x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / drivers / watchdog / wdat_wdt.c
blob6d1fbda0f461ca2d2304eaeb43aef35adfd77cf4
1 /*
2 * ACPI Hardware Watchdog (WDAT) driver.
4 * Copyright (C) 2016, Intel Corporation
5 * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/acpi.h>
13 #include <linux/ioport.h>
14 #include <linux/module.h>
15 #include <linux/platform_device.h>
16 #include <linux/pm.h>
17 #include <linux/watchdog.h>
19 #define MAX_WDAT_ACTIONS ACPI_WDAT_ACTION_RESERVED
21 /**
22 * struct wdat_instruction - Single ACPI WDAT instruction
23 * @entry: Copy of the ACPI table instruction
24 * @reg: Register the instruction is accessing
25 * @node: Next instruction in action sequence
27 struct wdat_instruction {
28 struct acpi_wdat_entry entry;
29 void __iomem *reg;
30 struct list_head node;
33 /**
34 * struct wdat_wdt - ACPI WDAT watchdog device
35 * @pdev: Parent platform device
36 * @wdd: Watchdog core device
37 * @period: How long is one watchdog period in ms
38 * @stopped_in_sleep: Is this watchdog stopped by the firmware in S1-S5
39 * @stopped: Was the watchdog stopped by the driver in suspend
40 * @actions: An array of instruction lists indexed by an action number from
41 * the WDAT table. There can be %NULL entries for not implemented
42 * actions.
44 struct wdat_wdt {
45 struct platform_device *pdev;
46 struct watchdog_device wdd;
47 unsigned int period;
48 bool stopped_in_sleep;
49 bool stopped;
50 struct list_head *instructions[MAX_WDAT_ACTIONS];
53 #define to_wdat_wdt(wdd) container_of(wdd, struct wdat_wdt, wdd)
55 static bool nowayout = WATCHDOG_NOWAYOUT;
56 module_param(nowayout, bool, 0);
57 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
58 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
60 static int wdat_wdt_read(struct wdat_wdt *wdat,
61 const struct wdat_instruction *instr, u32 *value)
63 const struct acpi_generic_address *gas = &instr->entry.register_region;
65 switch (gas->access_width) {
66 case 1:
67 *value = ioread8(instr->reg);
68 break;
69 case 2:
70 *value = ioread16(instr->reg);
71 break;
72 case 3:
73 *value = ioread32(instr->reg);
74 break;
75 default:
76 return -EINVAL;
79 dev_dbg(&wdat->pdev->dev, "Read %#x from 0x%08llx\n", *value,
80 gas->address);
82 return 0;
85 static int wdat_wdt_write(struct wdat_wdt *wdat,
86 const struct wdat_instruction *instr, u32 value)
88 const struct acpi_generic_address *gas = &instr->entry.register_region;
90 switch (gas->access_width) {
91 case 1:
92 iowrite8((u8)value, instr->reg);
93 break;
94 case 2:
95 iowrite16((u16)value, instr->reg);
96 break;
97 case 3:
98 iowrite32(value, instr->reg);
99 break;
100 default:
101 return -EINVAL;
104 dev_dbg(&wdat->pdev->dev, "Wrote %#x to 0x%08llx\n", value,
105 gas->address);
107 return 0;
110 static int wdat_wdt_run_action(struct wdat_wdt *wdat, unsigned int action,
111 u32 param, u32 *retval)
113 struct wdat_instruction *instr;
115 if (action >= ARRAY_SIZE(wdat->instructions))
116 return -EINVAL;
118 if (!wdat->instructions[action])
119 return -EOPNOTSUPP;
121 dev_dbg(&wdat->pdev->dev, "Running action %#x\n", action);
123 /* Run each instruction sequentially */
124 list_for_each_entry(instr, wdat->instructions[action], node) {
125 const struct acpi_wdat_entry *entry = &instr->entry;
126 const struct acpi_generic_address *gas;
127 u32 flags, value, mask, x, y;
128 bool preserve;
129 int ret;
131 gas = &entry->register_region;
133 preserve = entry->instruction & ACPI_WDAT_PRESERVE_REGISTER;
134 flags = entry->instruction & ~ACPI_WDAT_PRESERVE_REGISTER;
135 value = entry->value;
136 mask = entry->mask;
138 switch (flags) {
139 case ACPI_WDAT_READ_VALUE:
140 ret = wdat_wdt_read(wdat, instr, &x);
141 if (ret)
142 return ret;
143 x >>= gas->bit_offset;
144 x &= mask;
145 if (retval)
146 *retval = x == value;
147 break;
149 case ACPI_WDAT_READ_COUNTDOWN:
150 ret = wdat_wdt_read(wdat, instr, &x);
151 if (ret)
152 return ret;
153 x >>= gas->bit_offset;
154 x &= mask;
155 if (retval)
156 *retval = x;
157 break;
159 case ACPI_WDAT_WRITE_VALUE:
160 x = value & mask;
161 x <<= gas->bit_offset;
162 if (preserve) {
163 ret = wdat_wdt_read(wdat, instr, &y);
164 if (ret)
165 return ret;
166 y = y & ~(mask << gas->bit_offset);
167 x |= y;
169 ret = wdat_wdt_write(wdat, instr, x);
170 if (ret)
171 return ret;
172 break;
174 case ACPI_WDAT_WRITE_COUNTDOWN:
175 x = param;
176 x &= mask;
177 x <<= gas->bit_offset;
178 if (preserve) {
179 ret = wdat_wdt_read(wdat, instr, &y);
180 if (ret)
181 return ret;
182 y = y & ~(mask << gas->bit_offset);
183 x |= y;
185 ret = wdat_wdt_write(wdat, instr, x);
186 if (ret)
187 return ret;
188 break;
190 default:
191 dev_err(&wdat->pdev->dev, "Unknown instruction: %u\n",
192 flags);
193 return -EINVAL;
197 return 0;
200 static int wdat_wdt_enable_reboot(struct wdat_wdt *wdat)
202 int ret;
205 * WDAT specification says that the watchdog is required to reboot
206 * the system when it fires. However, it also states that it is
207 * recommeded to make it configurable through hardware register. We
208 * enable reboot now if it is configrable, just in case.
210 ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_REBOOT, 0, NULL);
211 if (ret && ret != -EOPNOTSUPP) {
212 dev_err(&wdat->pdev->dev,
213 "Failed to enable reboot when watchdog triggers\n");
214 return ret;
217 return 0;
220 static void wdat_wdt_boot_status(struct wdat_wdt *wdat)
222 u32 boot_status = 0;
223 int ret;
225 ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_STATUS, 0, &boot_status);
226 if (ret && ret != -EOPNOTSUPP) {
227 dev_err(&wdat->pdev->dev, "Failed to read boot status\n");
228 return;
231 if (boot_status)
232 wdat->wdd.bootstatus = WDIOF_CARDRESET;
234 /* Clear the boot status in case BIOS did not do it */
235 ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_STATUS, 0, NULL);
236 if (ret && ret != -EOPNOTSUPP)
237 dev_err(&wdat->pdev->dev, "Failed to clear boot status\n");
240 static void wdat_wdt_set_running(struct wdat_wdt *wdat)
242 u32 running = 0;
243 int ret;
245 ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_RUNNING_STATE, 0,
246 &running);
247 if (ret && ret != -EOPNOTSUPP)
248 dev_err(&wdat->pdev->dev, "Failed to read running state\n");
250 if (running)
251 set_bit(WDOG_HW_RUNNING, &wdat->wdd.status);
254 static int wdat_wdt_start(struct watchdog_device *wdd)
256 return wdat_wdt_run_action(to_wdat_wdt(wdd),
257 ACPI_WDAT_SET_RUNNING_STATE, 0, NULL);
260 static int wdat_wdt_stop(struct watchdog_device *wdd)
262 return wdat_wdt_run_action(to_wdat_wdt(wdd),
263 ACPI_WDAT_SET_STOPPED_STATE, 0, NULL);
266 static int wdat_wdt_ping(struct watchdog_device *wdd)
268 return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_RESET, 0, NULL);
271 static int wdat_wdt_set_timeout(struct watchdog_device *wdd,
272 unsigned int timeout)
274 struct wdat_wdt *wdat = to_wdat_wdt(wdd);
275 unsigned int periods;
276 int ret;
278 periods = timeout * 1000 / wdat->period;
279 ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_COUNTDOWN, periods, NULL);
280 if (!ret)
281 wdd->timeout = timeout;
282 return ret;
285 static unsigned int wdat_wdt_get_timeleft(struct watchdog_device *wdd)
287 struct wdat_wdt *wdat = to_wdat_wdt(wdd);
288 u32 periods = 0;
290 wdat_wdt_run_action(wdat, ACPI_WDAT_GET_COUNTDOWN, 0, &periods);
291 return periods * wdat->period / 1000;
294 static const struct watchdog_info wdat_wdt_info = {
295 .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
296 .firmware_version = 0,
297 .identity = "wdat_wdt",
300 static const struct watchdog_ops wdat_wdt_ops = {
301 .owner = THIS_MODULE,
302 .start = wdat_wdt_start,
303 .stop = wdat_wdt_stop,
304 .ping = wdat_wdt_ping,
305 .set_timeout = wdat_wdt_set_timeout,
306 .get_timeleft = wdat_wdt_get_timeleft,
309 static int wdat_wdt_probe(struct platform_device *pdev)
311 const struct acpi_wdat_entry *entries;
312 const struct acpi_table_wdat *tbl;
313 struct wdat_wdt *wdat;
314 struct resource *res;
315 void __iomem **regs;
316 acpi_status status;
317 int i, ret;
319 status = acpi_get_table(ACPI_SIG_WDAT, 0,
320 (struct acpi_table_header **)&tbl);
321 if (ACPI_FAILURE(status))
322 return -ENODEV;
324 wdat = devm_kzalloc(&pdev->dev, sizeof(*wdat), GFP_KERNEL);
325 if (!wdat)
326 return -ENOMEM;
328 regs = devm_kcalloc(&pdev->dev, pdev->num_resources, sizeof(*regs),
329 GFP_KERNEL);
330 if (!regs)
331 return -ENOMEM;
333 /* WDAT specification wants to have >= 1ms period */
334 if (tbl->timer_period < 1)
335 return -EINVAL;
336 if (tbl->min_count > tbl->max_count)
337 return -EINVAL;
339 wdat->period = tbl->timer_period;
340 wdat->wdd.min_hw_heartbeat_ms = wdat->period * tbl->min_count;
341 wdat->wdd.max_hw_heartbeat_ms = wdat->period * tbl->max_count;
342 wdat->stopped_in_sleep = tbl->flags & ACPI_WDAT_STOPPED;
343 wdat->wdd.info = &wdat_wdt_info;
344 wdat->wdd.ops = &wdat_wdt_ops;
345 wdat->pdev = pdev;
347 /* Request and map all resources */
348 for (i = 0; i < pdev->num_resources; i++) {
349 void __iomem *reg;
351 res = &pdev->resource[i];
352 if (resource_type(res) == IORESOURCE_MEM) {
353 reg = devm_ioremap_resource(&pdev->dev, res);
354 if (IS_ERR(reg))
355 return PTR_ERR(reg);
356 } else if (resource_type(res) == IORESOURCE_IO) {
357 reg = devm_ioport_map(&pdev->dev, res->start, 1);
358 if (!reg)
359 return -ENOMEM;
360 } else {
361 dev_err(&pdev->dev, "Unsupported resource\n");
362 return -EINVAL;
365 regs[i] = reg;
368 entries = (struct acpi_wdat_entry *)(tbl + 1);
369 for (i = 0; i < tbl->entries; i++) {
370 const struct acpi_generic_address *gas;
371 struct wdat_instruction *instr;
372 struct list_head *instructions;
373 unsigned int action;
374 struct resource r;
375 int j;
377 action = entries[i].action;
378 if (action >= MAX_WDAT_ACTIONS) {
379 dev_dbg(&pdev->dev, "Skipping unknown action: %u\n",
380 action);
381 continue;
384 instr = devm_kzalloc(&pdev->dev, sizeof(*instr), GFP_KERNEL);
385 if (!instr)
386 return -ENOMEM;
388 INIT_LIST_HEAD(&instr->node);
389 instr->entry = entries[i];
391 gas = &entries[i].register_region;
393 memset(&r, 0, sizeof(r));
394 r.start = gas->address;
395 r.end = r.start + gas->access_width;
396 if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
397 r.flags = IORESOURCE_MEM;
398 } else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
399 r.flags = IORESOURCE_IO;
400 } else {
401 dev_dbg(&pdev->dev, "Unsupported address space: %d\n",
402 gas->space_id);
403 continue;
406 /* Find the matching resource */
407 for (j = 0; j < pdev->num_resources; j++) {
408 res = &pdev->resource[j];
409 if (resource_contains(res, &r)) {
410 instr->reg = regs[j] + r.start - res->start;
411 break;
415 if (!instr->reg) {
416 dev_err(&pdev->dev, "I/O resource not found\n");
417 return -EINVAL;
420 instructions = wdat->instructions[action];
421 if (!instructions) {
422 instructions = devm_kzalloc(&pdev->dev,
423 sizeof(*instructions), GFP_KERNEL);
424 if (!instructions)
425 return -ENOMEM;
427 INIT_LIST_HEAD(instructions);
428 wdat->instructions[action] = instructions;
431 list_add_tail(&instr->node, instructions);
434 wdat_wdt_boot_status(wdat);
435 wdat_wdt_set_running(wdat);
437 ret = wdat_wdt_enable_reboot(wdat);
438 if (ret)
439 return ret;
441 platform_set_drvdata(pdev, wdat);
443 watchdog_set_nowayout(&wdat->wdd, nowayout);
444 return devm_watchdog_register_device(&pdev->dev, &wdat->wdd);
447 #ifdef CONFIG_PM_SLEEP
448 static int wdat_wdt_suspend_noirq(struct device *dev)
450 struct platform_device *pdev = to_platform_device(dev);
451 struct wdat_wdt *wdat = platform_get_drvdata(pdev);
452 int ret;
454 if (!watchdog_active(&wdat->wdd))
455 return 0;
458 * We need to stop the watchdog if firmare is not doing it or if we
459 * are going suspend to idle (where firmware is not involved). If
460 * firmware is stopping the watchdog we kick it here one more time
461 * to give it some time.
463 wdat->stopped = false;
464 if (acpi_target_system_state() == ACPI_STATE_S0 ||
465 !wdat->stopped_in_sleep) {
466 ret = wdat_wdt_stop(&wdat->wdd);
467 if (!ret)
468 wdat->stopped = true;
469 } else {
470 ret = wdat_wdt_ping(&wdat->wdd);
473 return ret;
476 static int wdat_wdt_resume_noirq(struct device *dev)
478 struct platform_device *pdev = to_platform_device(dev);
479 struct wdat_wdt *wdat = platform_get_drvdata(pdev);
480 int ret;
482 if (!watchdog_active(&wdat->wdd))
483 return 0;
485 if (!wdat->stopped) {
487 * Looks like the boot firmware reinitializes the watchdog
488 * before it hands off to the OS on resume from sleep so we
489 * stop and reprogram the watchdog here.
491 ret = wdat_wdt_stop(&wdat->wdd);
492 if (ret)
493 return ret;
495 ret = wdat_wdt_set_timeout(&wdat->wdd, wdat->wdd.timeout);
496 if (ret)
497 return ret;
499 ret = wdat_wdt_enable_reboot(wdat);
500 if (ret)
501 return ret;
503 ret = wdat_wdt_ping(&wdat->wdd);
504 if (ret)
505 return ret;
508 return wdat_wdt_start(&wdat->wdd);
510 #endif
512 static const struct dev_pm_ops wdat_wdt_pm_ops = {
513 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(wdat_wdt_suspend_noirq,
514 wdat_wdt_resume_noirq)
517 static struct platform_driver wdat_wdt_driver = {
518 .probe = wdat_wdt_probe,
519 .driver = {
520 .name = "wdat_wdt",
521 .pm = &wdat_wdt_pm_ops,
525 module_platform_driver(wdat_wdt_driver);
527 MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
528 MODULE_DESCRIPTION("ACPI Hardware Watchdog (WDAT) driver");
529 MODULE_LICENSE("GPL v2");
530 MODULE_ALIAS("platform:wdat_wdt");