x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / net / ethernet / amd / ni65.c
blob5985bf220a8da9d426a38d7e593f6daaa3859de0
1 /*
2 * ni6510 (am7990 'lance' chip) driver for Linux-net-3
3 * BETAcode v0.71 (96/09/29) for 2.0.0 (or later)
4 * copyrights (c) 1994,1995,1996 by M.Hipp
6 * This driver can handle the old ni6510 board and the newer ni6510
7 * EtherBlaster. (probably it also works with every full NE2100
8 * compatible card)
10 * driver probes: io: 0x360,0x300,0x320,0x340 / dma: 3,5,6,7
12 * This is an extension to the Linux operating system, and is covered by the
13 * same GNU General Public License that covers the Linux-kernel.
15 * comments/bugs/suggestions can be sent to:
16 * Michael Hipp
17 * email: hippm@informatik.uni-tuebingen.de
19 * sources:
20 * some things are from the 'ni6510-packet-driver for dos by Russ Nelson'
21 * and from the original drivers by D.Becker
23 * known problems:
24 * - on some PCI boards (including my own) the card/board/ISA-bridge has
25 * problems with bus master DMA. This results in lotsa overruns.
26 * It may help to '#define RCV_PARANOIA_CHECK' or try to #undef
27 * the XMT and RCV_VIA_SKB option .. this reduces driver performance.
28 * Or just play with your BIOS options to optimize ISA-DMA access.
29 * Maybe you also wanna play with the LOW_PERFORAMCE and MID_PERFORMANCE
30 * defines -> please report me your experience then
31 * - Harald reported for ASUS SP3G mainboards, that you should use
32 * the 'optimal settings' from the user's manual on page 3-12!
34 * credits:
35 * thanx to Jason Sullivan for sending me a ni6510 card!
36 * lot of debug runs with ASUS SP3G Boards (Intel Saturn) by Harald Koenig
38 * simple performance test: (486DX-33/Ni6510-EB receives from 486DX4-100/Ni6510-EB)
39 * average: FTP -> 8384421 bytes received in 8.5 seconds
40 * (no RCV_VIA_SKB,no XMT_VIA_SKB,PARANOIA_CHECK,4 XMIT BUFS, 8 RCV_BUFFS)
41 * peak: FTP -> 8384421 bytes received in 7.5 seconds
42 * (RCV_VIA_SKB,XMT_VIA_SKB,no PARANOIA_CHECK,1(!) XMIT BUF, 16 RCV BUFFS)
46 * 99.Jun.8: added support for /proc/net/dev byte count for xosview (HK)
47 * 96.Sept.29: virt_to_bus stuff added for new memory modell
48 * 96.April.29: Added Harald Koenig's Patches (MH)
49 * 96.April.13: enhanced error handling .. more tests (MH)
50 * 96.April.5/6: a lot of performance tests. Got it stable now (hopefully) (MH)
51 * 96.April.1: (no joke ;) .. added EtherBlaster and Module support (MH)
52 * 96.Feb.19: fixed a few bugs .. cleanups .. tested for 1.3.66 (MH)
53 * hopefully no more 16MB limit
55 * 95.Nov.18: multicast tweaked (AC).
57 * 94.Aug.22: changes in xmit_intr (ack more than one xmitted-packet), ni65_send_packet (p->lock) (MH)
59 * 94.July.16: fixed bugs in recv_skb and skb-alloc stuff (MH)
62 #include <linux/kernel.h>
63 #include <linux/string.h>
64 #include <linux/errno.h>
65 #include <linux/ioport.h>
66 #include <linux/slab.h>
67 #include <linux/interrupt.h>
68 #include <linux/delay.h>
69 #include <linux/init.h>
70 #include <linux/netdevice.h>
71 #include <linux/etherdevice.h>
72 #include <linux/skbuff.h>
73 #include <linux/module.h>
74 #include <linux/bitops.h>
76 #include <asm/io.h>
77 #include <asm/dma.h>
79 #include "ni65.h"
82 * the current setting allows an acceptable performance
83 * for 'RCV_PARANOIA_CHECK' read the 'known problems' part in
84 * the header of this file
85 * 'invert' the defines for max. performance. This may cause DMA problems
86 * on some boards (e.g on my ASUS SP3G)
88 #undef XMT_VIA_SKB
89 #undef RCV_VIA_SKB
90 #define RCV_PARANOIA_CHECK
92 #define MID_PERFORMANCE
94 #if defined( LOW_PERFORMANCE )
95 static int isa0=7,isa1=7,csr80=0x0c10;
96 #elif defined( MID_PERFORMANCE )
97 static int isa0=5,isa1=5,csr80=0x2810;
98 #else /* high performance */
99 static int isa0=4,isa1=4,csr80=0x0017;
100 #endif
103 * a few card/vendor specific defines
105 #define NI65_ID0 0x00
106 #define NI65_ID1 0x55
107 #define NI65_EB_ID0 0x52
108 #define NI65_EB_ID1 0x44
109 #define NE2100_ID0 0x57
110 #define NE2100_ID1 0x57
112 #define PORT p->cmdr_addr
115 * buffer configuration
117 #if 1
118 #define RMDNUM 16
119 #define RMDNUMMASK 0x80000000
120 #else
121 #define RMDNUM 8
122 #define RMDNUMMASK 0x60000000 /* log2(RMDNUM)<<29 */
123 #endif
125 #if 0
126 #define TMDNUM 1
127 #define TMDNUMMASK 0x00000000
128 #else
129 #define TMDNUM 4
130 #define TMDNUMMASK 0x40000000 /* log2(TMDNUM)<<29 */
131 #endif
133 /* slightly oversized */
134 #define R_BUF_SIZE 1544
135 #define T_BUF_SIZE 1544
138 * lance register defines
140 #define L_DATAREG 0x00
141 #define L_ADDRREG 0x02
142 #define L_RESET 0x04
143 #define L_CONFIG 0x05
144 #define L_BUSIF 0x06
147 * to access the lance/am7990-regs, you have to write
148 * reg-number into L_ADDRREG, then you can access it using L_DATAREG
150 #define CSR0 0x00
151 #define CSR1 0x01
152 #define CSR2 0x02
153 #define CSR3 0x03
155 #define INIT_RING_BEFORE_START 0x1
156 #define FULL_RESET_ON_ERROR 0x2
158 #if 0
159 #define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);inw(PORT+L_ADDRREG); \
160 outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
161 #define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_ADDRREG),\
162 inw(PORT+L_DATAREG))
163 #if 0
164 #define writedatareg(val) {outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
165 #else
166 #define writedatareg(val) { writereg(val,CSR0); }
167 #endif
168 #else
169 #define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);outw(val,PORT+L_DATAREG);}
170 #define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_DATAREG))
171 #define writedatareg(val) { writereg(val,CSR0); }
172 #endif
174 static unsigned char ni_vendor[] = { 0x02,0x07,0x01 };
176 static struct card {
177 unsigned char id0,id1;
178 short id_offset;
179 short total_size;
180 short cmd_offset;
181 short addr_offset;
182 unsigned char *vendor_id;
183 char *cardname;
184 unsigned long config;
185 } cards[] = {
187 .id0 = NI65_ID0,
188 .id1 = NI65_ID1,
189 .id_offset = 0x0e,
190 .total_size = 0x10,
191 .cmd_offset = 0x0,
192 .addr_offset = 0x8,
193 .vendor_id = ni_vendor,
194 .cardname = "ni6510",
195 .config = 0x1,
198 .id0 = NI65_EB_ID0,
199 .id1 = NI65_EB_ID1,
200 .id_offset = 0x0e,
201 .total_size = 0x18,
202 .cmd_offset = 0x10,
203 .addr_offset = 0x0,
204 .vendor_id = ni_vendor,
205 .cardname = "ni6510 EtherBlaster",
206 .config = 0x2,
209 .id0 = NE2100_ID0,
210 .id1 = NE2100_ID1,
211 .id_offset = 0x0e,
212 .total_size = 0x18,
213 .cmd_offset = 0x10,
214 .addr_offset = 0x0,
215 .vendor_id = NULL,
216 .cardname = "generic NE2100",
217 .config = 0x0,
220 #define NUM_CARDS 3
222 struct priv
224 struct rmd rmdhead[RMDNUM];
225 struct tmd tmdhead[TMDNUM];
226 struct init_block ib;
227 int rmdnum;
228 int tmdnum,tmdlast;
229 #ifdef RCV_VIA_SKB
230 struct sk_buff *recv_skb[RMDNUM];
231 #else
232 void *recvbounce[RMDNUM];
233 #endif
234 #ifdef XMT_VIA_SKB
235 struct sk_buff *tmd_skb[TMDNUM];
236 #endif
237 void *tmdbounce[TMDNUM];
238 int tmdbouncenum;
239 int lock,xmit_queued;
241 void *self;
242 int cmdr_addr;
243 int cardno;
244 int features;
245 spinlock_t ring_lock;
248 static int ni65_probe1(struct net_device *dev,int);
249 static irqreturn_t ni65_interrupt(int irq, void * dev_id);
250 static void ni65_recv_intr(struct net_device *dev,int);
251 static void ni65_xmit_intr(struct net_device *dev,int);
252 static int ni65_open(struct net_device *dev);
253 static int ni65_lance_reinit(struct net_device *dev);
254 static void ni65_init_lance(struct priv *p,unsigned char*,int,int);
255 static netdev_tx_t ni65_send_packet(struct sk_buff *skb,
256 struct net_device *dev);
257 static void ni65_timeout(struct net_device *dev);
258 static int ni65_close(struct net_device *dev);
259 static int ni65_alloc_buffer(struct net_device *dev);
260 static void ni65_free_buffer(struct priv *p);
261 static void set_multicast_list(struct net_device *dev);
263 static int irqtab[] __initdata = { 9,12,15,5 }; /* irq config-translate */
264 static int dmatab[] __initdata = { 0,3,5,6,7 }; /* dma config-translate and autodetect */
266 static int debuglevel = 1;
269 * set 'performance' registers .. we must STOP lance for that
271 static void ni65_set_performance(struct priv *p)
273 writereg(CSR0_STOP | CSR0_CLRALL,CSR0); /* STOP */
275 if( !(cards[p->cardno].config & 0x02) )
276 return;
278 outw(80,PORT+L_ADDRREG);
279 if(inw(PORT+L_ADDRREG) != 80)
280 return;
282 writereg( (csr80 & 0x3fff) ,80); /* FIFO watermarks */
283 outw(0,PORT+L_ADDRREG);
284 outw((short)isa0,PORT+L_BUSIF); /* write ISA 0: DMA_R : isa0 * 50ns */
285 outw(1,PORT+L_ADDRREG);
286 outw((short)isa1,PORT+L_BUSIF); /* write ISA 1: DMA_W : isa1 * 50ns */
288 outw(CSR0,PORT+L_ADDRREG); /* switch back to CSR0 */
292 * open interface (up)
294 static int ni65_open(struct net_device *dev)
296 struct priv *p = dev->ml_priv;
297 int irqval = request_irq(dev->irq, ni65_interrupt,0,
298 cards[p->cardno].cardname,dev);
299 if (irqval) {
300 printk(KERN_ERR "%s: unable to get IRQ %d (irqval=%d).\n",
301 dev->name,dev->irq, irqval);
302 return -EAGAIN;
305 if(ni65_lance_reinit(dev))
307 netif_start_queue(dev);
308 return 0;
310 else
312 free_irq(dev->irq,dev);
313 return -EAGAIN;
318 * close interface (down)
320 static int ni65_close(struct net_device *dev)
322 struct priv *p = dev->ml_priv;
324 netif_stop_queue(dev);
326 outw(inw(PORT+L_RESET),PORT+L_RESET); /* that's the hard way */
328 #ifdef XMT_VIA_SKB
330 int i;
331 for(i=0;i<TMDNUM;i++)
333 if(p->tmd_skb[i]) {
334 dev_kfree_skb(p->tmd_skb[i]);
335 p->tmd_skb[i] = NULL;
339 #endif
340 free_irq(dev->irq,dev);
341 return 0;
344 static void cleanup_card(struct net_device *dev)
346 struct priv *p = dev->ml_priv;
347 disable_dma(dev->dma);
348 free_dma(dev->dma);
349 release_region(dev->base_addr, cards[p->cardno].total_size);
350 ni65_free_buffer(p);
353 /* set: io,irq,dma or set it when calling insmod */
354 static int irq;
355 static int io;
356 static int dma;
359 * Probe The Card (not the lance-chip)
361 struct net_device * __init ni65_probe(int unit)
363 struct net_device *dev = alloc_etherdev(0);
364 static const int ports[] = { 0x360, 0x300, 0x320, 0x340, 0 };
365 const int *port;
366 int err = 0;
368 if (!dev)
369 return ERR_PTR(-ENOMEM);
371 if (unit >= 0) {
372 sprintf(dev->name, "eth%d", unit);
373 netdev_boot_setup_check(dev);
374 irq = dev->irq;
375 dma = dev->dma;
376 } else {
377 dev->base_addr = io;
380 if (dev->base_addr > 0x1ff) { /* Check a single specified location. */
381 err = ni65_probe1(dev, dev->base_addr);
382 } else if (dev->base_addr > 0) { /* Don't probe at all. */
383 err = -ENXIO;
384 } else {
385 for (port = ports; *port && ni65_probe1(dev, *port); port++)
387 if (!*port)
388 err = -ENODEV;
390 if (err)
391 goto out;
393 err = register_netdev(dev);
394 if (err)
395 goto out1;
396 return dev;
397 out1:
398 cleanup_card(dev);
399 out:
400 free_netdev(dev);
401 return ERR_PTR(err);
404 static const struct net_device_ops ni65_netdev_ops = {
405 .ndo_open = ni65_open,
406 .ndo_stop = ni65_close,
407 .ndo_start_xmit = ni65_send_packet,
408 .ndo_tx_timeout = ni65_timeout,
409 .ndo_set_rx_mode = set_multicast_list,
410 .ndo_set_mac_address = eth_mac_addr,
411 .ndo_validate_addr = eth_validate_addr,
415 * this is the real card probe ..
417 static int __init ni65_probe1(struct net_device *dev,int ioaddr)
419 int i,j;
420 struct priv *p;
421 unsigned long flags;
423 dev->irq = irq;
424 dev->dma = dma;
426 for(i=0;i<NUM_CARDS;i++) {
427 if(!request_region(ioaddr, cards[i].total_size, cards[i].cardname))
428 continue;
429 if(cards[i].id_offset >= 0) {
430 if(inb(ioaddr+cards[i].id_offset+0) != cards[i].id0 ||
431 inb(ioaddr+cards[i].id_offset+1) != cards[i].id1) {
432 release_region(ioaddr, cards[i].total_size);
433 continue;
436 if(cards[i].vendor_id) {
437 for(j=0;j<3;j++)
438 if(inb(ioaddr+cards[i].addr_offset+j) != cards[i].vendor_id[j]) {
439 release_region(ioaddr, cards[i].total_size);
440 continue;
443 break;
445 if(i == NUM_CARDS)
446 return -ENODEV;
448 for(j=0;j<6;j++)
449 dev->dev_addr[j] = inb(ioaddr+cards[i].addr_offset+j);
451 if( (j=ni65_alloc_buffer(dev)) < 0) {
452 release_region(ioaddr, cards[i].total_size);
453 return j;
455 p = dev->ml_priv;
456 p->cmdr_addr = ioaddr + cards[i].cmd_offset;
457 p->cardno = i;
458 spin_lock_init(&p->ring_lock);
460 printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cards[p->cardno].cardname , ioaddr);
462 outw(inw(PORT+L_RESET),PORT+L_RESET); /* first: reset the card */
463 if( (j=readreg(CSR0)) != 0x4) {
464 printk("failed.\n");
465 printk(KERN_ERR "%s: Can't RESET card: %04x\n", dev->name, j);
466 ni65_free_buffer(p);
467 release_region(ioaddr, cards[p->cardno].total_size);
468 return -EAGAIN;
471 outw(88,PORT+L_ADDRREG);
472 if(inw(PORT+L_ADDRREG) == 88) {
473 unsigned long v;
474 v = inw(PORT+L_DATAREG);
475 v <<= 16;
476 outw(89,PORT+L_ADDRREG);
477 v |= inw(PORT+L_DATAREG);
478 printk("Version %#08lx, ",v);
479 p->features = INIT_RING_BEFORE_START;
481 else {
482 printk("ancient LANCE, ");
483 p->features = 0x0;
486 if(test_bit(0,&cards[i].config)) {
487 dev->irq = irqtab[(inw(ioaddr+L_CONFIG)>>2)&3];
488 dev->dma = dmatab[inw(ioaddr+L_CONFIG)&3];
489 printk("IRQ %d (from card), DMA %d (from card).\n",dev->irq,dev->dma);
491 else {
492 if(dev->dma == 0) {
493 /* 'stuck test' from lance.c */
494 unsigned long dma_channels =
495 ((inb(DMA1_STAT_REG) >> 4) & 0x0f)
496 | (inb(DMA2_STAT_REG) & 0xf0);
497 for(i=1;i<5;i++) {
498 int dma = dmatab[i];
499 if(test_bit(dma,&dma_channels) || request_dma(dma,"ni6510"))
500 continue;
502 flags=claim_dma_lock();
503 disable_dma(dma);
504 set_dma_mode(dma,DMA_MODE_CASCADE);
505 enable_dma(dma);
506 release_dma_lock(flags);
508 ni65_init_lance(p,dev->dev_addr,0,0); /* trigger memory access */
510 flags=claim_dma_lock();
511 disable_dma(dma);
512 free_dma(dma);
513 release_dma_lock(flags);
515 if(readreg(CSR0) & CSR0_IDON)
516 break;
518 if(i == 5) {
519 printk("failed.\n");
520 printk(KERN_ERR "%s: Can't detect DMA channel!\n", dev->name);
521 ni65_free_buffer(p);
522 release_region(ioaddr, cards[p->cardno].total_size);
523 return -EAGAIN;
525 dev->dma = dmatab[i];
526 printk("DMA %d (autodetected), ",dev->dma);
528 else
529 printk("DMA %d (assigned), ",dev->dma);
531 if(dev->irq < 2)
533 unsigned long irq_mask;
535 ni65_init_lance(p,dev->dev_addr,0,0);
536 irq_mask = probe_irq_on();
537 writereg(CSR0_INIT|CSR0_INEA,CSR0); /* trigger interrupt */
538 msleep(20);
539 dev->irq = probe_irq_off(irq_mask);
540 if(!dev->irq)
542 printk("Failed to detect IRQ line!\n");
543 ni65_free_buffer(p);
544 release_region(ioaddr, cards[p->cardno].total_size);
545 return -EAGAIN;
547 printk("IRQ %d (autodetected).\n",dev->irq);
549 else
550 printk("IRQ %d (assigned).\n",dev->irq);
553 if(request_dma(dev->dma, cards[p->cardno].cardname ) != 0)
555 printk(KERN_ERR "%s: Can't request dma-channel %d\n",dev->name,(int) dev->dma);
556 ni65_free_buffer(p);
557 release_region(ioaddr, cards[p->cardno].total_size);
558 return -EAGAIN;
561 dev->base_addr = ioaddr;
562 dev->netdev_ops = &ni65_netdev_ops;
563 dev->watchdog_timeo = HZ/2;
565 return 0; /* everything is OK */
569 * set lance register and trigger init
571 static void ni65_init_lance(struct priv *p,unsigned char *daddr,int filter,int mode)
573 int i;
574 u32 pib;
576 writereg(CSR0_CLRALL|CSR0_STOP,CSR0);
578 for(i=0;i<6;i++)
579 p->ib.eaddr[i] = daddr[i];
581 for(i=0;i<8;i++)
582 p->ib.filter[i] = filter;
583 p->ib.mode = mode;
585 p->ib.trp = (u32) isa_virt_to_bus(p->tmdhead) | TMDNUMMASK;
586 p->ib.rrp = (u32) isa_virt_to_bus(p->rmdhead) | RMDNUMMASK;
587 writereg(0,CSR3); /* busmaster/no word-swap */
588 pib = (u32) isa_virt_to_bus(&p->ib);
589 writereg(pib & 0xffff,CSR1);
590 writereg(pib >> 16,CSR2);
592 writereg(CSR0_INIT,CSR0); /* this changes L_ADDRREG to CSR0 */
594 for(i=0;i<32;i++)
596 mdelay(4);
597 if(inw(PORT+L_DATAREG) & (CSR0_IDON | CSR0_MERR) )
598 break; /* init ok ? */
603 * allocate memory area and check the 16MB border
605 static void *ni65_alloc_mem(struct net_device *dev,char *what,int size,int type)
607 struct sk_buff *skb=NULL;
608 unsigned char *ptr;
609 void *ret;
611 if(type) {
612 ret = skb = alloc_skb(2+16+size,GFP_KERNEL|GFP_DMA);
613 if(!skb) {
614 printk(KERN_WARNING "%s: unable to allocate %s memory.\n",dev->name,what);
615 return NULL;
617 skb_reserve(skb,2+16);
618 skb_put(skb,R_BUF_SIZE); /* grab the whole space .. (not necessary) */
619 ptr = skb->data;
621 else {
622 ret = ptr = kmalloc(T_BUF_SIZE,GFP_KERNEL | GFP_DMA);
623 if(!ret)
624 return NULL;
626 if( (u32) virt_to_phys(ptr+size) > 0x1000000) {
627 printk(KERN_WARNING "%s: unable to allocate %s memory in lower 16MB!\n",dev->name,what);
628 if(type)
629 kfree_skb(skb);
630 else
631 kfree(ptr);
632 return NULL;
634 return ret;
638 * allocate all memory structures .. send/recv buffers etc ...
640 static int ni65_alloc_buffer(struct net_device *dev)
642 unsigned char *ptr;
643 struct priv *p;
644 int i;
647 * we need 8-aligned memory ..
649 ptr = ni65_alloc_mem(dev,"BUFFER",sizeof(struct priv)+8,0);
650 if(!ptr)
651 return -ENOMEM;
653 p = dev->ml_priv = (struct priv *) (((unsigned long) ptr + 7) & ~0x7);
654 memset((char *)p, 0, sizeof(struct priv));
655 p->self = ptr;
657 for(i=0;i<TMDNUM;i++)
659 #ifdef XMT_VIA_SKB
660 p->tmd_skb[i] = NULL;
661 #endif
662 p->tmdbounce[i] = ni65_alloc_mem(dev,"XMIT",T_BUF_SIZE,0);
663 if(!p->tmdbounce[i]) {
664 ni65_free_buffer(p);
665 return -ENOMEM;
669 for(i=0;i<RMDNUM;i++)
671 #ifdef RCV_VIA_SKB
672 p->recv_skb[i] = ni65_alloc_mem(dev,"RECV",R_BUF_SIZE,1);
673 if(!p->recv_skb[i]) {
674 ni65_free_buffer(p);
675 return -ENOMEM;
677 #else
678 p->recvbounce[i] = ni65_alloc_mem(dev,"RECV",R_BUF_SIZE,0);
679 if(!p->recvbounce[i]) {
680 ni65_free_buffer(p);
681 return -ENOMEM;
683 #endif
686 return 0; /* everything is OK */
690 * free buffers and private struct
692 static void ni65_free_buffer(struct priv *p)
694 int i;
696 if(!p)
697 return;
699 for(i=0;i<TMDNUM;i++) {
700 kfree(p->tmdbounce[i]);
701 #ifdef XMT_VIA_SKB
702 if(p->tmd_skb[i])
703 dev_kfree_skb(p->tmd_skb[i]);
704 #endif
707 for(i=0;i<RMDNUM;i++)
709 #ifdef RCV_VIA_SKB
710 if(p->recv_skb[i])
711 dev_kfree_skb(p->recv_skb[i]);
712 #else
713 kfree(p->recvbounce[i]);
714 #endif
716 kfree(p->self);
721 * stop and (re)start lance .. e.g after an error
723 static void ni65_stop_start(struct net_device *dev,struct priv *p)
725 int csr0 = CSR0_INEA;
727 writedatareg(CSR0_STOP);
729 if(debuglevel > 1)
730 printk(KERN_DEBUG "ni65_stop_start\n");
732 if(p->features & INIT_RING_BEFORE_START) {
733 int i;
734 #ifdef XMT_VIA_SKB
735 struct sk_buff *skb_save[TMDNUM];
736 #endif
737 unsigned long buffer[TMDNUM];
738 short blen[TMDNUM];
740 if(p->xmit_queued) {
741 while(1) {
742 if((p->tmdhead[p->tmdlast].u.s.status & XMIT_OWN))
743 break;
744 p->tmdlast = (p->tmdlast + 1) & (TMDNUM-1);
745 if(p->tmdlast == p->tmdnum)
746 break;
750 for(i=0;i<TMDNUM;i++) {
751 struct tmd *tmdp = p->tmdhead + i;
752 #ifdef XMT_VIA_SKB
753 skb_save[i] = p->tmd_skb[i];
754 #endif
755 buffer[i] = (u32) isa_bus_to_virt(tmdp->u.buffer);
756 blen[i] = tmdp->blen;
757 tmdp->u.s.status = 0x0;
760 for(i=0;i<RMDNUM;i++) {
761 struct rmd *rmdp = p->rmdhead + i;
762 rmdp->u.s.status = RCV_OWN;
764 p->tmdnum = p->xmit_queued = 0;
765 writedatareg(CSR0_STRT | csr0);
767 for(i=0;i<TMDNUM;i++) {
768 int num = (i + p->tmdlast) & (TMDNUM-1);
769 p->tmdhead[i].u.buffer = (u32) isa_virt_to_bus((char *)buffer[num]); /* status is part of buffer field */
770 p->tmdhead[i].blen = blen[num];
771 if(p->tmdhead[i].u.s.status & XMIT_OWN) {
772 p->tmdnum = (p->tmdnum + 1) & (TMDNUM-1);
773 p->xmit_queued = 1;
774 writedatareg(CSR0_TDMD | CSR0_INEA | csr0);
776 #ifdef XMT_VIA_SKB
777 p->tmd_skb[i] = skb_save[num];
778 #endif
780 p->rmdnum = p->tmdlast = 0;
781 if(!p->lock)
782 if (p->tmdnum || !p->xmit_queued)
783 netif_wake_queue(dev);
784 netif_trans_update(dev); /* prevent tx timeout */
786 else
787 writedatareg(CSR0_STRT | csr0);
791 * init lance (write init-values .. init-buffers) (open-helper)
793 static int ni65_lance_reinit(struct net_device *dev)
795 int i;
796 struct priv *p = dev->ml_priv;
797 unsigned long flags;
799 p->lock = 0;
800 p->xmit_queued = 0;
802 flags=claim_dma_lock();
803 disable_dma(dev->dma); /* I've never worked with dma, but we do it like the packetdriver */
804 set_dma_mode(dev->dma,DMA_MODE_CASCADE);
805 enable_dma(dev->dma);
806 release_dma_lock(flags);
808 outw(inw(PORT+L_RESET),PORT+L_RESET); /* first: reset the card */
809 if( (i=readreg(CSR0) ) != 0x4)
811 printk(KERN_ERR "%s: can't RESET %s card: %04x\n",dev->name,
812 cards[p->cardno].cardname,(int) i);
813 flags=claim_dma_lock();
814 disable_dma(dev->dma);
815 release_dma_lock(flags);
816 return 0;
819 p->rmdnum = p->tmdnum = p->tmdlast = p->tmdbouncenum = 0;
820 for(i=0;i<TMDNUM;i++)
822 struct tmd *tmdp = p->tmdhead + i;
823 #ifdef XMT_VIA_SKB
824 if(p->tmd_skb[i]) {
825 dev_kfree_skb(p->tmd_skb[i]);
826 p->tmd_skb[i] = NULL;
828 #endif
829 tmdp->u.buffer = 0x0;
830 tmdp->u.s.status = XMIT_START | XMIT_END;
831 tmdp->blen = tmdp->status2 = 0;
834 for(i=0;i<RMDNUM;i++)
836 struct rmd *rmdp = p->rmdhead + i;
837 #ifdef RCV_VIA_SKB
838 rmdp->u.buffer = (u32) isa_virt_to_bus(p->recv_skb[i]->data);
839 #else
840 rmdp->u.buffer = (u32) isa_virt_to_bus(p->recvbounce[i]);
841 #endif
842 rmdp->blen = -(R_BUF_SIZE-8);
843 rmdp->mlen = 0;
844 rmdp->u.s.status = RCV_OWN;
847 if(dev->flags & IFF_PROMISC)
848 ni65_init_lance(p,dev->dev_addr,0x00,M_PROM);
849 else if (netdev_mc_count(dev) || dev->flags & IFF_ALLMULTI)
850 ni65_init_lance(p,dev->dev_addr,0xff,0x0);
851 else
852 ni65_init_lance(p,dev->dev_addr,0x00,0x00);
855 * ni65_set_lance_mem() sets L_ADDRREG to CSR0
856 * NOW, WE WILL NEVER CHANGE THE L_ADDRREG, CSR0 IS ALWAYS SELECTED
859 if(inw(PORT+L_DATAREG) & CSR0_IDON) {
860 ni65_set_performance(p);
861 /* init OK: start lance , enable interrupts */
862 writedatareg(CSR0_CLRALL | CSR0_INEA | CSR0_STRT);
863 return 1; /* ->OK */
865 printk(KERN_ERR "%s: can't init lance, status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
866 flags=claim_dma_lock();
867 disable_dma(dev->dma);
868 release_dma_lock(flags);
869 return 0; /* ->Error */
873 * interrupt handler
875 static irqreturn_t ni65_interrupt(int irq, void * dev_id)
877 int csr0 = 0;
878 struct net_device *dev = dev_id;
879 struct priv *p;
880 int bcnt = 32;
882 p = dev->ml_priv;
884 spin_lock(&p->ring_lock);
886 while(--bcnt) {
887 csr0 = inw(PORT+L_DATAREG);
889 #if 0
890 writedatareg( (csr0 & CSR0_CLRALL) ); /* ack interrupts, disable int. */
891 #else
892 writedatareg( (csr0 & CSR0_CLRALL) | CSR0_INEA ); /* ack interrupts, interrupts enabled */
893 #endif
895 if(!(csr0 & (CSR0_ERR | CSR0_RINT | CSR0_TINT)))
896 break;
898 if(csr0 & CSR0_RINT) /* RECV-int? */
899 ni65_recv_intr(dev,csr0);
900 if(csr0 & CSR0_TINT) /* XMIT-int? */
901 ni65_xmit_intr(dev,csr0);
903 if(csr0 & CSR0_ERR)
905 if(debuglevel > 1)
906 printk(KERN_ERR "%s: general error: %04x.\n",dev->name,csr0);
907 if(csr0 & CSR0_BABL)
908 dev->stats.tx_errors++;
909 if(csr0 & CSR0_MISS) {
910 int i;
911 for(i=0;i<RMDNUM;i++)
912 printk("%02x ",p->rmdhead[i].u.s.status);
913 printk("\n");
914 dev->stats.rx_errors++;
916 if(csr0 & CSR0_MERR) {
917 if(debuglevel > 1)
918 printk(KERN_ERR "%s: Ooops .. memory error: %04x.\n",dev->name,csr0);
919 ni65_stop_start(dev,p);
924 #ifdef RCV_PARANOIA_CHECK
926 int j;
927 for(j=0;j<RMDNUM;j++)
929 int i, num2;
930 for(i=RMDNUM-1;i>0;i--) {
931 num2 = (p->rmdnum + i) & (RMDNUM-1);
932 if(!(p->rmdhead[num2].u.s.status & RCV_OWN))
933 break;
936 if(i) {
937 int k, num1;
938 for(k=0;k<RMDNUM;k++) {
939 num1 = (p->rmdnum + k) & (RMDNUM-1);
940 if(!(p->rmdhead[num1].u.s.status & RCV_OWN))
941 break;
943 if(!k)
944 break;
946 if(debuglevel > 0)
948 char buf[256],*buf1;
949 buf1 = buf;
950 for(k=0;k<RMDNUM;k++) {
951 sprintf(buf1,"%02x ",(p->rmdhead[k].u.s.status)); /* & RCV_OWN) ); */
952 buf1 += 3;
954 *buf1 = 0;
955 printk(KERN_ERR "%s: Ooops, receive ring corrupted %2d %2d | %s\n",dev->name,p->rmdnum,i,buf);
958 p->rmdnum = num1;
959 ni65_recv_intr(dev,csr0);
960 if((p->rmdhead[num2].u.s.status & RCV_OWN))
961 break; /* ok, we are 'in sync' again */
963 else
964 break;
967 #endif
969 if( (csr0 & (CSR0_RXON | CSR0_TXON)) != (CSR0_RXON | CSR0_TXON) ) {
970 printk(KERN_DEBUG "%s: RX or TX was offline -> restart\n",dev->name);
971 ni65_stop_start(dev,p);
973 else
974 writedatareg(CSR0_INEA);
976 spin_unlock(&p->ring_lock);
977 return IRQ_HANDLED;
981 * We have received an Xmit-Interrupt ..
982 * send a new packet if necessary
984 static void ni65_xmit_intr(struct net_device *dev,int csr0)
986 struct priv *p = dev->ml_priv;
988 while(p->xmit_queued)
990 struct tmd *tmdp = p->tmdhead + p->tmdlast;
991 int tmdstat = tmdp->u.s.status;
993 if(tmdstat & XMIT_OWN)
994 break;
996 if(tmdstat & XMIT_ERR)
998 #if 0
999 if(tmdp->status2 & XMIT_TDRMASK && debuglevel > 3)
1000 printk(KERN_ERR "%s: tdr-problems (e.g. no resistor)\n",dev->name);
1001 #endif
1002 /* checking some errors */
1003 if(tmdp->status2 & XMIT_RTRY)
1004 dev->stats.tx_aborted_errors++;
1005 if(tmdp->status2 & XMIT_LCAR)
1006 dev->stats.tx_carrier_errors++;
1007 if(tmdp->status2 & (XMIT_BUFF | XMIT_UFLO )) {
1008 /* this stops the xmitter */
1009 dev->stats.tx_fifo_errors++;
1010 if(debuglevel > 0)
1011 printk(KERN_ERR "%s: Xmit FIFO/BUFF error\n",dev->name);
1012 if(p->features & INIT_RING_BEFORE_START) {
1013 tmdp->u.s.status = XMIT_OWN | XMIT_START | XMIT_END; /* test: resend this frame */
1014 ni65_stop_start(dev,p);
1015 break; /* no more Xmit processing .. */
1017 else
1018 ni65_stop_start(dev,p);
1020 if(debuglevel > 2)
1021 printk(KERN_ERR "%s: xmit-error: %04x %02x-%04x\n",dev->name,csr0,(int) tmdstat,(int) tmdp->status2);
1022 if(!(csr0 & CSR0_BABL)) /* don't count errors twice */
1023 dev->stats.tx_errors++;
1024 tmdp->status2 = 0;
1026 else {
1027 dev->stats.tx_bytes -= (short)(tmdp->blen);
1028 dev->stats.tx_packets++;
1031 #ifdef XMT_VIA_SKB
1032 if(p->tmd_skb[p->tmdlast]) {
1033 dev_kfree_skb_irq(p->tmd_skb[p->tmdlast]);
1034 p->tmd_skb[p->tmdlast] = NULL;
1036 #endif
1038 p->tmdlast = (p->tmdlast + 1) & (TMDNUM-1);
1039 if(p->tmdlast == p->tmdnum)
1040 p->xmit_queued = 0;
1042 netif_wake_queue(dev);
1046 * We have received a packet
1048 static void ni65_recv_intr(struct net_device *dev,int csr0)
1050 struct rmd *rmdp;
1051 int rmdstat,len;
1052 int cnt=0;
1053 struct priv *p = dev->ml_priv;
1055 rmdp = p->rmdhead + p->rmdnum;
1056 while(!( (rmdstat = rmdp->u.s.status) & RCV_OWN))
1058 cnt++;
1059 if( (rmdstat & (RCV_START | RCV_END | RCV_ERR)) != (RCV_START | RCV_END) ) /* error or oversized? */
1061 if(!(rmdstat & RCV_ERR)) {
1062 if(rmdstat & RCV_START)
1064 dev->stats.rx_length_errors++;
1065 printk(KERN_ERR "%s: recv, packet too long: %d\n",dev->name,rmdp->mlen & 0x0fff);
1068 else {
1069 if(debuglevel > 2)
1070 printk(KERN_ERR "%s: receive-error: %04x, lance-status: %04x/%04x\n",
1071 dev->name,(int) rmdstat,csr0,(int) inw(PORT+L_DATAREG) );
1072 if(rmdstat & RCV_FRAM)
1073 dev->stats.rx_frame_errors++;
1074 if(rmdstat & RCV_OFLO)
1075 dev->stats.rx_over_errors++;
1076 if(rmdstat & RCV_CRC)
1077 dev->stats.rx_crc_errors++;
1078 if(rmdstat & RCV_BUF_ERR)
1079 dev->stats.rx_fifo_errors++;
1081 if(!(csr0 & CSR0_MISS)) /* don't count errors twice */
1082 dev->stats.rx_errors++;
1084 else if( (len = (rmdp->mlen & 0x0fff) - 4) >= 60)
1086 #ifdef RCV_VIA_SKB
1087 struct sk_buff *skb = alloc_skb(R_BUF_SIZE+2+16,GFP_ATOMIC);
1088 if (skb)
1089 skb_reserve(skb,16);
1090 #else
1091 struct sk_buff *skb = netdev_alloc_skb(dev, len + 2);
1092 #endif
1093 if(skb)
1095 skb_reserve(skb,2);
1096 #ifdef RCV_VIA_SKB
1097 if( (unsigned long) (skb->data + R_BUF_SIZE) > 0x1000000) {
1098 skb_put(skb,len);
1099 skb_copy_to_linear_data(skb, (unsigned char *)(p->recv_skb[p->rmdnum]->data),len);
1101 else {
1102 struct sk_buff *skb1 = p->recv_skb[p->rmdnum];
1103 skb_put(skb,R_BUF_SIZE);
1104 p->recv_skb[p->rmdnum] = skb;
1105 rmdp->u.buffer = (u32) isa_virt_to_bus(skb->data);
1106 skb = skb1;
1107 skb_trim(skb,len);
1109 #else
1110 skb_put(skb,len);
1111 skb_copy_to_linear_data(skb, (unsigned char *) p->recvbounce[p->rmdnum],len);
1112 #endif
1113 dev->stats.rx_packets++;
1114 dev->stats.rx_bytes += len;
1115 skb->protocol=eth_type_trans(skb,dev);
1116 netif_rx(skb);
1118 else
1120 printk(KERN_ERR "%s: can't alloc new sk_buff\n",dev->name);
1121 dev->stats.rx_dropped++;
1124 else {
1125 printk(KERN_INFO "%s: received runt packet\n",dev->name);
1126 dev->stats.rx_errors++;
1128 rmdp->blen = -(R_BUF_SIZE-8);
1129 rmdp->mlen = 0;
1130 rmdp->u.s.status = RCV_OWN; /* change owner */
1131 p->rmdnum = (p->rmdnum + 1) & (RMDNUM-1);
1132 rmdp = p->rmdhead + p->rmdnum;
1137 * kick xmitter ..
1140 static void ni65_timeout(struct net_device *dev)
1142 int i;
1143 struct priv *p = dev->ml_priv;
1145 printk(KERN_ERR "%s: xmitter timed out, try to restart!\n",dev->name);
1146 for(i=0;i<TMDNUM;i++)
1147 printk("%02x ",p->tmdhead[i].u.s.status);
1148 printk("\n");
1149 ni65_lance_reinit(dev);
1150 netif_trans_update(dev); /* prevent tx timeout */
1151 netif_wake_queue(dev);
1155 * Send a packet
1158 static netdev_tx_t ni65_send_packet(struct sk_buff *skb,
1159 struct net_device *dev)
1161 struct priv *p = dev->ml_priv;
1163 netif_stop_queue(dev);
1165 if (test_and_set_bit(0, (void*)&p->lock)) {
1166 printk(KERN_ERR "%s: Queue was locked.\n", dev->name);
1167 return NETDEV_TX_BUSY;
1171 short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
1172 struct tmd *tmdp;
1173 unsigned long flags;
1175 #ifdef XMT_VIA_SKB
1176 if( (unsigned long) (skb->data + skb->len) > 0x1000000) {
1177 #endif
1179 skb_copy_from_linear_data(skb, p->tmdbounce[p->tmdbouncenum],
1180 skb->len > T_BUF_SIZE ? T_BUF_SIZE :
1181 skb->len);
1182 if (len > skb->len)
1183 memset((char *)p->tmdbounce[p->tmdbouncenum]+skb->len, 0, len-skb->len);
1184 dev_kfree_skb (skb);
1186 spin_lock_irqsave(&p->ring_lock, flags);
1187 tmdp = p->tmdhead + p->tmdnum;
1188 tmdp->u.buffer = (u32) isa_virt_to_bus(p->tmdbounce[p->tmdbouncenum]);
1189 p->tmdbouncenum = (p->tmdbouncenum + 1) & (TMDNUM - 1);
1191 #ifdef XMT_VIA_SKB
1193 else {
1194 spin_lock_irqsave(&p->ring_lock, flags);
1196 tmdp = p->tmdhead + p->tmdnum;
1197 tmdp->u.buffer = (u32) isa_virt_to_bus(skb->data);
1198 p->tmd_skb[p->tmdnum] = skb;
1200 #endif
1201 tmdp->blen = -len;
1203 tmdp->u.s.status = XMIT_OWN | XMIT_START | XMIT_END;
1204 writedatareg(CSR0_TDMD | CSR0_INEA); /* enable xmit & interrupt */
1206 p->xmit_queued = 1;
1207 p->tmdnum = (p->tmdnum + 1) & (TMDNUM-1);
1209 if(p->tmdnum != p->tmdlast)
1210 netif_wake_queue(dev);
1212 p->lock = 0;
1214 spin_unlock_irqrestore(&p->ring_lock, flags);
1217 return NETDEV_TX_OK;
1220 static void set_multicast_list(struct net_device *dev)
1222 if(!ni65_lance_reinit(dev))
1223 printk(KERN_ERR "%s: Can't switch card into MC mode!\n",dev->name);
1224 netif_wake_queue(dev);
1227 #ifdef MODULE
1228 static struct net_device *dev_ni65;
1230 module_param(irq, int, 0);
1231 module_param(io, int, 0);
1232 module_param(dma, int, 0);
1233 MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)");
1234 MODULE_PARM_DESC(io, "ni6510 I/O base address");
1235 MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)");
1237 int __init init_module(void)
1239 dev_ni65 = ni65_probe(-1);
1240 return PTR_ERR_OR_ZERO(dev_ni65);
1243 void __exit cleanup_module(void)
1245 unregister_netdev(dev_ni65);
1246 cleanup_card(dev_ni65);
1247 free_netdev(dev_ni65);
1249 #endif /* MODULE */
1251 MODULE_LICENSE("GPL");