of_node, child) {
 680                 if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
 681
 682                         if (nand_get_flash_node(chip)) {
 683                                 dev_err(nfc->dev,
 684                                         "Only one NAND chip supported!\n");
 685                                 err = -EINVAL;
 686                                 goto error;
 687                         }
 688
 689                         nand_set_flash_node(chip, child);
 690                 }
 691         }
 692
 693         if (!nand_get_flash_node(chip)) {
 694                 dev_err(nfc->dev, "NAND chip sub-node missing!\n");
 695                 err = -ENODEV;
 696                 goto err_clk;
 697         }
 698
 699         chip->dev_ready = vf610_nfc_dev_ready;
 700         chip->cmdfunc = vf610_nfc_command;
 701         chip->read_byte = vf610_nfc_read_byte;
 702         chip->read_word = vf610_nfc_read_word;
 703         chip->read_buf = vf610_nfc_read_buf;
 704         chip->write_buf = vf610_nfc_write_buf;
 705         chip->select_chip = vf610_nfc_select_chip;
 706
 707         chip->options |= NAND_NO_SUBPAGE_WRITE;
 708
 709         init_completion(&nfc->cmd_done);
 710
 711         err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, mtd);
 712         if (err) {
 713                 dev_err(nfc->dev, "Error requesting IRQ!\n");
 714                 goto error;
 715         }
 716
 717         vf610_nfc_preinit_controller(nfc);
 718
 719         /* first scan to find the device and get the page size */
 720         err = nand_scan_ident(mtd, 1, NULL);
 721         if (err)
 722                 goto error;
 723
 724         vf610_nfc_init_controller(nfc);
 725
 726         /* Bad block options. */
 727         if (chip->bbt_options & NAND_BBT_USE_FLASH)
 728                 chip->bbt_options |= NAND_BBT_NO_OOB;
 729
 730         /* Single buffer only, max 256 OOB minus ECC status */
 731         if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
 732                 dev_err(nfc->dev, "Unsupported flash page size\n");
 733                 err = -ENXIO;
 734                 goto error;
 735         }
 736
 737         if (chip->ecc.mode == NAND_ECC_HW) {
 738                 if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
 739                         dev_err(nfc->dev, "Unsupported flash with hwecc\n");
 740                         err = -ENXIO;
 741                         goto error;
 742                 }
 743
 744                 if (chip->ecc.size != mtd->writesize) {
 745                         dev_err(nfc->dev, "Step size needs to be page size\n");
 746                         err = -ENXIO;
 747                         goto error;
 748                 }
 749
 750                 /* Only 64 byte ECC layouts known */
 751                 if (mtd->oobsize > 64)
 752                         mtd->oobsize = 64;
 753
 754                 /*
 755                  * mtd->ecclayout is not specified here because we're using the
 756                  * default large page ECC layout defined in NAND core.
 757                  */
 758                 if (chip->ecc.strength == 32) {
 759                         nfc->ecc_mode = ECC_60_BYTE;
 760                         chip->ecc.bytes = 60;
 761                 } else if (chip->ecc.strength == 24) {
 762                         nfc->ecc_mode = ECC_45_BYTE;
 763                         chip->ecc.bytes = 45;
 764                 } else {
 765                         dev_err(nfc->dev, "Unsupported ECC strength\n");
 766                         err = -ENXIO;
 767                         goto error;
 768                 }
 769
 770                 chip->ecc.read_page = vf610_nfc_read_page;
 771                 chip->ecc.write_page = vf610_nfc_write_page;
 772
 773                 chip->ecc.size = PAGE_2K;
 774         }
 775
 776         /* second phase scan */
 777         err = nand_scan_tail(mtd);
 778         if (err)
 779                 goto error;
 780
 781         platform_set_drvdata(pdev, mtd);
 782
 783         /* Register device in MTD */
 784         return mtd_device_register(mtd, NULL, 0);
 785
 786 error:
 787         of_node_put(nand_get_flash_node(chip));
 788 err_clk:
 789         clk_disable_unprepare(nfc->clk);
 790         return err;
 791 }
 792
 793 static int vf610_nfc_remove(struct platform_device *pdev)
 794 {
 795         struct mtd_info *mtd = platform_get_drvdata(pdev);
 796         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 797
 798         nand_release(mtd);
 799         clk_disable_unprepare(nfc->clk);
 800         return 0;
 801 }
 802
 803 #ifdef CONFIG_PM_SLEEP
 804 static int vf610_nfc_suspend(struct device *dev)
 805 {
 806         struct mtd_info *mtd = dev_get_drvdata(dev);
 807         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 808
 809         clk_disable_unprepare(nfc->clk);
 810         return 0;
 811 }
 812
 813 static int vf610_nfc_resume(struct device *dev)
 814 {
 815         struct mtd_info *mtd = dev_get_drvdata(dev);
 816         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 817
 818         pinctrl_pm_select_default_state(dev);
 819
 820         clk_prepare_enable(nfc->clk);
 821
 822         vf610_nfc_preinit_controller(nfc);
 823         vf610_nfc_init_controller(nfc);
 824         return 0;
 825 }
 826 #endif
 827
 828 static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
 829
 830 static struct platform_driver vf610_nfc_driver = {
 831         .driver         = {
 832                 .name   = DRV_NAME,
 833                 .of_match_table = vf610_nfc_dt_ids,
 834                 .pm     = &vf610_nfc_pm_ops,
 835         },
 836         .probe          = vf610_nfc_probe,
 837         .remove         = vf610_nfc_remove,
 838 };
 839
 840 module_platform_driver(vf610_nfc_driver);
 841
 842 MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
 843 MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver");
 844 MODULE_LICENSE("GPL");