1 /*******************************************************************************
3 Intel 10 Gigabit PCI Express Linux driver
4 Copyright(c) 1999 - 2016 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
32 #include "ixgbe_type.h"
33 #define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
34 #define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2
36 /* EEPROM byte offsets */
37 #define IXGBE_SFF_IDENTIFIER 0x0
38 #define IXGBE_SFF_IDENTIFIER_SFP 0x3
39 #define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
40 #define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
41 #define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
42 #define IXGBE_SFF_1GBE_COMP_CODES 0x6
43 #define IXGBE_SFF_10GBE_COMP_CODES 0x3
44 #define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
45 #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
46 #define IXGBE_SFF_SFF_8472_SWAP 0x5C
47 #define IXGBE_SFF_SFF_8472_COMP 0x5E
48 #define IXGBE_SFF_SFF_8472_OSCB 0x6E
49 #define IXGBE_SFF_SFF_8472_ESCB 0x76
50 #define IXGBE_SFF_IDENTIFIER_QSFP_PLUS 0xD
51 #define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5
52 #define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6
53 #define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7
54 #define IXGBE_SFF_QSFP_CONNECTOR 0x82
55 #define IXGBE_SFF_QSFP_10GBE_COMP 0x83
56 #define IXGBE_SFF_QSFP_1GBE_COMP 0x86
57 #define IXGBE_SFF_QSFP_CABLE_LENGTH 0x92
58 #define IXGBE_SFF_QSFP_DEVICE_TECH 0x93
61 #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
62 #define IXGBE_SFF_DA_ACTIVE_CABLE 0x8
63 #define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4
64 #define IXGBE_SFF_1GBASESX_CAPABLE 0x1
65 #define IXGBE_SFF_1GBASELX_CAPABLE 0x2
66 #define IXGBE_SFF_1GBASET_CAPABLE 0x8
67 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10
68 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20
69 #define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8
70 #define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
71 #define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
72 #define IXGBE_SFF_ADDRESSING_MODE 0x4
73 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
74 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
75 #define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
76 #define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL 0x0
77 #define IXGBE_I2C_EEPROM_READ_MASK 0x100
78 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
79 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
80 #define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
81 #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
82 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
83 #define IXGBE_CS4227 0xBE /* CS4227 address */
84 #define IXGBE_CS4227_GLOBAL_ID_LSB 0
85 #define IXGBE_CS4227_GLOBAL_ID_MSB 1
86 #define IXGBE_CS4227_SCRATCH 2
87 #define IXGBE_CS4223_PHY_ID 0x7003 /* Quad port */
88 #define IXGBE_CS4227_PHY_ID 0x3003 /* Dual port */
89 #define IXGBE_CS4227_RESET_PENDING 0x1357
90 #define IXGBE_CS4227_RESET_COMPLETE 0x5AA5
91 #define IXGBE_CS4227_RETRIES 15
92 #define IXGBE_CS4227_EFUSE_STATUS 0x0181
93 #define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to set speed */
94 #define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to set EDC */
95 #define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to set speed */
96 #define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */
97 #define IXGBE_CS4227_EEPROM_STATUS 0x5001
98 #define IXGBE_CS4227_EEPROM_LOAD_OK 0x0001
99 #define IXGBE_CS4227_SPEED_1G 0x8000
100 #define IXGBE_CS4227_SPEED_10G 0
101 #define IXGBE_CS4227_EDC_MODE_CX1 0x0002
102 #define IXGBE_CS4227_EDC_MODE_SR 0x0004
103 #define IXGBE_CS4227_EDC_MODE_DIAG 0x0008
104 #define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */
105 #define IXGBE_CS4227_RESET_DELAY 500 /* milliseconds */
106 #define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */
107 #define IXGBE_PE 0xE0 /* Port expander addr */
108 #define IXGBE_PE_OUTPUT 1 /* Output reg offset */
109 #define IXGBE_PE_CONFIG 3 /* Config reg offset */
110 #define IXGBE_PE_BIT1 BIT(1)
112 /* Flow control defines */
113 #define IXGBE_TAF_SYM_PAUSE 0x400
114 #define IXGBE_TAF_ASM_PAUSE 0x800
116 /* Bit-shift macros */
117 #define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
118 #define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
119 #define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
121 /* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
122 #define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
123 #define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
124 #define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
125 #define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
127 /* I2C SDA and SCL timing parameters for standard mode */
128 #define IXGBE_I2C_T_HD_STA 4
129 #define IXGBE_I2C_T_LOW 5
130 #define IXGBE_I2C_T_HIGH 4
131 #define IXGBE_I2C_T_SU_STA 5
132 #define IXGBE_I2C_T_HD_DATA 5
133 #define IXGBE_I2C_T_SU_DATA 1
134 #define IXGBE_I2C_T_RISE 1
135 #define IXGBE_I2C_T_FALL 1
136 #define IXGBE_I2C_T_SU_STO 4
137 #define IXGBE_I2C_T_BUF 5
139 #define IXGBE_SFP_DETECT_RETRIES 2
141 #define IXGBE_TN_LASI_STATUS_REG 0x9005
142 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008
144 /* SFP+ SFF-8472 Compliance code */
145 #define IXGBE_SFF_SFF_8472_UNSUP 0x00
147 s32
ixgbe_identify_phy_generic(struct ixgbe_hw
*hw
);
148 s32
ixgbe_reset_phy_generic(struct ixgbe_hw
*hw
);
149 s32
ixgbe_read_phy_reg_generic(struct ixgbe_hw
*hw
, u32 reg_addr
,
150 u32 device_type
, u16
*phy_data
);
151 s32
ixgbe_write_phy_reg_generic(struct ixgbe_hw
*hw
, u32 reg_addr
,
152 u32 device_type
, u16 phy_data
);
153 s32
ixgbe_read_phy_reg_mdi(struct ixgbe_hw
*hw
, u32 reg_addr
,
154 u32 device_type
, u16
*phy_data
);
155 s32
ixgbe_write_phy_reg_mdi(struct ixgbe_hw
*hw
, u32 reg_addr
,
156 u32 device_type
, u16 phy_data
);
157 s32
ixgbe_setup_phy_link_generic(struct ixgbe_hw
*hw
);
158 s32
ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw
*hw
,
159 ixgbe_link_speed speed
,
160 bool autoneg_wait_to_complete
);
161 s32
ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw
*hw
,
162 ixgbe_link_speed
*speed
,
164 bool ixgbe_check_reset_blocked(struct ixgbe_hw
*hw
);
167 s32
ixgbe_check_phy_link_tnx(struct ixgbe_hw
*hw
,
168 ixgbe_link_speed
*speed
,
170 s32
ixgbe_setup_phy_link_tnx(struct ixgbe_hw
*hw
);
172 s32
ixgbe_reset_phy_nl(struct ixgbe_hw
*hw
);
173 s32
ixgbe_set_copper_phy_power(struct ixgbe_hw
*hw
, bool on
);
174 s32
ixgbe_identify_module_generic(struct ixgbe_hw
*hw
);
175 s32
ixgbe_identify_sfp_module_generic(struct ixgbe_hw
*hw
);
176 s32
ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw
*hw
,
179 s32
ixgbe_tn_check_overtemp(struct ixgbe_hw
*hw
);
180 s32
ixgbe_read_i2c_byte_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
181 u8 dev_addr
, u8
*data
);
182 s32
ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw
*hw
, u8 byte_offset
,
183 u8 dev_addr
, u8
*data
);
184 s32
ixgbe_write_i2c_byte_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
185 u8 dev_addr
, u8 data
);
186 s32
ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw
*hw
, u8 byte_offset
,
187 u8 dev_addr
, u8 data
);
188 s32
ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
190 s32
ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
192 s32
ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
194 s32
ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw
*, u8 addr
, u16 reg
,
195 u16
*val
, bool lock
);
196 s32
ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw
*, u8 addr
, u16 reg
,
198 #endif /* _IXGBE_PHY_H_ */