2 * Network device driver for the MACE ethernet controller on
3 * Apple Powermacs. Assumes it's under a DBDMA controller.
5 * Copyright (C) 1996 Paul Mackerras.
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/netdevice.h>
11 #include <linux/etherdevice.h>
12 #include <linux/delay.h>
13 #include <linux/string.h>
14 #include <linux/timer.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/crc32.h>
18 #include <linux/spinlock.h>
19 #include <linux/bitrev.h>
20 #include <linux/slab.h>
22 #include <asm/dbdma.h>
24 #include <asm/pgtable.h>
25 #include <asm/macio.h>
29 static int port_aaui
= -1;
33 #define MAX_TX_ACTIVE 1
34 #define NCMDS_TX 1 /* dma commands per element in tx ring */
35 #define RX_BUFLEN (ETH_FRAME_LEN + 8)
36 #define TX_TIMEOUT HZ /* 1 second */
38 /* Chip rev needs workaround on HW & multicast addr change */
39 #define BROKEN_ADDRCHG_REV 0x0941
41 /* Bits in transmit DMA status */
42 #define TX_DMA_ERR 0x80
45 volatile struct mace __iomem
*mace
;
46 volatile struct dbdma_regs __iomem
*tx_dma
;
48 volatile struct dbdma_regs __iomem
*rx_dma
;
50 volatile struct dbdma_cmd
*tx_cmds
; /* xmit dma command list */
51 volatile struct dbdma_cmd
*rx_cmds
; /* recv dma command list */
52 struct sk_buff
*rx_bufs
[N_RX_RING
];
55 struct sk_buff
*tx_bufs
[N_TX_RING
];
59 unsigned char tx_fullup
;
60 unsigned char tx_active
;
61 unsigned char tx_bad_runt
;
62 struct timer_list tx_timeout
;
66 struct macio_dev
*mdev
;
71 * Number of bytes of private data per MACE: allow enough for
72 * the rx and tx dma commands plus a branch dma command each,
73 * and another 16 bytes to allow us to align the dma command
74 * buffers on a 16 byte boundary.
76 #define PRIV_BYTES (sizeof(struct mace_data) \
77 + (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
79 static int mace_open(struct net_device
*dev
);
80 static int mace_close(struct net_device
*dev
);
81 static int mace_xmit_start(struct sk_buff
*skb
, struct net_device
*dev
);
82 static void mace_set_multicast(struct net_device
*dev
);
83 static void mace_reset(struct net_device
*dev
);
84 static int mace_set_address(struct net_device
*dev
, void *addr
);
85 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
);
86 static irqreturn_t
mace_txdma_intr(int irq
, void *dev_id
);
87 static irqreturn_t
mace_rxdma_intr(int irq
, void *dev_id
);
88 static void mace_set_timeout(struct net_device
*dev
);
89 static void mace_tx_timeout(unsigned long data
);
90 static inline void dbdma_reset(volatile struct dbdma_regs __iomem
*dma
);
91 static inline void mace_clean_rings(struct mace_data
*mp
);
92 static void __mace_set_address(struct net_device
*dev
, void *addr
);
95 * If we can't get a skbuff when we need it, we use this area for DMA.
97 static unsigned char *dummy_buf
;
99 static const struct net_device_ops mace_netdev_ops
= {
100 .ndo_open
= mace_open
,
101 .ndo_stop
= mace_close
,
102 .ndo_start_xmit
= mace_xmit_start
,
103 .ndo_set_rx_mode
= mace_set_multicast
,
104 .ndo_set_mac_address
= mace_set_address
,
105 .ndo_validate_addr
= eth_validate_addr
,
108 static int mace_probe(struct macio_dev
*mdev
, const struct of_device_id
*match
)
110 struct device_node
*mace
= macio_get_of_node(mdev
);
111 struct net_device
*dev
;
112 struct mace_data
*mp
;
113 const unsigned char *addr
;
114 int j
, rev
, rc
= -EBUSY
;
116 if (macio_resource_count(mdev
) != 3 || macio_irq_count(mdev
) != 3) {
117 printk(KERN_ERR
"can't use MACE %s: need 3 addrs and 3 irqs\n",
122 addr
= of_get_property(mace
, "mac-address", NULL
);
124 addr
= of_get_property(mace
, "local-mac-address", NULL
);
126 printk(KERN_ERR
"Can't get mac-address for MACE %s\n",
133 * lazy allocate the driver-wide dummy buffer. (Note that we
134 * never have more than one MACE in the system anyway)
136 if (dummy_buf
== NULL
) {
137 dummy_buf
= kmalloc(RX_BUFLEN
+2, GFP_KERNEL
);
138 if (dummy_buf
== NULL
)
142 if (macio_request_resources(mdev
, "mace")) {
143 printk(KERN_ERR
"MACE: can't request IO resources !\n");
147 dev
= alloc_etherdev(PRIV_BYTES
);
152 SET_NETDEV_DEV(dev
, &mdev
->ofdev
.dev
);
154 mp
= netdev_priv(dev
);
156 macio_set_drvdata(mdev
, dev
);
158 dev
->base_addr
= macio_resource_start(mdev
, 0);
159 mp
->mace
= ioremap(dev
->base_addr
, 0x1000);
160 if (mp
->mace
== NULL
) {
161 printk(KERN_ERR
"MACE: can't map IO resources !\n");
165 dev
->irq
= macio_irq(mdev
, 0);
167 rev
= addr
[0] == 0 && addr
[1] == 0xA0;
168 for (j
= 0; j
< 6; ++j
) {
169 dev
->dev_addr
[j
] = rev
? bitrev8(addr
[j
]): addr
[j
];
171 mp
->chipid
= (in_8(&mp
->mace
->chipid_hi
) << 8) |
172 in_8(&mp
->mace
->chipid_lo
);
175 mp
= netdev_priv(dev
);
176 mp
->maccc
= ENXMT
| ENRCV
;
178 mp
->tx_dma
= ioremap(macio_resource_start(mdev
, 1), 0x1000);
179 if (mp
->tx_dma
== NULL
) {
180 printk(KERN_ERR
"MACE: can't map TX DMA resources !\n");
184 mp
->tx_dma_intr
= macio_irq(mdev
, 1);
186 mp
->rx_dma
= ioremap(macio_resource_start(mdev
, 2), 0x1000);
187 if (mp
->rx_dma
== NULL
) {
188 printk(KERN_ERR
"MACE: can't map RX DMA resources !\n");
190 goto err_unmap_tx_dma
;
192 mp
->rx_dma_intr
= macio_irq(mdev
, 2);
194 mp
->tx_cmds
= (volatile struct dbdma_cmd
*) DBDMA_ALIGN(mp
+ 1);
195 mp
->rx_cmds
= mp
->tx_cmds
+ NCMDS_TX
* N_TX_RING
+ 1;
197 memset((char *) mp
->tx_cmds
, 0,
198 (NCMDS_TX
*N_TX_RING
+ N_RX_RING
+ 2) * sizeof(struct dbdma_cmd
));
199 init_timer(&mp
->tx_timeout
);
200 spin_lock_init(&mp
->lock
);
201 mp
->timeout_active
= 0;
204 mp
->port_aaui
= port_aaui
;
206 /* Apple Network Server uses the AAUI port */
207 if (of_machine_is_compatible("AAPL,ShinerESB"))
210 #ifdef CONFIG_MACE_AAUI_PORT
218 dev
->netdev_ops
= &mace_netdev_ops
;
221 * Most of what is below could be moved to mace_open()
225 rc
= request_irq(dev
->irq
, mace_interrupt
, 0, "MACE", dev
);
227 printk(KERN_ERR
"MACE: can't get irq %d\n", dev
->irq
);
228 goto err_unmap_rx_dma
;
230 rc
= request_irq(mp
->tx_dma_intr
, mace_txdma_intr
, 0, "MACE-txdma", dev
);
232 printk(KERN_ERR
"MACE: can't get irq %d\n", mp
->tx_dma_intr
);
235 rc
= request_irq(mp
->rx_dma_intr
, mace_rxdma_intr
, 0, "MACE-rxdma", dev
);
237 printk(KERN_ERR
"MACE: can't get irq %d\n", mp
->rx_dma_intr
);
238 goto err_free_tx_irq
;
241 rc
= register_netdev(dev
);
243 printk(KERN_ERR
"MACE: Cannot register net device, aborting.\n");
244 goto err_free_rx_irq
;
247 printk(KERN_INFO
"%s: MACE at %pM, chip revision %d.%d\n",
248 dev
->name
, dev
->dev_addr
,
249 mp
->chipid
>> 8, mp
->chipid
& 0xff);
254 free_irq(macio_irq(mdev
, 2), dev
);
256 free_irq(macio_irq(mdev
, 1), dev
);
258 free_irq(macio_irq(mdev
, 0), dev
);
268 macio_release_resources(mdev
);
273 static int mace_remove(struct macio_dev
*mdev
)
275 struct net_device
*dev
= macio_get_drvdata(mdev
);
276 struct mace_data
*mp
;
280 macio_set_drvdata(mdev
, NULL
);
282 mp
= netdev_priv(dev
);
284 unregister_netdev(dev
);
286 free_irq(dev
->irq
, dev
);
287 free_irq(mp
->tx_dma_intr
, dev
);
288 free_irq(mp
->rx_dma_intr
, dev
);
296 macio_release_resources(mdev
);
301 static void dbdma_reset(volatile struct dbdma_regs __iomem
*dma
)
305 out_le32(&dma
->control
, (WAKE
|FLUSH
|PAUSE
|RUN
) << 16);
308 * Yes this looks peculiar, but apparently it needs to be this
309 * way on some machines.
311 for (i
= 200; i
> 0; --i
)
312 if (le32_to_cpu(dma
->control
) & RUN
)
316 static void mace_reset(struct net_device
*dev
)
318 struct mace_data
*mp
= netdev_priv(dev
);
319 volatile struct mace __iomem
*mb
= mp
->mace
;
322 /* soft-reset the chip */
325 out_8(&mb
->biucc
, SWRST
);
326 if (in_8(&mb
->biucc
) & SWRST
) {
333 printk(KERN_ERR
"mace: cannot reset chip!\n");
337 out_8(&mb
->imr
, 0xff); /* disable all intrs for now */
339 out_8(&mb
->maccc
, 0); /* turn off tx, rx */
341 out_8(&mb
->biucc
, XMTSP_64
);
342 out_8(&mb
->utr
, RTRD
);
343 out_8(&mb
->fifocc
, RCVFW_32
| XMTFW_16
| XMTFWU
| RCVFWU
| XMTBRST
);
344 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
); /* auto-pad short frames */
345 out_8(&mb
->rcvfc
, 0);
347 /* load up the hardware address */
348 __mace_set_address(dev
, dev
->dev_addr
);
350 /* clear the multicast filter */
351 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
352 out_8(&mb
->iac
, LOGADDR
);
354 out_8(&mb
->iac
, ADDRCHG
| LOGADDR
);
355 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
358 for (i
= 0; i
< 8; ++i
)
359 out_8(&mb
->ladrf
, 0);
361 /* done changing address */
362 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
366 out_8(&mb
->plscc
, PORTSEL_AUI
+ ENPLSIO
);
368 out_8(&mb
->plscc
, PORTSEL_GPSI
+ ENPLSIO
);
371 static void __mace_set_address(struct net_device
*dev
, void *addr
)
373 struct mace_data
*mp
= netdev_priv(dev
);
374 volatile struct mace __iomem
*mb
= mp
->mace
;
375 unsigned char *p
= addr
;
378 /* load up the hardware address */
379 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
380 out_8(&mb
->iac
, PHYADDR
);
382 out_8(&mb
->iac
, ADDRCHG
| PHYADDR
);
383 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
386 for (i
= 0; i
< 6; ++i
)
387 out_8(&mb
->padr
, dev
->dev_addr
[i
] = p
[i
]);
388 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
392 static int mace_set_address(struct net_device
*dev
, void *addr
)
394 struct mace_data
*mp
= netdev_priv(dev
);
395 volatile struct mace __iomem
*mb
= mp
->mace
;
398 spin_lock_irqsave(&mp
->lock
, flags
);
400 __mace_set_address(dev
, addr
);
402 /* note: setting ADDRCHG clears ENRCV */
403 out_8(&mb
->maccc
, mp
->maccc
);
405 spin_unlock_irqrestore(&mp
->lock
, flags
);
409 static inline void mace_clean_rings(struct mace_data
*mp
)
413 /* free some skb's */
414 for (i
= 0; i
< N_RX_RING
; ++i
) {
415 if (mp
->rx_bufs
[i
] != NULL
) {
416 dev_kfree_skb(mp
->rx_bufs
[i
]);
417 mp
->rx_bufs
[i
] = NULL
;
420 for (i
= mp
->tx_empty
; i
!= mp
->tx_fill
; ) {
421 dev_kfree_skb(mp
->tx_bufs
[i
]);
422 if (++i
>= N_TX_RING
)
427 static int mace_open(struct net_device
*dev
)
429 struct mace_data
*mp
= netdev_priv(dev
);
430 volatile struct mace __iomem
*mb
= mp
->mace
;
431 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
432 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
433 volatile struct dbdma_cmd
*cp
;
441 /* initialize list of sk_buffs for receiving and set up recv dma */
442 mace_clean_rings(mp
);
443 memset((char *)mp
->rx_cmds
, 0, N_RX_RING
* sizeof(struct dbdma_cmd
));
445 for (i
= 0; i
< N_RX_RING
- 1; ++i
) {
446 skb
= netdev_alloc_skb(dev
, RX_BUFLEN
+ 2);
450 skb_reserve(skb
, 2); /* so IP header lands on 4-byte bdry */
453 mp
->rx_bufs
[i
] = skb
;
454 cp
->req_count
= cpu_to_le16(RX_BUFLEN
);
455 cp
->command
= cpu_to_le16(INPUT_LAST
+ INTR_ALWAYS
);
456 cp
->phy_addr
= cpu_to_le32(virt_to_bus(data
));
460 mp
->rx_bufs
[i
] = NULL
;
461 cp
->command
= cpu_to_le16(DBDMA_STOP
);
465 /* Put a branch back to the beginning of the receive command list */
467 cp
->command
= cpu_to_le16(DBDMA_NOP
+ BR_ALWAYS
);
468 cp
->cmd_dep
= cpu_to_le32(virt_to_bus(mp
->rx_cmds
));
471 out_le32(&rd
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
472 out_le32(&rd
->cmdptr
, virt_to_bus(mp
->rx_cmds
));
473 out_le32(&rd
->control
, (RUN
<< 16) | RUN
);
475 /* put a branch at the end of the tx command list */
476 cp
= mp
->tx_cmds
+ NCMDS_TX
* N_TX_RING
;
477 cp
->command
= cpu_to_le16(DBDMA_NOP
+ BR_ALWAYS
);
478 cp
->cmd_dep
= cpu_to_le32(virt_to_bus(mp
->tx_cmds
));
481 out_le32(&td
->control
, (RUN
|PAUSE
|FLUSH
|WAKE
) << 16);
482 out_le32(&td
->cmdptr
, virt_to_bus(mp
->tx_cmds
));
490 out_8(&mb
->maccc
, mp
->maccc
);
491 /* enable all interrupts except receive interrupts */
492 out_8(&mb
->imr
, RCVINT
);
497 static int mace_close(struct net_device
*dev
)
499 struct mace_data
*mp
= netdev_priv(dev
);
500 volatile struct mace __iomem
*mb
= mp
->mace
;
501 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
502 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
504 /* disable rx and tx */
505 out_8(&mb
->maccc
, 0);
506 out_8(&mb
->imr
, 0xff); /* disable all intrs */
508 /* disable rx and tx dma */
509 rd
->control
= cpu_to_le32((RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
510 td
->control
= cpu_to_le32((RUN
|PAUSE
|FLUSH
|WAKE
) << 16); /* clear run bit */
512 mace_clean_rings(mp
);
517 static inline void mace_set_timeout(struct net_device
*dev
)
519 struct mace_data
*mp
= netdev_priv(dev
);
521 if (mp
->timeout_active
)
522 del_timer(&mp
->tx_timeout
);
523 mp
->tx_timeout
.expires
= jiffies
+ TX_TIMEOUT
;
524 mp
->tx_timeout
.function
= mace_tx_timeout
;
525 mp
->tx_timeout
.data
= (unsigned long) dev
;
526 add_timer(&mp
->tx_timeout
);
527 mp
->timeout_active
= 1;
530 static int mace_xmit_start(struct sk_buff
*skb
, struct net_device
*dev
)
532 struct mace_data
*mp
= netdev_priv(dev
);
533 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
534 volatile struct dbdma_cmd
*cp
, *np
;
538 /* see if there's a free slot in the tx ring */
539 spin_lock_irqsave(&mp
->lock
, flags
);
542 if (next
>= N_TX_RING
)
544 if (next
== mp
->tx_empty
) {
545 netif_stop_queue(dev
);
547 spin_unlock_irqrestore(&mp
->lock
, flags
);
548 return NETDEV_TX_BUSY
; /* can't take it at the moment */
550 spin_unlock_irqrestore(&mp
->lock
, flags
);
552 /* partially fill in the dma command block */
554 if (len
> ETH_FRAME_LEN
) {
555 printk(KERN_DEBUG
"mace: xmit frame too long (%d)\n", len
);
558 mp
->tx_bufs
[fill
] = skb
;
559 cp
= mp
->tx_cmds
+ NCMDS_TX
* fill
;
560 cp
->req_count
= cpu_to_le16(len
);
561 cp
->phy_addr
= cpu_to_le32(virt_to_bus(skb
->data
));
563 np
= mp
->tx_cmds
+ NCMDS_TX
* next
;
564 out_le16(&np
->command
, DBDMA_STOP
);
566 /* poke the tx dma channel */
567 spin_lock_irqsave(&mp
->lock
, flags
);
569 if (!mp
->tx_bad_runt
&& mp
->tx_active
< MAX_TX_ACTIVE
) {
570 out_le16(&cp
->xfer_status
, 0);
571 out_le16(&cp
->command
, OUTPUT_LAST
);
572 out_le32(&td
->control
, ((RUN
|WAKE
) << 16) + (RUN
|WAKE
));
574 mace_set_timeout(dev
);
576 if (++next
>= N_TX_RING
)
578 if (next
== mp
->tx_empty
)
579 netif_stop_queue(dev
);
580 spin_unlock_irqrestore(&mp
->lock
, flags
);
585 static void mace_set_multicast(struct net_device
*dev
)
587 struct mace_data
*mp
= netdev_priv(dev
);
588 volatile struct mace __iomem
*mb
= mp
->mace
;
593 spin_lock_irqsave(&mp
->lock
, flags
);
595 if (dev
->flags
& IFF_PROMISC
) {
598 unsigned char multicast_filter
[8];
599 struct netdev_hw_addr
*ha
;
601 if (dev
->flags
& IFF_ALLMULTI
) {
602 for (i
= 0; i
< 8; i
++)
603 multicast_filter
[i
] = 0xff;
605 for (i
= 0; i
< 8; i
++)
606 multicast_filter
[i
] = 0;
607 netdev_for_each_mc_addr(ha
, dev
) {
608 crc
= ether_crc_le(6, ha
->addr
);
609 i
= crc
>> 26; /* bit number in multicast_filter */
610 multicast_filter
[i
>> 3] |= 1 << (i
& 7);
614 printk("Multicast filter :");
615 for (i
= 0; i
< 8; i
++)
616 printk("%02x ", multicast_filter
[i
]);
620 if (mp
->chipid
== BROKEN_ADDRCHG_REV
)
621 out_8(&mb
->iac
, LOGADDR
);
623 out_8(&mb
->iac
, ADDRCHG
| LOGADDR
);
624 while ((in_8(&mb
->iac
) & ADDRCHG
) != 0)
627 for (i
= 0; i
< 8; ++i
)
628 out_8(&mb
->ladrf
, multicast_filter
[i
]);
629 if (mp
->chipid
!= BROKEN_ADDRCHG_REV
)
633 out_8(&mb
->maccc
, mp
->maccc
);
634 spin_unlock_irqrestore(&mp
->lock
, flags
);
637 static void mace_handle_misc_intrs(struct mace_data
*mp
, int intr
, struct net_device
*dev
)
639 volatile struct mace __iomem
*mb
= mp
->mace
;
640 static int mace_babbles
, mace_jabbers
;
643 dev
->stats
.rx_missed_errors
+= 256;
644 dev
->stats
.rx_missed_errors
+= in_8(&mb
->mpc
); /* reading clears it */
646 dev
->stats
.rx_length_errors
+= 256;
647 dev
->stats
.rx_length_errors
+= in_8(&mb
->rntpc
); /* reading clears it */
649 ++dev
->stats
.tx_heartbeat_errors
;
651 if (mace_babbles
++ < 4)
652 printk(KERN_DEBUG
"mace: babbling transmitter\n");
654 if (mace_jabbers
++ < 4)
655 printk(KERN_DEBUG
"mace: jabbering transceiver\n");
658 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
)
660 struct net_device
*dev
= (struct net_device
*) dev_id
;
661 struct mace_data
*mp
= netdev_priv(dev
);
662 volatile struct mace __iomem
*mb
= mp
->mace
;
663 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
664 volatile struct dbdma_cmd
*cp
;
665 int intr
, fs
, i
, stat
, x
;
668 /* static int mace_last_fs, mace_last_xcount; */
670 spin_lock_irqsave(&mp
->lock
, flags
);
671 intr
= in_8(&mb
->ir
); /* read interrupt register */
672 in_8(&mb
->xmtrc
); /* get retries */
673 mace_handle_misc_intrs(mp
, intr
, dev
);
676 while (in_8(&mb
->pr
) & XMTSV
) {
677 del_timer(&mp
->tx_timeout
);
678 mp
->timeout_active
= 0;
680 * Clear any interrupt indication associated with this status
681 * word. This appears to unlatch any error indication from
682 * the DMA controller.
684 intr
= in_8(&mb
->ir
);
686 mace_handle_misc_intrs(mp
, intr
, dev
);
687 if (mp
->tx_bad_runt
) {
688 fs
= in_8(&mb
->xmtfs
);
690 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
);
693 dstat
= le32_to_cpu(td
->status
);
694 /* stop DMA controller */
695 out_le32(&td
->control
, RUN
<< 16);
697 * xcount is the number of complete frames which have been
698 * written to the fifo but for which status has not been read.
700 xcount
= (in_8(&mb
->fifofc
) >> XMTFC_SH
) & XMTFC_MASK
;
701 if (xcount
== 0 || (dstat
& DEAD
)) {
703 * If a packet was aborted before the DMA controller has
704 * finished transferring it, it seems that there are 2 bytes
705 * which are stuck in some buffer somewhere. These will get
706 * transmitted as soon as we read the frame status (which
707 * reenables the transmit data transfer request). Turning
708 * off the DMA controller and/or resetting the MACE doesn't
709 * help. So we disable auto-padding and FCS transmission
710 * so the two bytes will only be a runt packet which should
711 * be ignored by other stations.
713 out_8(&mb
->xmtfc
, DXMTFCS
);
715 fs
= in_8(&mb
->xmtfs
);
716 if ((fs
& XMTSV
) == 0) {
717 printk(KERN_ERR
"mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n",
721 * XXX mace likes to hang the machine after a xmtfs error.
722 * This is hard to reproduce, resetting *may* help
725 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
726 stat
= le16_to_cpu(cp
->xfer_status
);
727 if ((fs
& (UFLO
|LCOL
|LCAR
|RTRY
)) || (dstat
& DEAD
) || xcount
== 0) {
729 * Check whether there were in fact 2 bytes written to
733 x
= (in_8(&mb
->fifofc
) >> XMTFC_SH
) & XMTFC_MASK
;
735 /* there were two bytes with an end-of-packet indication */
737 mace_set_timeout(dev
);
740 * Either there weren't the two bytes buffered up, or they
741 * didn't have an end-of-packet indication.
742 * We flush the transmit FIFO just in case (by setting the
743 * XMTFWU bit with the transmitter disabled).
745 out_8(&mb
->maccc
, in_8(&mb
->maccc
) & ~ENXMT
);
746 out_8(&mb
->fifocc
, in_8(&mb
->fifocc
) | XMTFWU
);
748 out_8(&mb
->maccc
, in_8(&mb
->maccc
) | ENXMT
);
749 out_8(&mb
->xmtfc
, AUTO_PAD_XMIT
);
752 /* dma should have finished */
753 if (i
== mp
->tx_fill
) {
754 printk(KERN_DEBUG
"mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n",
759 if (fs
& (UFLO
|LCOL
|LCAR
|RTRY
)) {
760 ++dev
->stats
.tx_errors
;
762 ++dev
->stats
.tx_carrier_errors
;
763 if (fs
& (UFLO
|LCOL
|RTRY
))
764 ++dev
->stats
.tx_aborted_errors
;
766 dev
->stats
.tx_bytes
+= mp
->tx_bufs
[i
]->len
;
767 ++dev
->stats
.tx_packets
;
769 dev_kfree_skb_irq(mp
->tx_bufs
[i
]);
771 if (++i
>= N_TX_RING
)
775 mace_last_xcount
= xcount
;
779 if (i
!= mp
->tx_empty
) {
781 netif_wake_queue(dev
);
787 if (!mp
->tx_bad_runt
&& i
!= mp
->tx_fill
&& mp
->tx_active
< MAX_TX_ACTIVE
) {
789 /* set up the next one */
790 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
791 out_le16(&cp
->xfer_status
, 0);
792 out_le16(&cp
->command
, OUTPUT_LAST
);
794 if (++i
>= N_TX_RING
)
796 } while (i
!= mp
->tx_fill
&& mp
->tx_active
< MAX_TX_ACTIVE
);
797 out_le32(&td
->control
, ((RUN
|WAKE
) << 16) + (RUN
|WAKE
));
798 mace_set_timeout(dev
);
800 spin_unlock_irqrestore(&mp
->lock
, flags
);
804 static void mace_tx_timeout(unsigned long data
)
806 struct net_device
*dev
= (struct net_device
*) data
;
807 struct mace_data
*mp
= netdev_priv(dev
);
808 volatile struct mace __iomem
*mb
= mp
->mace
;
809 volatile struct dbdma_regs __iomem
*td
= mp
->tx_dma
;
810 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
811 volatile struct dbdma_cmd
*cp
;
815 spin_lock_irqsave(&mp
->lock
, flags
);
816 mp
->timeout_active
= 0;
817 if (mp
->tx_active
== 0 && !mp
->tx_bad_runt
)
820 /* update various counters */
821 mace_handle_misc_intrs(mp
, in_8(&mb
->ir
), dev
);
823 cp
= mp
->tx_cmds
+ NCMDS_TX
* mp
->tx_empty
;
825 /* turn off both tx and rx and reset the chip */
826 out_8(&mb
->maccc
, 0);
827 printk(KERN_ERR
"mace: transmit timeout - resetting\n");
832 cp
= bus_to_virt(le32_to_cpu(rd
->cmdptr
));
834 out_le16(&cp
->xfer_status
, 0);
835 out_le32(&rd
->cmdptr
, virt_to_bus(cp
));
836 out_le32(&rd
->control
, (RUN
<< 16) | RUN
);
838 /* fix up the transmit side */
841 ++dev
->stats
.tx_errors
;
842 if (mp
->tx_bad_runt
) {
844 } else if (i
!= mp
->tx_fill
) {
845 dev_kfree_skb(mp
->tx_bufs
[i
]);
846 if (++i
>= N_TX_RING
)
851 netif_wake_queue(dev
);
852 if (i
!= mp
->tx_fill
) {
853 cp
= mp
->tx_cmds
+ NCMDS_TX
* i
;
854 out_le16(&cp
->xfer_status
, 0);
855 out_le16(&cp
->command
, OUTPUT_LAST
);
856 out_le32(&td
->cmdptr
, virt_to_bus(cp
));
857 out_le32(&td
->control
, (RUN
<< 16) | RUN
);
859 mace_set_timeout(dev
);
862 /* turn it back on */
863 out_8(&mb
->imr
, RCVINT
);
864 out_8(&mb
->maccc
, mp
->maccc
);
867 spin_unlock_irqrestore(&mp
->lock
, flags
);
870 static irqreturn_t
mace_txdma_intr(int irq
, void *dev_id
)
875 static irqreturn_t
mace_rxdma_intr(int irq
, void *dev_id
)
877 struct net_device
*dev
= (struct net_device
*) dev_id
;
878 struct mace_data
*mp
= netdev_priv(dev
);
879 volatile struct dbdma_regs __iomem
*rd
= mp
->rx_dma
;
880 volatile struct dbdma_cmd
*cp
, *np
;
881 int i
, nb
, stat
, next
;
883 unsigned frame_status
;
884 static int mace_lost_status
;
888 spin_lock_irqsave(&mp
->lock
, flags
);
889 for (i
= mp
->rx_empty
; i
!= mp
->rx_fill
; ) {
890 cp
= mp
->rx_cmds
+ i
;
891 stat
= le16_to_cpu(cp
->xfer_status
);
892 if ((stat
& ACTIVE
) == 0) {
894 if (next
>= N_RX_RING
)
896 np
= mp
->rx_cmds
+ next
;
897 if (next
!= mp
->rx_fill
&&
898 (le16_to_cpu(np
->xfer_status
) & ACTIVE
) != 0) {
899 printk(KERN_DEBUG
"mace: lost a status word\n");
904 nb
= le16_to_cpu(cp
->req_count
) - le16_to_cpu(cp
->res_count
);
905 out_le16(&cp
->command
, DBDMA_STOP
);
906 /* got a packet, have a look at it */
907 skb
= mp
->rx_bufs
[i
];
909 ++dev
->stats
.rx_dropped
;
912 frame_status
= (data
[nb
-3] << 8) + data
[nb
-4];
913 if (frame_status
& (RS_OFLO
|RS_CLSN
|RS_FRAMERR
|RS_FCSERR
)) {
914 ++dev
->stats
.rx_errors
;
915 if (frame_status
& RS_OFLO
)
916 ++dev
->stats
.rx_over_errors
;
917 if (frame_status
& RS_FRAMERR
)
918 ++dev
->stats
.rx_frame_errors
;
919 if (frame_status
& RS_FCSERR
)
920 ++dev
->stats
.rx_crc_errors
;
922 /* Mace feature AUTO_STRIP_RCV is on by default, dropping the
923 * FCS on frames with 802.3 headers. This means that Ethernet
924 * frames have 8 extra octets at the end, while 802.3 frames
925 * have only 4. We need to correctly account for this. */
926 if (*(unsigned short *)(data
+12) < 1536) /* 802.3 header */
928 else /* Ethernet header; mace includes FCS */
931 skb
->protocol
= eth_type_trans(skb
, dev
);
932 dev
->stats
.rx_bytes
+= skb
->len
;
934 mp
->rx_bufs
[i
] = NULL
;
935 ++dev
->stats
.rx_packets
;
938 ++dev
->stats
.rx_errors
;
939 ++dev
->stats
.rx_length_errors
;
942 /* advance to next */
943 if (++i
>= N_RX_RING
)
951 if (next
>= N_RX_RING
)
953 if (next
== mp
->rx_empty
)
955 cp
= mp
->rx_cmds
+ i
;
956 skb
= mp
->rx_bufs
[i
];
958 skb
= netdev_alloc_skb(dev
, RX_BUFLEN
+ 2);
961 mp
->rx_bufs
[i
] = skb
;
964 cp
->req_count
= cpu_to_le16(RX_BUFLEN
);
965 data
= skb
? skb
->data
: dummy_buf
;
966 cp
->phy_addr
= cpu_to_le32(virt_to_bus(data
));
967 out_le16(&cp
->xfer_status
, 0);
968 out_le16(&cp
->command
, INPUT_LAST
+ INTR_ALWAYS
);
970 if ((le32_to_cpu(rd
->status
) & ACTIVE
) != 0) {
971 out_le32(&rd
->control
, (PAUSE
<< 16) | PAUSE
);
972 while ((in_le32(&rd
->status
) & ACTIVE
) != 0)
978 if (i
!= mp
->rx_fill
) {
979 out_le32(&rd
->control
, ((RUN
|WAKE
) << 16) | (RUN
|WAKE
));
982 spin_unlock_irqrestore(&mp
->lock
, flags
);
986 static const struct of_device_id mace_match
[] =
993 MODULE_DEVICE_TABLE (of
, mace_match
);
995 static struct macio_driver mace_driver
=
999 .owner
= THIS_MODULE
,
1000 .of_match_table
= mace_match
,
1002 .probe
= mace_probe
,
1003 .remove
= mace_remove
,
1007 static int __init
mace_init(void)
1009 return macio_register_driver(&mace_driver
);
1012 static void __exit
mace_cleanup(void)
1014 macio_unregister_driver(&mace_driver
);
1020 MODULE_AUTHOR("Paul Mackerras");
1021 MODULE_DESCRIPTION("PowerMac MACE driver.");
1022 module_param(port_aaui
, int, 0);
1023 MODULE_PARM_DESC(port_aaui
, "MACE uses AAUI port (0-1)");
1024 MODULE_LICENSE("GPL");
1026 module_init(mace_init
);
1027 module_exit(mace_cleanup
);