include/uapi/scsi/fc/fc_fs.h

   1 /*
   2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Maintained at www.Open-FCoE.org
  18  */
  19
  20 #ifndef _FC_FS_H_
  21 #define _FC_FS_H_
  22
  23 #include <linux/types.h>
  24
  25 /*
  26  * Fibre Channel Framing and Signalling definitions.
  27  * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
  28  */
  29
  30 /*
  31  * Frame header
  32  */
  33 struct fc_frame_header {
  34         __u8          fh_r_ctl; /* routing control */
  35         __u8          fh_d_id[3];       /* Destination ID */
  36
  37         __u8          fh_cs_ctl;        /* class of service control / pri */
  38         __u8          fh_s_id[3];       /* Source ID */
  39
  40         __u8          fh_type;          /* see enum fc_fh_type below */
  41         __u8          fh_f_ctl[3];      /* frame control */
  42
  43         __u8          fh_seq_id;        /* sequence ID */
  44         __u8          fh_df_ctl;        /* data field control */
  45         __be16        fh_seq_cnt;       /* sequence count */
  46
  47         __be16        fh_ox_id;         /* originator exchange ID */
  48         __be16        fh_rx_id;         /* responder exchange ID */
  49         __be32        fh_parm_offset;   /* parameter or relative offset */
  50 };
  51
  52 #define FC_FRAME_HEADER_LEN 24  /* expected length of structure */
  53
  54 #define FC_MAX_PAYLOAD  2112U           /* max payload length in bytes */
  55 #define FC_MIN_MAX_PAYLOAD  256U        /* lower limit on max payload */
  56
  57 #define FC_MAX_FRAME    (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
  58 #define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
  59
  60 /*
  61  * fh_r_ctl - Routing control definitions.
  62  */
  63     /*
  64      * FC-4 device_data.
  65      */
  66 enum fc_rctl {
  67         FC_RCTL_DD_UNCAT = 0x00,        /* uncategorized information */
  68         FC_RCTL_DD_SOL_DATA = 0x01,     /* solicited data */
  69         FC_RCTL_DD_UNSOL_CTL = 0x02,    /* unsolicited control */
  70         FC_RCTL_DD_SOL_CTL = 0x03,      /* solicited control or reply */
  71         FC_RCTL_DD_UNSOL_DATA = 0x04,   /* unsolicited data */
  72         FC_RCTL_DD_DATA_DESC = 0x05,    /* data descriptor */
  73         FC_RCTL_DD_UNSOL_CMD = 0x06,    /* unsolicited command */
  74         FC_RCTL_DD_CMD_STATUS = 0x07,   /* command status */
  75
  76 #define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL    /* ILS request */
  77 #define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL      /* ILS reply */
  78
  79         /*
  80          * Extended Link_Data
  81          */
  82         FC_RCTL_ELS_REQ = 0x22, /* extended link services request */
  83         FC_RCTL_ELS_REP = 0x23, /* extended link services reply */
  84         FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
  85         FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
  86         /*
  87          * Optional Extended Headers
  88          */
  89         FC_RCTL_VFTH = 0x50,    /* virtual fabric tagging header */
  90         FC_RCTL_IFRH = 0x51,    /* inter-fabric routing header */
  91         FC_RCTL_ENCH = 0x52,    /* encapsulation header */
  92         /*
  93          * Basic Link Services fh_r_ctl values.
  94          */
  95         FC_RCTL_BA_NOP = 0x80,  /* basic link service NOP */
  96         FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */
  97         FC_RCTL_BA_RMC = 0x82,  /* remove connection */
  98         FC_RCTL_BA_ACC = 0x84,  /* basic accept */
  99         FC_RCTL_BA_RJT = 0x85,  /* basic reject */
 100         FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */
 101         /*
 102          * Link Control Information.
 103          */
 104         FC_RCTL_ACK_1 = 0xc0,   /* acknowledge_1 */
 105         FC_RCTL_ACK_0 = 0xc1,   /* acknowledge_0 */
 106         FC_RCTL_P_RJT = 0xc2,   /* port reject */
 107         FC_RCTL_F_RJT = 0xc3,   /* fabric reject */
 108         FC_RCTL_P_BSY = 0xc4,   /* port busy */
 109         FC_RCTL_F_BSY = 0xc5,   /* fabric busy to data frame */
 110         FC_RCTL_F_BSYL = 0xc6,  /* fabric busy to link control frame */
 111         FC_RCTL_LCR = 0xc7,     /* link credit reset */
 112         FC_RCTL_END = 0xc9,     /* end */
 113 };
 114                                     /* incomplete list of definitions */
 115
 116 /*
 117  * R_CTL names initializer.
 118  * Please keep this matching the above definitions.
 119  */
 120 #define FC_RCTL_NAMES_INIT { \
 121         [FC_RCTL_DD_UNCAT] =            "uncat",                        \
 122         [FC_RCTL_DD_SOL_DATA] =         "sol data",                     \
 123         [FC_RCTL_DD_UNSOL_CTL] =        "unsol ctl",                    \
 124         [FC_RCTL_DD_SOL_CTL] =          "sol ctl/reply",                \
 125         [FC_RCTL_DD_UNSOL_DATA] =       "unsol data",                   \
 126         [FC_RCTL_DD_DATA_DESC] =        "data desc",                    \
 127         [FC_RCTL_DD_UNSOL_CMD] =        "unsol cmd",                    \
 128         [FC_RCTL_DD_CMD_STATUS] =       "cmd status",                   \
 129         [FC_RCTL_ELS_REQ] =             "ELS req",                      \
 130         [FC_RCTL_ELS_REP] =             "ELS rep",                      \
 131         [FC_RCTL_ELS4_REQ] =            "FC-4 ELS req",                 \
 132         [FC_RCTL_ELS4_REP] =            "FC-4 ELS rep",                 \
 133         [FC_RCTL_BA_NOP] =              "BLS NOP",                      \
 134         [FC_RCTL_BA_ABTS] =             "BLS abort",                    \
 135         [FC_RCTL_BA_RMC] =              "BLS remove connection",        \
 136         [FC_RCTL_BA_ACC] =              "BLS accept",                   \
 137         [FC_RCTL_BA_RJT] =              "BLS reject",                   \
 138         [FC_RCTL_BA_PRMT] =             "BLS dedicated connection preempted", \
 139         [FC_RCTL_ACK_1] =               "LC ACK_1",                     \
 140         [FC_RCTL_ACK_0] =               "LC ACK_0",                     \
 141         [FC_RCTL_P_RJT] =               "LC port reject",               \
 142         [FC_RCTL_F_RJT] =               "LC fabric reject",             \
 143         [FC_RCTL_P_BSY] =               "LC port busy",                 \
 144         [FC_RCTL_F_BSY] =               "LC fabric busy to data frame", \
 145         [FC_RCTL_F_BSYL] =              "LC fabric busy to link control frame",\
 146         [FC_RCTL_LCR] =                 "LC link credit reset",         \
 147         [FC_RCTL_END] =                 "LC end",                       \
 148 }
 149
 150 /*
 151  * Well-known fabric addresses.
 152  */
 153 enum fc_well_known_fid {
 154         FC_FID_NONE =           0x000000,       /* No destination */
 155         FC_FID_BCAST =          0xffffff,       /* broadcast */
 156         FC_FID_FLOGI =          0xfffffe,       /* fabric login */
 157         FC_FID_FCTRL =          0xfffffd,       /* fabric controller */
 158         FC_FID_DIR_SERV =       0xfffffc,       /* directory server */
 159         FC_FID_TIME_SERV =      0xfffffb,       /* time server */
 160         FC_FID_MGMT_SERV =      0xfffffa,       /* management server */
 161         FC_FID_QOS =            0xfffff9,       /* QoS Facilitator */
 162         FC_FID_ALIASES =        0xfffff8,       /* alias server (FC-PH2) */
 163         FC_FID_SEC_KEY =        0xfffff7,       /* Security key dist. server */
 164         FC_FID_CLOCK =          0xfffff6,       /* clock synch server */
 165         FC_FID_MCAST_SERV =     0xfffff5,       /* multicast server */
 166 };
 167
 168 #define FC_FID_WELL_KNOWN_MAX   0xffffff /* highest well-known fabric ID */
 169 #define FC_FID_WELL_KNOWN_BASE  0xfffff5 /* start of well-known fabric ID */
 170
 171 /*
 172  * Other well-known addresses, outside the above contiguous range.
 173  */
 174 #define FC_FID_DOM_MGR          0xfffc00        /* domain manager base */
 175
 176 /*
 177  * Fabric ID bytes.
 178  */
 179 #define FC_FID_DOMAIN           0
 180 #define FC_FID_PORT             1
 181 #define FC_FID_LINK             2
 182
 183 /*
 184  * fh_type codes
 185  */
 186 enum fc_fh_type {
 187         FC_TYPE_BLS =   0x00,   /* basic link service */
 188         FC_TYPE_ELS =   0x01,   /* extended link service */
 189         FC_TYPE_IP =    0x05,   /* IP over FC, RFC 4338 */
 190         FC_TYPE_FCP =   0x08,   /* SCSI FCP */
 191         FC_TYPE_CT =    0x20,   /* Fibre Channel Services (FC-CT) */
 192         FC_TYPE_ILS =   0x22,   /* internal link service */
 193         FC_TYPE_NVME =  0x28,   /* FC-NVME */
 194 };
 195
 196 /*
 197  * FC_TYPE names initializer.
 198  * Please keep this matching the above definitions.
 199  */
 200 #define FC_TYPE_NAMES_INIT {                            \
 201         [FC_TYPE_BLS] =         "BLS",                  \
 202         [FC_TYPE_ELS] =         "ELS",                  \
 203         [FC_TYPE_IP] =          "IP",                   \
 204         [FC_TYPE_FCP] =         "FCP",                  \
 205         [FC_TYPE_CT] =          "CT",                   \
 206         [FC_TYPE_ILS] =         "ILS",                  \
 207         [FC_TYPE_NVME] =        "NVME",                 \
 208 }
 209
 210 /*
 211  * Exchange IDs.
 212  */
 213 #define FC_XID_UNKNOWN  0xffff  /* unknown exchange ID */
 214 #define FC_XID_MIN      0x0     /* supported min exchange ID */
 215 #define FC_XID_MAX      0xfffe  /* supported max exchange ID */
 216
 217 /*
 218  * fh_f_ctl - Frame control flags.
 219  */
 220 #define FC_FC_EX_CTX    (1 << 23)       /* sent by responder to exchange */
 221 #define FC_FC_SEQ_CTX   (1 << 22)       /* sent by responder to sequence */
 222 #define FC_FC_FIRST_SEQ (1 << 21)       /* first sequence of this exchange */
 223 #define FC_FC_LAST_SEQ  (1 << 20)       /* last sequence of this exchange */
 224 #define FC_FC_END_SEQ   (1 << 19)       /* last frame of sequence */
 225 #define FC_FC_END_CONN  (1 << 18)       /* end of class 1 connection pending */
 226 #define FC_FC_RES_B17   (1 << 17)       /* reserved */
 227 #define FC_FC_SEQ_INIT  (1 << 16)       /* transfer of sequence initiative */
 228 #define FC_FC_X_ID_REASS (1 << 15)      /* exchange ID has been changed */
 229 #define FC_FC_X_ID_INVAL (1 << 14)      /* exchange ID invalidated */
 230
 231 #define FC_FC_ACK_1     (1 << 12)       /* 13:12 = 1: ACK_1 expected */
 232 #define FC_FC_ACK_N     (2 << 12)       /* 13:12 = 2: ACK_N expected */
 233 #define FC_FC_ACK_0     (3 << 12)       /* 13:12 = 3: ACK_0 expected */
 234
 235 #define FC_FC_RES_B11   (1 << 11)       /* reserved */
 236 #define FC_FC_RES_B10   (1 << 10)       /* reserved */
 237 #define FC_FC_RETX_SEQ  (1 << 9)        /* retransmitted sequence */
 238 #define FC_FC_UNI_TX    (1 << 8)        /* unidirectional transmit (class 1) */
 239 #define FC_FC_CONT_SEQ(i) ((i) << 6)
 240 #define FC_FC_ABT_SEQ(i) ((i) << 4)
 241 #define FC_FC_REL_OFF   (1 << 3)        /* parameter is relative offset */
 242 #define FC_FC_RES2      (1 << 2)        /* reserved */
 243 #define FC_FC_FILL(i)   ((i) & 3)       /* 1:0: bytes of trailing fill */
 244
 245 /*
 246  * BA_ACC payload.
 247  */
 248 struct fc_ba_acc {
 249         __u8            ba_seq_id_val;  /* SEQ_ID validity */
 250 #define FC_BA_SEQ_ID_VAL 0x80
 251         __u8            ba_seq_id;      /* SEQ_ID of seq last deliverable */
 252         __u8            ba_resvd[2];    /* reserved */
 253         __be16          ba_ox_id;       /* OX_ID for aborted seq or exch */
 254         __be16          ba_rx_id;       /* RX_ID for aborted seq or exch */
 255         __be16          ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */
 256         __be16          ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
 257 };
 258
 259 /*
 260  * BA_RJT: Basic Reject payload.
 261  */
 262 struct fc_ba_rjt {
 263         __u8            br_resvd;       /* reserved */
 264         __u8            br_reason;      /* reason code */
 265         __u8            br_explan;      /* reason explanation */
 266         __u8            br_vendor;      /* vendor unique code */
 267 };
 268
 269 /*
 270  * BA_RJT reason codes.
 271  * From FS-2.
 272  */
 273 enum fc_ba_rjt_reason {
 274         FC_BA_RJT_NONE =        0,      /* in software this means no reject */
 275         FC_BA_RJT_INVL_CMD =    0x01,   /* invalid command code */
 276         FC_BA_RJT_LOG_ERR =     0x03,   /* logical error */
 277         FC_BA_RJT_LOG_BUSY =    0x05,   /* logical busy */
 278         FC_BA_RJT_PROTO_ERR =   0x07,   /* protocol error */
 279         FC_BA_RJT_UNABLE =      0x09,   /* unable to perform request */
 280         FC_BA_RJT_VENDOR =      0xff,   /* vendor-specific (see br_vendor) */
 281 };
 282
 283 /*
 284  * BA_RJT reason code explanations.
 285  */
 286 enum fc_ba_rjt_explan {
 287         FC_BA_RJT_EXP_NONE =    0x00,   /* no additional expanation */
 288         FC_BA_RJT_INV_XID =     0x03,   /* invalid OX_ID-RX_ID combination */
 289         FC_BA_RJT_ABT =         0x05,   /* sequence aborted, no seq info */
 290 };
 291
 292 /*
 293  * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
 294  */
 295 struct fc_pf_rjt {
 296         __u8            rj_action;      /* reserved */
 297         __u8            rj_reason;      /* reason code */
 298         __u8            rj_resvd;       /* reserved */
 299         __u8            rj_vendor;      /* vendor unique code */
 300 };
 301
 302 /*
 303  * P_RJT and F_RJT reject reason codes.
 304  */
 305 enum fc_pf_rjt_reason {
 306         FC_RJT_NONE =           0,      /* non-reject (reserved by standard) */
 307         FC_RJT_INVL_DID =       0x01,   /* invalid destination ID */
 308         FC_RJT_INVL_SID =       0x02,   /* invalid source ID */
 309         FC_RJT_P_UNAV_T =       0x03,   /* port unavailable, temporary */
 310         FC_RJT_P_UNAV =         0x04,   /* port unavailable, permanent */
 311         FC_RJT_CLS_UNSUP =      0x05,   /* class not supported */
 312         FC_RJT_DEL_USAGE =      0x06,   /* delimiter usage error */
 313         FC_RJT_TYPE_UNSUP =     0x07,   /* type not supported */
 314         FC_RJT_LINK_CTL =       0x08,   /* invalid link control */
 315         FC_RJT_R_CTL =          0x09,   /* invalid R_CTL field */
 316         FC_RJT_F_CTL =          0x0a,   /* invalid F_CTL field */
 317         FC_RJT_OX_ID =          0x0b,   /* invalid originator exchange ID */
 318         FC_RJT_RX_ID =          0x0c,   /* invalid responder exchange ID */
 319         FC_RJT_SEQ_ID =         0x0d,   /* invalid sequence ID */
 320         FC_RJT_DF_CTL =         0x0e,   /* invalid DF_CTL field */
 321         FC_RJT_SEQ_CNT =        0x0f,   /* invalid SEQ_CNT field */
 322         FC_RJT_PARAM =          0x10,   /* invalid parameter field */
 323         FC_RJT_EXCH_ERR =       0x11,   /* exchange error */
 324         FC_RJT_PROTO =          0x12,   /* protocol error */
 325         FC_RJT_LEN =            0x13,   /* incorrect length */
 326         FC_RJT_UNEXP_ACK =      0x14,   /* unexpected ACK */
 327         FC_RJT_FAB_CLASS =      0x15,   /* class unsupported by fabric entity */
 328         FC_RJT_LOGI_REQ =       0x16,   /* login required */
 329         FC_RJT_SEQ_XS =         0x17,   /* excessive sequences attempted */
 330         FC_RJT_EXCH_EST =       0x18,   /* unable to establish exchange */
 331         FC_RJT_FAB_UNAV =       0x1a,   /* fabric unavailable */
 332         FC_RJT_VC_ID =          0x1b,   /* invalid VC_ID (class 4) */
 333         FC_RJT_CS_CTL =         0x1c,   /* invalid CS_CTL field */
 334         FC_RJT_INSUF_RES =      0x1d,   /* insuff. resources for VC (Class 4) */
 335         FC_RJT_INVL_CLS =       0x1f,   /* invalid class of service */
 336         FC_RJT_PREEMT_RJT =     0x20,   /* preemption request rejected */
 337         FC_RJT_PREEMT_DIS =     0x21,   /* preemption not enabled */
 338         FC_RJT_MCAST_ERR =      0x22,   /* multicast error */
 339         FC_RJT_MCAST_ET =       0x23,   /* multicast error terminate */
 340         FC_RJT_PRLI_REQ =       0x24,   /* process login required */
 341         FC_RJT_INVL_ATT =       0x25,   /* invalid attachment */
 342         FC_RJT_VENDOR =         0xff,   /* vendor specific reject */
 343 };
 344
 345 /* default timeout values */
 346
 347 #define FC_DEF_E_D_TOV  2000UL
 348 #define FC_DEF_R_A_TOV  10000UL
 349
 350 #endif /* _FC_FS_H_ */