drivers/net/phy/bcm-cygnus.c

   1 /*
   2  * Copyright (C) 2015 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License as
   6  * published by the Free Software Foundation version 2.
   7  *
   8  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
   9  * kind, whether express or implied; without even the implied warranty
  10  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11  * GNU General Public License for more details.
  12  */
  13
  14 /* Broadcom Cygnus SoC internal transceivers support. */
  15 #include "bcm-phy-lib.h"
  16 #include <linux/brcmphy.h>
  17 #include <linux/module.h>
  18 #include <linux/netdevice.h>
  19 #include <linux/phy.h>
  20
  21 /* Broadcom Cygnus Phy specific registers */
  22 #define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0  0x91E5 /* VDAL Control register */
  23
  24 static int bcm_cygnus_afe_config(struct phy_device *phydev)
  25 {
  26         int rc;
  27
  28         /* ensure smdspclk is enabled */
  29         rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30);
  30         if (rc < 0)
  31                 return rc;
  32
  33         /* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
  34         rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
  35         if (rc < 0)
  36                 return rc;
  37
  38         /* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/
  39         rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
  40         if (rc < 0)
  41                 return rc;
  42
  43         /* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
  44         rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
  45         if (rc < 0)
  46                 return rc;
  47
  48         /* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
  49         rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
  50         if (rc < 0)
  51                 return rc;
  52
  53         /* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
  54         rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
  55         if (rc < 0)
  56                 return rc;
  57
  58         /* Adjust bias current trim to overcome digital offSet */
  59         rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02);
  60         if (rc < 0)
  61                 return rc;
  62
  63         /* make rcal=100, since rdb default is 000 */
  64         rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10);
  65         if (rc < 0)
  66                 return rc;
  67
  68         /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
  69         rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10);
  70         if (rc < 0)
  71                 return rc;
  72
  73         /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
  74         rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00);
  75
  76         return 0;
  77 }
  78
  79 static int bcm_cygnus_config_init(struct phy_device *phydev)
  80 {
  81         int reg, rc;
  82
  83         reg = phy_read(phydev, MII_BCM54XX_ECR);
  84         if (reg < 0)
  85                 return reg;
  86
  87         /* Mask interrupts globally. */
  88         reg |= MII_BCM54XX_ECR_IM;
  89         rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
  90         if (rc)
  91                 return rc;
  92
  93         /* Unmask events of interest */
  94         reg = ~(MII_BCM54XX_INT_DUPLEX |
  95                 MII_BCM54XX_INT_SPEED |
  96                 MII_BCM54XX_INT_LINK);
  97         rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
  98         if (rc)
  99                 return rc;
 100
 101         /* Apply AFE settings for the PHY */
 102         rc = bcm_cygnus_afe_config(phydev);
 103         if (rc)
 104                 return rc;
 105
 106         /* Advertise EEE */
 107         rc = bcm_phy_set_eee(phydev, true);
 108         if (rc)
 109                 return rc;
 110
 111         /* Enable APD */
 112         return bcm_phy_enable_apd(phydev, false);
 113 }
 114
 115 static int bcm_cygnus_resume(struct phy_device *phydev)
 116 {
 117         int rc;
 118
 119         genphy_resume(phydev);
 120
 121         /* Re-initialize the PHY to apply AFE work-arounds and
 122          * configurations when coming out of suspend.
 123          */
 124         rc = bcm_cygnus_config_init(phydev);
 125         if (rc)
 126                 return rc;
 127
 128         /* restart auto negotiation with the new settings */
 129         return genphy_config_aneg(phydev);
 130 }
 131
 132 static struct phy_driver bcm_cygnus_phy_driver[] = {
 133 {
 134         .phy_id        = PHY_ID_BCM_CYGNUS,
 135         .phy_id_mask   = 0xfffffff0,
 136         .name          = "Broadcom Cygnus PHY",
 137         .features      = PHY_GBIT_FEATURES,
 138         .config_init   = bcm_cygnus_config_init,
 139         .config_aneg   = genphy_config_aneg,
 140         .read_status   = genphy_read_status,
 141         .ack_interrupt = bcm_phy_ack_intr,
 142         .config_intr   = bcm_phy_config_intr,
 143         .suspend       = genphy_suspend,
 144         .resume        = bcm_cygnus_resume,
 145 } };
 146
 147 static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
 148         { PHY_ID_BCM_CYGNUS, 0xfffffff0, },
 149         { }
 150 };
 151 MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
 152
 153 module_phy_driver(bcm_cygnus_phy_driver);
 154
 155 MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver");
 156 MODULE_LICENSE("GPL v2");
 157 MODULE_AUTHOR("Broadcom Corporation");