x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / nvmem / bcm-ocotp.c
blob646cadbf1f9390f3e298b0db325a2d2e5321bedc
1 /*
2 * Copyright (C) 2016 Broadcom
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation version 2.
8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
9 * kind, whether express or implied; without even the implied warranty
10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
14 #include <linux/delay.h>
15 #include <linux/device.h>
16 #include <linux/io.h>
17 #include <linux/module.h>
18 #include <linux/nvmem-provider.h>
19 #include <linux/of.h>
20 #include <linux/of_address.h>
21 #include <linux/platform_device.h>
24 * # of tries for OTP Status. The time to execute a command varies. The slowest
25 * commands are writes which also vary based on the # of bits turned on. Writing
26 * 0xffffffff takes ~3800 us.
28 #define OTPC_RETRIES 5000
30 /* Sequence to enable OTP program */
31 #define OTPC_PROG_EN_SEQ { 0xf, 0x4, 0x8, 0xd }
33 /* OTPC Commands */
34 #define OTPC_CMD_READ 0x0
35 #define OTPC_CMD_OTP_PROG_ENABLE 0x2
36 #define OTPC_CMD_OTP_PROG_DISABLE 0x3
37 #define OTPC_CMD_PROGRAM 0xA
39 /* OTPC Status Bits */
40 #define OTPC_STAT_CMD_DONE BIT(1)
41 #define OTPC_STAT_PROG_OK BIT(2)
43 /* OTPC register definition */
44 #define OTPC_MODE_REG_OFFSET 0x0
45 #define OTPC_MODE_REG_OTPC_MODE 0
46 #define OTPC_COMMAND_OFFSET 0x4
47 #define OTPC_COMMAND_COMMAND_WIDTH 6
48 #define OTPC_CMD_START_OFFSET 0x8
49 #define OTPC_CMD_START_START 0
50 #define OTPC_CPU_STATUS_OFFSET 0xc
51 #define OTPC_CPUADDR_REG_OFFSET 0x28
52 #define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16
53 #define OTPC_CPU_WRITE_REG_OFFSET 0x2c
55 #define OTPC_CMD_MASK (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1)
56 #define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1)
59 struct otpc_map {
60 /* in words. */
61 u32 otpc_row_size;
62 /* 128 bit row / 4 words support. */
63 u16 data_r_offset[4];
64 /* 128 bit row / 4 words support. */
65 u16 data_w_offset[4];
68 static struct otpc_map otp_map = {
69 .otpc_row_size = 1,
70 .data_r_offset = {0x10},
71 .data_w_offset = {0x2c},
74 static struct otpc_map otp_map_v2 = {
75 .otpc_row_size = 2,
76 .data_r_offset = {0x10, 0x5c},
77 .data_w_offset = {0x2c, 0x64},
80 struct otpc_priv {
81 struct device *dev;
82 void __iomem *base;
83 struct otpc_map *map;
84 struct nvmem_config *config;
87 static inline void set_command(void __iomem *base, u32 command)
89 writel(command & OTPC_CMD_MASK, base + OTPC_COMMAND_OFFSET);
92 static inline void set_cpu_address(void __iomem *base, u32 addr)
94 writel(addr & OTPC_ADDR_MASK, base + OTPC_CPUADDR_REG_OFFSET);
97 static inline void set_start_bit(void __iomem *base)
99 writel(1 << OTPC_CMD_START_START, base + OTPC_CMD_START_OFFSET);
102 static inline void reset_start_bit(void __iomem *base)
104 writel(0, base + OTPC_CMD_START_OFFSET);
107 static inline void write_cpu_data(void __iomem *base, u32 value)
109 writel(value, base + OTPC_CPU_WRITE_REG_OFFSET);
112 static int poll_cpu_status(void __iomem *base, u32 value)
114 u32 status;
115 u32 retries;
117 for (retries = 0; retries < OTPC_RETRIES; retries++) {
118 status = readl(base + OTPC_CPU_STATUS_OFFSET);
119 if (status & value)
120 break;
121 udelay(1);
123 if (retries == OTPC_RETRIES)
124 return -EAGAIN;
126 return 0;
129 static int enable_ocotp_program(void __iomem *base)
131 static const u32 vals[] = OTPC_PROG_EN_SEQ;
132 int i;
133 int ret;
135 /* Write the magic sequence to enable programming */
136 set_command(base, OTPC_CMD_OTP_PROG_ENABLE);
137 for (i = 0; i < ARRAY_SIZE(vals); i++) {
138 write_cpu_data(base, vals[i]);
139 set_start_bit(base);
140 ret = poll_cpu_status(base, OTPC_STAT_CMD_DONE);
141 reset_start_bit(base);
142 if (ret)
143 return ret;
146 return poll_cpu_status(base, OTPC_STAT_PROG_OK);
149 static int disable_ocotp_program(void __iomem *base)
151 int ret;
153 set_command(base, OTPC_CMD_OTP_PROG_DISABLE);
154 set_start_bit(base);
155 ret = poll_cpu_status(base, OTPC_STAT_PROG_OK);
156 reset_start_bit(base);
158 return ret;
161 static int bcm_otpc_read(void *context, unsigned int offset, void *val,
162 size_t bytes)
164 struct otpc_priv *priv = context;
165 u32 *buf = val;
166 u32 bytes_read;
167 u32 address = offset / priv->config->word_size;
168 int i, ret;
170 for (bytes_read = 0; bytes_read < bytes;) {
171 set_command(priv->base, OTPC_CMD_READ);
172 set_cpu_address(priv->base, address++);
173 set_start_bit(priv->base);
174 ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
175 if (ret) {
176 dev_err(priv->dev, "otp read error: 0x%x", ret);
177 return -EIO;
180 for (i = 0; i < priv->map->otpc_row_size; i++) {
181 *buf++ = readl(priv->base +
182 priv->map->data_r_offset[i]);
183 bytes_read += sizeof(*buf);
186 reset_start_bit(priv->base);
189 return 0;
192 static int bcm_otpc_write(void *context, unsigned int offset, void *val,
193 size_t bytes)
195 struct otpc_priv *priv = context;
196 u32 *buf = val;
197 u32 bytes_written;
198 u32 address = offset / priv->config->word_size;
199 int i, ret;
201 if (offset % priv->config->word_size)
202 return -EINVAL;
204 ret = enable_ocotp_program(priv->base);
205 if (ret)
206 return -EIO;
208 for (bytes_written = 0; bytes_written < bytes;) {
209 set_command(priv->base, OTPC_CMD_PROGRAM);
210 set_cpu_address(priv->base, address++);
211 for (i = 0; i < priv->map->otpc_row_size; i++) {
212 writel(*buf, priv->base + priv->map->data_r_offset[i]);
213 buf++;
214 bytes_written += sizeof(*buf);
216 set_start_bit(priv->base);
217 ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
218 reset_start_bit(priv->base);
219 if (ret) {
220 dev_err(priv->dev, "otp write error: 0x%x", ret);
221 return -EIO;
225 disable_ocotp_program(priv->base);
227 return 0;
230 static struct nvmem_config bcm_otpc_nvmem_config = {
231 .name = "bcm-ocotp",
232 .read_only = false,
233 .word_size = 4,
234 .stride = 4,
235 .owner = THIS_MODULE,
236 .reg_read = bcm_otpc_read,
237 .reg_write = bcm_otpc_write,
240 static const struct of_device_id bcm_otpc_dt_ids[] = {
241 { .compatible = "brcm,ocotp" },
242 { .compatible = "brcm,ocotp-v2" },
243 { },
245 MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids);
247 static int bcm_otpc_probe(struct platform_device *pdev)
249 struct device *dev = &pdev->dev;
250 struct device_node *dn = dev->of_node;
251 struct resource *res;
252 struct otpc_priv *priv;
253 struct nvmem_device *nvmem;
254 int err;
255 u32 num_words;
257 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
258 if (!priv)
259 return -ENOMEM;
261 if (of_device_is_compatible(dev->of_node, "brcm,ocotp"))
262 priv->map = &otp_map;
263 else if (of_device_is_compatible(dev->of_node, "brcm,ocotp-v2"))
264 priv->map = &otp_map_v2;
265 else {
266 dev_err(&pdev->dev,
267 "%s otpc config map not defined\n", __func__);
268 return -EINVAL;
271 /* Get OTP base address register. */
272 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
273 priv->base = devm_ioremap_resource(dev, res);
274 if (IS_ERR(priv->base)) {
275 dev_err(dev, "unable to map I/O memory\n");
276 return PTR_ERR(priv->base);
279 /* Enable CPU access to OTPC. */
280 writel(readl(priv->base + OTPC_MODE_REG_OFFSET) |
281 BIT(OTPC_MODE_REG_OTPC_MODE),
282 priv->base + OTPC_MODE_REG_OFFSET);
283 reset_start_bit(priv->base);
285 /* Read size of memory in words. */
286 err = of_property_read_u32(dn, "brcm,ocotp-size", &num_words);
287 if (err) {
288 dev_err(dev, "size parameter not specified\n");
289 return -EINVAL;
290 } else if (num_words == 0) {
291 dev_err(dev, "size must be > 0\n");
292 return -EINVAL;
295 bcm_otpc_nvmem_config.size = 4 * num_words;
296 bcm_otpc_nvmem_config.dev = dev;
297 bcm_otpc_nvmem_config.priv = priv;
299 if (of_device_is_compatible(dev->of_node, "brcm,ocotp-v2")) {
300 bcm_otpc_nvmem_config.word_size = 8;
301 bcm_otpc_nvmem_config.stride = 8;
304 priv->config = &bcm_otpc_nvmem_config;
306 nvmem = nvmem_register(&bcm_otpc_nvmem_config);
307 if (IS_ERR(nvmem)) {
308 dev_err(dev, "error registering nvmem config\n");
309 return PTR_ERR(nvmem);
312 platform_set_drvdata(pdev, nvmem);
314 return 0;
317 static int bcm_otpc_remove(struct platform_device *pdev)
319 struct nvmem_device *nvmem = platform_get_drvdata(pdev);
321 return nvmem_unregister(nvmem);
324 static struct platform_driver bcm_otpc_driver = {
325 .probe = bcm_otpc_probe,
326 .remove = bcm_otpc_remove,
327 .driver = {
328 .name = "brcm-otpc",
329 .of_match_table = bcm_otpc_dt_ids,
332 module_platform_driver(bcm_otpc_driver);
334 MODULE_DESCRIPTION("Broadcom OTPC driver");
335 MODULE_LICENSE("GPL v2");