x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / pwm / pwm-lpss-pci.c
blobc1527cb645be8d0c038742559e270d1914ac8726
1 /*
2 * Intel Low Power Subsystem PWM controller PCI driver
4 * Copyright (C) 2014, Intel Corporation
6 * Derived from the original pwm-lpss.c
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/pci.h>
16 #include <linux/pm_runtime.h>
18 #include "pwm-lpss.h"
20 /* BayTrail */
21 static const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
22 .clk_rate = 25000000,
23 .npwm = 1,
24 .base_unit_bits = 16,
27 /* Braswell */
28 static const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
29 .clk_rate = 19200000,
30 .npwm = 1,
31 .base_unit_bits = 16,
34 /* Broxton */
35 static const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = {
36 .clk_rate = 19200000,
37 .npwm = 4,
38 .base_unit_bits = 22,
39 .bypass = true,
42 /* Tangier */
43 static const struct pwm_lpss_boardinfo pwm_lpss_tng_info = {
44 .clk_rate = 19200000,
45 .npwm = 4,
46 .base_unit_bits = 22,
49 static int pwm_lpss_probe_pci(struct pci_dev *pdev,
50 const struct pci_device_id *id)
52 const struct pwm_lpss_boardinfo *info;
53 struct pwm_lpss_chip *lpwm;
54 int err;
56 err = pcim_enable_device(pdev);
57 if (err < 0)
58 return err;
60 info = (struct pwm_lpss_boardinfo *)id->driver_data;
61 lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
62 if (IS_ERR(lpwm))
63 return PTR_ERR(lpwm);
65 pci_set_drvdata(pdev, lpwm);
67 pm_runtime_put(&pdev->dev);
68 pm_runtime_allow(&pdev->dev);
70 return 0;
73 static void pwm_lpss_remove_pci(struct pci_dev *pdev)
75 struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
77 pm_runtime_forbid(&pdev->dev);
78 pm_runtime_get_sync(&pdev->dev);
80 pwm_lpss_remove(lpwm);
83 #ifdef CONFIG_PM
84 static int pwm_lpss_runtime_suspend_pci(struct device *dev)
87 * The PCI core will handle transition to D3 automatically. We only
88 * need to provide runtime PM hooks for that to happen.
90 return 0;
93 static int pwm_lpss_runtime_resume_pci(struct device *dev)
95 return 0;
97 #endif
99 static const struct dev_pm_ops pwm_lpss_pci_pm = {
100 SET_RUNTIME_PM_OPS(pwm_lpss_runtime_suspend_pci,
101 pwm_lpss_runtime_resume_pci, NULL)
104 static const struct pci_device_id pwm_lpss_pci_ids[] = {
105 { PCI_VDEVICE(INTEL, 0x0ac8), (unsigned long)&pwm_lpss_bxt_info},
106 { PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
107 { PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
108 { PCI_VDEVICE(INTEL, 0x11a5), (unsigned long)&pwm_lpss_tng_info},
109 { PCI_VDEVICE(INTEL, 0x1ac8), (unsigned long)&pwm_lpss_bxt_info},
110 { PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
111 { PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
112 { PCI_VDEVICE(INTEL, 0x31c8), (unsigned long)&pwm_lpss_bxt_info},
113 { PCI_VDEVICE(INTEL, 0x5ac8), (unsigned long)&pwm_lpss_bxt_info},
114 { },
116 MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
118 static struct pci_driver pwm_lpss_driver_pci = {
119 .name = "pwm-lpss",
120 .id_table = pwm_lpss_pci_ids,
121 .probe = pwm_lpss_probe_pci,
122 .remove = pwm_lpss_remove_pci,
123 .driver = {
124 .pm = &pwm_lpss_pci_pm,
127 module_pci_driver(pwm_lpss_driver_pci);
129 MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
130 MODULE_LICENSE("GPL v2");