x86/mm/pat: Don't report PAT on CPUs that don't support it

[linux/fpc-iii.git] / drivers / net / ethernet / intel / e1000e / ich8lan.c

/* Intel PRO/1000 Linux driver
 * Copyright(c) 1999 - 2015 Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * The full GNU General Public License is included in this distribution in
 * the file called "COPYING".
 *
 * Contact Information:
 * Linux NICS <linux.nics@intel.com>
 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 */

/* 82562G 10/100 Network Connection
 * 82562G-2 10/100 Network Connection
 * 82562GT 10/100 Network Connection
 * 82562GT-2 10/100 Network Connection
 * 82562V 10/100 Network Connection
 * 82562V-2 10/100 Network Connection
 * 82566DC-2 Gigabit Network Connection
 * 82566DC Gigabit Network Connection
 * 82566DM-2 Gigabit Network Connection
 * 82566DM Gigabit Network Connection
 * 82566MC Gigabit Network Connection
 * 82566MM Gigabit Network Connection
 * 82567LM Gigabit Network Connection
 * 82567LF Gigabit Network Connection
 * 82567V Gigabit Network Connection
 * 82567LM-2 Gigabit Network Connection
 * 82567LF-2 Gigabit Network Connection
 * 82567V-2 Gigabit Network Connection
 * 82567LF-3 Gigabit Network Connection
 * 82567LM-3 Gigabit Network Connection
 * 82567LM-4 Gigabit Network Connection
 * 82577LM Gigabit Network Connection
 * 82577LC Gigabit Network Connection
 * 82578DM Gigabit Network Connection
 * 82578DC Gigabit Network Connection
 * 82579LM Gigabit Network Connection
 * 82579V Gigabit Network Connection
 * Ethernet Connection I217-LM
 * Ethernet Connection I217-V
 * Ethernet Connection I218-V
 * Ethernet Connection I218-LM
 * Ethernet Connection (2) I218-LM
 * Ethernet Connection (2) I218-V
 * Ethernet Connection (3) I218-LM
 * Ethernet Connection (3) I218-V
 */

#include "e1000.h"

/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
        struct ich8_hsfsts {
                u16 flcdone:1;  /* bit 0 Flash Cycle Done */
                u16 flcerr:1;   /* bit 1 Flash Cycle Error */
                u16 dael:1;     /* bit 2 Direct Access error Log */
                u16 berasesz:2; /* bit 4:3 Sector Erase Size */
                u16 flcinprog:1;        /* bit 5 flash cycle in Progress */
                u16 reserved1:2;        /* bit 13:6 Reserved */
                u16 reserved2:6;        /* bit 13:6 Reserved */
                u16 fldesvalid:1;       /* bit 14 Flash Descriptor Valid */
                u16 flockdn:1;  /* bit 15 Flash Config Lock-Down */
        } hsf_status;
        u16 regval;
};

/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
        struct ich8_hsflctl {
                u16 flcgo:1;    /* 0 Flash Cycle Go */
                u16 flcycle:2;  /* 2:1 Flash Cycle */
                u16 reserved:5; /* 7:3 Reserved  */
                u16 fldbcount:2;        /* 9:8 Flash Data Byte Count */
                u16 flockdn:6;  /* 15:10 Reserved */
        } hsf_ctrl;
        u16 regval;
};

/* ICH Flash Region Access Permissions */
union ich8_hws_flash_regacc {
        struct ich8_flracc {
                u32 grra:8;     /* 0:7 GbE region Read Access */
                u32 grwa:8;     /* 8:15 GbE region Write Access */
                u32 gmrag:8;    /* 23:16 GbE Master Read Access Grant */
                u32 gmwag:8;    /* 31:24 GbE Master Write Access Grant */
        } hsf_flregacc;
        u16 regval;
};

/* ICH Flash Protected Region */
union ich8_flash_protected_range {
        struct ich8_pr {
                u32 base:13;    /* 0:12 Protected Range Base */
                u32 reserved1:2;        /* 13:14 Reserved */
                u32 rpe:1;      /* 15 Read Protection Enable */
                u32 limit:13;   /* 16:28 Protected Range Limit */
                u32 reserved2:2;        /* 29:30 Reserved */
                u32 wpe:1;      /* 31 Write Protection Enable */
        } range;
        u32 regval;
};

static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
                                                u32 offset, u8 byte);
static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
                                         u8 *data);
static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
                                         u16 *data);
static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
                                         u8 size, u16 *data);
static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
                                           u32 *data);
static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw,
                                          u32 offset, u32 *data);
static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw,
                                            u32 offset, u32 data);
static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw,
                                                 u32 offset, u32 dword);
static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force);
static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state);

static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
        return readw(hw->flash_address + reg);
}

static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
{
        return readl(hw->flash_address + reg);
}

static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
{
        writew(val, hw->flash_address + reg);
}

static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
{
        writel(val, hw->flash_address + reg);
}

#define er16flash(reg)          __er16flash(hw, (reg))
#define er32flash(reg)          __er32flash(hw, (reg))
#define ew16flash(reg, val)     __ew16flash(hw, (reg), (val))
#define ew32flash(reg, val)     __ew32flash(hw, (reg), (val))

/**
 *  e1000_phy_is_accessible_pchlan - Check if able to access PHY registers
 *  @hw: pointer to the HW structure
 *
 *  Test access to the PHY registers by reading the PHY ID registers.  If
 *  the PHY ID is already known (e.g. resume path) compare it with known ID,
 *  otherwise assume the read PHY ID is correct if it is valid.
 *
 *  Assumes the sw/fw/hw semaphore is already acquired.
 **/
static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
        u16 phy_reg = 0;
        u32 phy_id = 0;
        s32 ret_val = 0;
        u16 retry_count;
        u32 mac_reg = 0;

        for (retry_count = 0; retry_count < 2; retry_count++) {
                ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg);
                if (ret_val || (phy_reg == 0xFFFF))
                        continue;
                phy_id = (u32)(phy_reg << 16);

                ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg);
                if (ret_val || (phy_reg == 0xFFFF)) {
                        phy_id = 0;
                        continue;
                }
                phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
                break;
        }

        if (hw->phy.id) {
                if (hw->phy.id == phy_id)
                        goto out;
        } else if (phy_id) {
                hw->phy.id = phy_id;
                hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
                goto out;
        }

        /* In case the PHY needs to be in mdio slow mode,
         * set slow mode and try to get the PHY id again.
         */
        if (hw->mac.type < e1000_pch_lpt) {
                hw->phy.ops.release(hw);
                ret_val = e1000_set_mdio_slow_mode_hv(hw);
                if (!ret_val)
                        ret_val = e1000e_get_phy_id(hw);
                hw->phy.ops.acquire(hw);
        }

        if (ret_val)
                return false;
out:
        if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) {
                /* Only unforce SMBus if ME is not active */
                if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
                        /* Unforce SMBus mode in PHY */
                        e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
                        phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
                        e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);

                        /* Unforce SMBus mode in MAC */
                        mac_reg = er32(CTRL_EXT);
                        mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
                        ew32(CTRL_EXT, mac_reg);
                }
        }

        return true;
}

/**
 *  e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value
 *  @hw: pointer to the HW structure
 *
 *  Toggling the LANPHYPC pin value fully power-cycles the PHY and is
 *  used to reset the PHY to a quiescent state when necessary.
 **/
static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
{
        u32 mac_reg;

        /* Set Phy Config Counter to 50msec */
        mac_reg = er32(FEXTNVM3);
        mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
        mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
        ew32(FEXTNVM3, mac_reg);

        /* Toggle LANPHYPC Value bit */
        mac_reg = er32(CTRL);
        mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
        mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
        ew32(CTRL, mac_reg);
        e1e_flush();
        usleep_range(10, 20);
        mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
        ew32(CTRL, mac_reg);
        e1e_flush();

        if (hw->mac.type < e1000_pch_lpt) {
                msleep(50);
        } else {
                u16 count = 20;

                do {
                        usleep_range(5000, 10000);
                } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--);

                msleep(30);
        }
}

/**
 *  e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
 *  @hw: pointer to the HW structure
 *
 *  Workarounds/flow necessary for PHY initialization during driver load
 *  and resume paths.
 **/
static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
{
        struct e1000_adapter *adapter = hw->adapter;
        u32 mac_reg, fwsm = er32(FWSM);
        s32 ret_val;

        /* Gate automatic PHY configuration by hardware on managed and
         * non-managed 82579 and newer adapters.
         */
        e1000_gate_hw_phy_config_ich8lan(hw, true);

        /* It is not possible to be certain of the current state of ULP
         * so forcibly disable it.
         */
        hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
        e1000_disable_ulp_lpt_lp(hw, true);

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val) {
                e_dbg("Failed to initialize PHY flow\n");
                goto out;
        }

        /* The MAC-PHY interconnect may be in SMBus mode.  If the PHY is
         * inaccessible and resetting the PHY is not blocked, toggle the
         * LANPHYPC Value bit to force the interconnect to PCIe mode.
         */
        switch (hw->mac.type) {
        case e1000_pch_lpt:
        case e1000_pch_spt:
                if (e1000_phy_is_accessible_pchlan(hw))
                        break;

                /* Before toggling LANPHYPC, see if PHY is accessible by
                 * forcing MAC to SMBus mode first.
                 */
                mac_reg = er32(CTRL_EXT);
                mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
                ew32(CTRL_EXT, mac_reg);

                /* Wait 50 milliseconds for MAC to finish any retries
                 * that it might be trying to perform from previous
                 * attempts to acknowledge any phy read requests.
                 */
                msleep(50);

                /* fall-through */
        case e1000_pch2lan:
                if (e1000_phy_is_accessible_pchlan(hw))
                        break;

                /* fall-through */
        case e1000_pchlan:
                if ((hw->mac.type == e1000_pchlan) &&
                    (fwsm & E1000_ICH_FWSM_FW_VALID))
                        break;

                if (hw->phy.ops.check_reset_block(hw)) {
                        e_dbg("Required LANPHYPC toggle blocked by ME\n");
                        ret_val = -E1000_ERR_PHY;
                        break;
                }

                /* Toggle LANPHYPC Value bit */
                e1000_toggle_lanphypc_pch_lpt(hw);
                if (hw->mac.type >= e1000_pch_lpt) {
                        if (e1000_phy_is_accessible_pchlan(hw))
                                break;

                        /* Toggling LANPHYPC brings the PHY out of SMBus mode
                         * so ensure that the MAC is also out of SMBus mode
                         */
                        mac_reg = er32(CTRL_EXT);
                        mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
                        ew32(CTRL_EXT, mac_reg);

                        if (e1000_phy_is_accessible_pchlan(hw))
                                break;

                        ret_val = -E1000_ERR_PHY;
                }
                break;
        default:
                break;
        }

        hw->phy.ops.release(hw);
        if (!ret_val) {

                /* Check to see if able to reset PHY.  Print error if not */
                if (hw->phy.ops.check_reset_block(hw)) {
                        e_err("Reset blocked by ME\n");
                        goto out;
                }

                /* Reset the PHY before any access to it.  Doing so, ensures
                 * that the PHY is in a known good state before we read/write
                 * PHY registers.  The generic reset is sufficient here,
                 * because we haven't determined the PHY type yet.
                 */
                ret_val = e1000e_phy_hw_reset_generic(hw);
                if (ret_val)
                        goto out;

                /* On a successful reset, possibly need to wait for the PHY
                 * to quiesce to an accessible state before returning control
                 * to the calling function.  If the PHY does not quiesce, then
                 * return E1000E_BLK_PHY_RESET, as this is the condition that
                 *  the PHY is in.
                 */
                ret_val = hw->phy.ops.check_reset_block(hw);
                if (ret_val)
                        e_err("ME blocked access to PHY after reset\n");
        }

out:
        /* Ungate automatic PHY configuration on non-managed 82579 */
        if ((hw->mac.type == e1000_pch2lan) &&
            !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
                usleep_range(10000, 20000);
                e1000_gate_hw_phy_config_ich8lan(hw, false);
        }

        return ret_val;
}

/**
 *  e1000_init_phy_params_pchlan - Initialize PHY function pointers
 *  @hw: pointer to the HW structure
 *
 *  Initialize family-specific PHY parameters and function pointers.
 **/
static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
{
        struct e1000_phy_info *phy = &hw->phy;
        s32 ret_val;

        phy->addr = 1;
        phy->reset_delay_us = 100;

        phy->ops.set_page = e1000_set_page_igp;
        phy->ops.read_reg = e1000_read_phy_reg_hv;
        phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
        phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
        phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
        phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
        phy->ops.write_reg = e1000_write_phy_reg_hv;
        phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
        phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
        phy->ops.power_up = e1000_power_up_phy_copper;
        phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
        phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;

        phy->id = e1000_phy_unknown;

        ret_val = e1000_init_phy_workarounds_pchlan(hw);
        if (ret_val)
                return ret_val;

        if (phy->id == e1000_phy_unknown)
                switch (hw->mac.type) {
                default:
                        ret_val = e1000e_get_phy_id(hw);
                        if (ret_val)
                                return ret_val;
                        if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
                                break;
                        /* fall-through */
                case e1000_pch2lan:
                case e1000_pch_lpt:
                case e1000_pch_spt:
                        /* In case the PHY needs to be in mdio slow mode,
                         * set slow mode and try to get the PHY id again.
                         */
                        ret_val = e1000_set_mdio_slow_mode_hv(hw);
                        if (ret_val)
                                return ret_val;
                        ret_val = e1000e_get_phy_id(hw);
                        if (ret_val)
                                return ret_val;
                        break;
                }
        phy->type = e1000e_get_phy_type_from_id(phy->id);

        switch (phy->type) {
        case e1000_phy_82577:
        case e1000_phy_82579:
        case e1000_phy_i217:
                phy->ops.check_polarity = e1000_check_polarity_82577;
                phy->ops.force_speed_duplex =
                    e1000_phy_force_speed_duplex_82577;
                phy->ops.get_cable_length = e1000_get_cable_length_82577;
                phy->ops.get_info = e1000_get_phy_info_82577;
                phy->ops.commit = e1000e_phy_sw_reset;
                break;
        case e1000_phy_82578:
                phy->ops.check_polarity = e1000_check_polarity_m88;
                phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
                phy->ops.get_cable_length = e1000e_get_cable_length_m88;
                phy->ops.get_info = e1000e_get_phy_info_m88;
                break;
        default:
                ret_val = -E1000_ERR_PHY;
                break;
        }

        return ret_val;
}

/**
 *  e1000_init_phy_params_ich8lan - Initialize PHY function pointers
 *  @hw: pointer to the HW structure
 *
 *  Initialize family-specific PHY parameters and function pointers.
 **/
static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
{
        struct e1000_phy_info *phy = &hw->phy;
        s32 ret_val;
        u16 i = 0;

        phy->addr = 1;
        phy->reset_delay_us = 100;

        phy->ops.power_up = e1000_power_up_phy_copper;
        phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;

        /* We may need to do this twice - once for IGP and if that fails,
         * we'll set BM func pointers and try again
         */
        ret_val = e1000e_determine_phy_address(hw);
        if (ret_val) {
                phy->ops.write_reg = e1000e_write_phy_reg_bm;
                phy->ops.read_reg = e1000e_read_phy_reg_bm;
                ret_val = e1000e_determine_phy_address(hw);
                if (ret_val) {
                        e_dbg("Cannot determine PHY addr. Erroring out\n");
                        return ret_val;
                }
        }

        phy->id = 0;
        while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
               (i++ < 100)) {
                usleep_range(1000, 2000);
                ret_val = e1000e_get_phy_id(hw);
                if (ret_val)
                        return ret_val;
        }

        /* Verify phy id */
        switch (phy->id) {
        case IGP03E1000_E_PHY_ID:
                phy->type = e1000_phy_igp_3;
                phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
                phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
                phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
                phy->ops.get_info = e1000e_get_phy_info_igp;
                phy->ops.check_polarity = e1000_check_polarity_igp;
                phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
                break;
        case IFE_E_PHY_ID:
        case IFE_PLUS_E_PHY_ID:
        case IFE_C_E_PHY_ID:
                phy->type = e1000_phy_ife;
                phy->autoneg_mask = E1000_ALL_NOT_GIG;
                phy->ops.get_info = e1000_get_phy_info_ife;
                phy->ops.check_polarity = e1000_check_polarity_ife;
                phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
                break;
        case BME1000_E_PHY_ID:
                phy->type = e1000_phy_bm;
                phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
                phy->ops.read_reg = e1000e_read_phy_reg_bm;
                phy->ops.write_reg = e1000e_write_phy_reg_bm;
                phy->ops.commit = e1000e_phy_sw_reset;
                phy->ops.get_info = e1000e_get_phy_info_m88;
                phy->ops.check_polarity = e1000_check_polarity_m88;
                phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
                break;
        default:
                return -E1000_ERR_PHY;
        }

        return 0;
}

/**
 *  e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
 *  @hw: pointer to the HW structure
 *
 *  Initialize family-specific NVM parameters and function
 *  pointers.
 **/
static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 gfpreg, sector_base_addr, sector_end_addr;
        u16 i;
        u32 nvm_size;

        nvm->type = e1000_nvm_flash_sw;

        if (hw->mac.type == e1000_pch_spt) {
                /* in SPT, gfpreg doesn't exist. NVM size is taken from the
                 * STRAP register. This is because in SPT the GbE Flash region
                 * is no longer accessed through the flash registers. Instead,
                 * the mechanism has changed, and the Flash region access
                 * registers are now implemented in GbE memory space.
                 */
                nvm->flash_base_addr = 0;
                nvm_size = (((er32(STRAP) >> 1) & 0x1F) + 1)
                    * NVM_SIZE_MULTIPLIER;
                nvm->flash_bank_size = nvm_size / 2;
                /* Adjust to word count */
                nvm->flash_bank_size /= sizeof(u16);
                /* Set the base address for flash register access */
                hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR;
        } else {
                /* Can't read flash registers if register set isn't mapped. */
                if (!hw->flash_address) {
                        e_dbg("ERROR: Flash registers not mapped\n");
                        return -E1000_ERR_CONFIG;
                }

                gfpreg = er32flash(ICH_FLASH_GFPREG);

                /* sector_X_addr is a "sector"-aligned address (4096 bytes)
                 * Add 1 to sector_end_addr since this sector is included in
                 * the overall size.
                 */
                sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
                sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;

                /* flash_base_addr is byte-aligned */
                nvm->flash_base_addr = sector_base_addr
                    << FLASH_SECTOR_ADDR_SHIFT;

                /* find total size of the NVM, then cut in half since the total
                 * size represents two separate NVM banks.
                 */
                nvm->flash_bank_size = ((sector_end_addr - sector_base_addr)
                                        << FLASH_SECTOR_ADDR_SHIFT);
                nvm->flash_bank_size /= 2;
                /* Adjust to word count */
                nvm->flash_bank_size /= sizeof(u16);
        }

        nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;

        /* Clear shadow ram */
        for (i = 0; i < nvm->word_size; i++) {
                dev_spec->shadow_ram[i].modified = false;
                dev_spec->shadow_ram[i].value = 0xFFFF;
        }

        return 0;
}

/**
 *  e1000_init_mac_params_ich8lan - Initialize MAC function pointers
 *  @hw: pointer to the HW structure
 *
 *  Initialize family-specific MAC parameters and function
 *  pointers.
 **/
static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
{
        struct e1000_mac_info *mac = &hw->mac;

        /* Set media type function pointer */
        hw->phy.media_type = e1000_media_type_copper;

        /* Set mta register count */
        mac->mta_reg_count = 32;
        /* Set rar entry count */
        mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
        if (mac->type == e1000_ich8lan)
                mac->rar_entry_count--;
        /* FWSM register */
        mac->has_fwsm = true;
        /* ARC subsystem not supported */
        mac->arc_subsystem_valid = false;
        /* Adaptive IFS supported */
        mac->adaptive_ifs = true;

        /* LED and other operations */
        switch (mac->type) {
        case e1000_ich8lan:
        case e1000_ich9lan:
        case e1000_ich10lan:
                /* check management mode */
                mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
                /* ID LED init */
                mac->ops.id_led_init = e1000e_id_led_init_generic;
                /* blink LED */
                mac->ops.blink_led = e1000e_blink_led_generic;
                /* setup LED */
                mac->ops.setup_led = e1000e_setup_led_generic;
                /* cleanup LED */
                mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
                /* turn on/off LED */
                mac->ops.led_on = e1000_led_on_ich8lan;
                mac->ops.led_off = e1000_led_off_ich8lan;
                break;
        case e1000_pch2lan:
                mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES;
                mac->ops.rar_set = e1000_rar_set_pch2lan;
                /* fall-through */
        case e1000_pch_lpt:
        case e1000_pch_spt:
        case e1000_pchlan:
                /* check management mode */
                mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
                /* ID LED init */
                mac->ops.id_led_init = e1000_id_led_init_pchlan;
                /* setup LED */
                mac->ops.setup_led = e1000_setup_led_pchlan;
                /* cleanup LED */
                mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
                /* turn on/off LED */
                mac->ops.led_on = e1000_led_on_pchlan;
                mac->ops.led_off = e1000_led_off_pchlan;
                break;
        default:
                break;
        }

        if ((mac->type == e1000_pch_lpt) || (mac->type == e1000_pch_spt)) {
                mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
                mac->ops.rar_set = e1000_rar_set_pch_lpt;
                mac->ops.setup_physical_interface =
                    e1000_setup_copper_link_pch_lpt;
                mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt;
        }

        /* Enable PCS Lock-loss workaround for ICH8 */
        if (mac->type == e1000_ich8lan)
                e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);

        return 0;
}

/**
 *  __e1000_access_emi_reg_locked - Read/write EMI register
 *  @hw: pointer to the HW structure
 *  @addr: EMI address to program
 *  @data: pointer to value to read/write from/to the EMI address
 *  @read: boolean flag to indicate read or write
 *
 *  This helper function assumes the SW/FW/HW Semaphore is already acquired.
 **/
static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
                                         u16 *data, bool read)
{
        s32 ret_val;

        ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address);
        if (ret_val)
                return ret_val;

        if (read)
                ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data);
        else
                ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data);

        return ret_val;
}

/**
 *  e1000_read_emi_reg_locked - Read Extended Management Interface register
 *  @hw: pointer to the HW structure
 *  @addr: EMI address to program
 *  @data: value to be read from the EMI address
 *
 *  Assumes the SW/FW/HW Semaphore is already acquired.
 **/
s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
{
        return __e1000_access_emi_reg_locked(hw, addr, data, true);
}

/**
 *  e1000_write_emi_reg_locked - Write Extended Management Interface register
 *  @hw: pointer to the HW structure
 *  @addr: EMI address to program
 *  @data: value to be written to the EMI address
 *
 *  Assumes the SW/FW/HW Semaphore is already acquired.
 **/
s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
{
        return __e1000_access_emi_reg_locked(hw, addr, &data, false);
}

/**
 *  e1000_set_eee_pchlan - Enable/disable EEE support
 *  @hw: pointer to the HW structure
 *
 *  Enable/disable EEE based on setting in dev_spec structure, the duplex of
 *  the link and the EEE capabilities of the link partner.  The LPI Control
 *  register bits will remain set only if/when link is up.
 *
 *  EEE LPI must not be asserted earlier than one second after link is up.
 *  On 82579, EEE LPI should not be enabled until such time otherwise there
 *  can be link issues with some switches.  Other devices can have EEE LPI
 *  enabled immediately upon link up since they have a timer in hardware which
 *  prevents LPI from being asserted too early.
 **/
s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
{
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        s32 ret_val;
        u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data;

        switch (hw->phy.type) {
        case e1000_phy_82579:
                lpa = I82579_EEE_LP_ABILITY;
                pcs_status = I82579_EEE_PCS_STATUS;
                adv_addr = I82579_EEE_ADVERTISEMENT;
                break;
        case e1000_phy_i217:
                lpa = I217_EEE_LP_ABILITY;
                pcs_status = I217_EEE_PCS_STATUS;
                adv_addr = I217_EEE_ADVERTISEMENT;
                break;
        default:
                return 0;
        }

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;

        ret_val = e1e_rphy_locked(hw, I82579_LPI_CTRL, &lpi_ctrl);
        if (ret_val)
                goto release;

        /* Clear bits that enable EEE in various speeds */
        lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK;

        /* Enable EEE if not disabled by user */
        if (!dev_spec->eee_disable) {
                /* Save off link partner's EEE ability */
                ret_val = e1000_read_emi_reg_locked(hw, lpa,
                                                    &dev_spec->eee_lp_ability);
                if (ret_val)
                        goto release;

                /* Read EEE advertisement */
                ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv);
                if (ret_val)
                        goto release;

                /* Enable EEE only for speeds in which the link partner is
                 * EEE capable and for which we advertise EEE.
                 */
                if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
                        lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;

                if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
                        e1e_rphy_locked(hw, MII_LPA, &data);
                        if (data & LPA_100FULL)
                                lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
                        else
                                /* EEE is not supported in 100Half, so ignore
                                 * partner's EEE in 100 ability if full-duplex
                                 * is not advertised.
                                 */
                                dev_spec->eee_lp_ability &=
                                    ~I82579_EEE_100_SUPPORTED;
                }
        }

        if (hw->phy.type == e1000_phy_82579) {
                ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT,
                                                    &data);
                if (ret_val)
                        goto release;

                data &= ~I82579_LPI_100_PLL_SHUT;
                ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT,
                                                     data);
        }

        /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
        ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
        if (ret_val)
                goto release;

        ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl);
release:
        hw->phy.ops.release(hw);

        return ret_val;
}

/**
 *  e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
 *  @hw:   pointer to the HW structure
 *  @link: link up bool flag
 *
 *  When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
 *  preventing further DMA write requests.  Workaround the issue by disabling
 *  the de-assertion of the clock request when in 1Gpbs mode.
 *  Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link
 *  speeds in order to avoid Tx hangs.
 **/
static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
{
        u32 fextnvm6 = er32(FEXTNVM6);
        u32 status = er32(STATUS);
        s32 ret_val = 0;
        u16 reg;

        if (link && (status & E1000_STATUS_SPEED_1000)) {
                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return ret_val;

                ret_val =
                    e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
                                                &reg);
                if (ret_val)
                        goto release;

                ret_val =
                    e1000e_write_kmrn_reg_locked(hw,
                                                 E1000_KMRNCTRLSTA_K1_CONFIG,
                                                 reg &
                                                 ~E1000_KMRNCTRLSTA_K1_ENABLE);
                if (ret_val)
                        goto release;

                usleep_range(10, 20);

                ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);

                ret_val =
                    e1000e_write_kmrn_reg_locked(hw,
                                                 E1000_KMRNCTRLSTA_K1_CONFIG,
                                                 reg);
release:
                hw->phy.ops.release(hw);
        } else {
                /* clear FEXTNVM6 bit 8 on link down or 10/100 */
                fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK;

                if ((hw->phy.revision > 5) || !link ||
                    ((status & E1000_STATUS_SPEED_100) &&
                     (status & E1000_STATUS_FD)))
                        goto update_fextnvm6;

                ret_val = e1e_rphy(hw, I217_INBAND_CTRL, &reg);
                if (ret_val)
                        return ret_val;

                /* Clear link status transmit timeout */
                reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK;

                if (status & E1000_STATUS_SPEED_100) {
                        /* Set inband Tx timeout to 5x10us for 100Half */
                        reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT;

                        /* Do not extend the K1 entry latency for 100Half */
                        fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION;
                } else {
                        /* Set inband Tx timeout to 50x10us for 10Full/Half */
                        reg |= 50 <<
                            I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT;

                        /* Extend the K1 entry latency for 10 Mbps */
                        fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION;
                }

                ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg);
                if (ret_val)
                        return ret_val;

update_fextnvm6:
                ew32(FEXTNVM6, fextnvm6);
        }

        return ret_val;
}

/**
 *  e1000_platform_pm_pch_lpt - Set platform power management values
 *  @hw: pointer to the HW structure
 *  @link: bool indicating link status
 *
 *  Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like"
 *  GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed
 *  when link is up (which must not exceed the maximum latency supported
 *  by the platform), otherwise specify there is no LTR requirement.
 *  Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop
 *  latencies in the LTR Extended Capability Structure in the PCIe Extended
 *  Capability register set, on this device LTR is set by writing the
 *  equivalent snoop/no-snoop latencies in the LTRV register in the MAC and
 *  set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB)
 *  message to the PMC.
 **/
static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
{
        u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
            link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
        u16 lat_enc = 0;        /* latency encoded */

        if (link) {
                u16 speed, duplex, scale = 0;
                u16 max_snoop, max_nosnoop;
                u16 max_ltr_enc;        /* max LTR latency encoded */
                u64 value;
                u32 rxa;

                if (!hw->adapter->max_frame_size) {
                        e_dbg("max_frame_size not set.\n");
                        return -E1000_ERR_CONFIG;
                }

                hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
                if (!speed) {
                        e_dbg("Speed not set.\n");
                        return -E1000_ERR_CONFIG;
                }

                /* Rx Packet Buffer Allocation size (KB) */
                rxa = er32(PBA) & E1000_PBA_RXA_MASK;

                /* Determine the maximum latency tolerated by the device.
                 *
                 * Per the PCIe spec, the tolerated latencies are encoded as
                 * a 3-bit encoded scale (only 0-5 are valid) multiplied by
                 * a 10-bit value (0-1023) to provide a range from 1 ns to
                 * 2^25*(2^10-1) ns.  The scale is encoded as 0=2^0ns,
                 * 1=2^5ns, 2=2^10ns,...5=2^25ns.
                 */
                rxa *= 512;
                value = (rxa > hw->adapter->max_frame_size) ?
                        (rxa - hw->adapter->max_frame_size) * (16000 / speed) :
                        0;

                while (value > PCI_LTR_VALUE_MASK) {
                        scale++;
                        value = DIV_ROUND_UP(value, BIT(5));
                }
                if (scale > E1000_LTRV_SCALE_MAX) {
                        e_dbg("Invalid LTR latency scale %d\n", scale);
                        return -E1000_ERR_CONFIG;
                }
                lat_enc = (u16)((scale << PCI_LTR_SCALE_SHIFT) | value);

                /* Determine the maximum latency tolerated by the platform */
                pci_read_config_word(hw->adapter->pdev, E1000_PCI_LTR_CAP_LPT,
                                     &max_snoop);
                pci_read_config_word(hw->adapter->pdev,
                                     E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop);
                max_ltr_enc = max_t(u16, max_snoop, max_nosnoop);

                if (lat_enc > max_ltr_enc)
                        lat_enc = max_ltr_enc;
        }

        /* Set Snoop and No-Snoop latencies the same */
        reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT);
        ew32(LTRV, reg);

        return 0;
}

/**
 *  e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
 *  @hw: pointer to the HW structure
 *  @to_sx: boolean indicating a system power state transition to Sx
 *
 *  When link is down, configure ULP mode to significantly reduce the power
 *  to the PHY.  If on a Manageability Engine (ME) enabled system, tell the
 *  ME firmware to start the ULP configuration.  If not on an ME enabled
 *  system, configure the ULP mode by software.
 */
s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
{
        u32 mac_reg;
        s32 ret_val = 0;
        u16 phy_reg;
        u16 oem_reg = 0;

        if ((hw->mac.type < e1000_pch_lpt) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
            (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on))
                return 0;

        if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
                /* Request ME configure ULP mode in the PHY */
                mac_reg = er32(H2ME);
                mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS;
                ew32(H2ME, mac_reg);

                goto out;
        }

        if (!to_sx) {
                int i = 0;

                /* Poll up to 5 seconds for Cable Disconnected indication */
                while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) {
                        /* Bail if link is re-acquired */
                        if (er32(STATUS) & E1000_STATUS_LU)
                                return -E1000_ERR_PHY;

                        if (i++ == 100)
                                break;

                        msleep(50);
                }
                e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n",
                      (er32(FEXT) &
                       E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50);
        }

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                goto out;

        /* Force SMBus mode in PHY */
        ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
        if (ret_val)
                goto release;
        phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
        e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);

        /* Force SMBus mode in MAC */
        mac_reg = er32(CTRL_EXT);
        mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
        ew32(CTRL_EXT, mac_reg);

        /* Si workaround for ULP entry flow on i127/rev6 h/w.  Enable
         * LPLU and disable Gig speed when entering ULP
         */
        if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) {
                ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS,
                                                       &oem_reg);
                if (ret_val)
                        goto release;

                phy_reg = oem_reg;
                phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS;

                ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
                                                        phy_reg);

                if (ret_val)
                        goto release;
        }

        /* Set Inband ULP Exit, Reset to SMBus mode and
         * Disable SMBus Release on PERST# in PHY
         */
        ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
        if (ret_val)
                goto release;
        phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS |
                    I218_ULP_CONFIG1_DISABLE_SMB_PERST);
        if (to_sx) {
                if (er32(WUFC) & E1000_WUFC_LNKC)
                        phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
                else
                        phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST;

                phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
                phy_reg &= ~I218_ULP_CONFIG1_INBAND_EXIT;
        } else {
                phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
                phy_reg &= ~I218_ULP_CONFIG1_STICKY_ULP;
                phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST;
        }
        e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);

        /* Set Disable SMBus Release on PERST# in MAC */
        mac_reg = er32(FEXTNVM7);
        mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST;
        ew32(FEXTNVM7, mac_reg);

        /* Commit ULP changes in PHY by starting auto ULP configuration */
        phy_reg |= I218_ULP_CONFIG1_START;
        e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);

        if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) &&
            to_sx && (er32(STATUS) & E1000_STATUS_LU)) {
                ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
                                                        oem_reg);
                if (ret_val)
                        goto release;
        }

release:
        hw->phy.ops.release(hw);
out:
        if (ret_val)
                e_dbg("Error in ULP enable flow: %d\n", ret_val);
        else
                hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on;

        return ret_val;
}

/**
 *  e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP
 *  @hw: pointer to the HW structure
 *  @force: boolean indicating whether or not to force disabling ULP
 *
 *  Un-configure ULP mode when link is up, the system is transitioned from
 *  Sx or the driver is unloaded.  If on a Manageability Engine (ME) enabled
 *  system, poll for an indication from ME that ULP has been un-configured.
 *  If not on an ME enabled system, un-configure the ULP mode by software.
 *
 *  During nominal operation, this function is called when link is acquired
 *  to disable ULP mode (force=false); otherwise, for example when unloading
 *  the driver or during Sx->S0 transitions, this is called with force=true
 *  to forcibly disable ULP.
 */
static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
{
        s32 ret_val = 0;
        u32 mac_reg;
        u16 phy_reg;
        int i = 0;

        if ((hw->mac.type < e1000_pch_lpt) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
            (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off))
                return 0;

        if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
                if (force) {
                        /* Request ME un-configure ULP mode in the PHY */
                        mac_reg = er32(H2ME);
                        mac_reg &= ~E1000_H2ME_ULP;
                        mac_reg |= E1000_H2ME_ENFORCE_SETTINGS;
                        ew32(H2ME, mac_reg);
                }

                /* Poll up to 300msec for ME to clear ULP_CFG_DONE. */
                while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
                        if (i++ == 30) {
                                ret_val = -E1000_ERR_PHY;
                                goto out;
                        }

                        usleep_range(10000, 20000);
                }
                e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);

                if (force) {
                        mac_reg = er32(H2ME);
                        mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS;
                        ew32(H2ME, mac_reg);
                } else {
                        /* Clear H2ME.ULP after ME ULP configuration */
                        mac_reg = er32(H2ME);
                        mac_reg &= ~E1000_H2ME_ULP;
                        ew32(H2ME, mac_reg);
                }

                goto out;
        }

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                goto out;

        if (force)
                /* Toggle LANPHYPC Value bit */
                e1000_toggle_lanphypc_pch_lpt(hw);

        /* Unforce SMBus mode in PHY */
        ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
        if (ret_val) {
                /* The MAC might be in PCIe mode, so temporarily force to
                 * SMBus mode in order to access the PHY.
                 */
                mac_reg = er32(CTRL_EXT);
                mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
                ew32(CTRL_EXT, mac_reg);

                msleep(50);

                ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL,
                                                       &phy_reg);
                if (ret_val)
                        goto release;
        }
        phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
        e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);

        /* Unforce SMBus mode in MAC */
        mac_reg = er32(CTRL_EXT);
        mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
        ew32(CTRL_EXT, mac_reg);

        /* When ULP mode was previously entered, K1 was disabled by the
         * hardware.  Re-Enable K1 in the PHY when exiting ULP.
         */
        ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg);
        if (ret_val)
                goto release;
        phy_reg |= HV_PM_CTRL_K1_ENABLE;
        e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg);

        /* Clear ULP enabled configuration */
        ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
        if (ret_val)
                goto release;
        phy_reg &= ~(I218_ULP_CONFIG1_IND |
                     I218_ULP_CONFIG1_STICKY_ULP |
                     I218_ULP_CONFIG1_RESET_TO_SMBUS |
                     I218_ULP_CONFIG1_WOL_HOST |
                     I218_ULP_CONFIG1_INBAND_EXIT |
                     I218_ULP_CONFIG1_EN_ULP_LANPHYPC |
                     I218_ULP_CONFIG1_DIS_CLR_STICKY_ON_PERST |
                     I218_ULP_CONFIG1_DISABLE_SMB_PERST);
        e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);

        /* Commit ULP changes by starting auto ULP configuration */
        phy_reg |= I218_ULP_CONFIG1_START;
        e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);

        /* Clear Disable SMBus Release on PERST# in MAC */
        mac_reg = er32(FEXTNVM7);
        mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST;
        ew32(FEXTNVM7, mac_reg);

release:
        hw->phy.ops.release(hw);
        if (force) {
                e1000_phy_hw_reset(hw);
                msleep(50);
        }
out:
        if (ret_val)
                e_dbg("Error in ULP disable flow: %d\n", ret_val);
        else
                hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off;

        return ret_val;
}

/**
 *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
 *  @hw: pointer to the HW structure
 *
 *  Checks to see of the link status of the hardware has changed.  If a
 *  change in link status has been detected, then we read the PHY registers
 *  to get the current speed/duplex if link exists.
 **/
static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
{
        struct e1000_mac_info *mac = &hw->mac;
        s32 ret_val, tipg_reg = 0;
        u16 emi_addr, emi_val = 0;
        bool link;
        u16 phy_reg;

        /* We only want to go out to the PHY registers to see if Auto-Neg
         * has completed and/or if our link status has changed.  The
         * get_link_status flag is set upon receiving a Link Status
         * Change or Rx Sequence Error interrupt.
         */
        if (!mac->get_link_status)
                return 0;

        /* First we want to see if the MII Status Register reports
         * link.  If so, then we want to get the current speed/duplex
         * of the PHY.
         */
        ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
        if (ret_val)
                return ret_val;

        if (hw->mac.type == e1000_pchlan) {
                ret_val = e1000_k1_gig_workaround_hv(hw, link);
                if (ret_val)
                        return ret_val;
        }

        /* When connected at 10Mbps half-duplex, some parts are excessively
         * aggressive resulting in many collisions. To avoid this, increase
         * the IPG and reduce Rx latency in the PHY.
         */
        if (((hw->mac.type == e1000_pch2lan) ||
             (hw->mac.type == e1000_pch_lpt) ||
             (hw->mac.type == e1000_pch_spt)) && link) {
                u16 speed, duplex;

                e1000e_get_speed_and_duplex_copper(hw, &speed, &duplex);
                tipg_reg = er32(TIPG);
                tipg_reg &= ~E1000_TIPG_IPGT_MASK;

                if (duplex == HALF_DUPLEX && speed == SPEED_10) {
                        tipg_reg |= 0xFF;
                        /* Reduce Rx latency in analog PHY */
                        emi_val = 0;
                } else if (hw->mac.type == e1000_pch_spt &&
                           duplex == FULL_DUPLEX && speed != SPEED_1000) {
                        tipg_reg |= 0xC;
                        emi_val = 1;
                } else {

                        /* Roll back the default values */
                        tipg_reg |= 0x08;
                        emi_val = 1;
                }

                ew32(TIPG, tipg_reg);

                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return ret_val;

                if (hw->mac.type == e1000_pch2lan)
                        emi_addr = I82579_RX_CONFIG;
                else
                        emi_addr = I217_RX_CONFIG;
                ret_val = e1000_write_emi_reg_locked(hw, emi_addr, emi_val);

                if (hw->mac.type == e1000_pch_lpt ||
                    hw->mac.type == e1000_pch_spt) {
                        u16 phy_reg;

                        e1e_rphy_locked(hw, I217_PLL_CLOCK_GATE_REG, &phy_reg);
                        phy_reg &= ~I217_PLL_CLOCK_GATE_MASK;
                        if (speed == SPEED_100 || speed == SPEED_10)
                                phy_reg |= 0x3E8;
                        else
                                phy_reg |= 0xFA;
                        e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg);
                }
                hw->phy.ops.release(hw);

                if (ret_val)
                        return ret_val;

                if (hw->mac.type == e1000_pch_spt) {
                        u16 data;
                        u16 ptr_gap;

                        if (speed == SPEED_1000) {
                                ret_val = hw->phy.ops.acquire(hw);
                                if (ret_val)
                                        return ret_val;

                                ret_val = e1e_rphy_locked(hw,
                                                          PHY_REG(776, 20),
                                                          &data);
                                if (ret_val) {
                                        hw->phy.ops.release(hw);
                                        return ret_val;
                                }

                                ptr_gap = (data & (0x3FF << 2)) >> 2;
                                if (ptr_gap < 0x18) {
                                        data &= ~(0x3FF << 2);
                                        data |= (0x18 << 2);
                                        ret_val =
                                            e1e_wphy_locked(hw,
                                                            PHY_REG(776, 20),
                                                            data);
                                }
                                hw->phy.ops.release(hw);
                                if (ret_val)
                                        return ret_val;
                        } else {
                                ret_val = hw->phy.ops.acquire(hw);
                                if (ret_val)
                                        return ret_val;

                                ret_val = e1e_wphy_locked(hw,
                                                          PHY_REG(776, 20),
                                                          0xC023);
                                hw->phy.ops.release(hw);
                                if (ret_val)
                                        return ret_val;

                        }
                }
        }

        /* I217 Packet Loss issue:
         * ensure that FEXTNVM4 Beacon Duration is set correctly
         * on power up.
         * Set the Beacon Duration for I217 to 8 usec
         */
        if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) {
                u32 mac_reg;

                mac_reg = er32(FEXTNVM4);
                mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
                mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
                ew32(FEXTNVM4, mac_reg);
        }

        /* Work-around I218 hang issue */
        if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) ||
            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) {
                ret_val = e1000_k1_workaround_lpt_lp(hw, link);
                if (ret_val)
                        return ret_val;
        }
        if ((hw->mac.type == e1000_pch_lpt) ||
            (hw->mac.type == e1000_pch_spt)) {
                /* Set platform power management values for
                 * Latency Tolerance Reporting (LTR)
                 */
                ret_val = e1000_platform_pm_pch_lpt(hw, link);
                if (ret_val)
                        return ret_val;
        }

        /* Clear link partner's EEE ability */
        hw->dev_spec.ich8lan.eee_lp_ability = 0;

        /* FEXTNVM6 K1-off workaround */
        if (hw->mac.type == e1000_pch_spt) {
                u32 pcieanacfg = er32(PCIEANACFG);
                u32 fextnvm6 = er32(FEXTNVM6);

                if (pcieanacfg & E1000_FEXTNVM6_K1_OFF_ENABLE)
                        fextnvm6 |= E1000_FEXTNVM6_K1_OFF_ENABLE;
                else
                        fextnvm6 &= ~E1000_FEXTNVM6_K1_OFF_ENABLE;

                ew32(FEXTNVM6, fextnvm6);
        }

        if (!link)
                return 0;       /* No link detected */

        mac->get_link_status = false;

        switch (hw->mac.type) {
        case e1000_pch2lan:
                ret_val = e1000_k1_workaround_lv(hw);
                if (ret_val)
                        return ret_val;
                /* fall-thru */
        case e1000_pchlan:
                if (hw->phy.type == e1000_phy_82578) {
                        ret_val = e1000_link_stall_workaround_hv(hw);
                        if (ret_val)
                                return ret_val;
                }

                /* Workaround for PCHx parts in half-duplex:
                 * Set the number of preambles removed from the packet
                 * when it is passed from the PHY to the MAC to prevent
                 * the MAC from misinterpreting the packet type.
                 */
                e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
                phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;

                if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
                        phy_reg |= BIT(HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);

                e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
                break;
        default:
                break;
        }

        /* Check if there was DownShift, must be checked
         * immediately after link-up
         */
        e1000e_check_downshift(hw);

        /* Enable/Disable EEE after link up */
        if (hw->phy.type > e1000_phy_82579) {
                ret_val = e1000_set_eee_pchlan(hw);
                if (ret_val)
                        return ret_val;
        }

        /* If we are forcing speed/duplex, then we simply return since
         * we have already determined whether we have link or not.
         */
        if (!mac->autoneg)
                return -E1000_ERR_CONFIG;

        /* Auto-Neg is enabled.  Auto Speed Detection takes care
         * of MAC speed/duplex configuration.  So we only need to
         * configure Collision Distance in the MAC.
         */
        mac->ops.config_collision_dist(hw);

        /* Configure Flow Control now that Auto-Neg has completed.
         * First, we need to restore the desired flow control
         * settings because we may have had to re-autoneg with a
         * different link partner.
         */
        ret_val = e1000e_config_fc_after_link_up(hw);
        if (ret_val)
                e_dbg("Error configuring flow control\n");

        return ret_val;
}

static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
{
        struct e1000_hw *hw = &adapter->hw;
        s32 rc;

        rc = e1000_init_mac_params_ich8lan(hw);
        if (rc)
                return rc;

        rc = e1000_init_nvm_params_ich8lan(hw);
        if (rc)
                return rc;

        switch (hw->mac.type) {
        case e1000_ich8lan:
        case e1000_ich9lan:
        case e1000_ich10lan:
                rc = e1000_init_phy_params_ich8lan(hw);
                break;
        case e1000_pchlan:
        case e1000_pch2lan:
        case e1000_pch_lpt:
        case e1000_pch_spt:
                rc = e1000_init_phy_params_pchlan(hw);
                break;
        default:
                break;
        }
        if (rc)
                return rc;

        /* Disable Jumbo Frame support on parts with Intel 10/100 PHY or
         * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
         */
        if ((adapter->hw.phy.type == e1000_phy_ife) ||
            ((adapter->hw.mac.type >= e1000_pch2lan) &&
             (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
                adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
                adapter->max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;

                hw->mac.ops.blink_led = NULL;
        }

        if ((adapter->hw.mac.type == e1000_ich8lan) &&
            (adapter->hw.phy.type != e1000_phy_ife))
                adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;

        /* Enable workaround for 82579 w/ ME enabled */
        if ((adapter->hw.mac.type == e1000_pch2lan) &&
            (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
                adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;

        return 0;
}

static DEFINE_MUTEX(nvm_mutex);

/**
 *  e1000_acquire_nvm_ich8lan - Acquire NVM mutex
 *  @hw: pointer to the HW structure
 *
 *  Acquires the mutex for performing NVM operations.
 **/
static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw __always_unused *hw)
{
        mutex_lock(&nvm_mutex);

        return 0;
}

/**
 *  e1000_release_nvm_ich8lan - Release NVM mutex
 *  @hw: pointer to the HW structure
 *
 *  Releases the mutex used while performing NVM operations.
 **/
static void e1000_release_nvm_ich8lan(struct e1000_hw __always_unused *hw)
{
        mutex_unlock(&nvm_mutex);
}

/**
 *  e1000_acquire_swflag_ich8lan - Acquire software control flag
 *  @hw: pointer to the HW structure
 *
 *  Acquires the software control flag for performing PHY and select
 *  MAC CSR accesses.
 **/
static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
{
        u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
        s32 ret_val = 0;

        if (test_and_set_bit(__E1000_ACCESS_SHARED_RESOURCE,
                             &hw->adapter->state)) {
                e_dbg("contention for Phy access\n");
                return -E1000_ERR_PHY;
        }

        while (timeout) {
                extcnf_ctrl = er32(EXTCNF_CTRL);
                if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
                        break;

                mdelay(1);
                timeout--;
        }

        if (!timeout) {
                e_dbg("SW has already locked the resource.\n");
                ret_val = -E1000_ERR_CONFIG;
                goto out;
        }

        timeout = SW_FLAG_TIMEOUT;

        extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
        ew32(EXTCNF_CTRL, extcnf_ctrl);

        while (timeout) {
                extcnf_ctrl = er32(EXTCNF_CTRL);
                if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
                        break;

                mdelay(1);
                timeout--;
        }

        if (!timeout) {
                e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
                      er32(FWSM), extcnf_ctrl);
                extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
                ew32(EXTCNF_CTRL, extcnf_ctrl);
                ret_val = -E1000_ERR_CONFIG;
                goto out;
        }

out:
        if (ret_val)
                clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);

        return ret_val;
}

/**
 *  e1000_release_swflag_ich8lan - Release software control flag
 *  @hw: pointer to the HW structure
 *
 *  Releases the software control flag for performing PHY and select
 *  MAC CSR accesses.
 **/
static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
{
        u32 extcnf_ctrl;

        extcnf_ctrl = er32(EXTCNF_CTRL);

        if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) {
                extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
                ew32(EXTCNF_CTRL, extcnf_ctrl);
        } else {
                e_dbg("Semaphore unexpectedly released by sw/fw/hw\n");
        }

        clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
}

/**
 *  e1000_check_mng_mode_ich8lan - Checks management mode
 *  @hw: pointer to the HW structure
 *
 *  This checks if the adapter has any manageability enabled.
 *  This is a function pointer entry point only called by read/write
 *  routines for the PHY and NVM parts.
 **/
static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
{
        u32 fwsm;

        fwsm = er32(FWSM);
        return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
                ((fwsm & E1000_FWSM_MODE_MASK) ==
                 (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
}

/**
 *  e1000_check_mng_mode_pchlan - Checks management mode
 *  @hw: pointer to the HW structure
 *
 *  This checks if the adapter has iAMT enabled.
 *  This is a function pointer entry point only called by read/write
 *  routines for the PHY and NVM parts.
 **/
static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
{
        u32 fwsm;

        fwsm = er32(FWSM);
        return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
            (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
}

/**
 *  e1000_rar_set_pch2lan - Set receive address register
 *  @hw: pointer to the HW structure
 *  @addr: pointer to the receive address
 *  @index: receive address array register
 *
 *  Sets the receive address array register at index to the address passed
 *  in by addr.  For 82579, RAR[0] is the base address register that is to
 *  contain the MAC address but RAR[1-6] are reserved for manageability (ME).
 *  Use SHRA[0-3] in place of those reserved for ME.
 **/
static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
{
        u32 rar_low, rar_high;

        /* HW expects these in little endian so we reverse the byte order
         * from network order (big endian) to little endian
         */
        rar_low = ((u32)addr[0] |
                   ((u32)addr[1] << 8) |
                   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));

        rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));

        /* If MAC address zero, no need to set the AV bit */
        if (rar_low || rar_high)
                rar_high |= E1000_RAH_AV;

        if (index == 0) {
                ew32(RAL(index), rar_low);
                e1e_flush();
                ew32(RAH(index), rar_high);
                e1e_flush();
                return 0;
        }

        /* RAR[1-6] are owned by manageability.  Skip those and program the
         * next address into the SHRA register array.
         */
        if (index < (u32)(hw->mac.rar_entry_count)) {
                s32 ret_val;

                ret_val = e1000_acquire_swflag_ich8lan(hw);
                if (ret_val)
                        goto out;

                ew32(SHRAL(index - 1), rar_low);
                e1e_flush();
                ew32(SHRAH(index - 1), rar_high);
                e1e_flush();

                e1000_release_swflag_ich8lan(hw);

                /* verify the register updates */
                if ((er32(SHRAL(index - 1)) == rar_low) &&
                    (er32(SHRAH(index - 1)) == rar_high))
                        return 0;

                e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n",
                      (index - 1), er32(FWSM));
        }

out:
        e_dbg("Failed to write receive address at index %d\n", index);
        return -E1000_ERR_CONFIG;
}

/**
 *  e1000_rar_get_count_pch_lpt - Get the number of available SHRA
 *  @hw: pointer to the HW structure
 *
 *  Get the number of available receive registers that the Host can
 *  program. SHRA[0-10] are the shared receive address registers
 *  that are shared between the Host and manageability engine (ME).
 *  ME can reserve any number of addresses and the host needs to be
 *  able to tell how many available registers it has access to.
 **/
static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw)
{
        u32 wlock_mac;
        u32 num_entries;

        wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK;
        wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT;

        switch (wlock_mac) {
        case 0:
                /* All SHRA[0..10] and RAR[0] available */
                num_entries = hw->mac.rar_entry_count;
                break;
        case 1:
                /* Only RAR[0] available */
                num_entries = 1;
                break;
        default:
                /* SHRA[0..(wlock_mac - 1)] available + RAR[0] */
                num_entries = wlock_mac + 1;
                break;
        }

        return num_entries;
}

/**
 *  e1000_rar_set_pch_lpt - Set receive address registers
 *  @hw: pointer to the HW structure
 *  @addr: pointer to the receive address
 *  @index: receive address array register
 *
 *  Sets the receive address register array at index to the address passed
 *  in by addr. For LPT, RAR[0] is the base address register that is to
 *  contain the MAC address. SHRA[0-10] are the shared receive address
 *  registers that are shared between the Host and manageability engine (ME).
 **/
static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index)
{
        u32 rar_low, rar_high;
        u32 wlock_mac;

        /* HW expects these in little endian so we reverse the byte order
         * from network order (big endian) to little endian
         */
        rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
                   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));

        rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));

        /* If MAC address zero, no need to set the AV bit */
        if (rar_low || rar_high)
                rar_high |= E1000_RAH_AV;

        if (index == 0) {
                ew32(RAL(index), rar_low);
                e1e_flush();
                ew32(RAH(index), rar_high);
                e1e_flush();
                return 0;
        }

        /* The manageability engine (ME) can lock certain SHRAR registers that
         * it is using - those registers are unavailable for use.
         */
        if (index < hw->mac.rar_entry_count) {
                wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK;
                wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT;

                /* Check if all SHRAR registers are locked */
                if (wlock_mac == 1)
                        goto out;

                if ((wlock_mac == 0) || (index <= wlock_mac)) {
                        s32 ret_val;

                        ret_val = e1000_acquire_swflag_ich8lan(hw);

                        if (ret_val)
                                goto out;

                        ew32(SHRAL_PCH_LPT(index - 1), rar_low);
                        e1e_flush();
                        ew32(SHRAH_PCH_LPT(index - 1), rar_high);
                        e1e_flush();

                        e1000_release_swflag_ich8lan(hw);

                        /* verify the register updates */
                        if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) &&
                            (er32(SHRAH_PCH_LPT(index - 1)) == rar_high))
                                return 0;
                }
        }

out:
        e_dbg("Failed to write receive address at index %d\n", index);
        return -E1000_ERR_CONFIG;
}

/**
 *  e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
 *  @hw: pointer to the HW structure
 *
 *  Checks if firmware is blocking the reset of the PHY.
 *  This is a function pointer entry point only called by
 *  reset routines.
 **/
static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
{
        bool blocked = false;
        int i = 0;

        while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) &&
               (i++ < 30))
                usleep_range(10000, 20000);
        return blocked ? E1000_BLK_PHY_RESET : 0;
}

/**
 *  e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
 *  @hw: pointer to the HW structure
 *
 *  Assumes semaphore already acquired.
 *
 **/
static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
{
        u16 phy_data;
        u32 strap = er32(STRAP);
        u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >>
            E1000_STRAP_SMT_FREQ_SHIFT;
        s32 ret_val;

        strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;

        ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
        if (ret_val)
                return ret_val;

        phy_data &= ~HV_SMB_ADDR_MASK;
        phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
        phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;

        if (hw->phy.type == e1000_phy_i217) {
                /* Restore SMBus frequency */
                if (freq--) {
                        phy_data &= ~HV_SMB_ADDR_FREQ_MASK;
                        phy_data |= (freq & BIT(0)) <<
                            HV_SMB_ADDR_FREQ_LOW_SHIFT;
                        phy_data |= (freq & BIT(1)) <<
                            (HV_SMB_ADDR_FREQ_HIGH_SHIFT - 1);
                } else {
                        e_dbg("Unsupported SMB frequency in PHY\n");
                }
        }

        return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
}

/**
 *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
 *  @hw:   pointer to the HW structure
 *
 *  SW should configure the LCD from the NVM extended configuration region
 *  as a workaround for certain parts.
 **/
static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
{
        struct e1000_phy_info *phy = &hw->phy;
        u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
        s32 ret_val = 0;
        u16 word_addr, reg_data, reg_addr, phy_page = 0;

        /* Initialize the PHY from the NVM on ICH platforms.  This
         * is needed due to an issue where the NVM configuration is
         * not properly autoloaded after power transitions.
         * Therefore, after each PHY reset, we will load the
         * configuration data out of the NVM manually.
         */
        switch (hw->mac.type) {
        case e1000_ich8lan:
                if (phy->type != e1000_phy_igp_3)
                        return ret_val;

                if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
                    (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
                        sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
                        break;
                }
                /* Fall-thru */
        case e1000_pchlan:
        case e1000_pch2lan:
        case e1000_pch_lpt:
        case e1000_pch_spt:
                sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
                break;
        default:
                return ret_val;
        }

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;

        data = er32(FEXTNVM);
        if (!(data & sw_cfg_mask))
                goto release;

        /* Make sure HW does not configure LCD from PHY
         * extended configuration before SW configuration
         */
        data = er32(EXTCNF_CTRL);
        if ((hw->mac.type < e1000_pch2lan) &&
            (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE))
                goto release;

        cnf_size = er32(EXTCNF_SIZE);
        cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
        cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
        if (!cnf_size)
                goto release;

        cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
        cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;

        if (((hw->mac.type == e1000_pchlan) &&
             !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) ||
            (hw->mac.type > e1000_pchlan)) {
                /* HW configures the SMBus address and LEDs when the
                 * OEM and LCD Write Enable bits are set in the NVM.
                 * When both NVM bits are cleared, SW will configure
                 * them instead.
                 */
                ret_val = e1000_write_smbus_addr(hw);
                if (ret_val)
                        goto release;

                data = er32(LEDCTL);
                ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
                                                        (u16)data);
                if (ret_val)
                        goto release;
        }

        /* Configure LCD from extended configuration region. */

        /* cnf_base_addr is in DWORD */
        word_addr = (u16)(cnf_base_addr << 1);

        for (i = 0; i < cnf_size; i++) {
                ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, &reg_data);
                if (ret_val)
                        goto release;

                ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
                                         1, &reg_addr);
                if (ret_val)
                        goto release;

                /* Save off the PHY page for future writes. */
                if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
                        phy_page = reg_data;
                        continue;
                }

                reg_addr &= PHY_REG_MASK;
                reg_addr |= phy_page;

                ret_val = e1e_wphy_locked(hw, (u32)reg_addr, reg_data);
                if (ret_val)
                        goto release;
        }

release:
        hw->phy.ops.release(hw);
        return ret_val;
}

/**
 *  e1000_k1_gig_workaround_hv - K1 Si workaround
 *  @hw:   pointer to the HW structure
 *  @link: link up bool flag
 *
 *  If K1 is enabled for 1Gbps, the MAC might stall when transitioning
 *  from a lower speed.  This workaround disables K1 whenever link is at 1Gig
 *  If link is down, the function will restore the default K1 setting located
 *  in the NVM.
 **/
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
{
        s32 ret_val = 0;
        u16 status_reg = 0;
        bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;

        if (hw->mac.type != e1000_pchlan)
                return 0;

        /* Wrap the whole flow with the sw flag */
        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;

        /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
        if (link) {
                if (hw->phy.type == e1000_phy_82578) {
                        ret_val = e1e_rphy_locked(hw, BM_CS_STATUS,
                                                  &status_reg);
                        if (ret_val)
                                goto release;

                        status_reg &= (BM_CS_STATUS_LINK_UP |
                                       BM_CS_STATUS_RESOLVED |
                                       BM_CS_STATUS_SPEED_MASK);

                        if (status_reg == (BM_CS_STATUS_LINK_UP |
                                           BM_CS_STATUS_RESOLVED |
                                           BM_CS_STATUS_SPEED_1000))
                                k1_enable = false;
                }

                if (hw->phy.type == e1000_phy_82577) {
                        ret_val = e1e_rphy_locked(hw, HV_M_STATUS, &status_reg);
                        if (ret_val)
                                goto release;

                        status_reg &= (HV_M_STATUS_LINK_UP |
                                       HV_M_STATUS_AUTONEG_COMPLETE |
                                       HV_M_STATUS_SPEED_MASK);

                        if (status_reg == (HV_M_STATUS_LINK_UP |
                                           HV_M_STATUS_AUTONEG_COMPLETE |
                                           HV_M_STATUS_SPEED_1000))
                                k1_enable = false;
                }

                /* Link stall fix for link up */
                ret_val = e1e_wphy_locked(hw, PHY_REG(770, 19), 0x0100);
                if (ret_val)
                        goto release;

        } else {
                /* Link stall fix for link down */
                ret_val = e1e_wphy_locked(hw, PHY_REG(770, 19), 0x4100);
                if (ret_val)
                        goto release;
        }

        ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);

release:
        hw->phy.ops.release(hw);

        return ret_val;
}

/**
 *  e1000_configure_k1_ich8lan - Configure K1 power state
 *  @hw: pointer to the HW structure
 *  @enable: K1 state to configure
 *
 *  Configure the K1 power state based on the provided parameter.
 *  Assumes semaphore already acquired.
 *
 *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
 **/
s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
{
        s32 ret_val;
        u32 ctrl_reg = 0;
        u32 ctrl_ext = 0;
        u32 reg = 0;
        u16 kmrn_reg = 0;

        ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
                                              &kmrn_reg);
        if (ret_val)
                return ret_val;

        if (k1_enable)
                kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
        else
                kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;

        ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
                                               kmrn_reg);
        if (ret_val)
                return ret_val;

        usleep_range(20, 40);
        ctrl_ext = er32(CTRL_EXT);
        ctrl_reg = er32(CTRL);

        reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
        reg |= E1000_CTRL_FRCSPD;
        ew32(CTRL, reg);

        ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
        e1e_flush();
        usleep_range(20, 40);
        ew32(CTRL, ctrl_reg);
        ew32(CTRL_EXT, ctrl_ext);
        e1e_flush();
        usleep_range(20, 40);

        return 0;
}

/**
 *  e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
 *  @hw:       pointer to the HW structure
 *  @d0_state: boolean if entering d0 or d3 device state
 *
 *  SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
 *  collectively called OEM bits.  The OEM Write Enable bit and SW Config bit
 *  in NVM determines whether HW should configure LPLU and Gbe Disable.
 **/
static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
{
        s32 ret_val = 0;
        u32 mac_reg;
        u16 oem_reg;

        if (hw->mac.type < e1000_pchlan)
                return ret_val;

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;

        if (hw->mac.type == e1000_pchlan) {
                mac_reg = er32(EXTCNF_CTRL);
                if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
                        goto release;
        }

        mac_reg = er32(FEXTNVM);
        if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
                goto release;

        mac_reg = er32(PHY_CTRL);

        ret_val = e1e_rphy_locked(hw, HV_OEM_BITS, &oem_reg);
        if (ret_val)
                goto release;

        oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);

        if (d0_state) {
                if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
                        oem_reg |= HV_OEM_BITS_GBE_DIS;

                if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
                        oem_reg |= HV_OEM_BITS_LPLU;
        } else {
                if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
                               E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
                        oem_reg |= HV_OEM_BITS_GBE_DIS;

                if (mac_reg & (E1000_PHY_CTRL_D0A_LPLU |
                               E1000_PHY_CTRL_NOND0A_LPLU))
                        oem_reg |= HV_OEM_BITS_LPLU;
        }

        /* Set Restart auto-neg to activate the bits */
        if ((d0_state || (hw->mac.type != e1000_pchlan)) &&
            !hw->phy.ops.check_reset_block(hw))
                oem_reg |= HV_OEM_BITS_RESTART_AN;

        ret_val = e1e_wphy_locked(hw, HV_OEM_BITS, oem_reg);

release:
        hw->phy.ops.release(hw);

        return ret_val;
}

/**
 *  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
 *  @hw:   pointer to the HW structure
 **/
static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
{
        s32 ret_val;
        u16 data;

        ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
        if (ret_val)
                return ret_val;

        data |= HV_KMRN_MDIO_SLOW;

        ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);

        return ret_val;
}

/**
 *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
 *  done after every PHY reset.
 **/
static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val = 0;
        u16 phy_data;

        if (hw->mac.type != e1000_pchlan)
                return 0;

        /* Set MDIO slow mode before any other MDIO access */
        if (hw->phy.type == e1000_phy_82577) {
                ret_val = e1000_set_mdio_slow_mode_hv(hw);
                if (ret_val)
                        return ret_val;
        }

        if (((hw->phy.type == e1000_phy_82577) &&
             ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
            ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
                /* Disable generation of early preamble */
                ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
                if (ret_val)
                        return ret_val;

                /* Preamble tuning for SSC */
                ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
                if (ret_val)
                        return ret_val;
        }

        if (hw->phy.type == e1000_phy_82578) {
                /* Return registers to default by doing a soft reset then
                 * writing 0x3140 to the control register.
                 */
                if (hw->phy.revision < 2) {
                        e1000e_phy_sw_reset(hw);
                        ret_val = e1e_wphy(hw, MII_BMCR, 0x3140);
                }
        }

        /* Select page 0 */
        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;

        hw->phy.addr = 1;
        ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
        hw->phy.ops.release(hw);
        if (ret_val)
                return ret_val;

        /* Configure the K1 Si workaround during phy reset assuming there is
         * link so that it disables K1 if link is in 1Gbps.
         */
        ret_val = e1000_k1_gig_workaround_hv(hw, true);
        if (ret_val)
                return ret_val;

        /* Workaround for link disconnects on a busy hub in half duplex */
        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;
        ret_val = e1e_rphy_locked(hw, BM_PORT_GEN_CFG, &phy_data);
        if (ret_val)
                goto release;
        ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF);
        if (ret_val)
                goto release;

        /* set MSE higher to enable link to stay up when noise is high */
        ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034);
release:
        hw->phy.ops.release(hw);

        return ret_val;
}

/**
 *  e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
 *  @hw:   pointer to the HW structure
 **/
void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
{
        u32 mac_reg;
        u16 i, phy_reg = 0;
        s32 ret_val;

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return;
        ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
        if (ret_val)
                goto release;

        /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */
        for (i = 0; i < (hw->mac.rar_entry_count); i++) {
                mac_reg = er32(RAL(i));
                hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
                                           (u16)(mac_reg & 0xFFFF));
                hw->phy.ops.write_reg_page(hw, BM_RAR_M(i),
                                           (u16)((mac_reg >> 16) & 0xFFFF));

                mac_reg = er32(RAH(i));
                hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
                                           (u16)(mac_reg & 0xFFFF));
                hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
                                           (u16)((mac_reg & E1000_RAH_AV)
                                                 >> 16));
        }

        e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);

release:
        hw->phy.ops.release(hw);
}

/**
 *  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
 *  with 82579 PHY
 *  @hw: pointer to the HW structure
 *  @enable: flag to enable/disable workaround when enabling/disabling jumbos
 **/
s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
{
        s32 ret_val = 0;
        u16 phy_reg, data;
        u32 mac_reg;
        u16 i;

        if (hw->mac.type < e1000_pch2lan)
                return 0;

        /* disable Rx path while enabling/disabling workaround */
        e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
        ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | BIT(14));
        if (ret_val)
                return ret_val;

        if (enable) {
                /* Write Rx addresses (rar_entry_count for RAL/H, and
                 * SHRAL/H) and initial CRC values to the MAC
                 */
                for (i = 0; i < hw->mac.rar_entry_count; i++) {
                        u8 mac_addr[ETH_ALEN] = { 0 };
                        u32 addr_high, addr_low;

                        addr_high = er32(RAH(i));
                        if (!(addr_high & E1000_RAH_AV))
                                continue;
                        addr_low = er32(RAL(i));
                        mac_addr[0] = (addr_low & 0xFF);
                        mac_addr[1] = ((addr_low >> 8) & 0xFF);
                        mac_addr[2] = ((addr_low >> 16) & 0xFF);
                        mac_addr[3] = ((addr_low >> 24) & 0xFF);
                        mac_addr[4] = (addr_high & 0xFF);
                        mac_addr[5] = ((addr_high >> 8) & 0xFF);

                        ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
                }

                /* Write Rx addresses to the PHY */
                e1000_copy_rx_addrs_to_phy_ich8lan(hw);

                /* Enable jumbo frame workaround in the MAC */
                mac_reg = er32(FFLT_DBG);
                mac_reg &= ~BIT(14);
                mac_reg |= (7 << 15);
                ew32(FFLT_DBG, mac_reg);

                mac_reg = er32(RCTL);
                mac_reg |= E1000_RCTL_SECRC;
                ew32(RCTL, mac_reg);

                ret_val = e1000e_read_kmrn_reg(hw,
                                               E1000_KMRNCTRLSTA_CTRL_OFFSET,
                                               &data);
                if (ret_val)
                        return ret_val;
                ret_val = e1000e_write_kmrn_reg(hw,
                                                E1000_KMRNCTRLSTA_CTRL_OFFSET,
                                                data | BIT(0));
                if (ret_val)
                        return ret_val;
                ret_val = e1000e_read_kmrn_reg(hw,
                                               E1000_KMRNCTRLSTA_HD_CTRL,
                                               &data);
                if (ret_val)
                        return ret_val;
                data &= ~(0xF << 8);
                data |= (0xB << 8);
                ret_val = e1000e_write_kmrn_reg(hw,
                                                E1000_KMRNCTRLSTA_HD_CTRL,
                                                data);
                if (ret_val)
                        return ret_val;

                /* Enable jumbo frame workaround in the PHY */
                e1e_rphy(hw, PHY_REG(769, 23), &data);
                data &= ~(0x7F << 5);
                data |= (0x37 << 5);
                ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
                if (ret_val)
                        return ret_val;
                e1e_rphy(hw, PHY_REG(769, 16), &data);
                data &= ~BIT(13);
                ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
                if (ret_val)
                        return ret_val;
                e1e_rphy(hw, PHY_REG(776, 20), &data);
                data &= ~(0x3FF << 2);
                data |= (E1000_TX_PTR_GAP << 2);
                ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
                if (ret_val)
                        return ret_val;
                ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xF100);
                if (ret_val)
                        return ret_val;
                e1e_rphy(hw, HV_PM_CTRL, &data);
                ret_val = e1e_wphy(hw, HV_PM_CTRL, data | BIT(10));
                if (ret_val)
                        return ret_val;
        } else {
                /* Write MAC register values back to h/w defaults */
                mac_reg = er32(FFLT_DBG);
                mac_reg &= ~(0xF << 14);
                ew32(FFLT_DBG, mac_reg);

                mac_reg = er32(RCTL);
                mac_reg &= ~E1000_RCTL_SECRC;
                ew32(RCTL, mac_reg);

                ret_val = e1000e_read_kmrn_reg(hw,
                                               E1000_KMRNCTRLSTA_CTRL_OFFSET,
                                               &data);
                if (ret_val)
                        return ret_val;
                ret_val = e1000e_write_kmrn_reg(hw,
                                                E1000_KMRNCTRLSTA_CTRL_OFFSET,
                                                data & ~BIT(0));
                if (ret_val)
                        return ret_val;
                ret_val = e1000e_read_kmrn_reg(hw,
                                               E1000_KMRNCTRLSTA_HD_CTRL,
                                               &data);
                if (ret_val)
                        return ret_val;
                data &= ~(0xF << 8);
                data |= (0xB << 8);
                ret_val = e1000e_write_kmrn_reg(hw,
                                                E1000_KMRNCTRLSTA_HD_CTRL,
                                                data);
                if (ret_val)
                        return ret_val;

                /* Write PHY register values back to h/w defaults */
                e1e_rphy(hw, PHY_REG(769, 23), &data);
                data &= ~(0x7F << 5);
                ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
                if (ret_val)
                        return ret_val;
                e1e_rphy(hw, PHY_REG(769, 16), &data);
                data |= BIT(13);
                ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
                if (ret_val)
                        return ret_val;
                e1e_rphy(hw, PHY_REG(776, 20), &data);
                data &= ~(0x3FF << 2);
                data |= (0x8 << 2);
                ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
                if (ret_val)
                        return ret_val;
                ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
                if (ret_val)
                        return ret_val;
                e1e_rphy(hw, HV_PM_CTRL, &data);
                ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~BIT(10));
                if (ret_val)
                        return ret_val;
        }

        /* re-enable Rx path after enabling/disabling workaround */
        return e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~BIT(14));
}

/**
 *  e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
 *  done after every PHY reset.
 **/
static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val = 0;

        if (hw->mac.type != e1000_pch2lan)
                return 0;

        /* Set MDIO slow mode before any other MDIO access */
        ret_val = e1000_set_mdio_slow_mode_hv(hw);
        if (ret_val)
                return ret_val;

        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;
        /* set MSE higher to enable link to stay up when noise is high */
        ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034);
        if (ret_val)
                goto release;
        /* drop link after 5 times MSE threshold was reached */
        ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005);
release:
        hw->phy.ops.release(hw);

        return ret_val;
}

/**
 *  e1000_k1_gig_workaround_lv - K1 Si workaround
 *  @hw:   pointer to the HW structure
 *
 *  Workaround to set the K1 beacon duration for 82579 parts in 10Mbps
 *  Disable K1 in 1000Mbps and 100Mbps
 **/
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
{
        s32 ret_val = 0;
        u16 status_reg = 0;

        if (hw->mac.type != e1000_pch2lan)
                return 0;

        /* Set K1 beacon duration based on 10Mbs speed */
        ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
        if (ret_val)
                return ret_val;

        if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
            == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
                if (status_reg &
                    (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) {
                        u16 pm_phy_reg;

                        /* LV 1G/100 Packet drop issue wa  */
                        ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg);
                        if (ret_val)
                                return ret_val;
                        pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE;
                        ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg);
                        if (ret_val)
                                return ret_val;
                } else {
                        u32 mac_reg;

                        mac_reg = er32(FEXTNVM4);
                        mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
                        mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
                        ew32(FEXTNVM4, mac_reg);
                }
        }

        return ret_val;
}

/**
 *  e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
 *  @hw:   pointer to the HW structure
 *  @gate: boolean set to true to gate, false to ungate
 *
 *  Gate/ungate the automatic PHY configuration via hardware; perform
 *  the configuration via software instead.
 **/
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
{
        u32 extcnf_ctrl;

        if (hw->mac.type < e1000_pch2lan)
                return;

        extcnf_ctrl = er32(EXTCNF_CTRL);

        if (gate)
                extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
        else
                extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;

        ew32(EXTCNF_CTRL, extcnf_ctrl);
}

/**
 *  e1000_lan_init_done_ich8lan - Check for PHY config completion
 *  @hw: pointer to the HW structure
 *
 *  Check the appropriate indication the MAC has finished configuring the
 *  PHY after a software reset.
 **/
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
{
        u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;

        /* Wait for basic configuration completes before proceeding */
        do {
                data = er32(STATUS);
                data &= E1000_STATUS_LAN_INIT_DONE;
                usleep_range(100, 200);
        } while ((!data) && --loop);

        /* If basic configuration is incomplete before the above loop
         * count reaches 0, loading the configuration from NVM will
         * leave the PHY in a bad state possibly resulting in no link.
         */
        if (loop == 0)
                e_dbg("LAN_INIT_DONE not set, increase timeout\n");

        /* Clear the Init Done bit for the next init event */
        data = er32(STATUS);
        data &= ~E1000_STATUS_LAN_INIT_DONE;
        ew32(STATUS, data);
}

/**
 *  e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset
 *  @hw: pointer to the HW structure
 **/
static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val = 0;
        u16 reg;

        if (hw->phy.ops.check_reset_block(hw))
                return 0;

        /* Allow time for h/w to get to quiescent state after reset */
        usleep_range(10000, 20000);

        /* Perform any necessary post-reset workarounds */
        switch (hw->mac.type) {
        case e1000_pchlan:
                ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
                if (ret_val)
                        return ret_val;
                break;
        case e1000_pch2lan:
                ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
                if (ret_val)
                        return ret_val;
                break;
        default:
                break;
        }

        /* Clear the host wakeup bit after lcd reset */
        if (hw->mac.type >= e1000_pchlan) {
                e1e_rphy(hw, BM_PORT_GEN_CFG, &reg);
                reg &= ~BM_WUC_HOST_WU_BIT;
                e1e_wphy(hw, BM_PORT_GEN_CFG, reg);
        }

        /* Configure the LCD with the extended configuration region in NVM */
        ret_val = e1000_sw_lcd_config_ich8lan(hw);
        if (ret_val)
                return ret_val;

        /* Configure the LCD with the OEM bits in NVM */
        ret_val = e1000_oem_bits_config_ich8lan(hw, true);

        if (hw->mac.type == e1000_pch2lan) {
                /* Ungate automatic PHY configuration on non-managed 82579 */
                if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
                        usleep_range(10000, 20000);
                        e1000_gate_hw_phy_config_ich8lan(hw, false);
                }

                /* Set EEE LPI Update Timer to 200usec */
                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return ret_val;
                ret_val = e1000_write_emi_reg_locked(hw,
                                                     I82579_LPI_UPDATE_TIMER,
                                                     0x1387);
                hw->phy.ops.release(hw);
        }

        return ret_val;
}

/**
 *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
 *  @hw: pointer to the HW structure
 *
 *  Resets the PHY
 *  This is a function pointer entry point called by drivers
 *  or other shared routines.
 **/
static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val = 0;

        /* Gate automatic PHY configuration by hardware on non-managed 82579 */
        if ((hw->mac.type == e1000_pch2lan) &&
            !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
                e1000_gate_hw_phy_config_ich8lan(hw, true);

        ret_val = e1000e_phy_hw_reset_generic(hw);
        if (ret_val)
                return ret_val;

        return e1000_post_phy_reset_ich8lan(hw);
}

/**
 *  e1000_set_lplu_state_pchlan - Set Low Power Link Up state
 *  @hw: pointer to the HW structure
 *  @active: true to enable LPLU, false to disable
 *
 *  Sets the LPLU state according to the active flag.  For PCH, if OEM write
 *  bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
 *  the phy speed. This function will manually set the LPLU bit and restart
 *  auto-neg as hw would do. D3 and D0 LPLU will call the same function
 *  since it configures the same bit.
 **/
static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
{
        s32 ret_val;
        u16 oem_reg;

        ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
        if (ret_val)
                return ret_val;

        if (active)
                oem_reg |= HV_OEM_BITS_LPLU;
        else
                oem_reg &= ~HV_OEM_BITS_LPLU;

        if (!hw->phy.ops.check_reset_block(hw))
                oem_reg |= HV_OEM_BITS_RESTART_AN;

        return e1e_wphy(hw, HV_OEM_BITS, oem_reg);
}

/**
 *  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
 *  @hw: pointer to the HW structure
 *  @active: true to enable LPLU, false to disable
 *
 *  Sets the LPLU D0 state according to the active flag.  When
 *  activating LPLU this function also disables smart speed
 *  and vice versa.  LPLU will not be activated unless the
 *  device autonegotiation advertisement meets standards of
 *  either 10 or 10/100 or 10/100/1000 at all duplexes.
 *  This is a function pointer entry point only called by
 *  PHY setup routines.
 **/
static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
{
        struct e1000_phy_info *phy = &hw->phy;
        u32 phy_ctrl;
        s32 ret_val = 0;
        u16 data;

        if (phy->type == e1000_phy_ife)
                return 0;

        phy_ctrl = er32(PHY_CTRL);

        if (active) {
                phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
                ew32(PHY_CTRL, phy_ctrl);

                if (phy->type != e1000_phy_igp_3)
                        return 0;

                /* Call gig speed drop workaround on LPLU before accessing
                 * any PHY registers
                 */
                if (hw->mac.type == e1000_ich8lan)
                        e1000e_gig_downshift_workaround_ich8lan(hw);

                /* When LPLU is enabled, we should disable SmartSpeed */
                ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
                if (ret_val)
                        return ret_val;
                data &= ~IGP01E1000_PSCFR_SMART_SPEED;
                ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
                if (ret_val)
                        return ret_val;
        } else {
                phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
                ew32(PHY_CTRL, phy_ctrl);

                if (phy->type != e1000_phy_igp_3)
                        return 0;

                /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
                 * during Dx states where the power conservation is most
                 * important.  During driver activity we should enable
                 * SmartSpeed, so performance is maintained.
                 */
                if (phy->smart_speed == e1000_smart_speed_on) {
                        ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           &data);
                        if (ret_val)
                                return ret_val;

                        data |= IGP01E1000_PSCFR_SMART_SPEED;
                        ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           data);
                        if (ret_val)
                                return ret_val;
                } else if (phy->smart_speed == e1000_smart_speed_off) {
                        ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           &data);
                        if (ret_val)
                                return ret_val;

                        data &= ~IGP01E1000_PSCFR_SMART_SPEED;
                        ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           data);
                        if (ret_val)
                                return ret_val;
                }
        }

        return 0;
}

/**
 *  e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
 *  @hw: pointer to the HW structure
 *  @active: true to enable LPLU, false to disable
 *
 *  Sets the LPLU D3 state according to the active flag.  When
 *  activating LPLU this function also disables smart speed
 *  and vice versa.  LPLU will not be activated unless the
 *  device autonegotiation advertisement meets standards of
 *  either 10 or 10/100 or 10/100/1000 at all duplexes.
 *  This is a function pointer entry point only called by
 *  PHY setup routines.
 **/
static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
{
        struct e1000_phy_info *phy = &hw->phy;
        u32 phy_ctrl;
        s32 ret_val = 0;
        u16 data;

        phy_ctrl = er32(PHY_CTRL);

        if (!active) {
                phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
                ew32(PHY_CTRL, phy_ctrl);

                if (phy->type != e1000_phy_igp_3)
                        return 0;

                /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
                 * during Dx states where the power conservation is most
                 * important.  During driver activity we should enable
                 * SmartSpeed, so performance is maintained.
                 */
                if (phy->smart_speed == e1000_smart_speed_on) {
                        ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           &data);
                        if (ret_val)
                                return ret_val;

                        data |= IGP01E1000_PSCFR_SMART_SPEED;
                        ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           data);
                        if (ret_val)
                                return ret_val;
                } else if (phy->smart_speed == e1000_smart_speed_off) {
                        ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           &data);
                        if (ret_val)
                                return ret_val;

                        data &= ~IGP01E1000_PSCFR_SMART_SPEED;
                        ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           data);
                        if (ret_val)
                                return ret_val;
                }
        } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
                   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
                   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
                phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
                ew32(PHY_CTRL, phy_ctrl);

                if (phy->type != e1000_phy_igp_3)
                        return 0;

                /* Call gig speed drop workaround on LPLU before accessing
                 * any PHY registers
                 */
                if (hw->mac.type == e1000_ich8lan)
                        e1000e_gig_downshift_workaround_ich8lan(hw);

                /* When LPLU is enabled, we should disable SmartSpeed */
                ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
                if (ret_val)
                        return ret_val;

                data &= ~IGP01E1000_PSCFR_SMART_SPEED;
                ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
        }

        return ret_val;
}

/**
 *  e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
 *  @hw: pointer to the HW structure
 *  @bank:  pointer to the variable that returns the active bank
 *
 *  Reads signature byte from the NVM using the flash access registers.
 *  Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank.
 **/
static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
{
        u32 eecd;
        struct e1000_nvm_info *nvm = &hw->nvm;
        u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
        u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
        u32 nvm_dword = 0;
        u8 sig_byte = 0;
        s32 ret_val;

        switch (hw->mac.type) {
        case e1000_pch_spt:
                bank1_offset = nvm->flash_bank_size;
                act_offset = E1000_ICH_NVM_SIG_WORD;

                /* set bank to 0 in case flash read fails */
                *bank = 0;

                /* Check bank 0 */
                ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset,
                                                         &nvm_dword);
                if (ret_val)
                        return ret_val;
                sig_byte = (u8)((nvm_dword & 0xFF00) >> 8);
                if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
                    E1000_ICH_NVM_SIG_VALUE) {
                        *bank = 0;
                        return 0;
                }

                /* Check bank 1 */
                ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset +
                                                         bank1_offset,
                                                         &nvm_dword);
                if (ret_val)
                        return ret_val;
                sig_byte = (u8)((nvm_dword & 0xFF00) >> 8);
                if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
                    E1000_ICH_NVM_SIG_VALUE) {
                        *bank = 1;
                        return 0;
                }

                e_dbg("ERROR: No valid NVM bank present\n");
                return -E1000_ERR_NVM;
        case e1000_ich8lan:
        case e1000_ich9lan:
                eecd = er32(EECD);
                if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) ==
                    E1000_EECD_SEC1VAL_VALID_MASK) {
                        if (eecd & E1000_EECD_SEC1VAL)
                                *bank = 1;
                        else
                                *bank = 0;

                        return 0;
                }
                e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n");
                /* fall-thru */
        default:
                /* set bank to 0 in case flash read fails */
                *bank = 0;

                /* Check bank 0 */
                ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
                                                        &sig_byte);
                if (ret_val)
                        return ret_val;
                if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
                    E1000_ICH_NVM_SIG_VALUE) {
                        *bank = 0;
                        return 0;
                }

                /* Check bank 1 */
                ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
                                                        bank1_offset,
                                                        &sig_byte);
                if (ret_val)
                        return ret_val;
                if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
                    E1000_ICH_NVM_SIG_VALUE) {
                        *bank = 1;
                        return 0;
                }

                e_dbg("ERROR: No valid NVM bank present\n");
                return -E1000_ERR_NVM;
        }
}

/**
 *  e1000_read_nvm_spt - NVM access for SPT
 *  @hw: pointer to the HW structure
 *  @offset: The offset (in bytes) of the word(s) to read.
 *  @words: Size of data to read in words.
 *  @data: pointer to the word(s) to read at offset.
 *
 *  Reads a word(s) from the NVM
 **/
static s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words,
                              u16 *data)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 act_offset;
        s32 ret_val = 0;
        u32 bank = 0;
        u32 dword = 0;
        u16 offset_to_read;
        u16 i;

        if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
            (words == 0)) {
                e_dbg("nvm parameter(s) out of bounds\n");
                ret_val = -E1000_ERR_NVM;
                goto out;
        }

        nvm->ops.acquire(hw);

        ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
        if (ret_val) {
                e_dbg("Could not detect valid bank, assuming bank 0\n");
                bank = 0;
        }

        act_offset = (bank) ? nvm->flash_bank_size : 0;
        act_offset += offset;

        ret_val = 0;

        for (i = 0; i < words; i += 2) {
                if (words - i == 1) {
                        if (dev_spec->shadow_ram[offset + i].modified) {
                                data[i] =
                                    dev_spec->shadow_ram[offset + i].value;
                        } else {
                                offset_to_read = act_offset + i -
                                    ((act_offset + i) % 2);
                                ret_val =
                                  e1000_read_flash_dword_ich8lan(hw,
                                                                 offset_to_read,
                                                                 &dword);
                                if (ret_val)
                                        break;
                                if ((act_offset + i) % 2 == 0)
                                        data[i] = (u16)(dword & 0xFFFF);
                                else
                                        data[i] = (u16)((dword >> 16) & 0xFFFF);
                        }
                } else {
                        offset_to_read = act_offset + i;
                        if (!(dev_spec->shadow_ram[offset + i].modified) ||
                            !(dev_spec->shadow_ram[offset + i + 1].modified)) {
                                ret_val =
                                  e1000_read_flash_dword_ich8lan(hw,
                                                                 offset_to_read,
                                                                 &dword);
                                if (ret_val)
                                        break;
                        }
                        if (dev_spec->shadow_ram[offset + i].modified)
                                data[i] =
                                    dev_spec->shadow_ram[offset + i].value;
                        else
                                data[i] = (u16)(dword & 0xFFFF);
                        if (dev_spec->shadow_ram[offset + i].modified)
                                data[i + 1] =
                                    dev_spec->shadow_ram[offset + i + 1].value;
                        else
                                data[i + 1] = (u16)(dword >> 16 & 0xFFFF);
                }
        }

        nvm->ops.release(hw);

out:
        if (ret_val)
                e_dbg("NVM read error: %d\n", ret_val);

        return ret_val;
}

/**
 *  e1000_read_nvm_ich8lan - Read word(s) from the NVM
 *  @hw: pointer to the HW structure
 *  @offset: The offset (in bytes) of the word(s) to read.
 *  @words: Size of data to read in words
 *  @data: Pointer to the word(s) to read at offset.
 *
 *  Reads a word(s) from the NVM using the flash access registers.
 **/
static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
                                  u16 *data)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 act_offset;
        s32 ret_val = 0;
        u32 bank = 0;
        u16 i, word;

        if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
            (words == 0)) {
                e_dbg("nvm parameter(s) out of bounds\n");
                ret_val = -E1000_ERR_NVM;
                goto out;
        }

        nvm->ops.acquire(hw);

        ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
        if (ret_val) {
                e_dbg("Could not detect valid bank, assuming bank 0\n");
                bank = 0;
        }

        act_offset = (bank) ? nvm->flash_bank_size : 0;
        act_offset += offset;

        ret_val = 0;
        for (i = 0; i < words; i++) {
                if (dev_spec->shadow_ram[offset + i].modified) {
                        data[i] = dev_spec->shadow_ram[offset + i].value;
                } else {
                        ret_val = e1000_read_flash_word_ich8lan(hw,
                                                                act_offset + i,
                                                                &word);
                        if (ret_val)
                                break;
                        data[i] = word;
                }
        }

        nvm->ops.release(hw);

out:
        if (ret_val)
                e_dbg("NVM read error: %d\n", ret_val);

        return ret_val;
}

/**
 *  e1000_flash_cycle_init_ich8lan - Initialize flash
 *  @hw: pointer to the HW structure
 *
 *  This function does initial flash setup so that a new read/write/erase cycle
 *  can be started.
 **/
static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
{
        union ich8_hws_flash_status hsfsts;
        s32 ret_val = -E1000_ERR_NVM;

        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);

        /* Check if the flash descriptor is valid */
        if (!hsfsts.hsf_status.fldesvalid) {
                e_dbg("Flash descriptor invalid.  SW Sequencing must be used.\n");
                return -E1000_ERR_NVM;
        }

        /* Clear FCERR and DAEL in hw status by writing 1 */
        hsfsts.hsf_status.flcerr = 1;
        hsfsts.hsf_status.dael = 1;
        if (hw->mac.type == e1000_pch_spt)
                ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF);
        else
                ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);

        /* Either we should have a hardware SPI cycle in progress
         * bit to check against, in order to start a new cycle or
         * FDONE bit should be changed in the hardware so that it
         * is 1 after hardware reset, which can then be used as an
         * indication whether a cycle is in progress or has been
         * completed.
         */

        if (!hsfsts.hsf_status.flcinprog) {
                /* There is no cycle running at present,
                 * so we can start a cycle.
                 * Begin by setting Flash Cycle Done.
                 */
                hsfsts.hsf_status.flcdone = 1;
                if (hw->mac.type == e1000_pch_spt)
                        ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF);
                else
                        ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
                ret_val = 0;
        } else {
                s32 i;

                /* Otherwise poll for sometime so the current
                 * cycle has a chance to end before giving up.
                 */
                for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
                        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
                        if (!hsfsts.hsf_status.flcinprog) {
                                ret_val = 0;
                                break;
                        }
                        udelay(1);
                }
                if (!ret_val) {
                        /* Successful in waiting for previous cycle to timeout,
                         * now set the Flash Cycle Done.
                         */
                        hsfsts.hsf_status.flcdone = 1;
                        if (hw->mac.type == e1000_pch_spt)
                                ew32flash(ICH_FLASH_HSFSTS,
                                          hsfsts.regval & 0xFFFF);
                        else
                                ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
                } else {
                        e_dbg("Flash controller busy, cannot get access\n");
                }
        }

        return ret_val;
}

/**
 *  e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
 *  @hw: pointer to the HW structure
 *  @timeout: maximum time to wait for completion
 *
 *  This function starts a flash cycle and waits for its completion.
 **/
static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
{
        union ich8_hws_flash_ctrl hsflctl;
        union ich8_hws_flash_status hsfsts;
        u32 i = 0;

        /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
        if (hw->mac.type == e1000_pch_spt)
                hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16;
        else
                hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
        hsflctl.hsf_ctrl.flcgo = 1;

        if (hw->mac.type == e1000_pch_spt)
                ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16);
        else
                ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);

        /* wait till FDONE bit is set to 1 */
        do {
                hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
                if (hsfsts.hsf_status.flcdone)
                        break;
                udelay(1);
        } while (i++ < timeout);

        if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr)
                return 0;

        return -E1000_ERR_NVM;
}

/**
 *  e1000_read_flash_dword_ich8lan - Read dword from flash
 *  @hw: pointer to the HW structure
 *  @offset: offset to data location
 *  @data: pointer to the location for storing the data
 *
 *  Reads the flash dword at offset into data.  Offset is converted
 *  to bytes before read.
 **/
static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, u32 offset,
                                          u32 *data)
{
        /* Must convert word offset into bytes. */
        offset <<= 1;
        return e1000_read_flash_data32_ich8lan(hw, offset, data);
}

/**
 *  e1000_read_flash_word_ich8lan - Read word from flash
 *  @hw: pointer to the HW structure
 *  @offset: offset to data location
 *  @data: pointer to the location for storing the data
 *
 *  Reads the flash word at offset into data.  Offset is converted
 *  to bytes before read.
 **/
static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
                                         u16 *data)
{
        /* Must convert offset into bytes. */
        offset <<= 1;

        return e1000_read_flash_data_ich8lan(hw, offset, 2, data);
}

/**
 *  e1000_read_flash_byte_ich8lan - Read byte from flash
 *  @hw: pointer to the HW structure
 *  @offset: The offset of the byte to read.
 *  @data: Pointer to a byte to store the value read.
 *
 *  Reads a single byte from the NVM using the flash access registers.
 **/
static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
                                         u8 *data)
{
        s32 ret_val;
        u16 word = 0;

        /* In SPT, only 32 bits access is supported,
         * so this function should not be called.
         */
        if (hw->mac.type == e1000_pch_spt)
                return -E1000_ERR_NVM;
        else
                ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);

        if (ret_val)
                return ret_val;

        *data = (u8)word;

        return 0;
}

/**
 *  e1000_read_flash_data_ich8lan - Read byte or word from NVM
 *  @hw: pointer to the HW structure
 *  @offset: The offset (in bytes) of the byte or word to read.
 *  @size: Size of data to read, 1=byte 2=word
 *  @data: Pointer to the word to store the value read.
 *
 *  Reads a byte or word from the NVM using the flash access registers.
 **/
static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
                                         u8 size, u16 *data)
{
        union ich8_hws_flash_status hsfsts;
        union ich8_hws_flash_ctrl hsflctl;
        u32 flash_linear_addr;
        u32 flash_data = 0;
        s32 ret_val = -E1000_ERR_NVM;
        u8 count = 0;

        if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
                return -E1000_ERR_NVM;

        flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
                             hw->nvm.flash_base_addr);

        do {
                udelay(1);
                /* Steps */
                ret_val = e1000_flash_cycle_init_ich8lan(hw);
                if (ret_val)
                        break;

                hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
                /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
                hsflctl.hsf_ctrl.fldbcount = size - 1;
                hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
                ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);

                ew32flash(ICH_FLASH_FADDR, flash_linear_addr);

                ret_val =
                    e1000_flash_cycle_ich8lan(hw,
                                              ICH_FLASH_READ_COMMAND_TIMEOUT);

                /* Check if FCERR is set to 1, if set to 1, clear it
                 * and try the whole sequence a few more times, else
                 * read in (shift in) the Flash Data0, the order is
                 * least significant byte first msb to lsb
                 */
                if (!ret_val) {
                        flash_data = er32flash(ICH_FLASH_FDATA0);
                        if (size == 1)
                                *data = (u8)(flash_data & 0x000000FF);
                        else if (size == 2)
                                *data = (u16)(flash_data & 0x0000FFFF);
                        break;
                } else {
                        /* If we've gotten here, then things are probably
                         * completely hosed, but if the error condition is
                         * detected, it won't hurt to give it another try...
                         * ICH_FLASH_CYCLE_REPEAT_COUNT times.
                         */
                        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
                        if (hsfsts.hsf_status.flcerr) {
                                /* Repeat for some time before giving up. */
                                continue;
                        } else if (!hsfsts.hsf_status.flcdone) {
                                e_dbg("Timeout error - flash cycle did not complete.\n");
                                break;
                        }
                }
        } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);

        return ret_val;
}

/**
 *  e1000_read_flash_data32_ich8lan - Read dword from NVM
 *  @hw: pointer to the HW structure
 *  @offset: The offset (in bytes) of the dword to read.
 *  @data: Pointer to the dword to store the value read.
 *
 *  Reads a byte or word from the NVM using the flash access registers.
 **/

static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
                                           u32 *data)
{
        union ich8_hws_flash_status hsfsts;
        union ich8_hws_flash_ctrl hsflctl;
        u32 flash_linear_addr;
        s32 ret_val = -E1000_ERR_NVM;
        u8 count = 0;

        if (offset > ICH_FLASH_LINEAR_ADDR_MASK ||
            hw->mac.type != e1000_pch_spt)
                return -E1000_ERR_NVM;
        flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
                             hw->nvm.flash_base_addr);

        do {
                udelay(1);
                /* Steps */
                ret_val = e1000_flash_cycle_init_ich8lan(hw);
                if (ret_val)
                        break;
                /* In SPT, This register is in Lan memory space, not flash.
                 * Therefore, only 32 bit access is supported
                 */
                hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16;

                /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
                hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1;
                hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
                /* In SPT, This register is in Lan memory space, not flash.
                 * Therefore, only 32 bit access is supported
                 */
                ew32flash(ICH_FLASH_HSFSTS, (u32)hsflctl.regval << 16);
                ew32flash(ICH_FLASH_FADDR, flash_linear_addr);

                ret_val =
                   e1000_flash_cycle_ich8lan(hw,
                                             ICH_FLASH_READ_COMMAND_TIMEOUT);

                /* Check if FCERR is set to 1, if set to 1, clear it
                 * and try the whole sequence a few more times, else
                 * read in (shift in) the Flash Data0, the order is
                 * least significant byte first msb to lsb
                 */
                if (!ret_val) {
                        *data = er32flash(ICH_FLASH_FDATA0);
                        break;
                } else {
                        /* If we've gotten here, then things are probably
                         * completely hosed, but if the error condition is
                         * detected, it won't hurt to give it another try...
                         * ICH_FLASH_CYCLE_REPEAT_COUNT times.
                         */
                        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
                        if (hsfsts.hsf_status.flcerr) {
                                /* Repeat for some time before giving up. */
                                continue;
                        } else if (!hsfsts.hsf_status.flcdone) {
                                e_dbg("Timeout error - flash cycle did not complete.\n");
                                break;
                        }
                }
        } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);

        return ret_val;
}

/**
 *  e1000_write_nvm_ich8lan - Write word(s) to the NVM
 *  @hw: pointer to the HW structure
 *  @offset: The offset (in bytes) of the word(s) to write.
 *  @words: Size of data to write in words
 *  @data: Pointer to the word(s) to write at offset.
 *
 *  Writes a byte or word to the NVM using the flash access registers.
 **/
static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
                                   u16 *data)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u16 i;

        if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
            (words == 0)) {
                e_dbg("nvm parameter(s) out of bounds\n");
                return -E1000_ERR_NVM;
        }

        nvm->ops.acquire(hw);

        for (i = 0; i < words; i++) {
                dev_spec->shadow_ram[offset + i].modified = true;
                dev_spec->shadow_ram[offset + i].value = data[i];
        }

        nvm->ops.release(hw);

        return 0;
}

/**
 *  e1000_update_nvm_checksum_spt - Update the checksum for NVM
 *  @hw: pointer to the HW structure
 *
 *  The NVM checksum is updated by calling the generic update_nvm_checksum,
 *  which writes the checksum to the shadow ram.  The changes in the shadow
 *  ram are then committed to the EEPROM by processing each bank at a time
 *  checking for the modified bit and writing only the pending changes.
 *  After a successful commit, the shadow ram is cleared and is ready for
 *  future writes.
 **/
static s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
        s32 ret_val;
        u32 dword = 0;

        ret_val = e1000e_update_nvm_checksum_generic(hw);
        if (ret_val)
                goto out;

        if (nvm->type != e1000_nvm_flash_sw)
                goto out;

        nvm->ops.acquire(hw);

        /* We're writing to the opposite bank so if we're on bank 1,
         * write to bank 0 etc.  We also need to erase the segment that
         * is going to be written
         */
        ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
        if (ret_val) {
                e_dbg("Could not detect valid bank, assuming bank 0\n");
                bank = 0;
        }

        if (bank == 0) {
                new_bank_offset = nvm->flash_bank_size;
                old_bank_offset = 0;
                ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
                if (ret_val)
                        goto release;
        } else {
                old_bank_offset = nvm->flash_bank_size;
                new_bank_offset = 0;
                ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
                if (ret_val)
                        goto release;
        }
        for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i += 2) {
                /* Determine whether to write the value stored
                 * in the other NVM bank or a modified value stored
                 * in the shadow RAM
                 */
                ret_val = e1000_read_flash_dword_ich8lan(hw,
                                                         i + old_bank_offset,
                                                         &dword);

                if (dev_spec->shadow_ram[i].modified) {
                        dword &= 0xffff0000;
                        dword |= (dev_spec->shadow_ram[i].value & 0xffff);
                }
                if (dev_spec->shadow_ram[i + 1].modified) {
                        dword &= 0x0000ffff;
                        dword |= ((dev_spec->shadow_ram[i + 1].value & 0xffff)
                                  << 16);
                }
                if (ret_val)
                        break;

                /* If the word is 0x13, then make sure the signature bits
                 * (15:14) are 11b until the commit has completed.
                 * This will allow us to write 10b which indicates the
                 * signature is valid.  We want to do this after the write
                 * has completed so that we don't mark the segment valid
                 * while the write is still in progress
                 */
                if (i == E1000_ICH_NVM_SIG_WORD - 1)
                        dword |= E1000_ICH_NVM_SIG_MASK << 16;

                /* Convert offset to bytes. */
                act_offset = (i + new_bank_offset) << 1;

                usleep_range(100, 200);

                /* Write the data to the new bank. Offset in words */
                act_offset = i + new_bank_offset;
                ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset,
                                                                dword);
                if (ret_val)
                        break;
        }

        /* Don't bother writing the segment valid bits if sector
         * programming failed.
         */
        if (ret_val) {
                /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
                e_dbg("Flash commit failed.\n");
                goto release;
        }

        /* Finally validate the new segment by setting bit 15:14
         * to 10b in word 0x13 , this can be done without an
         * erase as well since these bits are 11 to start with
         * and we need to change bit 14 to 0b
         */
        act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;

        /*offset in words but we read dword */
        --act_offset;
        ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword);

        if (ret_val)
                goto release;

        dword &= 0xBFFFFFFF;
        ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword);

        if (ret_val)
                goto release;

        /* And invalidate the previously valid segment by setting
         * its signature word (0x13) high_byte to 0b. This can be
         * done without an erase because flash erase sets all bits
         * to 1's. We can write 1's to 0's without an erase
         */
        act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;

        /* offset in words but we read dword */
        act_offset = old_bank_offset + E1000_ICH_NVM_SIG_WORD - 1;
        ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword);

        if (ret_val)
                goto release;

        dword &= 0x00FFFFFF;
        ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword);

        if (ret_val)
                goto release;

        /* Great!  Everything worked, we can now clear the cached entries. */
        for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
                dev_spec->shadow_ram[i].modified = false;
                dev_spec->shadow_ram[i].value = 0xFFFF;
        }

release:
        nvm->ops.release(hw);

        /* Reload the EEPROM, or else modifications will not appear
         * until after the next adapter reset.
         */
        if (!ret_val) {
                nvm->ops.reload(hw);
                usleep_range(10000, 20000);
        }

out:
        if (ret_val)
                e_dbg("NVM update error: %d\n", ret_val);

        return ret_val;
}

/**
 *  e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
 *  @hw: pointer to the HW structure
 *
 *  The NVM checksum is updated by calling the generic update_nvm_checksum,
 *  which writes the checksum to the shadow ram.  The changes in the shadow
 *  ram are then committed to the EEPROM by processing each bank at a time
 *  checking for the modified bit and writing only the pending changes.
 *  After a successful commit, the shadow ram is cleared and is ready for
 *  future writes.
 **/
static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
        s32 ret_val;
        u16 data = 0;

        ret_val = e1000e_update_nvm_checksum_generic(hw);
        if (ret_val)
                goto out;

        if (nvm->type != e1000_nvm_flash_sw)
                goto out;

        nvm->ops.acquire(hw);

        /* We're writing to the opposite bank so if we're on bank 1,
         * write to bank 0 etc.  We also need to erase the segment that
         * is going to be written
         */
        ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
        if (ret_val) {
                e_dbg("Could not detect valid bank, assuming bank 0\n");
                bank = 0;
        }

        if (bank == 0) {
                new_bank_offset = nvm->flash_bank_size;
                old_bank_offset = 0;
                ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
                if (ret_val)
                        goto release;
        } else {
                old_bank_offset = nvm->flash_bank_size;
                new_bank_offset = 0;
                ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
                if (ret_val)
                        goto release;
        }
        for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
                if (dev_spec->shadow_ram[i].modified) {
                        data = dev_spec->shadow_ram[i].value;
                } else {
                        ret_val = e1000_read_flash_word_ich8lan(hw, i +
                                                                old_bank_offset,
                                                                &data);
                        if (ret_val)
                                break;
                }

                /* If the word is 0x13, then make sure the signature bits
                 * (15:14) are 11b until the commit has completed.
                 * This will allow us to write 10b which indicates the
                 * signature is valid.  We want to do this after the write
                 * has completed so that we don't mark the segment valid
                 * while the write is still in progress
                 */
                if (i == E1000_ICH_NVM_SIG_WORD)
                        data |= E1000_ICH_NVM_SIG_MASK;

                /* Convert offset to bytes. */
                act_offset = (i + new_bank_offset) << 1;

                usleep_range(100, 200);
                /* Write the bytes to the new bank. */
                ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
                                                               act_offset,
                                                               (u8)data);
                if (ret_val)
                        break;

                usleep_range(100, 200);
                ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
                                                               act_offset + 1,
                                                               (u8)(data >> 8));
                if (ret_val)
                        break;
        }

        /* Don't bother writing the segment valid bits if sector
         * programming failed.
         */
        if (ret_val) {
                /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
                e_dbg("Flash commit failed.\n");
                goto release;
        }

        /* Finally validate the new segment by setting bit 15:14
         * to 10b in word 0x13 , this can be done without an
         * erase as well since these bits are 11 to start with
         * and we need to change bit 14 to 0b
         */
        act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
        ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
        if (ret_val)
                goto release;

        data &= 0xBFFF;
        ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
                                                       act_offset * 2 + 1,
                                                       (u8)(data >> 8));
        if (ret_val)
                goto release;

        /* And invalidate the previously valid segment by setting
         * its signature word (0x13) high_byte to 0b. This can be
         * done without an erase because flash erase sets all bits
         * to 1's. We can write 1's to 0's without an erase
         */
        act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
        ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
        if (ret_val)
                goto release;

        /* Great!  Everything worked, we can now clear the cached entries. */
        for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
                dev_spec->shadow_ram[i].modified = false;
                dev_spec->shadow_ram[i].value = 0xFFFF;
        }

release:
        nvm->ops.release(hw);

        /* Reload the EEPROM, or else modifications will not appear
         * until after the next adapter reset.
         */
        if (!ret_val) {
                nvm->ops.reload(hw);
                usleep_range(10000, 20000);
        }

out:
        if (ret_val)
                e_dbg("NVM update error: %d\n", ret_val);

        return ret_val;
}

/**
 *  e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
 *  @hw: pointer to the HW structure
 *
 *  Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
 *  If the bit is 0, that the EEPROM had been modified, but the checksum was not
 *  calculated, in which case we need to calculate the checksum and set bit 6.
 **/
static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val;
        u16 data;
        u16 word;
        u16 valid_csum_mask;

        /* Read NVM and check Invalid Image CSUM bit.  If this bit is 0,
         * the checksum needs to be fixed.  This bit is an indication that
         * the NVM was prepared by OEM software and did not calculate
         * the checksum...a likely scenario.
         */
        switch (hw->mac.type) {
        case e1000_pch_lpt:
        case e1000_pch_spt:
                word = NVM_COMPAT;
                valid_csum_mask = NVM_COMPAT_VALID_CSUM;
                break;
        default:
                word = NVM_FUTURE_INIT_WORD1;
                valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM;
                break;
        }

        ret_val = e1000_read_nvm(hw, word, 1, &data);
        if (ret_val)
                return ret_val;

        if (!(data & valid_csum_mask)) {
                data |= valid_csum_mask;
                ret_val = e1000_write_nvm(hw, word, 1, &data);
                if (ret_val)
                        return ret_val;
                ret_val = e1000e_update_nvm_checksum(hw);
                if (ret_val)
                        return ret_val;
        }

        return e1000e_validate_nvm_checksum_generic(hw);
}

/**
 *  e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
 *  @hw: pointer to the HW structure
 *
 *  To prevent malicious write/erase of the NVM, set it to be read-only
 *  so that the hardware ignores all write/erase cycles of the NVM via
 *  the flash control registers.  The shadow-ram copy of the NVM will
 *  still be updated, however any updates to this copy will not stick
 *  across driver reloads.
 **/
void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        union ich8_flash_protected_range pr0;
        union ich8_hws_flash_status hsfsts;
        u32 gfpreg;

        nvm->ops.acquire(hw);

        gfpreg = er32flash(ICH_FLASH_GFPREG);

        /* Write-protect GbE Sector of NVM */
        pr0.regval = er32flash(ICH_FLASH_PR0);
        pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
        pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
        pr0.range.wpe = true;
        ew32flash(ICH_FLASH_PR0, pr0.regval);

        /* Lock down a subset of GbE Flash Control Registers, e.g.
         * PR0 to prevent the write-protection from being lifted.
         * Once FLOCKDN is set, the registers protected by it cannot
         * be written until FLOCKDN is cleared by a hardware reset.
         */
        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
        hsfsts.hsf_status.flockdn = true;
        ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);

        nvm->ops.release(hw);
}

/**
 *  e1000_write_flash_data_ich8lan - Writes bytes to the NVM
 *  @hw: pointer to the HW structure
 *  @offset: The offset (in bytes) of the byte/word to read.
 *  @size: Size of data to read, 1=byte 2=word
 *  @data: The byte(s) to write to the NVM.
 *
 *  Writes one/two bytes to the NVM using the flash access registers.
 **/
static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
                                          u8 size, u16 data)
{
        union ich8_hws_flash_status hsfsts;
        union ich8_hws_flash_ctrl hsflctl;
        u32 flash_linear_addr;
        u32 flash_data = 0;
        s32 ret_val;
        u8 count = 0;

        if (hw->mac.type == e1000_pch_spt) {
                if (size != 4 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
                        return -E1000_ERR_NVM;
        } else {
                if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
                        return -E1000_ERR_NVM;
        }

        flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
                             hw->nvm.flash_base_addr);

        do {
                udelay(1);
                /* Steps */
                ret_val = e1000_flash_cycle_init_ich8lan(hw);
                if (ret_val)
                        break;
                /* In SPT, This register is in Lan memory space, not
                 * flash.  Therefore, only 32 bit access is supported
                 */
                if (hw->mac.type == e1000_pch_spt)
                        hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16;
                else
                        hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);

                /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
                hsflctl.hsf_ctrl.fldbcount = size - 1;
                hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
                /* In SPT, This register is in Lan memory space,
                 * not flash.  Therefore, only 32 bit access is
                 * supported
                 */
                if (hw->mac.type == e1000_pch_spt)
                        ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16);
                else
                        ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);

                ew32flash(ICH_FLASH_FADDR, flash_linear_addr);

                if (size == 1)
                        flash_data = (u32)data & 0x00FF;
                else
                        flash_data = (u32)data;

                ew32flash(ICH_FLASH_FDATA0, flash_data);

                /* check if FCERR is set to 1 , if set to 1, clear it
                 * and try the whole sequence a few more times else done
                 */
                ret_val =
                    e1000_flash_cycle_ich8lan(hw,
                                              ICH_FLASH_WRITE_COMMAND_TIMEOUT);
                if (!ret_val)
                        break;

                /* If we're here, then things are most likely
                 * completely hosed, but if the error condition
                 * is detected, it won't hurt to give it another
                 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
                 */
                hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
                if (hsfsts.hsf_status.flcerr)
                        /* Repeat for some time before giving up. */
                        continue;
                if (!hsfsts.hsf_status.flcdone) {
                        e_dbg("Timeout error - flash cycle did not complete.\n");
                        break;
                }
        } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);

        return ret_val;
}

/**
*  e1000_write_flash_data32_ich8lan - Writes 4 bytes to the NVM
*  @hw: pointer to the HW structure
*  @offset: The offset (in bytes) of the dwords to read.
*  @data: The 4 bytes to write to the NVM.
*
*  Writes one/two/four bytes to the NVM using the flash access registers.
**/
static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
                                            u32 data)
{
        union ich8_hws_flash_status hsfsts;
        union ich8_hws_flash_ctrl hsflctl;
        u32 flash_linear_addr;
        s32 ret_val;
        u8 count = 0;

        if (hw->mac.type == e1000_pch_spt) {
                if (offset > ICH_FLASH_LINEAR_ADDR_MASK)
                        return -E1000_ERR_NVM;
        }
        flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
                             hw->nvm.flash_base_addr);
        do {
                udelay(1);
                /* Steps */
                ret_val = e1000_flash_cycle_init_ich8lan(hw);
                if (ret_val)
                        break;

                /* In SPT, This register is in Lan memory space, not
                 * flash.  Therefore, only 32 bit access is supported
                 */
                if (hw->mac.type == e1000_pch_spt)
                        hsflctl.regval = er32flash(ICH_FLASH_HSFSTS)
                            >> 16;
                else
                        hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);

                hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1;
                hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;

                /* In SPT, This register is in Lan memory space,
                 * not flash.  Therefore, only 32 bit access is
                 * supported
                 */
                if (hw->mac.type == e1000_pch_spt)
                        ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16);
                else
                        ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);

                ew32flash(ICH_FLASH_FADDR, flash_linear_addr);

                ew32flash(ICH_FLASH_FDATA0, data);

                /* check if FCERR is set to 1 , if set to 1, clear it
                 * and try the whole sequence a few more times else done
                 */
                ret_val =
                   e1000_flash_cycle_ich8lan(hw,
                                             ICH_FLASH_WRITE_COMMAND_TIMEOUT);

                if (!ret_val)
                        break;

                /* If we're here, then things are most likely
                 * completely hosed, but if the error condition
                 * is detected, it won't hurt to give it another
                 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
                 */
                hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);

                if (hsfsts.hsf_status.flcerr)
                        /* Repeat for some time before giving up. */
                        continue;
                if (!hsfsts.hsf_status.flcdone) {
                        e_dbg("Timeout error - flash cycle did not complete.\n");
                        break;
                }
        } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);

        return ret_val;
}

/**
 *  e1000_write_flash_byte_ich8lan - Write a single byte to NVM
 *  @hw: pointer to the HW structure
 *  @offset: The index of the byte to read.
 *  @data: The byte to write to the NVM.
 *
 *  Writes a single byte to the NVM using the flash access registers.
 **/
static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
                                          u8 data)
{
        u16 word = (u16)data;

        return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
}

/**
*  e1000_retry_write_flash_dword_ich8lan - Writes a dword to NVM
*  @hw: pointer to the HW structure
*  @offset: The offset of the word to write.
*  @dword: The dword to write to the NVM.
*
*  Writes a single dword to the NVM using the flash access registers.
*  Goes through a retry algorithm before giving up.
**/
static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw,
                                                 u32 offset, u32 dword)
{
        s32 ret_val;
        u16 program_retries;

        /* Must convert word offset into bytes. */
        offset <<= 1;
        ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword);

        if (!ret_val)
                return ret_val;
        for (program_retries = 0; program_retries < 100; program_retries++) {
                e_dbg("Retrying Byte %8.8X at offset %u\n", dword, offset);
                usleep_range(100, 200);
                ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword);
                if (!ret_val)
                        break;
        }
        if (program_retries == 100)
                return -E1000_ERR_NVM;

        return 0;
}

/**
 *  e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
 *  @hw: pointer to the HW structure
 *  @offset: The offset of the byte to write.
 *  @byte: The byte to write to the NVM.
 *
 *  Writes a single byte to the NVM using the flash access registers.
 *  Goes through a retry algorithm before giving up.
 **/
static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
                                                u32 offset, u8 byte)
{
        s32 ret_val;
        u16 program_retries;

        ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
        if (!ret_val)
                return ret_val;

        for (program_retries = 0; program_retries < 100; program_retries++) {
                e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
                usleep_range(100, 200);
                ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
                if (!ret_val)
                        break;
        }
        if (program_retries == 100)
                return -E1000_ERR_NVM;

        return 0;
}

/**
 *  e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
 *  @hw: pointer to the HW structure
 *  @bank: 0 for first bank, 1 for second bank, etc.
 *
 *  Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
 *  bank N is 4096 * N + flash_reg_addr.
 **/
static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
{
        struct e1000_nvm_info *nvm = &hw->nvm;
        union ich8_hws_flash_status hsfsts;
        union ich8_hws_flash_ctrl hsflctl;
        u32 flash_linear_addr;
        /* bank size is in 16bit words - adjust to bytes */
        u32 flash_bank_size = nvm->flash_bank_size * 2;
        s32 ret_val;
        s32 count = 0;
        s32 j, iteration, sector_size;

        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);

        /* Determine HW Sector size: Read BERASE bits of hw flash status
         * register
         * 00: The Hw sector is 256 bytes, hence we need to erase 16
         *     consecutive sectors.  The start index for the nth Hw sector
         *     can be calculated as = bank * 4096 + n * 256
         * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
         *     The start index for the nth Hw sector can be calculated
         *     as = bank * 4096
         * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
         *     (ich9 only, otherwise error condition)
         * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
         */
        switch (hsfsts.hsf_status.berasesz) {
        case 0:
                /* Hw sector size 256 */
                sector_size = ICH_FLASH_SEG_SIZE_256;
                iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
                break;
        case 1:
                sector_size = ICH_FLASH_SEG_SIZE_4K;
                iteration = 1;
                break;
        case 2:
                sector_size = ICH_FLASH_SEG_SIZE_8K;
                iteration = 1;
                break;
        case 3:
                sector_size = ICH_FLASH_SEG_SIZE_64K;
                iteration = 1;
                break;
        default:
                return -E1000_ERR_NVM;
        }

        /* Start with the base address, then add the sector offset. */
        flash_linear_addr = hw->nvm.flash_base_addr;
        flash_linear_addr += (bank) ? flash_bank_size : 0;

        for (j = 0; j < iteration; j++) {
                do {
                        u32 timeout = ICH_FLASH_ERASE_COMMAND_TIMEOUT;

                        /* Steps */
                        ret_val = e1000_flash_cycle_init_ich8lan(hw);
                        if (ret_val)
                                return ret_val;

                        /* Write a value 11 (block Erase) in Flash
                         * Cycle field in hw flash control
                         */
                        if (hw->mac.type == e1000_pch_spt)
                                hsflctl.regval =
                                    er32flash(ICH_FLASH_HSFSTS) >> 16;
                        else
                                hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);

                        hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
                        if (hw->mac.type == e1000_pch_spt)
                                ew32flash(ICH_FLASH_HSFSTS,
                                          hsflctl.regval << 16);
                        else
                                ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);

                        /* Write the last 24 bits of an index within the
                         * block into Flash Linear address field in Flash
                         * Address.
                         */
                        flash_linear_addr += (j * sector_size);
                        ew32flash(ICH_FLASH_FADDR, flash_linear_addr);

                        ret_val = e1000_flash_cycle_ich8lan(hw, timeout);
                        if (!ret_val)
                                break;

                        /* Check if FCERR is set to 1.  If 1,
                         * clear it and try the whole sequence
                         * a few more times else Done
                         */
                        hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
                        if (hsfsts.hsf_status.flcerr)
                                /* repeat for some time before giving up */
                                continue;
                        else if (!hsfsts.hsf_status.flcdone)
                                return ret_val;
                } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
        }

        return 0;
}

/**
 *  e1000_valid_led_default_ich8lan - Set the default LED settings
 *  @hw: pointer to the HW structure
 *  @data: Pointer to the LED settings
 *
 *  Reads the LED default settings from the NVM to data.  If the NVM LED
 *  settings is all 0's or F's, set the LED default to a valid LED default
 *  setting.
 **/
static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
{
        s32 ret_val;

        ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
        if (ret_val) {
                e_dbg("NVM Read Error\n");
                return ret_val;
        }

        if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
                *data = ID_LED_DEFAULT_ICH8LAN;

        return 0;
}

/**
 *  e1000_id_led_init_pchlan - store LED configurations
 *  @hw: pointer to the HW structure
 *
 *  PCH does not control LEDs via the LEDCTL register, rather it uses
 *  the PHY LED configuration register.
 *
 *  PCH also does not have an "always on" or "always off" mode which
 *  complicates the ID feature.  Instead of using the "on" mode to indicate
 *  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()),
 *  use "link_up" mode.  The LEDs will still ID on request if there is no
 *  link based on logic in e1000_led_[on|off]_pchlan().
 **/
static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
{
        struct e1000_mac_info *mac = &hw->mac;
        s32 ret_val;
        const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
        const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
        u16 data, i, temp, shift;

        /* Get default ID LED modes */
        ret_val = hw->nvm.ops.valid_led_default(hw, &data);
        if (ret_val)
                return ret_val;

        mac->ledctl_default = er32(LEDCTL);
        mac->ledctl_mode1 = mac->ledctl_default;
        mac->ledctl_mode2 = mac->ledctl_default;

        for (i = 0; i < 4; i++) {
                temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
                shift = (i * 5);
                switch (temp) {
                case ID_LED_ON1_DEF2:
                case ID_LED_ON1_ON2:
                case ID_LED_ON1_OFF2:
                        mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
                        mac->ledctl_mode1 |= (ledctl_on << shift);
                        break;
                case ID_LED_OFF1_DEF2:
                case ID_LED_OFF1_ON2:
                case ID_LED_OFF1_OFF2:
                        mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
                        mac->ledctl_mode1 |= (ledctl_off << shift);
                        break;
                default:
                        /* Do nothing */
                        break;
                }
                switch (temp) {
                case ID_LED_DEF1_ON2:
                case ID_LED_ON1_ON2:
                case ID_LED_OFF1_ON2:
                        mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
                        mac->ledctl_mode2 |= (ledctl_on << shift);
                        break;
                case ID_LED_DEF1_OFF2:
                case ID_LED_ON1_OFF2:
                case ID_LED_OFF1_OFF2:
                        mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
                        mac->ledctl_mode2 |= (ledctl_off << shift);
                        break;
                default:
                        /* Do nothing */
                        break;
                }
        }

        return 0;
}

/**
 *  e1000_get_bus_info_ich8lan - Get/Set the bus type and width
 *  @hw: pointer to the HW structure
 *
 *  ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
 *  register, so the the bus width is hard coded.
 **/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
        struct e1000_bus_info *bus = &hw->bus;
        s32 ret_val;

        ret_val = e1000e_get_bus_info_pcie(hw);

        /* ICH devices are "PCI Express"-ish.  They have
         * a configuration space, but do not contain
         * PCI Express Capability registers, so bus width
         * must be hardcoded.
         */
        if (bus->width == e1000_bus_width_unknown)
                bus->width = e1000_bus_width_pcie_x1;

        return ret_val;
}

/**
 *  e1000_reset_hw_ich8lan - Reset the hardware
 *  @hw: pointer to the HW structure
 *
 *  Does a full reset of the hardware which includes a reset of the PHY and
 *  MAC.
 **/
static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u16 kum_cfg;
        u32 ctrl, reg;
        s32 ret_val;

        /* Prevent the PCI-E bus from sticking if there is no TLP connection
         * on the last TLP read/write transaction when MAC is reset.
         */
        ret_val = e1000e_disable_pcie_master(hw);
        if (ret_val)
                e_dbg("PCI-E Master disable polling has failed.\n");

        e_dbg("Masking off all interrupts\n");
        ew32(IMC, 0xffffffff);

        /* Disable the Transmit and Receive units.  Then delay to allow
         * any pending transactions to complete before we hit the MAC
         * with the global reset.
         */
        ew32(RCTL, 0);
        ew32(TCTL, E1000_TCTL_PSP);
        e1e_flush();

        usleep_range(10000, 20000);

        /* Workaround for ICH8 bit corruption issue in FIFO memory */
        if (hw->mac.type == e1000_ich8lan) {
                /* Set Tx and Rx buffer allocation to 8k apiece. */
                ew32(PBA, E1000_PBA_8K);
                /* Set Packet Buffer Size to 16k. */
                ew32(PBS, E1000_PBS_16K);
        }

        if (hw->mac.type == e1000_pchlan) {
                /* Save the NVM K1 bit setting */
                ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &kum_cfg);
                if (ret_val)
                        return ret_val;

                if (kum_cfg & E1000_NVM_K1_ENABLE)
                        dev_spec->nvm_k1_enabled = true;
                else
                        dev_spec->nvm_k1_enabled = false;
        }

        ctrl = er32(CTRL);

        if (!hw->phy.ops.check_reset_block(hw)) {
                /* Full-chip reset requires MAC and PHY reset at the same
                 * time to make sure the interface between MAC and the
                 * external PHY is reset.
                 */
                ctrl |= E1000_CTRL_PHY_RST;

                /* Gate automatic PHY configuration by hardware on
                 * non-managed 82579
                 */
                if ((hw->mac.type == e1000_pch2lan) &&
                    !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
                        e1000_gate_hw_phy_config_ich8lan(hw, true);
        }
        ret_val = e1000_acquire_swflag_ich8lan(hw);
        e_dbg("Issuing a global reset to ich8lan\n");
        ew32(CTRL, (ctrl | E1000_CTRL_RST));
        /* cannot issue a flush here because it hangs the hardware */
        msleep(20);

        /* Set Phy Config Counter to 50msec */
        if (hw->mac.type == e1000_pch2lan) {
                reg = er32(FEXTNVM3);
                reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
                reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
                ew32(FEXTNVM3, reg);
        }

        if (!ret_val)
                clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);

        if (ctrl & E1000_CTRL_PHY_RST) {
                ret_val = hw->phy.ops.get_cfg_done(hw);
                if (ret_val)
                        return ret_val;

                ret_val = e1000_post_phy_reset_ich8lan(hw);
                if (ret_val)
                        return ret_val;
        }

        /* For PCH, this write will make sure that any noise
         * will be detected as a CRC error and be dropped rather than show up
         * as a bad packet to the DMA engine.
         */
        if (hw->mac.type == e1000_pchlan)
                ew32(CRC_OFFSET, 0x65656565);

        ew32(IMC, 0xffffffff);
        er32(ICR);

        reg = er32(KABGTXD);
        reg |= E1000_KABGTXD_BGSQLBIAS;
        ew32(KABGTXD, reg);

        return 0;
}

/**
 *  e1000_init_hw_ich8lan - Initialize the hardware
 *  @hw: pointer to the HW structure
 *
 *  Prepares the hardware for transmit and receive by doing the following:
 *   - initialize hardware bits
 *   - initialize LED identification
 *   - setup receive address registers
 *   - setup flow control
 *   - setup transmit descriptors
 *   - clear statistics
 **/
static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
{
        struct e1000_mac_info *mac = &hw->mac;
        u32 ctrl_ext, txdctl, snoop;
        s32 ret_val;
        u16 i;

        e1000_initialize_hw_bits_ich8lan(hw);

        /* Initialize identification LED */
        ret_val = mac->ops.id_led_init(hw);
        /* An error is not fatal and we should not stop init due to this */
        if (ret_val)
                e_dbg("Error initializing identification LED\n");

        /* Setup the receive address. */
        e1000e_init_rx_addrs(hw, mac->rar_entry_count);

        /* Zero out the Multicast HASH table */
        e_dbg("Zeroing the MTA\n");
        for (i = 0; i < mac->mta_reg_count; i++)
                E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);

        /* The 82578 Rx buffer will stall if wakeup is enabled in host and
         * the ME.  Disable wakeup by clearing the host wakeup bit.
         * Reset the phy after disabling host wakeup to reset the Rx buffer.
         */
        if (hw->phy.type == e1000_phy_82578) {
                e1e_rphy(hw, BM_PORT_GEN_CFG, &i);
                i &= ~BM_WUC_HOST_WU_BIT;
                e1e_wphy(hw, BM_PORT_GEN_CFG, i);
                ret_val = e1000_phy_hw_reset_ich8lan(hw);
                if (ret_val)
                        return ret_val;
        }

        /* Setup link and flow control */
        ret_val = mac->ops.setup_link(hw);

        /* Set the transmit descriptor write-back policy for both queues */
        txdctl = er32(TXDCTL(0));
        txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) |
                  E1000_TXDCTL_FULL_TX_DESC_WB);
        txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) |
                  E1000_TXDCTL_MAX_TX_DESC_PREFETCH);
        ew32(TXDCTL(0), txdctl);
        txdctl = er32(TXDCTL(1));
        txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) |
                  E1000_TXDCTL_FULL_TX_DESC_WB);
        txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) |
                  E1000_TXDCTL_MAX_TX_DESC_PREFETCH);
        ew32(TXDCTL(1), txdctl);

        /* ICH8 has opposite polarity of no_snoop bits.
         * By default, we should use snoop behavior.
         */
        if (mac->type == e1000_ich8lan)
                snoop = PCIE_ICH8_SNOOP_ALL;
        else
                snoop = (u32)~(PCIE_NO_SNOOP_ALL);
        e1000e_set_pcie_no_snoop(hw, snoop);

        ctrl_ext = er32(CTRL_EXT);
        ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
        ew32(CTRL_EXT, ctrl_ext);

        /* Clear all of the statistics registers (clear on read).  It is
         * important that we do this after we have tried to establish link
         * because the symbol error count will increment wildly if there
         * is no link.
         */
        e1000_clear_hw_cntrs_ich8lan(hw);

        return ret_val;
}

/**
 *  e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
 *  @hw: pointer to the HW structure
 *
 *  Sets/Clears required hardware bits necessary for correctly setting up the
 *  hardware for transmit and receive.
 **/
static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
{
        u32 reg;

        /* Extended Device Control */
        reg = er32(CTRL_EXT);
        reg |= BIT(22);
        /* Enable PHY low-power state when MAC is at D3 w/o WoL */
        if (hw->mac.type >= e1000_pchlan)
                reg |= E1000_CTRL_EXT_PHYPDEN;
        ew32(CTRL_EXT, reg);

        /* Transmit Descriptor Control 0 */
        reg = er32(TXDCTL(0));
        reg |= BIT(22);
        ew32(TXDCTL(0), reg);

        /* Transmit Descriptor Control 1 */
        reg = er32(TXDCTL(1));
        reg |= BIT(22);
        ew32(TXDCTL(1), reg);

        /* Transmit Arbitration Control 0 */
        reg = er32(TARC(0));
        if (hw->mac.type == e1000_ich8lan)
                reg |= BIT(28) | BIT(29);
        reg |= BIT(23) | BIT(24) | BIT(26) | BIT(27);
        ew32(TARC(0), reg);

        /* Transmit Arbitration Control 1 */
        reg = er32(TARC(1));
        if (er32(TCTL) & E1000_TCTL_MULR)
                reg &= ~BIT(28);
        else
                reg |= BIT(28);
        reg |= BIT(24) | BIT(26) | BIT(30);
        ew32(TARC(1), reg);

        /* Device Status */
        if (hw->mac.type == e1000_ich8lan) {
                reg = er32(STATUS);
                reg &= ~BIT(31);
                ew32(STATUS, reg);
        }

        /* work-around descriptor data corruption issue during nfs v2 udp
         * traffic, just disable the nfs filtering capability
         */
        reg = er32(RFCTL);
        reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);

        /* Disable IPv6 extension header parsing because some malformed
         * IPv6 headers can hang the Rx.
         */
        if (hw->mac.type == e1000_ich8lan)
                reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
        ew32(RFCTL, reg);

        /* Enable ECC on Lynxpoint */
        if ((hw->mac.type == e1000_pch_lpt) ||
            (hw->mac.type == e1000_pch_spt)) {
                reg = er32(PBECCSTS);
                reg |= E1000_PBECCSTS_ECC_ENABLE;
                ew32(PBECCSTS, reg);

                reg = er32(CTRL);
                reg |= E1000_CTRL_MEHE;
                ew32(CTRL, reg);
        }
}

/**
 *  e1000_setup_link_ich8lan - Setup flow control and link settings
 *  @hw: pointer to the HW structure
 *
 *  Determines which flow control settings to use, then configures flow
 *  control.  Calls the appropriate media-specific link configuration
 *  function.  Assuming the adapter has a valid link partner, a valid link
 *  should be established.  Assumes the hardware has previously been reset
 *  and the transmitter and receiver are not enabled.
 **/
static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val;

        if (hw->phy.ops.check_reset_block(hw))
                return 0;

        /* ICH parts do not have a word in the NVM to determine
         * the default flow control setting, so we explicitly
         * set it to full.
         */
        if (hw->fc.requested_mode == e1000_fc_default) {
                /* Workaround h/w hang when Tx flow control enabled */
                if (hw->mac.type == e1000_pchlan)
                        hw->fc.requested_mode = e1000_fc_rx_pause;
                else
                        hw->fc.requested_mode = e1000_fc_full;
        }

        /* Save off the requested flow control mode for use later.  Depending
         * on the link partner's capabilities, we may or may not use this mode.
         */
        hw->fc.current_mode = hw->fc.requested_mode;

        e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);

        /* Continue to configure the copper link. */
        ret_val = hw->mac.ops.setup_physical_interface(hw);
        if (ret_val)
                return ret_val;

        ew32(FCTTV, hw->fc.pause_time);
        if ((hw->phy.type == e1000_phy_82578) ||
            (hw->phy.type == e1000_phy_82579) ||
            (hw->phy.type == e1000_phy_i217) ||
            (hw->phy.type == e1000_phy_82577)) {
                ew32(FCRTV_PCH, hw->fc.refresh_time);

                ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
                                   hw->fc.pause_time);
                if (ret_val)
                        return ret_val;
        }

        return e1000e_set_fc_watermarks(hw);
}

/**
 *  e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface
 *  @hw: pointer to the HW structure
 *
 *  Configures the kumeran interface to the PHY to wait the appropriate time
 *  when polling the PHY, then call the generic setup_copper_link to finish
 *  configuring the copper link.
 **/
static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
{
        u32 ctrl;
        s32 ret_val;
        u16 reg_data;

        ctrl = er32(CTRL);
        ctrl |= E1000_CTRL_SLU;
        ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
        ew32(CTRL, ctrl);

        /* Set the mac to wait the maximum time between each iteration
         * and increase the max iterations when polling the phy;
         * this fixes erroneous timeouts at 10Mbps.
         */
        ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF);
        if (ret_val)
                return ret_val;
        ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
                                       &reg_data);
        if (ret_val)
                return ret_val;
        reg_data |= 0x3F;
        ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
                                        reg_data);
        if (ret_val)
                return ret_val;

        switch (hw->phy.type) {
        case e1000_phy_igp_3:
                ret_val = e1000e_copper_link_setup_igp(hw);
                if (ret_val)
                        return ret_val;
                break;
        case e1000_phy_bm:
        case e1000_phy_82578:
                ret_val = e1000e_copper_link_setup_m88(hw);
                if (ret_val)
                        return ret_val;
                break;
        case e1000_phy_82577:
        case e1000_phy_82579:
                ret_val = e1000_copper_link_setup_82577(hw);
                if (ret_val)
                        return ret_val;
                break;
        case e1000_phy_ife:
                ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
                if (ret_val)
                        return ret_val;

                reg_data &= ~IFE_PMC_AUTO_MDIX;

                switch (hw->phy.mdix) {
                case 1:
                        reg_data &= ~IFE_PMC_FORCE_MDIX;
                        break;
                case 2:
                        reg_data |= IFE_PMC_FORCE_MDIX;
                        break;
                case 0:
                default:
                        reg_data |= IFE_PMC_AUTO_MDIX;
                        break;
                }
                ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
                if (ret_val)
                        return ret_val;
                break;
        default:
                break;
        }

        return e1000e_setup_copper_link(hw);
}

/**
 *  e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface
 *  @hw: pointer to the HW structure
 *
 *  Calls the PHY specific link setup function and then calls the
 *  generic setup_copper_link to finish configuring the link for
 *  Lynxpoint PCH devices
 **/
static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw)
{
        u32 ctrl;
        s32 ret_val;

        ctrl = er32(CTRL);
        ctrl |= E1000_CTRL_SLU;
        ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
        ew32(CTRL, ctrl);

        ret_val = e1000_copper_link_setup_82577(hw);
        if (ret_val)
                return ret_val;

        return e1000e_setup_copper_link(hw);
}

/**
 *  e1000_get_link_up_info_ich8lan - Get current link speed and duplex
 *  @hw: pointer to the HW structure
 *  @speed: pointer to store current link speed
 *  @duplex: pointer to store the current link duplex
 *
 *  Calls the generic get_speed_and_duplex to retrieve the current link
 *  information and then calls the Kumeran lock loss workaround for links at
 *  gigabit speeds.
 **/
static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
                                          u16 *duplex)
{
        s32 ret_val;

        ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
        if (ret_val)
                return ret_val;

        if ((hw->mac.type == e1000_ich8lan) &&
            (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
                ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
        }

        return ret_val;
}

/**
 *  e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround
 *  @hw: pointer to the HW structure
 *
 *  Work-around for 82566 Kumeran PCS lock loss:
 *  On link status change (i.e. PCI reset, speed change) and link is up and
 *  speed is gigabit-
 *    0) if workaround is optionally disabled do nothing
 *    1) wait 1ms for Kumeran link to come up
 *    2) check Kumeran Diagnostic register PCS lock loss bit
 *    3) if not set the link is locked (all is good), otherwise...
 *    4) reset the PHY
 *    5) repeat up to 10 times
 *  Note: this is only called for IGP3 copper when speed is 1gb.
 **/
static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
{
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 phy_ctrl;
        s32 ret_val;
        u16 i, data;
        bool link;

        if (!dev_spec->kmrn_lock_loss_workaround_enabled)
                return 0;

        /* Make sure link is up before proceeding.  If not just return.
         * Attempting this while link is negotiating fouled up link
         * stability
         */
        ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
        if (!link)
                return 0;

        for (i = 0; i < 10; i++) {
                /* read once to clear */
                ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
                if (ret_val)
                        return ret_val;
                /* and again to get new status */
                ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
                if (ret_val)
                        return ret_val;

                /* check for PCS lock */
                if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
                        return 0;

                /* Issue PHY reset */
                e1000_phy_hw_reset(hw);
                mdelay(5);
        }
        /* Disable GigE link negotiation */
        phy_ctrl = er32(PHY_CTRL);
        phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE |
                     E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
        ew32(PHY_CTRL, phy_ctrl);

        /* Call gig speed drop workaround on Gig disable before accessing
         * any PHY registers
         */
        e1000e_gig_downshift_workaround_ich8lan(hw);

        /* unable to acquire PCS lock */
        return -E1000_ERR_PHY;
}

/**
 *  e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
 *  @hw: pointer to the HW structure
 *  @state: boolean value used to set the current Kumeran workaround state
 *
 *  If ICH8, set the current Kumeran workaround state (enabled - true
 *  /disabled - false).
 **/
void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
                                                  bool state)
{
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;

        if (hw->mac.type != e1000_ich8lan) {
                e_dbg("Workaround applies to ICH8 only.\n");
                return;
        }

        dev_spec->kmrn_lock_loss_workaround_enabled = state;
}

/**
 *  e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3
 *  @hw: pointer to the HW structure
 *
 *  Workaround for 82566 power-down on D3 entry:
 *    1) disable gigabit link
 *    2) write VR power-down enable
 *    3) read it back
 *  Continue if successful, else issue LCD reset and repeat
 **/
void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
{
        u32 reg;
        u16 data;
        u8 retry = 0;

        if (hw->phy.type != e1000_phy_igp_3)
                return;

        /* Try the workaround twice (if needed) */
        do {
                /* Disable link */
                reg = er32(PHY_CTRL);
                reg |= (E1000_PHY_CTRL_GBE_DISABLE |
                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
                ew32(PHY_CTRL, reg);

                /* Call gig speed drop workaround on Gig disable before
                 * accessing any PHY registers
                 */
                if (hw->mac.type == e1000_ich8lan)
                        e1000e_gig_downshift_workaround_ich8lan(hw);

                /* Write VR power-down enable */
                e1e_rphy(hw, IGP3_VR_CTRL, &data);
                data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
                e1e_wphy(hw, IGP3_VR_CTRL, data | IGP3_VR_CTRL_MODE_SHUTDOWN);

                /* Read it back and test */
                e1e_rphy(hw, IGP3_VR_CTRL, &data);
                data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
                if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry)
                        break;

                /* Issue PHY reset and repeat at most one more time */
                reg = er32(CTRL);
                ew32(CTRL, reg | E1000_CTRL_PHY_RST);
                retry++;
        } while (retry);
}

/**
 *  e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
 *  @hw: pointer to the HW structure
 *
 *  Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
 *  LPLU, Gig disable, MDIC PHY reset):
 *    1) Set Kumeran Near-end loopback
 *    2) Clear Kumeran Near-end loopback
 *  Should only be called for ICH8[m] devices with any 1G Phy.
 **/
void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val;
        u16 reg_data;

        if ((hw->mac.type != e1000_ich8lan) || (hw->phy.type == e1000_phy_ife))
                return;

        ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
                                       &reg_data);
        if (ret_val)
                return;
        reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
        ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
                                        reg_data);
        if (ret_val)
                return;
        reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
        e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data);
}

/**
 *  e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
 *  @hw: pointer to the HW structure
 *
 *  During S0 to Sx transition, it is possible the link remains at gig
 *  instead of negotiating to a lower speed.  Before going to Sx, set
 *  'Gig Disable' to force link speed negotiation to a lower speed based on
 *  the LPLU setting in the NVM or custom setting.  For PCH and newer parts,
 *  the OEM bits PHY register (LED, GbE disable and LPLU configurations) also
 *  needs to be written.
 *  Parts that support (and are linked to a partner which support) EEE in
 *  100Mbps should disable LPLU since 100Mbps w/ EEE requires less power
 *  than 10Mbps w/o EEE.
 **/
void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
{
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
        u32 phy_ctrl;
        s32 ret_val;

        phy_ctrl = er32(PHY_CTRL);
        phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;

        if (hw->phy.type == e1000_phy_i217) {
                u16 phy_reg, device_id = hw->adapter->pdev->device;

                if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
                    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
                    (device_id == E1000_DEV_ID_PCH_I218_LM3) ||
                    (device_id == E1000_DEV_ID_PCH_I218_V3) ||
                    (hw->mac.type == e1000_pch_spt)) {
                        u32 fextnvm6 = er32(FEXTNVM6);

                        ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
                }

                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        goto out;

                if (!dev_spec->eee_disable) {
                        u16 eee_advert;

                        ret_val =
                            e1000_read_emi_reg_locked(hw,
                                                      I217_EEE_ADVERTISEMENT,
                                                      &eee_advert);
                        if (ret_val)
                                goto release;

                        /* Disable LPLU if both link partners support 100BaseT
                         * EEE and 100Full is advertised on both ends of the
                         * link, and enable Auto Enable LPI since there will
                         * be no driver to enable LPI while in Sx.
                         */
                        if ((eee_advert & I82579_EEE_100_SUPPORTED) &&
                            (dev_spec->eee_lp_ability &
                             I82579_EEE_100_SUPPORTED) &&
                            (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) {
                                phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU |
                                              E1000_PHY_CTRL_NOND0A_LPLU);

                                /* Set Auto Enable LPI after link up */
                                e1e_rphy_locked(hw,
                                                I217_LPI_GPIO_CTRL, &phy_reg);
                                phy_reg |= I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
                                e1e_wphy_locked(hw,
                                                I217_LPI_GPIO_CTRL, phy_reg);
                        }
                }

                /* For i217 Intel Rapid Start Technology support,
                 * when the system is going into Sx and no manageability engine
                 * is present, the driver must configure proxy to reset only on
                 * power good.  LPI (Low Power Idle) state must also reset only
                 * on power good, as well as the MTA (Multicast table array).
                 * The SMBus release must also be disabled on LCD reset.
                 */
                if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
                        /* Enable proxy to reset only on power good. */
                        e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg);
                        phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE;
                        e1e_wphy_locked(hw, I217_PROXY_CTRL, phy_reg);

                        /* Set bit enable LPI (EEE) to reset only on
                         * power good.
                         */
                        e1e_rphy_locked(hw, I217_SxCTRL, &phy_reg);
                        phy_reg |= I217_SxCTRL_ENABLE_LPI_RESET;
                        e1e_wphy_locked(hw, I217_SxCTRL, phy_reg);

                        /* Disable the SMB release on LCD reset. */
                        e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg);
                        phy_reg &= ~I217_MEMPWR_DISABLE_SMB_RELEASE;
                        e1e_wphy_locked(hw, I217_MEMPWR, phy_reg);
                }

                /* Enable MTA to reset for Intel Rapid Start Technology
                 * Support
                 */
                e1e_rphy_locked(hw, I217_CGFREG, &phy_reg);
                phy_reg |= I217_CGFREG_ENABLE_MTA_RESET;
                e1e_wphy_locked(hw, I217_CGFREG, phy_reg);

release:
                hw->phy.ops.release(hw);
        }
out:
        ew32(PHY_CTRL, phy_ctrl);

        if (hw->mac.type == e1000_ich8lan)
                e1000e_gig_downshift_workaround_ich8lan(hw);

        if (hw->mac.type >= e1000_pchlan) {
                e1000_oem_bits_config_ich8lan(hw, false);

                /* Reset PHY to activate OEM bits on 82577/8 */
                if (hw->mac.type == e1000_pchlan)
                        e1000e_phy_hw_reset_generic(hw);

                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return;
                e1000_write_smbus_addr(hw);
                hw->phy.ops.release(hw);
        }
}

/**
 *  e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
 *  @hw: pointer to the HW structure
 *
 *  During Sx to S0 transitions on non-managed devices or managed devices
 *  on which PHY resets are not blocked, if the PHY registers cannot be
 *  accessed properly by the s/w toggle the LANPHYPC value to power cycle
 *  the PHY.
 *  On i217, setup Intel Rapid Start Technology.
 **/
void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
{
        s32 ret_val;

        if (hw->mac.type < e1000_pch2lan)
                return;

        ret_val = e1000_init_phy_workarounds_pchlan(hw);
        if (ret_val) {
                e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val);
                return;
        }

        /* For i217 Intel Rapid Start Technology support when the system
         * is transitioning from Sx and no manageability engine is present
         * configure SMBus to restore on reset, disable proxy, and enable
         * the reset on MTA (Multicast table array).
         */
        if (hw->phy.type == e1000_phy_i217) {
                u16 phy_reg;

                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val) {
                        e_dbg("Failed to setup iRST\n");
                        return;
                }

                /* Clear Auto Enable LPI after link up */
                e1e_rphy_locked(hw, I217_LPI_GPIO_CTRL, &phy_reg);
                phy_reg &= ~I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
                e1e_wphy_locked(hw, I217_LPI_GPIO_CTRL, phy_reg);

                if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
                        /* Restore clear on SMB if no manageability engine
                         * is present
                         */
                        ret_val = e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg);
                        if (ret_val)
                                goto release;
                        phy_reg |= I217_MEMPWR_DISABLE_SMB_RELEASE;
                        e1e_wphy_locked(hw, I217_MEMPWR, phy_reg);

                        /* Disable Proxy */
                        e1e_wphy_locked(hw, I217_PROXY_CTRL, 0);
                }
                /* Enable reset on MTA */
                ret_val = e1e_rphy_locked(hw, I217_CGFREG, &phy_reg);
                if (ret_val)
                        goto release;
                phy_reg &= ~I217_CGFREG_ENABLE_MTA_RESET;
                e1e_wphy_locked(hw, I217_CGFREG, phy_reg);
release:
                if (ret_val)
                        e_dbg("Error %d in resume workarounds\n", ret_val);
                hw->phy.ops.release(hw);
        }
}

/**
 *  e1000_cleanup_led_ich8lan - Restore the default LED operation
 *  @hw: pointer to the HW structure
 *
 *  Return the LED back to the default configuration.
 **/
static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
{
        if (hw->phy.type == e1000_phy_ife)
                return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);

        ew32(LEDCTL, hw->mac.ledctl_default);
        return 0;
}

/**
 *  e1000_led_on_ich8lan - Turn LEDs on
 *  @hw: pointer to the HW structure
 *
 *  Turn on the LEDs.
 **/
static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
{
        if (hw->phy.type == e1000_phy_ife)
                return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
                                (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));

        ew32(LEDCTL, hw->mac.ledctl_mode2);
        return 0;
}

/**
 *  e1000_led_off_ich8lan - Turn LEDs off
 *  @hw: pointer to the HW structure
 *
 *  Turn off the LEDs.
 **/
static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
{
        if (hw->phy.type == e1000_phy_ife)
                return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
                                (IFE_PSCL_PROBE_MODE |
                                 IFE_PSCL_PROBE_LEDS_OFF));

        ew32(LEDCTL, hw->mac.ledctl_mode1);
        return 0;
}

/**
 *  e1000_setup_led_pchlan - Configures SW controllable LED
 *  @hw: pointer to the HW structure
 *
 *  This prepares the SW controllable LED for use.
 **/
static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
{
        return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
}

/**
 *  e1000_cleanup_led_pchlan - Restore the default LED operation
 *  @hw: pointer to the HW structure
 *
 *  Return the LED back to the default configuration.
 **/
static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
{
        return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
}

/**
 *  e1000_led_on_pchlan - Turn LEDs on
 *  @hw: pointer to the HW structure
 *
 *  Turn on the LEDs.
 **/
static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
{
        u16 data = (u16)hw->mac.ledctl_mode2;
        u32 i, led;

        /* If no link, then turn LED on by setting the invert bit
         * for each LED that's mode is "link_up" in ledctl_mode2.
         */
        if (!(er32(STATUS) & E1000_STATUS_LU)) {
                for (i = 0; i < 3; i++) {
                        led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
                        if ((led & E1000_PHY_LED0_MODE_MASK) !=
                            E1000_LEDCTL_MODE_LINK_UP)
                                continue;
                        if (led & E1000_PHY_LED0_IVRT)
                                data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
                        else
                                data |= (E1000_PHY_LED0_IVRT << (i * 5));
                }
        }

        return e1e_wphy(hw, HV_LED_CONFIG, data);
}

/**
 *  e1000_led_off_pchlan - Turn LEDs off
 *  @hw: pointer to the HW structure
 *
 *  Turn off the LEDs.
 **/
static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
{
        u16 data = (u16)hw->mac.ledctl_mode1;
        u32 i, led;

        /* If no link, then turn LED off by clearing the invert bit
         * for each LED that's mode is "link_up" in ledctl_mode1.
         */
        if (!(er32(STATUS) & E1000_STATUS_LU)) {
                for (i = 0; i < 3; i++) {
                        led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
                        if ((led & E1000_PHY_LED0_MODE_MASK) !=
                            E1000_LEDCTL_MODE_LINK_UP)
                                continue;
                        if (led & E1000_PHY_LED0_IVRT)
                                data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
                        else
                                data |= (E1000_PHY_LED0_IVRT << (i * 5));
                }
        }

        return e1e_wphy(hw, HV_LED_CONFIG, data);
}

/**
 *  e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset
 *  @hw: pointer to the HW structure
 *
 *  Read appropriate register for the config done bit for completion status
 *  and configure the PHY through s/w for EEPROM-less parts.
 *
 *  NOTE: some silicon which is EEPROM-less will fail trying to read the
 *  config done bit, so only an error is logged and continues.  If we were
 *  to return with error, EEPROM-less silicon would not be able to be reset
 *  or change link.
 **/
static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
{
        s32 ret_val = 0;
        u32 bank = 0;
        u32 status;

        e1000e_get_cfg_done_generic(hw);

        /* Wait for indication from h/w that it has completed basic config */
        if (hw->mac.type >= e1000_ich10lan) {
                e1000_lan_init_done_ich8lan(hw);
        } else {
                ret_val = e1000e_get_auto_rd_done(hw);
                if (ret_val) {
                        /* When auto config read does not complete, do not
                         * return with an error. This can happen in situations
                         * where there is no eeprom and prevents getting link.
                         */
                        e_dbg("Auto Read Done did not complete\n");
                        ret_val = 0;
                }
        }

        /* Clear PHY Reset Asserted bit */
        status = er32(STATUS);
        if (status & E1000_STATUS_PHYRA)
                ew32(STATUS, status & ~E1000_STATUS_PHYRA);
        else
                e_dbg("PHY Reset Asserted not set - needs delay\n");

        /* If EEPROM is not marked present, init the IGP 3 PHY manually */
        if (hw->mac.type <= e1000_ich9lan) {
                if (!(er32(EECD) & E1000_EECD_PRES) &&
                    (hw->phy.type == e1000_phy_igp_3)) {
                        e1000e_phy_init_script_igp3(hw);
                }
        } else {
                if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
                        /* Maybe we should do a basic PHY config */
                        e_dbg("EEPROM not present\n");
                        ret_val = -E1000_ERR_CONFIG;
                }
        }

        return ret_val;
}

/**
 * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
 * @hw: pointer to the HW structure
 *
 * In the case of a PHY power down to save power, or to turn off link during a
 * driver unload, or wake on lan is not enabled, remove the link.
 **/
static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
{
        /* If the management interface is not enabled, then power down */
        if (!(hw->mac.ops.check_mng_mode(hw) ||
              hw->phy.ops.check_reset_block(hw)))
                e1000_power_down_phy_copper(hw);
}

/**
 *  e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
 *  @hw: pointer to the HW structure
 *
 *  Clears hardware counters specific to the silicon family and calls
 *  clear_hw_cntrs_generic to clear all general purpose counters.
 **/
static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
{
        u16 phy_data;
        s32 ret_val;

        e1000e_clear_hw_cntrs_base(hw);

        er32(ALGNERRC);
        er32(RXERRC);
        er32(TNCRS);
        er32(CEXTERR);
        er32(TSCTC);
        er32(TSCTFC);

        er32(MGTPRC);
        er32(MGTPDC);
        er32(MGTPTC);

        er32(IAC);
        er32(ICRXOC);

        /* Clear PHY statistics registers */
        if ((hw->phy.type == e1000_phy_82578) ||
            (hw->phy.type == e1000_phy_82579) ||
            (hw->phy.type == e1000_phy_i217) ||
            (hw->phy.type == e1000_phy_82577)) {
                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return;
                ret_val = hw->phy.ops.set_page(hw,
                                               HV_STATS_PAGE << IGP_PAGE_SHIFT);
                if (ret_val)
                        goto release;
                hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
                hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
release:
                hw->phy.ops.release(hw);
        }
}

static const struct e1000_mac_operations ich8_mac_ops = {
        /* check_mng_mode dependent on mac type */
        .check_for_link         = e1000_check_for_copper_link_ich8lan,
        /* cleanup_led dependent on mac type */
        .clear_hw_cntrs         = e1000_clear_hw_cntrs_ich8lan,
        .get_bus_info           = e1000_get_bus_info_ich8lan,
        .set_lan_id             = e1000_set_lan_id_single_port,
        .get_link_up_info       = e1000_get_link_up_info_ich8lan,
        /* led_on dependent on mac type */
        /* led_off dependent on mac type */
        .update_mc_addr_list    = e1000e_update_mc_addr_list_generic,
        .reset_hw               = e1000_reset_hw_ich8lan,
        .init_hw                = e1000_init_hw_ich8lan,
        .setup_link             = e1000_setup_link_ich8lan,
        .setup_physical_interface = e1000_setup_copper_link_ich8lan,
        /* id_led_init dependent on mac type */
        .config_collision_dist  = e1000e_config_collision_dist_generic,
        .rar_set                = e1000e_rar_set_generic,
        .rar_get_count          = e1000e_rar_get_count_generic,
};

static const struct e1000_phy_operations ich8_phy_ops = {
        .acquire                = e1000_acquire_swflag_ich8lan,
        .check_reset_block      = e1000_check_reset_block_ich8lan,
        .commit                 = NULL,
        .get_cfg_done           = e1000_get_cfg_done_ich8lan,
        .get_cable_length       = e1000e_get_cable_length_igp_2,
        .read_reg               = e1000e_read_phy_reg_igp,
        .release                = e1000_release_swflag_ich8lan,
        .reset                  = e1000_phy_hw_reset_ich8lan,
        .set_d0_lplu_state      = e1000_set_d0_lplu_state_ich8lan,
        .set_d3_lplu_state      = e1000_set_d3_lplu_state_ich8lan,
        .write_reg              = e1000e_write_phy_reg_igp,
};

static const struct e1000_nvm_operations ich8_nvm_ops = {
        .acquire                = e1000_acquire_nvm_ich8lan,
        .read                   = e1000_read_nvm_ich8lan,
        .release                = e1000_release_nvm_ich8lan,
        .reload                 = e1000e_reload_nvm_generic,
        .update                 = e1000_update_nvm_checksum_ich8lan,
        .valid_led_default      = e1000_valid_led_default_ich8lan,
        .validate               = e1000_validate_nvm_checksum_ich8lan,
        .write                  = e1000_write_nvm_ich8lan,
};

static const struct e1000_nvm_operations spt_nvm_ops = {
        .acquire                = e1000_acquire_nvm_ich8lan,
        .release                = e1000_release_nvm_ich8lan,
        .read                   = e1000_read_nvm_spt,
        .update                 = e1000_update_nvm_checksum_spt,
        .reload                 = e1000e_reload_nvm_generic,
        .valid_led_default      = e1000_valid_led_default_ich8lan,
        .validate               = e1000_validate_nvm_checksum_ich8lan,
        .write                  = e1000_write_nvm_ich8lan,
};

const struct e1000_info e1000_ich8_info = {
        .mac                    = e1000_ich8lan,
        .flags                  = FLAG_HAS_WOL
                                  | FLAG_IS_ICH
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_APME_IN_WUC,
        .pba                    = 8,
        .max_hw_frame_size      = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &ich8_nvm_ops,
};

const struct e1000_info e1000_ich9_info = {
        .mac                    = e1000_ich9lan,
        .flags                  = FLAG_HAS_JUMBO_FRAMES
                                  | FLAG_IS_ICH
                                  | FLAG_HAS_WOL
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_APME_IN_WUC,
        .pba                    = 18,
        .max_hw_frame_size      = DEFAULT_JUMBO,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &ich8_nvm_ops,
};

const struct e1000_info e1000_ich10_info = {
        .mac                    = e1000_ich10lan,
        .flags                  = FLAG_HAS_JUMBO_FRAMES
                                  | FLAG_IS_ICH
                                  | FLAG_HAS_WOL
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_APME_IN_WUC,
        .pba                    = 18,
        .max_hw_frame_size      = DEFAULT_JUMBO,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &ich8_nvm_ops,
};

const struct e1000_info e1000_pch_info = {
        .mac                    = e1000_pchlan,
        .flags                  = FLAG_IS_ICH
                                  | FLAG_HAS_WOL
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_HAS_JUMBO_FRAMES
                                  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
                                  | FLAG_APME_IN_WUC,
        .flags2                 = FLAG2_HAS_PHY_STATS,
        .pba                    = 26,
        .max_hw_frame_size      = 4096,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &ich8_nvm_ops,
};

const struct e1000_info e1000_pch2_info = {
        .mac                    = e1000_pch2lan,
        .flags                  = FLAG_IS_ICH
                                  | FLAG_HAS_WOL
                                  | FLAG_HAS_HW_TIMESTAMP
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_HAS_JUMBO_FRAMES
                                  | FLAG_APME_IN_WUC,
        .flags2                 = FLAG2_HAS_PHY_STATS
                                  | FLAG2_HAS_EEE,
        .pba                    = 26,
        .max_hw_frame_size      = 9022,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &ich8_nvm_ops,
};

const struct e1000_info e1000_pch_lpt_info = {
        .mac                    = e1000_pch_lpt,
        .flags                  = FLAG_IS_ICH
                                  | FLAG_HAS_WOL
                                  | FLAG_HAS_HW_TIMESTAMP
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_HAS_JUMBO_FRAMES
                                  | FLAG_APME_IN_WUC,
        .flags2                 = FLAG2_HAS_PHY_STATS
                                  | FLAG2_HAS_EEE
                                  | FLAG2_CHECK_SYSTIM_OVERFLOW,
        .pba                    = 26,
        .max_hw_frame_size      = 9022,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &ich8_nvm_ops,
};

const struct e1000_info e1000_pch_spt_info = {
        .mac                    = e1000_pch_spt,
        .flags                  = FLAG_IS_ICH
                                  | FLAG_HAS_WOL
                                  | FLAG_HAS_HW_TIMESTAMP
                                  | FLAG_HAS_CTRLEXT_ON_LOAD
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_HAS_JUMBO_FRAMES
                                  | FLAG_APME_IN_WUC,
        .flags2                 = FLAG2_HAS_PHY_STATS
                                  | FLAG2_HAS_EEE,
        .pba                    = 26,
        .max_hw_frame_size      = 9022,
        .get_variants           = e1000_get_variants_ich8lan,
        .mac_ops                = &ich8_mac_ops,
        .phy_ops                = &ich8_phy_ops,
        .nvm_ops                = &spt_nvm_ops,
};