drivers/thunderbolt/switch.c

   1 /*
   2  * Thunderbolt Cactus Ridge driver - switch/port utility functions
   3  *
   4  * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
   5  */
   6
   7 #include <linux/delay.h>
   8 #include <linux/slab.h>
   9
  10 #include "tb.h"
  11
  12 /* port utility functions */
  13
  14 static const char *tb_port_type(struct tb_regs_port_header *port)
  15 {
  16         switch (port->type >> 16) {
  17         case 0:
  18                 switch ((u8) port->type) {
  19                 case 0:
  20                         return "Inactive";
  21                 case 1:
  22                         return "Port";
  23                 case 2:
  24                         return "NHI";
  25                 default:
  26                         return "unknown";
  27                 }
  28         case 0x2:
  29                 return "Ethernet";
  30         case 0x8:
  31                 return "SATA";
  32         case 0xe:
  33                 return "DP/HDMI";
  34         case 0x10:
  35                 return "PCIe";
  36         case 0x20:
  37                 return "USB";
  38         default:
  39                 return "unknown";
  40         }
  41 }
  42
  43 static void tb_dump_port(struct tb *tb, struct tb_regs_port_header *port)
  44 {
  45         tb_info(tb,
  46                 " Port %d: %x:%x (Revision: %d, TB Version: %d, Type: %s (%#x))\n",
  47                 port->port_number, port->vendor_id, port->device_id,
  48                 port->revision, port->thunderbolt_version, tb_port_type(port),
  49                 port->type);
  50         tb_info(tb, "  Max hop id (in/out): %d/%d\n",
  51                 port->max_in_hop_id, port->max_out_hop_id);
  52         tb_info(tb, "  Max counters: %d\n", port->max_counters);
  53         tb_info(tb, "  NFC Credits: %#x\n", port->nfc_credits);
  54 }
  55
  56 /**
  57  * tb_port_state() - get connectedness state of a port
  58  *
  59  * The port must have a TB_CAP_PHY (i.e. it should be a real port).
  60  *
  61  * Return: Returns an enum tb_port_state on success or an error code on failure.
  62  */
  63 static int tb_port_state(struct tb_port *port)
  64 {
  65         struct tb_cap_phy phy;
  66         int res;
  67         if (port->cap_phy == 0) {
  68                 tb_port_WARN(port, "does not have a PHY\n");
  69                 return -EINVAL;
  70         }
  71         res = tb_port_read(port, &phy, TB_CFG_PORT, port->cap_phy, 2);
  72         if (res)
  73                 return res;
  74         return phy.state;
  75 }
  76
  77 /**
  78  * tb_wait_for_port() - wait for a port to become ready
  79  *
  80  * Wait up to 1 second for a port to reach state TB_PORT_UP. If
  81  * wait_if_unplugged is set then we also wait if the port is in state
  82  * TB_PORT_UNPLUGGED (it takes a while for the device to be registered after
  83  * switch resume). Otherwise we only wait if a device is registered but the link
  84  * has not yet been established.
  85  *
  86  * Return: Returns an error code on failure. Returns 0 if the port is not
  87  * connected or failed to reach state TB_PORT_UP within one second. Returns 1
  88  * if the port is connected and in state TB_PORT_UP.
  89  */
  90 int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged)
  91 {
  92         int retries = 10;
  93         int state;
  94         if (!port->cap_phy) {
  95                 tb_port_WARN(port, "does not have PHY\n");
  96                 return -EINVAL;
  97         }
  98         if (tb_is_upstream_port(port)) {
  99                 tb_port_WARN(port, "is the upstream port\n");
 100                 return -EINVAL;
 101         }
 102
 103         while (retries--) {
 104                 state = tb_port_state(port);
 105                 if (state < 0)
 106                         return state;
 107                 if (state == TB_PORT_DISABLED) {
 108                         tb_port_info(port, "is disabled (state: 0)\n");
 109                         return 0;
 110                 }
 111                 if (state == TB_PORT_UNPLUGGED) {
 112                         if (wait_if_unplugged) {
 113                                 /* used during resume */
 114                                 tb_port_info(port,
 115                                              "is unplugged (state: 7), retrying...\n");
 116                                 msleep(100);
 117                                 continue;
 118                         }
 119                         tb_port_info(port, "is unplugged (state: 7)\n");
 120                         return 0;
 121                 }
 122                 if (state == TB_PORT_UP) {
 123                         tb_port_info(port,
 124                                      "is connected, link is up (state: 2)\n");
 125                         return 1;
 126                 }
 127
 128                 /*
 129                  * After plug-in the state is TB_PORT_CONNECTING. Give it some
 130                  * time.
 131                  */
 132                 tb_port_info(port,
 133                              "is connected, link is not up (state: %d), retrying...\n",
 134                              state);
 135                 msleep(100);
 136         }
 137         tb_port_warn(port,
 138                      "failed to reach state TB_PORT_UP. Ignoring port...\n");
 139         return 0;
 140 }
 141
 142 /**
 143  * tb_port_add_nfc_credits() - add/remove non flow controlled credits to port
 144  *
 145  * Change the number of NFC credits allocated to @port by @credits. To remove
 146  * NFC credits pass a negative amount of credits.
 147  *
 148  * Return: Returns 0 on success or an error code on failure.
 149  */
 150 int tb_port_add_nfc_credits(struct tb_port *port, int credits)
 151 {
 152         if (credits == 0)
 153                 return 0;
 154         tb_port_info(port,
 155                      "adding %#x NFC credits (%#x -> %#x)",
 156                      credits,
 157                      port->config.nfc_credits,
 158                      port->config.nfc_credits + credits);
 159         port->config.nfc_credits += credits;
 160         return tb_port_write(port, &port->config.nfc_credits,
 161                              TB_CFG_PORT, 4, 1);
 162 }
 163
 164 /**
 165  * tb_port_clear_counter() - clear a counter in TB_CFG_COUNTER
 166  *
 167  * Return: Returns 0 on success or an error code on failure.
 168  */
 169 int tb_port_clear_counter(struct tb_port *port, int counter)
 170 {
 171         u32 zero[3] = { 0, 0, 0 };
 172         tb_port_info(port, "clearing counter %d\n", counter);
 173         return tb_port_write(port, zero, TB_CFG_COUNTERS, 3 * counter, 3);
 174 }
 175
 176 /**
 177  * tb_init_port() - initialize a port
 178  *
 179  * This is a helper method for tb_switch_alloc. Does not check or initialize
 180  * any downstream switches.
 181  *
 182  * Return: Returns 0 on success or an error code on failure.
 183  */
 184 static int tb_init_port(struct tb_port *port)
 185 {
 186         int res;
 187         int cap;
 188
 189         res = tb_port_read(port, &port->config, TB_CFG_PORT, 0, 8);
 190         if (res)
 191                 return res;
 192
 193         /* Port 0 is the switch itself and has no PHY. */
 194         if (port->config.type == TB_TYPE_PORT && port->port != 0) {
 195                 cap = tb_find_cap(port, TB_CFG_PORT, TB_CAP_PHY);
 196
 197                 if (cap > 0)
 198                         port->cap_phy = cap;
 199                 else
 200                         tb_port_WARN(port, "non switch port without a PHY\n");
 201         }
 202
 203         tb_dump_port(port->sw->tb, &port->config);
 204
 205         /* TODO: Read dual link port, DP port and more from EEPROM. */
 206         return 0;
 207
 208 }
 209
 210 /* switch utility functions */
 211
 212 static void tb_dump_switch(struct tb *tb, struct tb_regs_switch_header *sw)
 213 {
 214         tb_info(tb,
 215                 " Switch: %x:%x (Revision: %d, TB Version: %d)\n",
 216                 sw->vendor_id, sw->device_id, sw->revision,
 217                 sw->thunderbolt_version);
 218         tb_info(tb, "  Max Port Number: %d\n", sw->max_port_number);
 219         tb_info(tb, "  Config:\n");
 220         tb_info(tb,
 221                 "   Upstream Port Number: %d Depth: %d Route String: %#llx Enabled: %d, PlugEventsDelay: %dms\n",
 222                 sw->upstream_port_number, sw->depth,
 223                 (((u64) sw->route_hi) << 32) | sw->route_lo,
 224                 sw->enabled, sw->plug_events_delay);
 225         tb_info(tb,
 226                 "   unknown1: %#x unknown4: %#x\n",
 227                 sw->__unknown1, sw->__unknown4);
 228 }
 229
 230 /**
 231  * reset_switch() - reconfigure route, enable and send TB_CFG_PKG_RESET
 232  *
 233  * Return: Returns 0 on success or an error code on failure.
 234  */
 235 int tb_switch_reset(struct tb *tb, u64 route)
 236 {
 237         struct tb_cfg_result res;
 238         struct tb_regs_switch_header header = {
 239                 header.route_hi = route >> 32,
 240                 header.route_lo = route,
 241                 header.enabled = true,
 242         };
 243         tb_info(tb, "resetting switch at %llx\n", route);
 244         res.err = tb_cfg_write(tb->ctl, ((u32 *) &header) + 2, route,
 245                         0, 2, 2, 2);
 246         if (res.err)
 247                 return res.err;
 248         res = tb_cfg_reset(tb->ctl, route, TB_CFG_DEFAULT_TIMEOUT);
 249         if (res.err > 0)
 250                 return -EIO;
 251         return res.err;
 252 }
 253
 254 struct tb_switch *get_switch_at_route(struct tb_switch *sw, u64 route)
 255 {
 256         u8 next_port = route; /*
 257                                * Routes use a stride of 8 bits,
 258                                * eventhough a port index has 6 bits at most.
 259                                * */
 260         if (route == 0)
 261                 return sw;
 262         if (next_port > sw->config.max_port_number)
 263                 return NULL;
 264         if (tb_is_upstream_port(&sw->ports[next_port]))
 265                 return NULL;
 266         if (!sw->ports[next_port].remote)
 267                 return NULL;
 268         return get_switch_at_route(sw->ports[next_port].remote->sw,
 269                                    route >> TB_ROUTE_SHIFT);
 270 }
 271
 272 /**
 273  * tb_plug_events_active() - enable/disable plug events on a switch
 274  *
 275  * Also configures a sane plug_events_delay of 255ms.
 276  *
 277  * Return: Returns 0 on success or an error code on failure.
 278  */
 279 static int tb_plug_events_active(struct tb_switch *sw, bool active)
 280 {
 281         u32 data;
 282         int res;
 283
 284         sw->config.plug_events_delay = 0xff;
 285         res = tb_sw_write(sw, ((u32 *) &sw->config) + 4, TB_CFG_SWITCH, 4, 1);
 286         if (res)
 287                 return res;
 288
 289         res = tb_sw_read(sw, &data, TB_CFG_SWITCH, sw->cap_plug_events + 1, 1);
 290         if (res)
 291                 return res;
 292
 293         if (active) {
 294                 data = data & 0xFFFFFF83;
 295                 switch (sw->config.device_id) {
 296                 case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE:
 297                 case PCI_DEVICE_ID_INTEL_EAGLE_RIDGE:
 298                 case PCI_DEVICE_ID_INTEL_PORT_RIDGE:
 299                         break;
 300                 default:
 301                         data |= 4;
 302                 }
 303         } else {
 304                 data = data | 0x7c;
 305         }
 306         return tb_sw_write(sw, &data, TB_CFG_SWITCH,
 307                            sw->cap_plug_events + 1, 1);
 308 }
 309
 310
 311 /**
 312  * tb_switch_free() - free a tb_switch and all downstream switches
 313  */
 314 void tb_switch_free(struct tb_switch *sw)
 315 {
 316         int i;
 317         /* port 0 is the switch itself and never has a remote */
 318         for (i = 1; i <= sw->config.max_port_number; i++) {
 319                 if (tb_is_upstream_port(&sw->ports[i]))
 320                         continue;
 321                 if (sw->ports[i].remote)
 322                         tb_switch_free(sw->ports[i].remote->sw);
 323                 sw->ports[i].remote = NULL;
 324         }
 325
 326         if (!sw->is_unplugged)
 327                 tb_plug_events_active(sw, false);
 328
 329         kfree(sw->ports);
 330         kfree(sw->drom);
 331         kfree(sw);
 332 }
 333
 334 /**
 335  * tb_switch_alloc() - allocate and initialize a switch
 336  *
 337  * Return: Returns a NULL on failure.
 338  */
 339 struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route)
 340 {
 341         int i;
 342         int cap;
 343         struct tb_switch *sw;
 344         int upstream_port = tb_cfg_get_upstream_port(tb->ctl, route);
 345         if (upstream_port < 0)
 346                 return NULL;
 347
 348         sw = kzalloc(sizeof(*sw), GFP_KERNEL);
 349         if (!sw)
 350                 return NULL;
 351
 352         sw->tb = tb;
 353         if (tb_cfg_read(tb->ctl, &sw->config, route, 0, TB_CFG_SWITCH, 0, 5))
 354                 goto err;
 355         tb_info(tb,
 356                 "initializing Switch at %#llx (depth: %d, up port: %d)\n",
 357                 route, tb_route_length(route), upstream_port);
 358         tb_info(tb, "old switch config:\n");
 359         tb_dump_switch(tb, &sw->config);
 360
 361         /* configure switch */
 362         sw->config.upstream_port_number = upstream_port;
 363         sw->config.depth = tb_route_length(route);
 364         sw->config.route_lo = route;
 365         sw->config.route_hi = route >> 32;
 366         sw->config.enabled = 1;
 367         /* from here on we may use the tb_sw_* functions & macros */
 368
 369         if (sw->config.vendor_id != 0x8086)
 370                 tb_sw_warn(sw, "unknown switch vendor id %#x\n",
 371                            sw->config.vendor_id);
 372
 373         if (sw->config.device_id != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE &&
 374             sw->config.device_id != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C &&
 375             sw->config.device_id != PCI_DEVICE_ID_INTEL_PORT_RIDGE &&
 376             sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE &&
 377             sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE)
 378                 tb_sw_warn(sw, "unsupported switch device id %#x\n",
 379                            sw->config.device_id);
 380
 381         /* upload configuration */
 382         if (tb_sw_write(sw, 1 + (u32 *) &sw->config, TB_CFG_SWITCH, 1, 3))
 383                 goto err;
 384
 385         /* initialize ports */
 386         sw->ports = kcalloc(sw->config.max_port_number + 1, sizeof(*sw->ports),
 387                                 GFP_KERNEL);
 388         if (!sw->ports)
 389                 goto err;
 390
 391         for (i = 0; i <= sw->config.max_port_number; i++) {
 392                 /* minimum setup for tb_find_cap and tb_drom_read to work */
 393                 sw->ports[i].sw = sw;
 394                 sw->ports[i].port = i;
 395         }
 396
 397         cap = tb_find_cap(&sw->ports[0], TB_CFG_SWITCH, TB_CAP_PLUG_EVENTS);
 398         if (cap < 0) {
 399                 tb_sw_warn(sw, "cannot find TB_CAP_PLUG_EVENTS aborting\n");
 400                 goto err;
 401         }
 402         sw->cap_plug_events = cap;
 403
 404         /* read drom */
 405         if (tb_drom_read(sw))
 406                 tb_sw_warn(sw, "tb_eeprom_read_rom failed, continuing\n");
 407         tb_sw_info(sw, "uid: %#llx\n", sw->uid);
 408
 409         for (i = 0; i <= sw->config.max_port_number; i++) {
 410                 if (sw->ports[i].disabled) {
 411                         tb_port_info(&sw->ports[i], "disabled by eeprom\n");
 412                         continue;
 413                 }
 414                 if (tb_init_port(&sw->ports[i]))
 415                         goto err;
 416         }
 417
 418         /* TODO: I2C, IECS, link controller */
 419
 420         if (tb_plug_events_active(sw, true))
 421                 goto err;
 422
 423         return sw;
 424 err:
 425         kfree(sw->ports);
 426         kfree(sw->drom);
 427         kfree(sw);
 428         return NULL;
 429 }
 430
 431 /**
 432  * tb_sw_set_unplugged() - set is_unplugged on switch and downstream switches
 433  */
 434 void tb_sw_set_unplugged(struct tb_switch *sw)
 435 {
 436         int i;
 437         if (sw == sw->tb->root_switch) {
 438                 tb_sw_WARN(sw, "cannot unplug root switch\n");
 439                 return;
 440         }
 441         if (sw->is_unplugged) {
 442                 tb_sw_WARN(sw, "is_unplugged already set\n");
 443                 return;
 444         }
 445         sw->is_unplugged = true;
 446         for (i = 0; i <= sw->config.max_port_number; i++) {
 447                 if (!tb_is_upstream_port(&sw->ports[i]) && sw->ports[i].remote)
 448                         tb_sw_set_unplugged(sw->ports[i].remote->sw);
 449         }
 450 }
 451
 452 int tb_switch_resume(struct tb_switch *sw)
 453 {
 454         int i, err;
 455         u64 uid;
 456         tb_sw_info(sw, "resuming switch\n");
 457
 458         err = tb_drom_read_uid_only(sw, &uid);
 459         if (err) {
 460                 tb_sw_warn(sw, "uid read failed\n");
 461                 return err;
 462         }
 463         if (sw != sw->tb->root_switch && sw->uid != uid) {
 464                 tb_sw_info(sw,
 465                         "changed while suspended (uid %#llx -> %#llx)\n",
 466                         sw->uid, uid);
 467                 return -ENODEV;
 468         }
 469
 470         /* upload configuration */
 471         err = tb_sw_write(sw, 1 + (u32 *) &sw->config, TB_CFG_SWITCH, 1, 3);
 472         if (err)
 473                 return err;
 474
 475         err = tb_plug_events_active(sw, true);
 476         if (err)
 477                 return err;
 478
 479         /* check for surviving downstream switches */
 480         for (i = 1; i <= sw->config.max_port_number; i++) {
 481                 struct tb_port *port = &sw->ports[i];
 482                 if (tb_is_upstream_port(port))
 483                         continue;
 484                 if (!port->remote)
 485                         continue;
 486                 if (tb_wait_for_port(port, true) <= 0
 487                         || tb_switch_resume(port->remote->sw)) {
 488                         tb_port_warn(port,
 489                                      "lost during suspend, disconnecting\n");
 490                         tb_sw_set_unplugged(port->remote->sw);
 491                 }
 492         }
 493         return 0;
 494 }
 495
 496 void tb_switch_suspend(struct tb_switch *sw)
 497 {
 498         int i, err;
 499         err = tb_plug_events_active(sw, false);
 500         if (err)
 501                 return;
 502
 503         for (i = 1; i <= sw->config.max_port_number; i++) {
 504                 if (!tb_is_upstream_port(&sw->ports[i]) && sw->ports[i].remote)
 505                         tb_switch_suspend(sw->ports[i].remote->sw);
 506         }
 507         /*
 508          * TODO: invoke tb_cfg_prepare_to_sleep here? does not seem to have any
 509          * effect?
 510          */
 511 }