drivers/rtc/rtc-stmp3xxx.c

   1 /*
   2  * Freescale STMP37XX/STMP378X Real Time Clock driver
   3  *
   4  * Copyright (c) 2007 Sigmatel, Inc.
   5  * Peter Hartley, <peter.hartley@sigmatel.com>
   6  *
   7  * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
   8  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
   9  * Copyright 2011 Wolfram Sang, Pengutronix e.K.
  10  */
  11
  12 /*
  13  * The code contained herein is licensed under the GNU General Public
  14  * License. You may obtain a copy of the GNU General Public License
  15  * Version 2 or later at the following locations:
  16  *
  17  * http://www.opensource.org/licenses/gpl-license.html
  18  * http://www.gnu.org/copyleft/gpl.html
  19  */
  20 #include <linux/kernel.h>
  21 #include <linux/module.h>
  22 #include <linux/io.h>
  23 #include <linux/init.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/delay.h>
  27 #include <linux/rtc.h>
  28 #include <linux/slab.h>
  29 #include <linux/of_device.h>
  30 #include <linux/of.h>
  31 #include <linux/stmp_device.h>
  32 #include <linux/stmp3xxx_rtc_wdt.h>
  33
  34 #define STMP3XXX_RTC_CTRL                       0x0
  35 #define STMP3XXX_RTC_CTRL_ALARM_IRQ_EN          0x00000001
  36 #define STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN        0x00000002
  37 #define STMP3XXX_RTC_CTRL_ALARM_IRQ             0x00000004
  38 #define STMP3XXX_RTC_CTRL_WATCHDOGEN            0x00000010
  39
  40 #define STMP3XXX_RTC_STAT                       0x10
  41 #define STMP3XXX_RTC_STAT_STALE_SHIFT           16
  42 #define STMP3XXX_RTC_STAT_RTC_PRESENT           0x80000000
  43 #define STMP3XXX_RTC_STAT_XTAL32000_PRESENT     0x10000000
  44 #define STMP3XXX_RTC_STAT_XTAL32768_PRESENT     0x08000000
  45
  46 #define STMP3XXX_RTC_SECONDS                    0x30
  47
  48 #define STMP3XXX_RTC_ALARM                      0x40
  49
  50 #define STMP3XXX_RTC_WATCHDOG                   0x50
  51
  52 #define STMP3XXX_RTC_PERSISTENT0                0x60
  53 #define STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE            (1 << 0)
  54 #define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN          (1 << 1)
  55 #define STMP3XXX_RTC_PERSISTENT0_ALARM_EN               (1 << 2)
  56 #define STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP        (1 << 4)
  57 #define STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP        (1 << 5)
  58 #define STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ            (1 << 6)
  59 #define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE             (1 << 7)
  60
  61 #define STMP3XXX_RTC_PERSISTENT1                0x70
  62 /* missing bitmask in headers */
  63 #define STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER  0x80000000
  64
  65 struct stmp3xxx_rtc_data {
  66         struct rtc_device *rtc;
  67         void __iomem *io;
  68         int irq_alarm;
  69 };
  70
  71 #if IS_ENABLED(CONFIG_STMP3XXX_RTC_WATCHDOG)
  72 /**
  73  * stmp3xxx_wdt_set_timeout - configure the watchdog inside the STMP3xxx RTC
  74  * @dev: the parent device of the watchdog (= the RTC)
  75  * @timeout: the desired value for the timeout register of the watchdog.
  76  *           0 disables the watchdog
  77  *
  78  * The watchdog needs one register and two bits which are in the RTC domain.
  79  * To handle the resource conflict, the RTC driver will create another
  80  * platform_device for the watchdog driver as a child of the RTC device.
  81  * The watchdog driver is passed the below accessor function via platform_data
  82  * to configure the watchdog. Locking is not needed because accessing SET/CLR
  83  * registers is atomic.
  84  */
  85
  86 static void stmp3xxx_wdt_set_timeout(struct device *dev, u32 timeout)
  87 {
  88         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
  89
  90         if (timeout) {
  91                 writel(timeout, rtc_data->io + STMP3XXX_RTC_WATCHDOG);
  92                 writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
  93                        rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
  94                 writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
  95                        rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_SET);
  96         } else {
  97                 writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
  98                        rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
  99                 writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
 100                        rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_CLR);
 101         }
 102 }
 103
 104 static struct stmp3xxx_wdt_pdata wdt_pdata = {
 105         .wdt_set_timeout = stmp3xxx_wdt_set_timeout,
 106 };
 107
 108 static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
 109 {
 110         int rc = -1;
 111         struct platform_device *wdt_pdev =
 112                 platform_device_alloc("stmp3xxx_rtc_wdt", rtc_pdev->id);
 113
 114         if (wdt_pdev) {
 115                 wdt_pdev->dev.parent = &rtc_pdev->dev;
 116                 wdt_pdev->dev.platform_data = &wdt_pdata;
 117                 rc = platform_device_add(wdt_pdev);
 118         }
 119
 120         if (rc)
 121                 dev_err(&rtc_pdev->dev,
 122                         "failed to register stmp3xxx_rtc_wdt\n");
 123 }
 124 #else
 125 static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
 126 {
 127 }
 128 #endif /* CONFIG_STMP3XXX_RTC_WATCHDOG */
 129
 130 static int stmp3xxx_wait_time(struct stmp3xxx_rtc_data *rtc_data)
 131 {
 132         int timeout = 5000; /* 3ms according to i.MX28 Ref Manual */
 133         /*
 134          * The i.MX28 Applications Processor Reference Manual, Rev. 1, 2010
 135          * states:
 136          * | The order in which registers are updated is
 137          * | Persistent 0, 1, 2, 3, 4, 5, Alarm, Seconds.
 138          * | (This list is in bitfield order, from LSB to MSB, as they would
 139          * | appear in the STALE_REGS and NEW_REGS bitfields of the HW_RTC_STAT
 140          * | register. For example, the Seconds register corresponds to
 141          * | STALE_REGS or NEW_REGS containing 0x80.)
 142          */
 143         do {
 144                 if (!(readl(rtc_data->io + STMP3XXX_RTC_STAT) &
 145                                 (0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)))
 146                         return 0;
 147                 udelay(1);
 148         } while (--timeout > 0);
 149         return (readl(rtc_data->io + STMP3XXX_RTC_STAT) &
 150                 (0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)) ? -ETIME : 0;
 151 }
 152
 153 /* Time read/write */
 154 static int stmp3xxx_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 155 {
 156         int ret;
 157         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 158
 159         ret = stmp3xxx_wait_time(rtc_data);
 160         if (ret)
 161                 return ret;
 162
 163         rtc_time_to_tm(readl(rtc_data->io + STMP3XXX_RTC_SECONDS), rtc_tm);
 164         return 0;
 165 }
 166
 167 static int stmp3xxx_rtc_set_mmss(struct device *dev, unsigned long t)
 168 {
 169         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 170
 171         writel(t, rtc_data->io + STMP3XXX_RTC_SECONDS);
 172         return stmp3xxx_wait_time(rtc_data);
 173 }
 174
 175 /* interrupt(s) handler */
 176 static irqreturn_t stmp3xxx_rtc_interrupt(int irq, void *dev_id)
 177 {
 178         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev_id);
 179         u32 status = readl(rtc_data->io + STMP3XXX_RTC_CTRL);
 180
 181         if (status & STMP3XXX_RTC_CTRL_ALARM_IRQ) {
 182                 writel(STMP3XXX_RTC_CTRL_ALARM_IRQ,
 183                         rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
 184                 rtc_update_irq(rtc_data->rtc, 1, RTC_AF | RTC_IRQF);
 185                 return IRQ_HANDLED;
 186         }
 187
 188         return IRQ_NONE;
 189 }
 190
 191 static int stmp3xxx_alarm_irq_enable(struct device *dev, unsigned int enabled)
 192 {
 193         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 194
 195         if (enabled) {
 196                 writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 197                                 STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
 198                         rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
 199                                 STMP_OFFSET_REG_SET);
 200                 writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
 201                         rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
 202         } else {
 203                 writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 204                                 STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
 205                         rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
 206                                 STMP_OFFSET_REG_CLR);
 207                 writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
 208                         rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
 209         }
 210         return 0;
 211 }
 212
 213 static int stmp3xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 214 {
 215         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 216
 217         rtc_time_to_tm(readl(rtc_data->io + STMP3XXX_RTC_ALARM), &alm->time);
 218         return 0;
 219 }
 220
 221 static int stmp3xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 222 {
 223         unsigned long t;
 224         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 225
 226         rtc_tm_to_time(&alm->time, &t);
 227         writel(t, rtc_data->io + STMP3XXX_RTC_ALARM);
 228
 229         stmp3xxx_alarm_irq_enable(dev, alm->enabled);
 230
 231         return 0;
 232 }
 233
 234 static const struct rtc_class_ops stmp3xxx_rtc_ops = {
 235         .alarm_irq_enable =
 236                           stmp3xxx_alarm_irq_enable,
 237         .read_time      = stmp3xxx_rtc_gettime,
 238         .set_mmss       = stmp3xxx_rtc_set_mmss,
 239         .read_alarm     = stmp3xxx_rtc_read_alarm,
 240         .set_alarm      = stmp3xxx_rtc_set_alarm,
 241 };
 242
 243 static int stmp3xxx_rtc_remove(struct platform_device *pdev)
 244 {
 245         struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(pdev);
 246
 247         if (!rtc_data)
 248                 return 0;
 249
 250         writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
 251                 rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
 252
 253         return 0;
 254 }
 255
 256 static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 257 {
 258         struct stmp3xxx_rtc_data *rtc_data;
 259         struct resource *r;
 260         u32 rtc_stat;
 261         u32 pers0_set, pers0_clr;
 262         u32 crystalfreq = 0;
 263         int err;
 264
 265         rtc_data = devm_kzalloc(&pdev->dev, sizeof(*rtc_data), GFP_KERNEL);
 266         if (!rtc_data)
 267                 return -ENOMEM;
 268
 269         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 270         if (!r) {
 271                 dev_err(&pdev->dev, "failed to get resource\n");
 272                 return -ENXIO;
 273         }
 274
 275         rtc_data->io = devm_ioremap(&pdev->dev, r->start, resource_size(r));
 276         if (!rtc_data->io) {
 277                 dev_err(&pdev->dev, "ioremap failed\n");
 278                 return -EIO;
 279         }
 280
 281         rtc_data->irq_alarm = platform_get_irq(pdev, 0);
 282
 283         rtc_stat = readl(rtc_data->io + STMP3XXX_RTC_STAT);
 284         if (!(rtc_stat & STMP3XXX_RTC_STAT_RTC_PRESENT)) {
 285                 dev_err(&pdev->dev, "no device onboard\n");
 286                 return -ENODEV;
 287         }
 288
 289         platform_set_drvdata(pdev, rtc_data);
 290
 291         err = stmp_reset_block(rtc_data->io);
 292         if (err) {
 293                 dev_err(&pdev->dev, "stmp_reset_block failed: %d\n", err);
 294                 return err;
 295         }
 296
 297         /*
 298          * Obviously the rtc needs a clock input to be able to run.
 299          * This clock can be provided by an external 32k crystal. If that one is
 300          * missing XTAL must not be disabled in suspend which consumes a
 301          * lot of power. Normally the presence and exact frequency (supported
 302          * are 32000 Hz and 32768 Hz) is detectable from fuses, but as reality
 303          * proves these fuses are not blown correctly on all machines, so the
 304          * frequency can be overridden in the device tree.
 305          */
 306         if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32000_PRESENT)
 307                 crystalfreq = 32000;
 308         else if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32768_PRESENT)
 309                 crystalfreq = 32768;
 310
 311         of_property_read_u32(pdev->dev.of_node, "stmp,crystal-freq",
 312                              &crystalfreq);
 313
 314         switch (crystalfreq) {
 315         case 32000:
 316                 /* keep 32kHz crystal running in low-power mode */
 317                 pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ |
 318                         STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
 319                         STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
 320                 pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
 321                 break;
 322         case 32768:
 323                 /* keep 32.768kHz crystal running in low-power mode */
 324                 pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
 325                         STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
 326                 pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP |
 327                         STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ;
 328                 break;
 329         default:
 330                 dev_warn(&pdev->dev,
 331                          "invalid crystal-freq specified in device-tree. Assuming no crystal\n");
 332                 /* fall-through */
 333         case 0:
 334                 /* keep XTAL on in low-power mode */
 335                 pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
 336                 pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
 337                         STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
 338         }
 339
 340         writel(pers0_set, rtc_data->io + STMP3XXX_RTC_PERSISTENT0 +
 341                         STMP_OFFSET_REG_SET);
 342
 343         writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 344                         STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 345                         STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE | pers0_clr,
 346                 rtc_data->io + STMP3XXX_RTC_PERSISTENT0 + STMP_OFFSET_REG_CLR);
 347
 348         writel(STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN |
 349                         STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
 350                 rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
 351
 352         rtc_data->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
 353                                 &stmp3xxx_rtc_ops, THIS_MODULE);
 354         if (IS_ERR(rtc_data->rtc))
 355                 return PTR_ERR(rtc_data->rtc);
 356
 357         err = devm_request_irq(&pdev->dev, rtc_data->irq_alarm,
 358                         stmp3xxx_rtc_interrupt, 0, "RTC alarm", &pdev->dev);
 359         if (err) {
 360                 dev_err(&pdev->dev, "Cannot claim IRQ%d\n",
 361                         rtc_data->irq_alarm);
 362                 return err;
 363         }
 364
 365         stmp3xxx_wdt_register(pdev);
 366         return 0;
 367 }
 368
 369 #ifdef CONFIG_PM_SLEEP
 370 static int stmp3xxx_rtc_suspend(struct device *dev)
 371 {
 372         return 0;
 373 }
 374
 375 static int stmp3xxx_rtc_resume(struct device *dev)
 376 {
 377         struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
 378
 379         stmp_reset_block(rtc_data->io);
 380         writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 381                         STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 382                         STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
 383                 rtc_data->io + STMP3XXX_RTC_PERSISTENT0 + STMP_OFFSET_REG_CLR);
 384         return 0;
 385 }
 386 #endif
 387
 388 static SIMPLE_DEV_PM_OPS(stmp3xxx_rtc_pm_ops, stmp3xxx_rtc_suspend,
 389                         stmp3xxx_rtc_resume);
 390
 391 static const struct of_device_id rtc_dt_ids[] = {
 392         { .compatible = "fsl,stmp3xxx-rtc", },
 393         { /* sentinel */ }
 394 };
 395 MODULE_DEVICE_TABLE(of, rtc_dt_ids);
 396
 397 static struct platform_driver stmp3xxx_rtcdrv = {
 398         .probe          = stmp3xxx_rtc_probe,
 399         .remove         = stmp3xxx_rtc_remove,
 400         .driver         = {
 401                 .name   = "stmp3xxx-rtc",
 402                 .pm     = &stmp3xxx_rtc_pm_ops,
 403                 .of_match_table = rtc_dt_ids,
 404         },
 405 };
 406
 407 module_platform_driver(stmp3xxx_rtcdrv);
 408
 409 MODULE_DESCRIPTION("STMP3xxx RTC Driver");
 410 MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com> and "
 411                 "Wolfram Sang <w.sang@pengutronix.de>");
 412 MODULE_LICENSE("GPL");