x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / scsi / device_handler / scsi_dh_rdac.c
blob2ceff585f1896d9762fd288a93f4bcfde0bf2623
1 /*
2 * LSI/Engenio/NetApp E-Series RDAC SCSI Device Handler
4 * Copyright (C) 2005 Mike Christie. All rights reserved.
5 * Copyright (C) Chandra Seetharaman, IBM Corp. 2007
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22 #include <scsi/scsi.h>
23 #include <scsi/scsi_eh.h>
24 #include <scsi/scsi_dh.h>
25 #include <linux/workqueue.h>
26 #include <linux/slab.h>
27 #include <linux/module.h>
29 #define RDAC_NAME "rdac"
30 #define RDAC_RETRY_COUNT 5
33 * LSI mode page stuff
35 * These struct definitions and the forming of the
36 * mode page were taken from the LSI RDAC 2.4 GPL'd
37 * driver, and then converted to Linux conventions.
39 #define RDAC_QUIESCENCE_TIME 20
41 * Page Codes
43 #define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c
46 * Controller modes definitions
48 #define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02
51 * RDAC Options field
53 #define RDAC_FORCED_QUIESENCE 0x02
55 #define RDAC_TIMEOUT (60 * HZ)
56 #define RDAC_RETRIES 3
58 struct rdac_mode_6_hdr {
59 u8 data_len;
60 u8 medium_type;
61 u8 device_params;
62 u8 block_desc_len;
65 struct rdac_mode_10_hdr {
66 u16 data_len;
67 u8 medium_type;
68 u8 device_params;
69 u16 reserved;
70 u16 block_desc_len;
73 struct rdac_mode_common {
74 u8 controller_serial[16];
75 u8 alt_controller_serial[16];
76 u8 rdac_mode[2];
77 u8 alt_rdac_mode[2];
78 u8 quiescence_timeout;
79 u8 rdac_options;
82 struct rdac_pg_legacy {
83 struct rdac_mode_6_hdr hdr;
84 u8 page_code;
85 u8 page_len;
86 struct rdac_mode_common common;
87 #define MODE6_MAX_LUN 32
88 u8 lun_table[MODE6_MAX_LUN];
89 u8 reserved2[32];
90 u8 reserved3;
91 u8 reserved4;
94 struct rdac_pg_expanded {
95 struct rdac_mode_10_hdr hdr;
96 u8 page_code;
97 u8 subpage_code;
98 u8 page_len[2];
99 struct rdac_mode_common common;
100 u8 lun_table[256];
101 u8 reserved3;
102 u8 reserved4;
105 struct c9_inquiry {
106 u8 peripheral_info;
107 u8 page_code; /* 0xC9 */
108 u8 reserved1;
109 u8 page_len;
110 u8 page_id[4]; /* "vace" */
111 u8 avte_cvp;
112 u8 path_prio;
113 u8 reserved2[38];
116 #define SUBSYS_ID_LEN 16
117 #define SLOT_ID_LEN 2
118 #define ARRAY_LABEL_LEN 31
120 struct c4_inquiry {
121 u8 peripheral_info;
122 u8 page_code; /* 0xC4 */
123 u8 reserved1;
124 u8 page_len;
125 u8 page_id[4]; /* "subs" */
126 u8 subsys_id[SUBSYS_ID_LEN];
127 u8 revision[4];
128 u8 slot_id[SLOT_ID_LEN];
129 u8 reserved[2];
132 #define UNIQUE_ID_LEN 16
133 struct c8_inquiry {
134 u8 peripheral_info;
135 u8 page_code; /* 0xC8 */
136 u8 reserved1;
137 u8 page_len;
138 u8 page_id[4]; /* "edid" */
139 u8 reserved2[3];
140 u8 vol_uniq_id_len;
141 u8 vol_uniq_id[16];
142 u8 vol_user_label_len;
143 u8 vol_user_label[60];
144 u8 array_uniq_id_len;
145 u8 array_unique_id[UNIQUE_ID_LEN];
146 u8 array_user_label_len;
147 u8 array_user_label[60];
148 u8 lun[8];
151 struct rdac_controller {
152 u8 array_id[UNIQUE_ID_LEN];
153 int use_ms10;
154 struct kref kref;
155 struct list_head node; /* list of all controllers */
156 union {
157 struct rdac_pg_legacy legacy;
158 struct rdac_pg_expanded expanded;
159 } mode_select;
160 u8 index;
161 u8 array_name[ARRAY_LABEL_LEN];
162 struct Scsi_Host *host;
163 spinlock_t ms_lock;
164 int ms_queued;
165 struct work_struct ms_work;
166 struct scsi_device *ms_sdev;
167 struct list_head ms_head;
168 struct list_head dh_list;
171 struct c2_inquiry {
172 u8 peripheral_info;
173 u8 page_code; /* 0xC2 */
174 u8 reserved1;
175 u8 page_len;
176 u8 page_id[4]; /* "swr4" */
177 u8 sw_version[3];
178 u8 sw_date[3];
179 u8 features_enabled;
180 u8 max_lun_supported;
181 u8 partitions[239]; /* Total allocation length should be 0xFF */
184 struct rdac_dh_data {
185 struct list_head node;
186 struct rdac_controller *ctlr;
187 struct scsi_device *sdev;
188 #define UNINITIALIZED_LUN (1 << 8)
189 unsigned lun;
191 #define RDAC_MODE 0
192 #define RDAC_MODE_AVT 1
193 #define RDAC_MODE_IOSHIP 2
194 unsigned char mode;
196 #define RDAC_STATE_ACTIVE 0
197 #define RDAC_STATE_PASSIVE 1
198 unsigned char state;
200 #define RDAC_LUN_UNOWNED 0
201 #define RDAC_LUN_OWNED 1
202 char lun_state;
204 #define RDAC_PREFERRED 0
205 #define RDAC_NON_PREFERRED 1
206 char preferred;
208 union {
209 struct c2_inquiry c2;
210 struct c4_inquiry c4;
211 struct c8_inquiry c8;
212 struct c9_inquiry c9;
213 } inq;
216 static const char *mode[] = {
217 "RDAC",
218 "AVT",
219 "IOSHIP",
221 static const char *lun_state[] =
223 "unowned",
224 "owned",
227 struct rdac_queue_data {
228 struct list_head entry;
229 struct rdac_dh_data *h;
230 activate_complete callback_fn;
231 void *callback_data;
234 static LIST_HEAD(ctlr_list);
235 static DEFINE_SPINLOCK(list_lock);
236 static struct workqueue_struct *kmpath_rdacd;
237 static void send_mode_select(struct work_struct *work);
240 * module parameter to enable rdac debug logging.
241 * 2 bits for each type of logging, only two types defined for now
242 * Can be enhanced if required at later point
244 static int rdac_logging = 1;
245 module_param(rdac_logging, int, S_IRUGO|S_IWUSR);
246 MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, "
247 "Default is 1 - failover logging enabled, "
248 "set it to 0xF to enable all the logs");
250 #define RDAC_LOG_FAILOVER 0
251 #define RDAC_LOG_SENSE 2
253 #define RDAC_LOG_BITS 2
255 #define RDAC_LOG_LEVEL(SHIFT) \
256 ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1))
258 #define RDAC_LOG(SHIFT, sdev, f, arg...) \
259 do { \
260 if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \
261 sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \
262 } while (0);
264 static unsigned int rdac_failover_get(struct rdac_controller *ctlr,
265 struct list_head *list,
266 unsigned char *cdb)
268 struct rdac_mode_common *common;
269 unsigned data_size;
270 struct rdac_queue_data *qdata;
271 u8 *lun_table;
273 if (ctlr->use_ms10) {
274 struct rdac_pg_expanded *rdac_pg;
276 data_size = sizeof(struct rdac_pg_expanded);
277 rdac_pg = &ctlr->mode_select.expanded;
278 memset(rdac_pg, 0, data_size);
279 common = &rdac_pg->common;
280 rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40;
281 rdac_pg->subpage_code = 0x1;
282 rdac_pg->page_len[0] = 0x01;
283 rdac_pg->page_len[1] = 0x28;
284 lun_table = rdac_pg->lun_table;
285 } else {
286 struct rdac_pg_legacy *rdac_pg;
288 data_size = sizeof(struct rdac_pg_legacy);
289 rdac_pg = &ctlr->mode_select.legacy;
290 memset(rdac_pg, 0, data_size);
291 common = &rdac_pg->common;
292 rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER;
293 rdac_pg->page_len = 0x68;
294 lun_table = rdac_pg->lun_table;
296 common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS;
297 common->quiescence_timeout = RDAC_QUIESCENCE_TIME;
298 common->rdac_options = RDAC_FORCED_QUIESENCE;
300 list_for_each_entry(qdata, list, entry) {
301 lun_table[qdata->h->lun] = 0x81;
304 /* Prepare the command. */
305 if (ctlr->use_ms10) {
306 cdb[0] = MODE_SELECT_10;
307 cdb[7] = data_size >> 8;
308 cdb[8] = data_size & 0xff;
309 } else {
310 cdb[0] = MODE_SELECT;
311 cdb[4] = data_size;
314 return data_size;
317 static void release_controller(struct kref *kref)
319 struct rdac_controller *ctlr;
320 ctlr = container_of(kref, struct rdac_controller, kref);
322 list_del(&ctlr->node);
323 kfree(ctlr);
326 static struct rdac_controller *get_controller(int index, char *array_name,
327 u8 *array_id, struct scsi_device *sdev)
329 struct rdac_controller *ctlr, *tmp;
331 list_for_each_entry(tmp, &ctlr_list, node) {
332 if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
333 (tmp->index == index) &&
334 (tmp->host == sdev->host)) {
335 kref_get(&tmp->kref);
336 return tmp;
339 ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
340 if (!ctlr)
341 return NULL;
343 /* initialize fields of controller */
344 memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
345 ctlr->index = index;
346 ctlr->host = sdev->host;
347 memcpy(ctlr->array_name, array_name, ARRAY_LABEL_LEN);
349 kref_init(&ctlr->kref);
350 ctlr->use_ms10 = -1;
351 ctlr->ms_queued = 0;
352 ctlr->ms_sdev = NULL;
353 spin_lock_init(&ctlr->ms_lock);
354 INIT_WORK(&ctlr->ms_work, send_mode_select);
355 INIT_LIST_HEAD(&ctlr->ms_head);
356 list_add(&ctlr->node, &ctlr_list);
357 INIT_LIST_HEAD(&ctlr->dh_list);
359 return ctlr;
362 static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h,
363 char *array_name, u8 *array_id)
365 int err = SCSI_DH_IO, i;
366 struct c8_inquiry *inqp = &h->inq.c8;
368 if (!scsi_get_vpd_page(sdev, 0xC8, (unsigned char *)inqp,
369 sizeof(struct c8_inquiry))) {
370 if (inqp->page_code != 0xc8)
371 return SCSI_DH_NOSYS;
372 if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
373 inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
374 return SCSI_DH_NOSYS;
375 h->lun = inqp->lun[7]; /* Uses only the last byte */
377 for(i=0; i<ARRAY_LABEL_LEN-1; ++i)
378 *(array_name+i) = inqp->array_user_label[(2*i)+1];
380 *(array_name+ARRAY_LABEL_LEN-1) = '\0';
381 memset(array_id, 0, UNIQUE_ID_LEN);
382 memcpy(array_id, inqp->array_unique_id, inqp->array_uniq_id_len);
383 err = SCSI_DH_OK;
385 return err;
388 static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
390 int err = SCSI_DH_IO, access_state;
391 struct rdac_dh_data *tmp;
392 struct c9_inquiry *inqp = &h->inq.c9;
394 h->state = RDAC_STATE_ACTIVE;
395 if (!scsi_get_vpd_page(sdev, 0xC9, (unsigned char *)inqp,
396 sizeof(struct c9_inquiry))) {
397 /* detect the operating mode */
398 if ((inqp->avte_cvp >> 5) & 0x1)
399 h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */
400 else if (inqp->avte_cvp >> 7)
401 h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */
402 else
403 h->mode = RDAC_MODE; /* LUN in RDAC mode */
405 /* Update ownership */
406 if (inqp->avte_cvp & 0x1) {
407 h->lun_state = RDAC_LUN_OWNED;
408 access_state = SCSI_ACCESS_STATE_OPTIMAL;
409 } else {
410 h->lun_state = RDAC_LUN_UNOWNED;
411 if (h->mode == RDAC_MODE) {
412 h->state = RDAC_STATE_PASSIVE;
413 access_state = SCSI_ACCESS_STATE_STANDBY;
414 } else
415 access_state = SCSI_ACCESS_STATE_ACTIVE;
418 /* Update path prio*/
419 if (inqp->path_prio & 0x1) {
420 h->preferred = RDAC_PREFERRED;
421 access_state |= SCSI_ACCESS_STATE_PREFERRED;
422 } else
423 h->preferred = RDAC_NON_PREFERRED;
424 rcu_read_lock();
425 list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) {
426 /* h->sdev should always be valid */
427 BUG_ON(!tmp->sdev);
428 tmp->sdev->access_state = access_state;
430 rcu_read_unlock();
431 err = SCSI_DH_OK;
434 return err;
437 static int initialize_controller(struct scsi_device *sdev,
438 struct rdac_dh_data *h, char *array_name, u8 *array_id)
440 int err = SCSI_DH_IO, index;
441 struct c4_inquiry *inqp = &h->inq.c4;
443 if (!scsi_get_vpd_page(sdev, 0xC4, (unsigned char *)inqp,
444 sizeof(struct c4_inquiry))) {
445 /* get the controller index */
446 if (inqp->slot_id[1] == 0x31)
447 index = 0;
448 else
449 index = 1;
451 spin_lock(&list_lock);
452 h->ctlr = get_controller(index, array_name, array_id, sdev);
453 if (!h->ctlr)
454 err = SCSI_DH_RES_TEMP_UNAVAIL;
455 else {
456 list_add_rcu(&h->node, &h->ctlr->dh_list);
457 h->sdev = sdev;
459 spin_unlock(&list_lock);
460 err = SCSI_DH_OK;
462 return err;
465 static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
467 int err = SCSI_DH_IO;
468 struct c2_inquiry *inqp = &h->inq.c2;
470 if (!scsi_get_vpd_page(sdev, 0xC2, (unsigned char *)inqp,
471 sizeof(struct c2_inquiry))) {
473 * If more than MODE6_MAX_LUN luns are supported, use
474 * mode select 10
476 if (inqp->max_lun_supported >= MODE6_MAX_LUN)
477 h->ctlr->use_ms10 = 1;
478 else
479 h->ctlr->use_ms10 = 0;
480 err = SCSI_DH_OK;
482 return err;
485 static int mode_select_handle_sense(struct scsi_device *sdev,
486 struct scsi_sense_hdr *sense_hdr)
488 int err = SCSI_DH_IO;
489 struct rdac_dh_data *h = sdev->handler_data;
491 if (!scsi_sense_valid(sense_hdr))
492 goto done;
494 switch (sense_hdr->sense_key) {
495 case NO_SENSE:
496 case ABORTED_COMMAND:
497 case UNIT_ATTENTION:
498 err = SCSI_DH_RETRY;
499 break;
500 case NOT_READY:
501 if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
502 /* LUN Not Ready and is in the Process of Becoming
503 * Ready
505 err = SCSI_DH_RETRY;
506 break;
507 case ILLEGAL_REQUEST:
508 if (sense_hdr->asc == 0x91 && sense_hdr->ascq == 0x36)
510 * Command Lock contention
512 err = SCSI_DH_IMM_RETRY;
513 break;
514 default:
515 break;
518 RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
519 "MODE_SELECT returned with sense %02x/%02x/%02x",
520 (char *) h->ctlr->array_name, h->ctlr->index,
521 sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
523 done:
524 return err;
527 static void send_mode_select(struct work_struct *work)
529 struct rdac_controller *ctlr =
530 container_of(work, struct rdac_controller, ms_work);
531 struct scsi_device *sdev = ctlr->ms_sdev;
532 struct rdac_dh_data *h = sdev->handler_data;
533 int err = SCSI_DH_OK, retry_cnt = RDAC_RETRY_COUNT;
534 struct rdac_queue_data *tmp, *qdata;
535 LIST_HEAD(list);
536 unsigned char cdb[COMMAND_SIZE(MODE_SELECT_10)];
537 struct scsi_sense_hdr sshdr;
538 unsigned int data_size;
539 u64 req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
540 REQ_FAILFAST_DRIVER;
542 spin_lock(&ctlr->ms_lock);
543 list_splice_init(&ctlr->ms_head, &list);
544 ctlr->ms_queued = 0;
545 ctlr->ms_sdev = NULL;
546 spin_unlock(&ctlr->ms_lock);
548 retry:
549 data_size = rdac_failover_get(ctlr, &list, cdb);
551 RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
552 "%s MODE_SELECT command",
553 (char *) h->ctlr->array_name, h->ctlr->index,
554 (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
556 if (scsi_execute(sdev, cdb, DMA_TO_DEVICE, &h->ctlr->mode_select,
557 data_size, NULL, &sshdr, RDAC_TIMEOUT * HZ,
558 RDAC_RETRIES, req_flags, 0, NULL)) {
559 err = mode_select_handle_sense(sdev, &sshdr);
560 if (err == SCSI_DH_RETRY && retry_cnt--)
561 goto retry;
562 if (err == SCSI_DH_IMM_RETRY)
563 goto retry;
565 if (err == SCSI_DH_OK) {
566 h->state = RDAC_STATE_ACTIVE;
567 RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
568 "MODE_SELECT completed",
569 (char *) h->ctlr->array_name, h->ctlr->index);
572 list_for_each_entry_safe(qdata, tmp, &list, entry) {
573 list_del(&qdata->entry);
574 if (err == SCSI_DH_OK)
575 qdata->h->state = RDAC_STATE_ACTIVE;
576 if (qdata->callback_fn)
577 qdata->callback_fn(qdata->callback_data, err);
578 kfree(qdata);
580 return;
583 static int queue_mode_select(struct scsi_device *sdev,
584 activate_complete fn, void *data)
586 struct rdac_queue_data *qdata;
587 struct rdac_controller *ctlr;
589 qdata = kzalloc(sizeof(*qdata), GFP_KERNEL);
590 if (!qdata)
591 return SCSI_DH_RETRY;
593 qdata->h = sdev->handler_data;
594 qdata->callback_fn = fn;
595 qdata->callback_data = data;
597 ctlr = qdata->h->ctlr;
598 spin_lock(&ctlr->ms_lock);
599 list_add_tail(&qdata->entry, &ctlr->ms_head);
600 if (!ctlr->ms_queued) {
601 ctlr->ms_queued = 1;
602 ctlr->ms_sdev = sdev;
603 queue_work(kmpath_rdacd, &ctlr->ms_work);
605 spin_unlock(&ctlr->ms_lock);
606 return SCSI_DH_OK;
609 static int rdac_activate(struct scsi_device *sdev,
610 activate_complete fn, void *data)
612 struct rdac_dh_data *h = sdev->handler_data;
613 int err = SCSI_DH_OK;
614 int act = 0;
616 err = check_ownership(sdev, h);
617 if (err != SCSI_DH_OK)
618 goto done;
620 switch (h->mode) {
621 case RDAC_MODE:
622 if (h->lun_state == RDAC_LUN_UNOWNED)
623 act = 1;
624 break;
625 case RDAC_MODE_IOSHIP:
626 if ((h->lun_state == RDAC_LUN_UNOWNED) &&
627 (h->preferred == RDAC_PREFERRED))
628 act = 1;
629 break;
630 default:
631 break;
634 if (act) {
635 err = queue_mode_select(sdev, fn, data);
636 if (err == SCSI_DH_OK)
637 return 0;
639 done:
640 if (fn)
641 fn(data, err);
642 return 0;
645 static int rdac_prep_fn(struct scsi_device *sdev, struct request *req)
647 struct rdac_dh_data *h = sdev->handler_data;
648 int ret = BLKPREP_OK;
650 if (h->state != RDAC_STATE_ACTIVE) {
651 ret = BLKPREP_KILL;
652 req->rq_flags |= RQF_QUIET;
654 return ret;
658 static int rdac_check_sense(struct scsi_device *sdev,
659 struct scsi_sense_hdr *sense_hdr)
661 struct rdac_dh_data *h = sdev->handler_data;
663 RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, "
664 "I/O returned with sense %02x/%02x/%02x",
665 (char *) h->ctlr->array_name, h->ctlr->index,
666 sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
668 switch (sense_hdr->sense_key) {
669 case NOT_READY:
670 if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
671 /* LUN Not Ready - Logical Unit Not Ready and is in
672 * the process of becoming ready
673 * Just retry.
675 return ADD_TO_MLQUEUE;
676 if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
677 /* LUN Not Ready - Storage firmware incompatible
678 * Manual code synchonisation required.
680 * Nothing we can do here. Try to bypass the path.
682 return SUCCESS;
683 if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1)
684 /* LUN Not Ready - Quiescense in progress
686 * Just retry and wait.
688 return ADD_TO_MLQUEUE;
689 if (sense_hdr->asc == 0xA1 && sense_hdr->ascq == 0x02)
690 /* LUN Not Ready - Quiescense in progress
691 * or has been achieved
692 * Just retry.
694 return ADD_TO_MLQUEUE;
695 break;
696 case ILLEGAL_REQUEST:
697 if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
698 /* Invalid Request - Current Logical Unit Ownership.
699 * Controller is not the current owner of the LUN,
700 * Fail the path, so that the other path be used.
702 h->state = RDAC_STATE_PASSIVE;
703 return SUCCESS;
705 break;
706 case UNIT_ATTENTION:
707 if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
709 * Power On, Reset, or Bus Device Reset, just retry.
711 return ADD_TO_MLQUEUE;
712 if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02)
714 * Quiescence in progress , just retry.
716 return ADD_TO_MLQUEUE;
717 break;
719 /* success just means we do not care what scsi-ml does */
720 return SCSI_RETURN_NOT_HANDLED;
723 static int rdac_bus_attach(struct scsi_device *sdev)
725 struct rdac_dh_data *h;
726 int err;
727 char array_name[ARRAY_LABEL_LEN];
728 char array_id[UNIQUE_ID_LEN];
730 h = kzalloc(sizeof(*h) , GFP_KERNEL);
731 if (!h)
732 return -ENOMEM;
733 h->lun = UNINITIALIZED_LUN;
734 h->state = RDAC_STATE_ACTIVE;
736 err = get_lun_info(sdev, h, array_name, array_id);
737 if (err != SCSI_DH_OK)
738 goto failed;
740 err = initialize_controller(sdev, h, array_name, array_id);
741 if (err != SCSI_DH_OK)
742 goto failed;
744 err = check_ownership(sdev, h);
745 if (err != SCSI_DH_OK)
746 goto clean_ctlr;
748 err = set_mode_select(sdev, h);
749 if (err != SCSI_DH_OK)
750 goto clean_ctlr;
752 sdev_printk(KERN_NOTICE, sdev,
753 "%s: LUN %d (%s) (%s)\n",
754 RDAC_NAME, h->lun, mode[(int)h->mode],
755 lun_state[(int)h->lun_state]);
757 sdev->handler_data = h;
758 return 0;
760 clean_ctlr:
761 spin_lock(&list_lock);
762 kref_put(&h->ctlr->kref, release_controller);
763 spin_unlock(&list_lock);
765 failed:
766 kfree(h);
767 return -EINVAL;
770 static void rdac_bus_detach( struct scsi_device *sdev )
772 struct rdac_dh_data *h = sdev->handler_data;
774 if (h->ctlr && h->ctlr->ms_queued)
775 flush_workqueue(kmpath_rdacd);
777 spin_lock(&list_lock);
778 if (h->ctlr) {
779 list_del_rcu(&h->node);
780 h->sdev = NULL;
781 kref_put(&h->ctlr->kref, release_controller);
783 spin_unlock(&list_lock);
784 sdev->handler_data = NULL;
785 kfree(h);
788 static struct scsi_device_handler rdac_dh = {
789 .name = RDAC_NAME,
790 .module = THIS_MODULE,
791 .prep_fn = rdac_prep_fn,
792 .check_sense = rdac_check_sense,
793 .attach = rdac_bus_attach,
794 .detach = rdac_bus_detach,
795 .activate = rdac_activate,
798 static int __init rdac_init(void)
800 int r;
802 r = scsi_register_device_handler(&rdac_dh);
803 if (r != 0) {
804 printk(KERN_ERR "Failed to register scsi device handler.");
805 goto done;
809 * Create workqueue to handle mode selects for rdac
811 kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd");
812 if (!kmpath_rdacd) {
813 scsi_unregister_device_handler(&rdac_dh);
814 printk(KERN_ERR "kmpath_rdacd creation failed.\n");
816 r = -EINVAL;
818 done:
819 return r;
822 static void __exit rdac_exit(void)
824 destroy_workqueue(kmpath_rdacd);
825 scsi_unregister_device_handler(&rdac_dh);
828 module_init(rdac_init);
829 module_exit(rdac_exit);
831 MODULE_DESCRIPTION("Multipath LSI/Engenio/NetApp E-Series RDAC driver");
832 MODULE_AUTHOR("Mike Christie, Chandra Seetharaman");
833 MODULE_VERSION("01.00.0000.0000");
834 MODULE_LICENSE("GPL");