x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / phy / phy-qcom-ufs-qmp-14nm.h
blob3aefdbacbcd0042f32a12fe26f710656fb70c9dc
1 /*
2 * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
15 #ifndef UFS_QCOM_PHY_QMP_14NM_H_
16 #define UFS_QCOM_PHY_QMP_14NM_H_
18 #include "phy-qcom-ufs-i.h"
20 /* QCOM UFS PHY control registers */
21 #define COM_OFF(x) (0x000 + x)
22 #define PHY_OFF(x) (0xC00 + x)
23 #define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
24 #define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
26 /* UFS PHY QSERDES COM registers */
27 #define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
28 #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
29 #define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
30 #define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
31 #define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
32 #define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
33 #define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
34 #define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
35 #define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
36 #define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
37 #define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
38 #define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
39 #define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
40 #define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
41 #define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
42 #define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
43 #define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
44 #define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
45 #define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
46 #define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
47 #define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
48 #define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
49 #define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
50 #define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
51 #define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
52 #define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
53 #define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
54 #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
55 #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
56 #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
57 #define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
58 #define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
59 #define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
60 #define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
61 #define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
62 #define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
63 #define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
64 #define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
65 #define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
66 #define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
67 #define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
68 #define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
69 #define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
70 #define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
71 #define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
72 #define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
74 /* UFS PHY registers */
75 #define UFS_PHY_PHY_START PHY_OFF(0x00)
76 #define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
77 #define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
79 /* UFS PHY TX registers */
80 #define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
81 #define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
83 /* UFS PHY RX registers */
84 #define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
85 #define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
86 #define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
87 #define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
88 #define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
89 #define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
90 #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
91 #define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
92 #define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
93 #define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
94 #define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
97 * This structure represents the 14nm specific phy.
98 * common_cfg MUST remain the first field in this structure
99 * in case extra fields are added. This way, when calling
100 * get_ufs_qcom_phy() of generic phy, we can extract the
101 * common phy structure (struct ufs_qcom_phy) out of it
102 * regardless of the relevant specific phy.
104 struct ufs_qcom_phy_qmp_14nm {
105 struct ufs_qcom_phy common_cfg;
108 static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
109 UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
110 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
111 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
112 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
113 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
114 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
115 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
116 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
117 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
118 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
119 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
120 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
121 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
122 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
123 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
124 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
125 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
126 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
127 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
128 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
129 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
130 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
131 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
132 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
133 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
134 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
135 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
136 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
137 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
138 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
139 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
140 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
141 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
142 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
143 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
144 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
145 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
146 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
147 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
148 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
149 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
150 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
151 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
152 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
153 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
154 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
155 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
157 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
158 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
160 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
161 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
162 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
163 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
164 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
165 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
166 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
167 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
168 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
169 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
170 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
173 static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
174 UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
177 #endif