?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / sound / pci / asihpi / hpi6000.c
blob2d6364825d4d2a05a81002253b4556ef6999ca10
1 /******************************************************************************
2
3 AudioScience HPI driver
4 Copyright (C) 1997-2011 AudioScience Inc. <support@audioscience.com>
5
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of version 2 of the GNU General Public License as
8 published by the Free Software Foundation;
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18
19 Hardware Programming Interface (HPI) for AudioScience ASI6200 series adapters.
20 These PCI bus adapters are based on the TI C6711 DSP.
21
22 Exported functions:
23 void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
24
25 #defines
26 HIDE_PCI_ASSERTS to show the PCI asserts
27 PROFILE_DSP2 get profile data from DSP2 if present (instead of DSP 1)
28
29 (C) Copyright AudioScience Inc. 1998-2003
30 *******************************************************************************/
31 #define SOURCEFILE_NAME "hpi6000.c"
32
33 #include "hpi_internal.h"
34 #include "hpimsginit.h"
35 #include "hpidebug.h"
36 #include "hpi6000.h"
37 #include "hpidspcd.h"
38 #include "hpicmn.h"
39
40 #define HPI_HIF_BASE (0x00000200) /* start of C67xx internal RAM */
41 #define HPI_HIF_ADDR(member) \
42 (HPI_HIF_BASE + offsetof(struct hpi_hif_6000, member))
43 #define HPI_HIF_ERROR_MASK 0x4000
44
45 /* HPI6000 specific error codes */
46 #define HPI6000_ERROR_BASE 900 /* not actually used anywhere */
47
48 /* operational/messaging errors */
49 #define HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT 901
50 #define HPI6000_ERROR_RESP_GET_LEN 902
51 #define HPI6000_ERROR_MSG_RESP_GET_RESP_ACK 903
52 #define HPI6000_ERROR_MSG_GET_ADR 904
53 #define HPI6000_ERROR_RESP_GET_ADR 905
54 #define HPI6000_ERROR_MSG_RESP_BLOCKWRITE32 906
55 #define HPI6000_ERROR_MSG_RESP_BLOCKREAD32 907
56
57 #define HPI6000_ERROR_CONTROL_CACHE_PARAMS 909
58
59 #define HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT 911
60 #define HPI6000_ERROR_SEND_DATA_ACK 912
61 #define HPI6000_ERROR_SEND_DATA_ADR 913
62 #define HPI6000_ERROR_SEND_DATA_TIMEOUT 914
63 #define HPI6000_ERROR_SEND_DATA_CMD 915
64 #define HPI6000_ERROR_SEND_DATA_WRITE 916
65 #define HPI6000_ERROR_SEND_DATA_IDLECMD 917
66
67 #define HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT 921
68 #define HPI6000_ERROR_GET_DATA_ACK 922
69 #define HPI6000_ERROR_GET_DATA_CMD 923
70 #define HPI6000_ERROR_GET_DATA_READ 924
71 #define HPI6000_ERROR_GET_DATA_IDLECMD 925
72
73 #define HPI6000_ERROR_CONTROL_CACHE_ADDRLEN 951
74 #define HPI6000_ERROR_CONTROL_CACHE_READ 952
75 #define HPI6000_ERROR_CONTROL_CACHE_FLUSH 953
76
77 #define HPI6000_ERROR_MSG_RESP_GETRESPCMD 961
78 #define HPI6000_ERROR_MSG_RESP_IDLECMD 962
79
80 /* Initialisation/bootload errors */
81 #define HPI6000_ERROR_UNHANDLED_SUBSYS_ID 930
82
83 /* can't access PCI2040 */
84 #define HPI6000_ERROR_INIT_PCI2040 931
85 /* can't access DSP HPI i/f */
86 #define HPI6000_ERROR_INIT_DSPHPI 932
87 /* can't access internal DSP memory */
88 #define HPI6000_ERROR_INIT_DSPINTMEM 933
89 /* can't access SDRAM - test#1 */
90 #define HPI6000_ERROR_INIT_SDRAM1 934
91 /* can't access SDRAM - test#2 */
92 #define HPI6000_ERROR_INIT_SDRAM2 935
93
94 #define HPI6000_ERROR_INIT_VERIFY 938
95
96 #define HPI6000_ERROR_INIT_NOACK 939
97
98 #define HPI6000_ERROR_INIT_PLDTEST1 941
99 #define HPI6000_ERROR_INIT_PLDTEST2 942
100
101 /* local defines */
102
103 #define HIDE_PCI_ASSERTS
104 #define PROFILE_DSP2
105
106 /* for PCI2040 i/f chip */
107 /* HPI CSR registers */
108 /* word offsets from CSR base */
109 /* use when io addresses defined as u32 * */
110
111 #define INTERRUPT_EVENT_SET 0
112 #define INTERRUPT_EVENT_CLEAR 1
113 #define INTERRUPT_MASK_SET 2
114 #define INTERRUPT_MASK_CLEAR 3
115 #define HPI_ERROR_REPORT 4
116 #define HPI_RESET 5
117 #define HPI_DATA_WIDTH 6
118
119 #define MAX_DSPS 2
120 /* HPI registers, spaced 8K bytes = 2K words apart */
121 #define DSP_SPACING 0x800
122
123 #define CONTROL 0x0000
124 #define ADDRESS 0x0200
125 #define DATA_AUTOINC 0x0400
126 #define DATA 0x0600
127
128 #define TIMEOUT 500000
129
130 struct dsp_obj {
131 __iomem u32 *prHPI_control;
132 __iomem u32 *prHPI_address;
133 __iomem u32 *prHPI_data;
134 __iomem u32 *prHPI_data_auto_inc;
135 char c_dsp_rev; /*A, B */
136 u32 control_cache_address_on_dsp;
137 u32 control_cache_length_on_dsp;
138 struct hpi_adapter_obj *pa_parent_adapter;
139 };
140
141 struct hpi_hw_obj {
142 __iomem u32 *dw2040_HPICSR;
143 __iomem u32 *dw2040_HPIDSP;
144
145 u16 num_dsp;
146 struct dsp_obj ado[MAX_DSPS];
147
148 u32 message_buffer_address_on_dsp;
149 u32 response_buffer_address_on_dsp;
150 u32 pCI2040HPI_error_count;
151
152 struct hpi_control_cache_single control_cache[HPI_NMIXER_CONTROLS];
153 struct hpi_control_cache *p_cache;
154 };
155
156 static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
157 u16 dsp_index, u32 hpi_address, u32 *source, u32 count);
158 static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
159 u16 dsp_index, u32 hpi_address, u32 *dest, u32 count);
160
161 static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
162 u32 *pos_error_code);
163 static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
164 u16 read_or_write);
165 #define H6READ 1
166 #define H6WRITE 0
167
168 static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
169 struct hpi_message *phm);
170 static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
171 u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr);
172
173 static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
174 struct hpi_response *phr);
175
176 static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
177 u32 ack_value);
178
179 static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
180 u16 dsp_index, u32 host_cmd);
181
182 static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo);
183
184 static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
185 struct hpi_message *phm, struct hpi_response *phr);
186
187 static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
188 struct hpi_message *phm, struct hpi_response *phr);
189
190 static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data);
191
192 static u32 hpi_read_word(struct dsp_obj *pdo, u32 address);
193
194 static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
195 u32 length);
196
197 static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
198 u32 length);
199
200 static void subsys_create_adapter(struct hpi_message *phm,
201 struct hpi_response *phr);
202
203 static void adapter_delete(struct hpi_adapter_obj *pao,
204 struct hpi_message *phm, struct hpi_response *phr);
205
206 static void adapter_get_asserts(struct hpi_adapter_obj *pao,
207 struct hpi_message *phm, struct hpi_response *phr);
208
209 static short create_adapter_obj(struct hpi_adapter_obj *pao,
210 u32 *pos_error_code);
211
212 static void delete_adapter_obj(struct hpi_adapter_obj *pao);
213
214 /* local globals */
215
216 static u16 gw_pci_read_asserts; /* used to count PCI2040 errors */
217 static u16 gw_pci_write_asserts; /* used to count PCI2040 errors */
218
219 static void subsys_message(struct hpi_message *phm, struct hpi_response *phr)
220 {
221 switch (phm->function) {
222 case HPI_SUBSYS_CREATE_ADAPTER:
223 subsys_create_adapter(phm, phr);
224 break;
225 default:
226 phr->error = HPI_ERROR_INVALID_FUNC;
227 break;
228 }
229 }
230
231 static void control_message(struct hpi_adapter_obj *pao,
232 struct hpi_message *phm, struct hpi_response *phr)
233 {
234 struct hpi_hw_obj *phw = pao->priv;
235
236 switch (phm->function) {
237 case HPI_CONTROL_GET_STATE:
238 if (pao->has_control_cache) {
239 u16 err;
240 err = hpi6000_update_control_cache(pao, phm);
241
242 if (err) {
243 if (err >= HPI_ERROR_BACKEND_BASE) {
244 phr->error =
245 HPI_ERROR_CONTROL_CACHING;
246 phr->specific_error = err;
247 } else {
248 phr->error = err;
249 }
250 break;
251 }
252
253 if (hpi_check_control_cache(phw->p_cache, phm, phr))
254 break;
255 }
256 hw_message(pao, phm, phr);
257 break;
258 case HPI_CONTROL_SET_STATE:
259 hw_message(pao, phm, phr);
260 hpi_cmn_control_cache_sync_to_msg(phw->p_cache, phm, phr);
261 break;
262
263 case HPI_CONTROL_GET_INFO:
264 default:
265 hw_message(pao, phm, phr);
266 break;
267 }
268 }
269
270 static void adapter_message(struct hpi_adapter_obj *pao,
271 struct hpi_message *phm, struct hpi_response *phr)
272 {
273 switch (phm->function) {
274 case HPI_ADAPTER_GET_ASSERT:
275 adapter_get_asserts(pao, phm, phr);
276 break;
277
278 case HPI_ADAPTER_DELETE:
279 adapter_delete(pao, phm, phr);
280 break;
281
282 default:
283 hw_message(pao, phm, phr);
284 break;
285 }
286 }
287
288 static void outstream_message(struct hpi_adapter_obj *pao,
289 struct hpi_message *phm, struct hpi_response *phr)
290 {
291 switch (phm->function) {
292 case HPI_OSTREAM_HOSTBUFFER_ALLOC:
293 case HPI_OSTREAM_HOSTBUFFER_FREE:
294 /* Don't let these messages go to the HW function because
295 * they're called without locking the spinlock.
296 * For the HPI6000 adapters the HW would return
297 * HPI_ERROR_INVALID_FUNC anyway.
298 */
299 phr->error = HPI_ERROR_INVALID_FUNC;
300 break;
301 default:
302 hw_message(pao, phm, phr);
303 return;
304 }
305 }
306
307 static void instream_message(struct hpi_adapter_obj *pao,
308 struct hpi_message *phm, struct hpi_response *phr)
309 {
310
311 switch (phm->function) {
312 case HPI_ISTREAM_HOSTBUFFER_ALLOC:
313 case HPI_ISTREAM_HOSTBUFFER_FREE:
314 /* Don't let these messages go to the HW function because
315 * they're called without locking the spinlock.
316 * For the HPI6000 adapters the HW would return
317 * HPI_ERROR_INVALID_FUNC anyway.
318 */
319 phr->error = HPI_ERROR_INVALID_FUNC;
320 break;
321 default:
322 hw_message(pao, phm, phr);
323 return;
324 }
325 }
326
327 /************************************************************************/
328 /** HPI_6000()
329 * Entry point from HPIMAN
330 * All calls to the HPI start here
331 */
332 void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
333 {
334 struct hpi_adapter_obj *pao = NULL;
335
336 if (phm->object != HPI_OBJ_SUBSYSTEM) {
337 pao = hpi_find_adapter(phm->adapter_index);
338 if (!pao) {
339 hpi_init_response(phr, phm->object, phm->function,
340 HPI_ERROR_BAD_ADAPTER_NUMBER);
341 HPI_DEBUG_LOG(DEBUG, "invalid adapter index: %d \n",
342 phm->adapter_index);
343 return;
344 }
345
346 /* Don't even try to communicate with crashed DSP */
347 if (pao->dsp_crashed >= 10) {
348 hpi_init_response(phr, phm->object, phm->function,
349 HPI_ERROR_DSP_HARDWARE);
350 HPI_DEBUG_LOG(DEBUG, "adapter %d dsp crashed\n",
351 phm->adapter_index);
352 return;
353 }
354 }
355 /* Init default response including the size field */
356 if (phm->function != HPI_SUBSYS_CREATE_ADAPTER)
357 hpi_init_response(phr, phm->object, phm->function,
358 HPI_ERROR_PROCESSING_MESSAGE);
359
360 switch (phm->type) {
361 case HPI_TYPE_REQUEST:
362 switch (phm->object) {
363 case HPI_OBJ_SUBSYSTEM:
364 subsys_message(phm, phr);
365 break;
366
367 case HPI_OBJ_ADAPTER:
368 phr->size =
369 sizeof(struct hpi_response_header) +
370 sizeof(struct hpi_adapter_res);
371 adapter_message(pao, phm, phr);
372 break;
373
374 case HPI_OBJ_CONTROL:
375 control_message(pao, phm, phr);
376 break;
377
378 case HPI_OBJ_OSTREAM:
379 outstream_message(pao, phm, phr);
380 break;
381
382 case HPI_OBJ_ISTREAM:
383 instream_message(pao, phm, phr);
384 break;
385
386 default:
387 hw_message(pao, phm, phr);
388 break;
389 }
390 break;
391
392 default:
393 phr->error = HPI_ERROR_INVALID_TYPE;
394 break;
395 }
396 }
397
398 /************************************************************************/
399 /* SUBSYSTEM */
400
401 /* create an adapter object and initialise it based on resource information
402 * passed in in the message
403 * NOTE - you cannot use this function AND the FindAdapters function at the
404 * same time, the application must use only one of them to get the adapters
405 */
406 static void subsys_create_adapter(struct hpi_message *phm,
407 struct hpi_response *phr)
408 {
409 /* create temp adapter obj, because we don't know what index yet */
410 struct hpi_adapter_obj ao;
411 struct hpi_adapter_obj *pao;
412 u32 os_error_code;
413 u16 err = 0;
414 u32 dsp_index = 0;
415
416 HPI_DEBUG_LOG(VERBOSE, "subsys_create_adapter\n");
417
418 memset(&ao, 0, sizeof(ao));
419
420 ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
421 if (!ao.priv) {
422 HPI_DEBUG_LOG(ERROR, "can't get mem for adapter object\n");
423 phr->error = HPI_ERROR_MEMORY_ALLOC;
424 return;
425 }
426
427 /* create the adapter object based on the resource information */
428 ao.pci = *phm->u.s.resource.r.pci;
429
430 err = create_adapter_obj(&ao, &os_error_code);
431 if (err) {
432 delete_adapter_obj(&ao);
433 if (err >= HPI_ERROR_BACKEND_BASE) {
434 phr->error = HPI_ERROR_DSP_BOOTLOAD;
435 phr->specific_error = err;
436 } else {
437 phr->error = err;
438 }
439
440 phr->u.s.data = os_error_code;
441 return;
442 }
443 /* need to update paParentAdapter */
444 pao = hpi_find_adapter(ao.index);
445 if (!pao) {
446 /* We just added this adapter, why can't we find it!? */
447 HPI_DEBUG_LOG(ERROR, "lost adapter after boot\n");
448 phr->error = HPI_ERROR_BAD_ADAPTER;
449 return;
450 }
451
452 for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
453 struct hpi_hw_obj *phw = pao->priv;
454 phw->ado[dsp_index].pa_parent_adapter = pao;
455 }
456
457 phr->u.s.adapter_type = ao.type;
458 phr->u.s.adapter_index = ao.index;
459 phr->error = 0;
460 }
461
462 static void adapter_delete(struct hpi_adapter_obj *pao,
463 struct hpi_message *phm, struct hpi_response *phr)
464 {
465 delete_adapter_obj(pao);
466 hpi_delete_adapter(pao);
467 phr->error = 0;
468 }
469
470 /* this routine is called from SubSysFindAdapter and SubSysCreateAdapter */
471 static short create_adapter_obj(struct hpi_adapter_obj *pao,
472 u32 *pos_error_code)
473 {
474 short boot_error = 0;
475 u32 dsp_index = 0;
476 u32 control_cache_size = 0;
477 u32 control_cache_count = 0;
478 struct hpi_hw_obj *phw = pao->priv;
479
480 /* The PCI2040 has the following address map */
481 /* BAR0 - 4K = HPI control and status registers on PCI2040 (HPI CSR) */
482 /* BAR1 - 32K = HPI registers on DSP */
483 phw->dw2040_HPICSR = pao->pci.ap_mem_base[0];
484 phw->dw2040_HPIDSP = pao->pci.ap_mem_base[1];
485 HPI_DEBUG_LOG(VERBOSE, "csr %p, dsp %p\n", phw->dw2040_HPICSR,
486 phw->dw2040_HPIDSP);
487
488 /* set addresses for the possible DSP HPI interfaces */
489 for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
490 phw->ado[dsp_index].prHPI_control =
491 phw->dw2040_HPIDSP + (CONTROL +
492 DSP_SPACING * dsp_index);
493
494 phw->ado[dsp_index].prHPI_address =
495 phw->dw2040_HPIDSP + (ADDRESS +
496 DSP_SPACING * dsp_index);
497 phw->ado[dsp_index].prHPI_data =
498 phw->dw2040_HPIDSP + (DATA + DSP_SPACING * dsp_index);
499
500 phw->ado[dsp_index].prHPI_data_auto_inc =
501 phw->dw2040_HPIDSP + (DATA_AUTOINC +
502 DSP_SPACING * dsp_index);
503
504 HPI_DEBUG_LOG(VERBOSE, "ctl %p, adr %p, dat %p, dat++ %p\n",
505 phw->ado[dsp_index].prHPI_control,
506 phw->ado[dsp_index].prHPI_address,
507 phw->ado[dsp_index].prHPI_data,
508 phw->ado[dsp_index].prHPI_data_auto_inc);
509
510 phw->ado[dsp_index].pa_parent_adapter = pao;
511 }
512
513 phw->pCI2040HPI_error_count = 0;
514 pao->has_control_cache = 0;
515
516 /* Set the default number of DSPs on this card */
517 /* This is (conditionally) adjusted after bootloading */
518 /* of the first DSP in the bootload section. */
519 phw->num_dsp = 1;
520
521 boot_error = hpi6000_adapter_boot_load_dsp(pao, pos_error_code);
522 if (boot_error)
523 return boot_error;
524
525 HPI_DEBUG_LOG(INFO, "bootload DSP OK\n");
526
527 phw->message_buffer_address_on_dsp = 0L;
528 phw->response_buffer_address_on_dsp = 0L;
529
530 /* get info about the adapter by asking the adapter */
531 /* send a HPI_ADAPTER_GET_INFO message */
532 {
533 struct hpi_message hm;
534 struct hpi_response hr0; /* response from DSP 0 */
535 struct hpi_response hr1; /* response from DSP 1 */
536 u16 error = 0;
537
538 HPI_DEBUG_LOG(VERBOSE, "send ADAPTER_GET_INFO\n");
539 memset(&hm, 0, sizeof(hm));
540 hm.type = HPI_TYPE_REQUEST;
541 hm.size = sizeof(struct hpi_message);
542 hm.object = HPI_OBJ_ADAPTER;
543 hm.function = HPI_ADAPTER_GET_INFO;
544 hm.adapter_index = 0;
545 memset(&hr0, 0, sizeof(hr0));
546 memset(&hr1, 0, sizeof(hr1));
547 hr0.size = sizeof(hr0);
548 hr1.size = sizeof(hr1);
549
550 error = hpi6000_message_response_sequence(pao, 0, &hm, &hr0);
551 if (hr0.error) {
552 HPI_DEBUG_LOG(DEBUG, "message error %d\n", hr0.error);
553 return hr0.error;
554 }
555 if (phw->num_dsp == 2) {
556 error = hpi6000_message_response_sequence(pao, 1, &hm,
557 &hr1);
558 if (error)
559 return error;
560 }
561 pao->type = hr0.u.ax.info.adapter_type;
562 pao->index = hr0.u.ax.info.adapter_index;
563 }
564
565 memset(&phw->control_cache[0], 0,
566 sizeof(struct hpi_control_cache_single) *
567 HPI_NMIXER_CONTROLS);
568 /* Read the control cache length to figure out if it is turned on */
569 control_cache_size =
570 hpi_read_word(&phw->ado[0],
571 HPI_HIF_ADDR(control_cache_size_in_bytes));
572 if (control_cache_size) {
573 control_cache_count =
574 hpi_read_word(&phw->ado[0],
575 HPI_HIF_ADDR(control_cache_count));
576
577 phw->p_cache =
578 hpi_alloc_control_cache(control_cache_count,
579 control_cache_size, (unsigned char *)
580 &phw->control_cache[0]
581 );
582 if (phw->p_cache)
583 pao->has_control_cache = 1;
584 }
585
586 HPI_DEBUG_LOG(DEBUG, "get adapter info ASI%04X index %d\n", pao->type,
587 pao->index);
588
589 if (phw->p_cache)
590 phw->p_cache->adap_idx = pao->index;
591
592 return hpi_add_adapter(pao);
593 }
594
595 static void delete_adapter_obj(struct hpi_adapter_obj *pao)
596 {
597 struct hpi_hw_obj *phw = pao->priv;
598
599 if (pao->has_control_cache)
600 hpi_free_control_cache(phw->p_cache);
601
602 /* reset DSPs on adapter */
603 iowrite32(0x0003000F, phw->dw2040_HPICSR + HPI_RESET);
604
605 kfree(phw);
606 }
607
608 /************************************************************************/
609 /* ADAPTER */
610
611 static void adapter_get_asserts(struct hpi_adapter_obj *pao,
612 struct hpi_message *phm, struct hpi_response *phr)
613 {
614 #ifndef HIDE_PCI_ASSERTS
615 /* if we have PCI2040 asserts then collect them */
616 if ((gw_pci_read_asserts > 0) || (gw_pci_write_asserts > 0)) {
617 phr->u.ax.assert.p1 =
618 gw_pci_read_asserts * 100 + gw_pci_write_asserts;
619 phr->u.ax.assert.p2 = 0;
620 phr->u.ax.assert.count = 1; /* assert count */
621 phr->u.ax.assert.dsp_index = -1; /* "dsp index" */
622 strcpy(phr->u.ax.assert.sz_message, "PCI2040 error");
623 phr->u.ax.assert.dsp_msg_addr = 0;
624 gw_pci_read_asserts = 0;
625 gw_pci_write_asserts = 0;
626 phr->error = 0;
627 } else
628 #endif
629 hw_message(pao, phm, phr); /*get DSP asserts */
630
631 return;
632 }
633
634 /************************************************************************/
635 /* LOW-LEVEL */
636
637 static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
638 u32 *pos_error_code)
639 {
640 struct hpi_hw_obj *phw = pao->priv;
641 short error;
642 u32 timeout;
643 u32 read = 0;
644 u32 i = 0;
645 u32 data = 0;
646 u32 j = 0;
647 u32 test_addr = 0x80000000;
648 u32 test_data = 0x00000001;
649 u32 dw2040_reset = 0;
650 u32 dsp_index = 0;
651 u32 endian = 0;
652 u32 adapter_info = 0;
653 u32 delay = 0;
654
655 struct dsp_code dsp_code;
656 u16 boot_load_family = 0;
657
658 /* NOTE don't use wAdapterType in this routine. It is not setup yet */
659
660 switch (pao->pci.pci_dev->subsystem_device) {
661 case 0x5100:
662 case 0x5110: /* ASI5100 revB or higher with C6711D */
663 case 0x5200: /* ASI5200 PCIe version of ASI5100 */
664 case 0x6100:
665 case 0x6200:
666 boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200);
667 break;
668 default:
669 return HPI6000_ERROR_UNHANDLED_SUBSYS_ID;
670 }
671
672 /* reset all DSPs, indicate two DSPs are present
673 * set RST3-=1 to disconnect HAD8 to set DSP in little endian mode
674 */
675 endian = 0;
676 dw2040_reset = 0x0003000F;
677 iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
678
679 /* read back register to make sure PCI2040 chip is functioning
680 * note that bits 4..15 are read-only and so should always return zero,
681 * even though we wrote 1 to them
682 */
683 hpios_delay_micro_seconds(1000);
684 delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
685
686 if (delay != dw2040_reset) {
687 HPI_DEBUG_LOG(ERROR, "INIT_PCI2040 %x %x\n", dw2040_reset,
688 delay);
689 return HPI6000_ERROR_INIT_PCI2040;
690 }
691
692 /* Indicate that DSP#0,1 is a C6X */
693 iowrite32(0x00000003, phw->dw2040_HPICSR + HPI_DATA_WIDTH);
694 /* set Bit30 and 29 - which will prevent Target aborts from being
695 * issued upon HPI or GP error
696 */
697 iowrite32(0x60000000, phw->dw2040_HPICSR + INTERRUPT_MASK_SET);
698
699 /* isolate DSP HAD8 line from PCI2040 so that
700 * Little endian can be set by pullup
701 */
702 dw2040_reset = dw2040_reset & (~(endian << 3));
703 iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
704
705 phw->ado[0].c_dsp_rev = 'B'; /* revB */
706 phw->ado[1].c_dsp_rev = 'B'; /* revB */
707
708 /*Take both DSPs out of reset, setting HAD8 to the correct Endian */
709 dw2040_reset = dw2040_reset & (~0x00000001); /* start DSP 0 */
710 iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
711 dw2040_reset = dw2040_reset & (~0x00000002); /* start DSP 1 */
712 iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
713
714 /* set HAD8 back to PCI2040, now that DSP set to little endian mode */
715 dw2040_reset = dw2040_reset & (~0x00000008);
716 iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
717 /*delay to allow DSP to get going */
718 hpios_delay_micro_seconds(100);
719
720 /* loop through all DSPs, downloading DSP code */
721 for (dsp_index = 0; dsp_index < phw->num_dsp; dsp_index++) {
722 struct dsp_obj *pdo = &phw->ado[dsp_index];
723
724 /* configure DSP so that we download code into the SRAM */
725 /* set control reg for little endian, HWOB=1 */
726 iowrite32(0x00010001, pdo->prHPI_control);
727
728 /* test access to the HPI address register (HPIA) */
729 test_data = 0x00000001;
730 for (j = 0; j < 32; j++) {
731 iowrite32(test_data, pdo->prHPI_address);
732 data = ioread32(pdo->prHPI_address);
733 if (data != test_data) {
734 HPI_DEBUG_LOG(ERROR, "INIT_DSPHPI %x %x %x\n",
735 test_data, data, dsp_index);
736 return HPI6000_ERROR_INIT_DSPHPI;
737 }
738 test_data = test_data << 1;
739 }
740
741 /* if C6713 the setup PLL to generate 225MHz from 25MHz.
742 * Since the PLLDIV1 read is sometimes wrong, even on a C6713,
743 * we're going to do this unconditionally
744 */
745 /* PLLDIV1 should have a value of 8000 after reset */
746 /*
747 if (HpiReadWord(pdo,0x01B7C118) == 0x8000)
748 */
749 {
750 /* C6713 datasheet says we cannot program PLL from HPI,
751 * and indeed if we try to set the PLL multiply from the
752 * HPI, the PLL does not seem to lock,
753 * so we enable the PLL and use the default of x 7
754 */
755 /* bypass PLL */
756 hpi_write_word(pdo, 0x01B7C100, 0x0000);
757 hpios_delay_micro_seconds(100);
758
759 /* ** use default of PLL x7 ** */
760 /* EMIF = 225/3=75MHz */
761 hpi_write_word(pdo, 0x01B7C120, 0x8002);
762 hpios_delay_micro_seconds(100);
763
764 /* peri = 225/2 */
765 hpi_write_word(pdo, 0x01B7C11C, 0x8001);
766 hpios_delay_micro_seconds(100);
767
768 /* cpu = 225/1 */
769 hpi_write_word(pdo, 0x01B7C118, 0x8000);
770
771 /* ~2ms delay */
772 hpios_delay_micro_seconds(2000);
773
774 /* PLL not bypassed */
775 hpi_write_word(pdo, 0x01B7C100, 0x0001);
776 /* ~2ms delay */
777 hpios_delay_micro_seconds(2000);
778 }
779
780 /* test r/w to internal DSP memory
781 * C6711 has L2 cache mapped to 0x0 when reset
782 *
783 * revB - because of bug 3.0.1 last HPI read
784 * (before HPI address issued) must be non-autoinc
785 */
786 /* test each bit in the 32bit word */
787 for (i = 0; i < 100; i++) {
788 test_addr = 0x00000000;
789 test_data = 0x00000001;
790 for (j = 0; j < 32; j++) {
791 hpi_write_word(pdo, test_addr + i, test_data);
792 data = hpi_read_word(pdo, test_addr + i);
793 if (data != test_data) {
794 HPI_DEBUG_LOG(ERROR,
795 "DSP mem %x %x %x %x\n",
796 test_addr + i, test_data,
797 data, dsp_index);
798
799 return HPI6000_ERROR_INIT_DSPINTMEM;
800 }
801 test_data = test_data << 1;
802 }
803 }
804
805 /* memory map of ASI6200
806 00000000-0000FFFF 16Kx32 internal program
807 01800000-019FFFFF Internal peripheral
808 80000000-807FFFFF CE0 2Mx32 SDRAM running @ 100MHz
809 90000000-9000FFFF CE1 Async peripherals:
810
811 EMIF config
812 ------------
813 Global EMIF control
814 0 -
815 1 -
816 2 -
817 3 CLK2EN = 1 CLKOUT2 enabled
818 4 CLK1EN = 0 CLKOUT1 disabled
819 5 EKEN = 1 <--!! C6713 specific, enables ECLKOUT
820 6 -
821 7 NOHOLD = 1 external HOLD disabled
822 8 HOLDA = 0 HOLDA output is low
823 9 HOLD = 0 HOLD input is low
824 10 ARDY = 1 ARDY input is high
825 11 BUSREQ = 0 BUSREQ output is low
826 12,13 Reserved = 1
827 */
828 hpi_write_word(pdo, 0x01800000, 0x34A8);
829
830 /* EMIF CE0 setup - 2Mx32 Sync DRAM
831 31..28 Wr setup
832 27..22 Wr strobe
833 21..20 Wr hold
834 19..16 Rd setup
835 15..14 -
836 13..8 Rd strobe
837 7..4 MTYPE 0011 Sync DRAM 32bits
838 3 Wr hold MSB
839 2..0 Rd hold
840 */
841 hpi_write_word(pdo, 0x01800008, 0x00000030);
842
843 /* EMIF SDRAM Extension
844 31-21 0
845 20 WR2RD = 0
846 19-18 WR2DEAC = 1
847 17 WR2WR = 0
848 16-15 R2WDQM = 2
849 14-12 RD2WR = 4
850 11-10 RD2DEAC = 1
851 9 RD2RD = 1
852 8-7 THZP = 10b
853 6-5 TWR = 2-1 = 01b (tWR = 10ns)
854 4 TRRD = 0b = 2 ECLK (tRRD = 14ns)
855 3-1 TRAS = 5-1 = 100b (Tras=42ns = 5 ECLK)
856 1 CAS latency = 3 ECLK
857 (for Micron 2M32-7 operating at 100Mhz)
858 */
859
860 /* need to use this else DSP code crashes */
861 hpi_write_word(pdo, 0x01800020, 0x001BDF29);
862
863 /* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank)
864 31 - -
865 30 SDBSZ 1 4 bank
866 29..28 SDRSZ 00 11 row address pins
867 27..26 SDCSZ 01 8 column address pins
868 25 RFEN 1 refersh enabled
869 24 INIT 1 init SDRAM
870 23..20 TRCD 0001
871 19..16 TRP 0001
872 15..12 TRC 0110
873 11..0 - -
874 */
875 /* need to use this else DSP code crashes */
876 hpi_write_word(pdo, 0x01800018, 0x47117000);
877
878 /* EMIF SDRAM Refresh Timing */
879 hpi_write_word(pdo, 0x0180001C, 0x00000410);
880
881 /*MIF CE1 setup - Async peripherals
882 @100MHz bus speed, each cycle is 10ns,
883 31..28 Wr setup = 1
884 27..22 Wr strobe = 3 30ns
885 21..20 Wr hold = 1
886 19..16 Rd setup =1
887 15..14 Ta = 2
888 13..8 Rd strobe = 3 30ns
889 7..4 MTYPE 0010 Async 32bits
890 3 Wr hold MSB =0
891 2..0 Rd hold = 1
892 */
893 {
894 u32 cE1 =
895 (1L << 28) | (3L << 22) | (1L << 20) | (1L <<
896 16) | (2L << 14) | (3L << 8) | (2L << 4) | 1L;
897 hpi_write_word(pdo, 0x01800004, cE1);
898 }
899
900 /* delay a little to allow SDRAM and DSP to "get going" */
901 hpios_delay_micro_seconds(1000);
902
903 /* test access to SDRAM */
904 {
905 test_addr = 0x80000000;
906 test_data = 0x00000001;
907 /* test each bit in the 32bit word */
908 for (j = 0; j < 32; j++) {
909 hpi_write_word(pdo, test_addr, test_data);
910 data = hpi_read_word(pdo, test_addr);
911 if (data != test_data) {
912 HPI_DEBUG_LOG(ERROR,
913 "DSP dram %x %x %x %x\n",
914 test_addr, test_data, data,
915 dsp_index);
916
917 return HPI6000_ERROR_INIT_SDRAM1;
918 }
919 test_data = test_data << 1;
920 }
921 /* test every Nth address in the DRAM */
922 #define DRAM_SIZE_WORDS 0x200000 /*2_mx32 */
923 #define DRAM_INC 1024
924 test_addr = 0x80000000;
925 test_data = 0x0;
926 for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
927 hpi_write_word(pdo, test_addr + i, test_data);
928 test_data++;
929 }
930 test_addr = 0x80000000;
931 test_data = 0x0;
932 for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
933 data = hpi_read_word(pdo, test_addr + i);
934 if (data != test_data) {
935 HPI_DEBUG_LOG(ERROR,
936 "DSP dram %x %x %x %x\n",
937 test_addr + i, test_data,
938 data, dsp_index);
939 return HPI6000_ERROR_INIT_SDRAM2;
940 }
941 test_data++;
942 }
943
944 }
945
946 /* write the DSP code down into the DSPs memory */
947 error = hpi_dsp_code_open(boot_load_family, pao->pci.pci_dev,
948 &dsp_code, pos_error_code);
949
950 if (error)
951 return error;
952
953 while (1) {
954 u32 length;
955 u32 address;
956 u32 type;
957 u32 *pcode;
958
959 error = hpi_dsp_code_read_word(&dsp_code, &length);
960 if (error)
961 break;
962 if (length == 0xFFFFFFFF)
963 break; /* end of code */
964
965 error = hpi_dsp_code_read_word(&dsp_code, &address);
966 if (error)
967 break;
968 error = hpi_dsp_code_read_word(&dsp_code, &type);
969 if (error)
970 break;
971 error = hpi_dsp_code_read_block(length, &dsp_code,
972 &pcode);
973 if (error)
974 break;
975 error = hpi6000_dsp_block_write32(pao, (u16)dsp_index,
976 address, pcode, length);
977 if (error)
978 break;
979 }
980
981 if (error) {
982 hpi_dsp_code_close(&dsp_code);
983 return error;
984 }
985 /* verify that code was written correctly */
986 /* this time through, assume no errors in DSP code file/array */
987 hpi_dsp_code_rewind(&dsp_code);
988 while (1) {
989 u32 length;
990 u32 address;
991 u32 type;
992 u32 *pcode;
993
994 hpi_dsp_code_read_word(&dsp_code, &length);
995 if (length == 0xFFFFFFFF)
996 break; /* end of code */
997
998 hpi_dsp_code_read_word(&dsp_code, &address);
999 hpi_dsp_code_read_word(&dsp_code, &type);
1000 hpi_dsp_code_read_block(length, &dsp_code, &pcode);
1001
1002 for (i = 0; i < length; i++) {
1003 data = hpi_read_word(pdo, address);
1004 if (data != *pcode) {
1005 error = HPI6000_ERROR_INIT_VERIFY;
1006 HPI_DEBUG_LOG(ERROR,
1007 "DSP verify %x %x %x %x\n",
1008 address, *pcode, data,
1009 dsp_index);
1010 break;
1011 }
1012 pcode++;
1013 address += 4;
1014 }
1015 if (error)
1016 break;
1017 }
1018 hpi_dsp_code_close(&dsp_code);
1019 if (error)
1020 return error;
1021
1022 /* zero out the hostmailbox */
1023 {
1024 u32 address = HPI_HIF_ADDR(host_cmd);
1025 for (i = 0; i < 4; i++) {
1026 hpi_write_word(pdo, address, 0);
1027 address += 4;
1028 }
1029 }
1030 /* write the DSP number into the hostmailbox */
1031 /* structure before starting the DSP */
1032 hpi_write_word(pdo, HPI_HIF_ADDR(dsp_number), dsp_index);
1033
1034 /* write the DSP adapter Info into the */
1035 /* hostmailbox before starting the DSP */
1036 if (dsp_index > 0)
1037 hpi_write_word(pdo, HPI_HIF_ADDR(adapter_info),
1038 adapter_info);
1039
1040 /* step 3. Start code by sending interrupt */
1041 iowrite32(0x00030003, pdo->prHPI_control);
1042 hpios_delay_micro_seconds(10000);
1043
1044 /* wait for a non-zero value in hostcmd -
1045 * indicating initialization is complete
1046 *
1047 * Init could take a while if DSP checks SDRAM memory
1048 * Was 200000. Increased to 2000000 for ASI8801 so we
1049 * don't get 938 errors.
1050 */
1051 timeout = 2000000;
1052 while (timeout) {
1053 do {
1054 read = hpi_read_word(pdo,
1055 HPI_HIF_ADDR(host_cmd));
1056 } while (--timeout
1057 && hpi6000_check_PCI2040_error_flag(pao,
1058 H6READ));
1059
1060 if (read)
1061 break;
1062 /* The following is a workaround for bug #94:
1063 * Bluescreen on install and subsequent boots on a
1064 * DELL PowerEdge 600SC PC with 1.8GHz P4 and
1065 * ServerWorks chipset. Without this delay the system
1066 * locks up with a bluescreen (NOT GPF or pagefault).
1067 */
1068 else
1069 hpios_delay_micro_seconds(10000);
1070 }
1071 if (timeout == 0)
1072 return HPI6000_ERROR_INIT_NOACK;
1073
1074 /* read the DSP adapter Info from the */
1075 /* hostmailbox structure after starting the DSP */
1076 if (dsp_index == 0) {
1077 /*u32 dwTestData=0; */
1078 u32 mask = 0;
1079
1080 adapter_info =
1081 hpi_read_word(pdo,
1082 HPI_HIF_ADDR(adapter_info));
1083 if (HPI_ADAPTER_FAMILY_ASI
1084 (HPI_HIF_ADAPTER_INFO_EXTRACT_ADAPTER
1085 (adapter_info)) ==
1086 HPI_ADAPTER_FAMILY_ASI(0x6200))
1087 /* all 6200 cards have this many DSPs */
1088 phw->num_dsp = 2;
1089
1090 /* test that the PLD is programmed */
1091 /* and we can read/write 24bits */
1092 #define PLD_BASE_ADDRESS 0x90000000L /*for ASI6100/6200/8800 */
1093
1094 switch (boot_load_family) {
1095 case HPI_ADAPTER_FAMILY_ASI(0x6200):
1096 /* ASI6100/6200 has 24bit path to FPGA */
1097 mask = 0xFFFFFF00L;
1098 /* ASI5100 uses AX6 code, */
1099 /* but has no PLD r/w register to test */
1100 if (HPI_ADAPTER_FAMILY_ASI(pao->pci.pci_dev->
1101 subsystem_device) ==
1102 HPI_ADAPTER_FAMILY_ASI(0x5100))
1103 mask = 0x00000000L;
1104 /* ASI5200 uses AX6 code, */
1105 /* but has no PLD r/w register to test */
1106 if (HPI_ADAPTER_FAMILY_ASI(pao->pci.pci_dev->
1107 subsystem_device) ==
1108 HPI_ADAPTER_FAMILY_ASI(0x5200))
1109 mask = 0x00000000L;
1110 break;
1111 case HPI_ADAPTER_FAMILY_ASI(0x8800):
1112 /* ASI8800 has 16bit path to FPGA */
1113 mask = 0xFFFF0000L;
1114 break;
1115 }
1116 test_data = 0xAAAAAA00L & mask;
1117 /* write to 24 bit Debug register (D31-D8) */
1118 hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
1119 read = hpi_read_word(pdo,
1120 PLD_BASE_ADDRESS + 4L) & mask;
1121 if (read != test_data) {
1122 HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
1123 read);
1124 return HPI6000_ERROR_INIT_PLDTEST1;
1125 }
1126 test_data = 0x55555500L & mask;
1127 hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
1128 read = hpi_read_word(pdo,
1129 PLD_BASE_ADDRESS + 4L) & mask;
1130 if (read != test_data) {
1131 HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
1132 read);
1133 return HPI6000_ERROR_INIT_PLDTEST2;
1134 }
1135 }
1136 } /* for numDSP */
1137 return 0;
1138 }
1139
1140 #define PCI_TIMEOUT 100
1141
1142 static int hpi_set_address(struct dsp_obj *pdo, u32 address)
1143 {
1144 u32 timeout = PCI_TIMEOUT;
1145
1146 do {
1147 iowrite32(address, pdo->prHPI_address);
1148 } while (hpi6000_check_PCI2040_error_flag(pdo->pa_parent_adapter,
1149 H6WRITE)
1150 && --timeout);
1151
1152 if (timeout)
1153 return 0;
1154
1155 return 1;
1156 }
1157
1158 /* write one word to the HPI port */
1159 static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data)
1160 {
1161 if (hpi_set_address(pdo, address))
1162 return;
1163 iowrite32(data, pdo->prHPI_data);
1164 }
1165
1166 /* read one word from the HPI port */
1167 static u32 hpi_read_word(struct dsp_obj *pdo, u32 address)
1168 {
1169 u32 data = 0;
1170
1171 if (hpi_set_address(pdo, address))
1172 return 0; /*? No way to return error */
1173
1174 /* take care of errata in revB DSP (2.0.1) */
1175 data = ioread32(pdo->prHPI_data);
1176 return data;
1177 }
1178
1179 /* write a block of 32bit words to the DSP HPI port using auto-inc mode */
1180 static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
1181 u32 length)
1182 {
1183 u16 length16 = length - 1;
1184
1185 if (length == 0)
1186 return;
1187
1188 if (hpi_set_address(pdo, address))
1189 return;
1190
1191 iowrite32_rep(pdo->prHPI_data_auto_inc, pdata, length16);
1192
1193 /* take care of errata in revB DSP (2.0.1) */
1194 /* must end with non auto-inc */
1195 iowrite32(*(pdata + length - 1), pdo->prHPI_data);
1196 }
1197
1198 /** read a block of 32bit words from the DSP HPI port using auto-inc mode
1199 */
1200 static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
1201 u32 length)
1202 {
1203 u16 length16 = length - 1;
1204
1205 if (length == 0)
1206 return;
1207
1208 if (hpi_set_address(pdo, address))
1209 return;
1210
1211 ioread32_rep(pdo->prHPI_data_auto_inc, pdata, length16);
1212
1213 /* take care of errata in revB DSP (2.0.1) */
1214 /* must end with non auto-inc */
1215 *(pdata + length - 1) = ioread32(pdo->prHPI_data);
1216 }
1217
1218 static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
1219 u16 dsp_index, u32 hpi_address, u32 *source, u32 count)
1220 {
1221 struct hpi_hw_obj *phw = pao->priv;
1222 struct dsp_obj *pdo = &phw->ado[dsp_index];
1223 u32 time_out = PCI_TIMEOUT;
1224 int c6711_burst_size = 128;
1225 u32 local_hpi_address = hpi_address;
1226 int local_count = count;
1227 int xfer_size;
1228 u32 *pdata = source;
1229
1230 while (local_count) {
1231 if (local_count > c6711_burst_size)
1232 xfer_size = c6711_burst_size;
1233 else
1234 xfer_size = local_count;
1235
1236 time_out = PCI_TIMEOUT;
1237 do {
1238 hpi_write_block(pdo, local_hpi_address, pdata,
1239 xfer_size);
1240 } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
1241 && --time_out);
1242
1243 if (!time_out)
1244 break;
1245 pdata += xfer_size;
1246 local_hpi_address += sizeof(u32) * xfer_size;
1247 local_count -= xfer_size;
1248 }
1249
1250 if (time_out)
1251 return 0;
1252 else
1253 return 1;
1254 }
1255
1256 static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
1257 u16 dsp_index, u32 hpi_address, u32 *dest, u32 count)
1258 {
1259 struct hpi_hw_obj *phw = pao->priv;
1260 struct dsp_obj *pdo = &phw->ado[dsp_index];
1261 u32 time_out = PCI_TIMEOUT;
1262 int c6711_burst_size = 16;
1263 u32 local_hpi_address = hpi_address;
1264 int local_count = count;
1265 int xfer_size;
1266 u32 *pdata = dest;
1267 u32 loop_count = 0;
1268
1269 while (local_count) {
1270 if (local_count > c6711_burst_size)
1271 xfer_size = c6711_burst_size;
1272 else
1273 xfer_size = local_count;
1274
1275 time_out = PCI_TIMEOUT;
1276 do {
1277 hpi_read_block(pdo, local_hpi_address, pdata,
1278 xfer_size);
1279 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1280 && --time_out);
1281 if (!time_out)
1282 break;
1283
1284 pdata += xfer_size;
1285 local_hpi_address += sizeof(u32) * xfer_size;
1286 local_count -= xfer_size;
1287 loop_count++;
1288 }
1289
1290 if (time_out)
1291 return 0;
1292 else
1293 return 1;
1294 }
1295
1296 static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
1297 u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr)
1298 {
1299 struct hpi_hw_obj *phw = pao->priv;
1300 struct dsp_obj *pdo = &phw->ado[dsp_index];
1301 u32 timeout;
1302 u16 ack;
1303 u32 address;
1304 u32 length;
1305 u32 *p_data;
1306 u16 error = 0;
1307
1308 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
1309 if (ack & HPI_HIF_ERROR_MASK) {
1310 pao->dsp_crashed++;
1311 return HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT;
1312 }
1313 pao->dsp_crashed = 0;
1314
1315 /* get the message address and size */
1316 if (phw->message_buffer_address_on_dsp == 0) {
1317 timeout = TIMEOUT;
1318 do {
1319 address =
1320 hpi_read_word(pdo,
1321 HPI_HIF_ADDR(message_buffer_address));
1322 phw->message_buffer_address_on_dsp = address;
1323 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1324 && --timeout);
1325 if (!timeout)
1326 return HPI6000_ERROR_MSG_GET_ADR;
1327 } else
1328 address = phw->message_buffer_address_on_dsp;
1329
1330 length = phm->size;
1331
1332 /* send the message */
1333 p_data = (u32 *)phm;
1334 if (hpi6000_dsp_block_write32(pao, dsp_index, address, p_data,
1335 (u16)length / 4))
1336 return HPI6000_ERROR_MSG_RESP_BLOCKWRITE32;
1337
1338 if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_GET_RESP))
1339 return HPI6000_ERROR_MSG_RESP_GETRESPCMD;
1340 hpi6000_send_dsp_interrupt(pdo);
1341
1342 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_RESP);
1343 if (ack & HPI_HIF_ERROR_MASK)
1344 return HPI6000_ERROR_MSG_RESP_GET_RESP_ACK;
1345
1346 /* get the response address */
1347 if (phw->response_buffer_address_on_dsp == 0) {
1348 timeout = TIMEOUT;
1349 do {
1350 address =
1351 hpi_read_word(pdo,
1352 HPI_HIF_ADDR(response_buffer_address));
1353 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1354 && --timeout);
1355 phw->response_buffer_address_on_dsp = address;
1356
1357 if (!timeout)
1358 return HPI6000_ERROR_RESP_GET_ADR;
1359 } else
1360 address = phw->response_buffer_address_on_dsp;
1361
1362 /* read the length of the response back from the DSP */
1363 timeout = TIMEOUT;
1364 do {
1365 length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
1366 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
1367 if (!timeout)
1368 return HPI6000_ERROR_RESP_GET_LEN;
1369
1370 if (length > phr->size)
1371 return HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL;
1372
1373 /* get the response */
1374 p_data = (u32 *)phr;
1375 if (hpi6000_dsp_block_read32(pao, dsp_index, address, p_data,
1376 (u16)length / 4))
1377 return HPI6000_ERROR_MSG_RESP_BLOCKREAD32;
1378
1379 /* set i/f back to idle */
1380 if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
1381 return HPI6000_ERROR_MSG_RESP_IDLECMD;
1382 hpi6000_send_dsp_interrupt(pdo);
1383
1384 error = hpi_validate_response(phm, phr);
1385 return error;
1386 }
1387
1388 /* have to set up the below defines to match stuff in the MAP file */
1389
1390 #define MSG_ADDRESS (HPI_HIF_BASE+0x18)
1391 #define MSG_LENGTH 11
1392 #define RESP_ADDRESS (HPI_HIF_BASE+0x44)
1393 #define RESP_LENGTH 16
1394 #define QUEUE_START (HPI_HIF_BASE+0x88)
1395 #define QUEUE_SIZE 0x8000
1396
1397 static short hpi6000_send_data_check_adr(u32 address, u32 length_in_dwords)
1398 {
1399 /*#define CHECKING // comment this line in to enable checking */
1400 #ifdef CHECKING
1401 if (address < (u32)MSG_ADDRESS)
1402 return 0;
1403 if (address > (u32)(QUEUE_START + QUEUE_SIZE))
1404 return 0;
1405 if ((address + (length_in_dwords << 2)) >
1406 (u32)(QUEUE_START + QUEUE_SIZE))
1407 return 0;
1408 #else
1409 (void)address;
1410 (void)length_in_dwords;
1411 return 1;
1412 #endif
1413 }
1414
1415 static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
1416 struct hpi_message *phm, struct hpi_response *phr)
1417 {
1418 struct hpi_hw_obj *phw = pao->priv;
1419 struct dsp_obj *pdo = &phw->ado[dsp_index];
1420 u32 data_sent = 0;
1421 u16 ack;
1422 u32 length, address;
1423 u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
1424 u16 time_out = 8;
1425
1426 (void)phr;
1427
1428 /* round dwDataSize down to nearest 4 bytes */
1429 while ((data_sent < (phm->u.d.u.data.data_size & ~3L))
1430 && --time_out) {
1431 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
1432 if (ack & HPI_HIF_ERROR_MASK)
1433 return HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT;
1434
1435 if (hpi6000_send_host_command(pao, dsp_index,
1436 HPI_HIF_SEND_DATA))
1437 return HPI6000_ERROR_SEND_DATA_CMD;
1438
1439 hpi6000_send_dsp_interrupt(pdo);
1440
1441 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_SEND_DATA);
1442
1443 if (ack & HPI_HIF_ERROR_MASK)
1444 return HPI6000_ERROR_SEND_DATA_ACK;
1445
1446 do {
1447 /* get the address and size */
1448 address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
1449 /* DSP returns number of DWORDS */
1450 length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
1451 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ));
1452
1453 if (!hpi6000_send_data_check_adr(address, length))
1454 return HPI6000_ERROR_SEND_DATA_ADR;
1455
1456 /* send the data. break data into 512 DWORD blocks (2K bytes)
1457 * and send using block write. 2Kbytes is the max as this is the
1458 * memory window given to the HPI data register by the PCI2040
1459 */
1460
1461 {
1462 u32 len = length;
1463 u32 blk_len = 512;
1464 while (len) {
1465 if (len < blk_len)
1466 blk_len = len;
1467 if (hpi6000_dsp_block_write32(pao, dsp_index,
1468 address, p_data, blk_len))
1469 return HPI6000_ERROR_SEND_DATA_WRITE;
1470 address += blk_len * 4;
1471 p_data += blk_len;
1472 len -= blk_len;
1473 }
1474 }
1475
1476 if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
1477 return HPI6000_ERROR_SEND_DATA_IDLECMD;
1478
1479 hpi6000_send_dsp_interrupt(pdo);
1480
1481 data_sent += length * 4;
1482 }
1483 if (!time_out)
1484 return HPI6000_ERROR_SEND_DATA_TIMEOUT;
1485 return 0;
1486 }
1487
1488 static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
1489 struct hpi_message *phm, struct hpi_response *phr)
1490 {
1491 struct hpi_hw_obj *phw = pao->priv;
1492 struct dsp_obj *pdo = &phw->ado[dsp_index];
1493 u32 data_got = 0;
1494 u16 ack;
1495 u32 length, address;
1496 u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
1497
1498 (void)phr; /* this parameter not used! */
1499
1500 /* round dwDataSize down to nearest 4 bytes */
1501 while (data_got < (phm->u.d.u.data.data_size & ~3L)) {
1502 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
1503 if (ack & HPI_HIF_ERROR_MASK)
1504 return HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT;
1505
1506 if (hpi6000_send_host_command(pao, dsp_index,
1507 HPI_HIF_GET_DATA))
1508 return HPI6000_ERROR_GET_DATA_CMD;
1509 hpi6000_send_dsp_interrupt(pdo);
1510
1511 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_DATA);
1512
1513 if (ack & HPI_HIF_ERROR_MASK)
1514 return HPI6000_ERROR_GET_DATA_ACK;
1515
1516 /* get the address and size */
1517 do {
1518 address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
1519 length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
1520 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ));
1521
1522 /* read the data */
1523 {
1524 u32 len = length;
1525 u32 blk_len = 512;
1526 while (len) {
1527 if (len < blk_len)
1528 blk_len = len;
1529 if (hpi6000_dsp_block_read32(pao, dsp_index,
1530 address, p_data, blk_len))
1531 return HPI6000_ERROR_GET_DATA_READ;
1532 address += blk_len * 4;
1533 p_data += blk_len;
1534 len -= blk_len;
1535 }
1536 }
1537
1538 if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
1539 return HPI6000_ERROR_GET_DATA_IDLECMD;
1540 hpi6000_send_dsp_interrupt(pdo);
1541
1542 data_got += length * 4;
1543 }
1544 return 0;
1545 }
1546
1547 static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo)
1548 {
1549 iowrite32(0x00030003, pdo->prHPI_control); /* DSPINT */
1550 }
1551
1552 static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
1553 u16 dsp_index, u32 host_cmd)
1554 {
1555 struct hpi_hw_obj *phw = pao->priv;
1556 struct dsp_obj *pdo = &phw->ado[dsp_index];
1557 u32 timeout = TIMEOUT;
1558
1559 /* set command */
1560 do {
1561 hpi_write_word(pdo, HPI_HIF_ADDR(host_cmd), host_cmd);
1562 /* flush the FIFO */
1563 hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
1564 } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) && --timeout);
1565
1566 /* reset the interrupt bit */
1567 iowrite32(0x00040004, pdo->prHPI_control);
1568
1569 if (timeout)
1570 return 0;
1571 else
1572 return 1;
1573 }
1574
1575 /* if the PCI2040 has recorded an HPI timeout, reset the error and return 1 */
1576 static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
1577 u16 read_or_write)
1578 {
1579 u32 hPI_error;
1580
1581 struct hpi_hw_obj *phw = pao->priv;
1582
1583 /* read the error bits from the PCI2040 */
1584 hPI_error = ioread32(phw->dw2040_HPICSR + HPI_ERROR_REPORT);
1585 if (hPI_error) {
1586 /* reset the error flag */
1587 iowrite32(0L, phw->dw2040_HPICSR + HPI_ERROR_REPORT);
1588 phw->pCI2040HPI_error_count++;
1589 if (read_or_write == 1)
1590 gw_pci_read_asserts++; /************* inc global */
1591 else
1592 gw_pci_write_asserts++;
1593 return 1;
1594 } else
1595 return 0;
1596 }
1597
1598 static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
1599 u32 ack_value)
1600 {
1601 struct hpi_hw_obj *phw = pao->priv;
1602 struct dsp_obj *pdo = &phw->ado[dsp_index];
1603 u32 ack = 0L;
1604 u32 timeout;
1605 u32 hPIC = 0L;
1606
1607 /* wait for host interrupt to signal ack is ready */
1608 timeout = TIMEOUT;
1609 while (--timeout) {
1610 hPIC = ioread32(pdo->prHPI_control);
1611 if (hPIC & 0x04) /* 0x04 = HINT from DSP */
1612 break;
1613 }
1614 if (timeout == 0)
1615 return HPI_HIF_ERROR_MASK;
1616
1617 /* wait for dwAckValue */
1618 timeout = TIMEOUT;
1619 while (--timeout) {
1620 /* read the ack mailbox */
1621 ack = hpi_read_word(pdo, HPI_HIF_ADDR(dsp_ack));
1622 if (ack == ack_value)
1623 break;
1624 if ((ack & HPI_HIF_ERROR_MASK)
1625 && !hpi6000_check_PCI2040_error_flag(pao, H6READ))
1626 break;
1627 /*for (i=0;i<1000;i++) */
1628 /* dwPause=i+1; */
1629 }
1630 if (ack & HPI_HIF_ERROR_MASK)
1631 /* indicates bad read from DSP -
1632 typically 0xffffff is read for some reason */
1633 ack = HPI_HIF_ERROR_MASK;
1634
1635 if (timeout == 0)
1636 ack = HPI_HIF_ERROR_MASK;
1637 return (short)ack;
1638 }
1639
1640 static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
1641 struct hpi_message *phm)
1642 {
1643 const u16 dsp_index = 0;
1644 struct hpi_hw_obj *phw = pao->priv;
1645 struct dsp_obj *pdo = &phw->ado[dsp_index];
1646 u32 timeout;
1647 u32 cache_dirty_flag;
1648 u16 err;
1649
1650 hpios_dsplock_lock(pao);
1651
1652 timeout = TIMEOUT;
1653 do {
1654 cache_dirty_flag =
1655 hpi_read_word((struct dsp_obj *)pdo,
1656 HPI_HIF_ADDR(control_cache_is_dirty));
1657 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
1658 if (!timeout) {
1659 err = HPI6000_ERROR_CONTROL_CACHE_PARAMS;
1660 goto unlock;
1661 }
1662
1663 if (cache_dirty_flag) {
1664 /* read the cached controls */
1665 u32 address;
1666 u32 length;
1667
1668 timeout = TIMEOUT;
1669 if (pdo->control_cache_address_on_dsp == 0) {
1670 do {
1671 address =
1672 hpi_read_word((struct dsp_obj *)pdo,
1673 HPI_HIF_ADDR(control_cache_address));
1674
1675 length = hpi_read_word((struct dsp_obj *)pdo,
1676 HPI_HIF_ADDR
1677 (control_cache_size_in_bytes));
1678 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1679 && --timeout);
1680 if (!timeout) {
1681 err = HPI6000_ERROR_CONTROL_CACHE_ADDRLEN;
1682 goto unlock;
1683 }
1684 pdo->control_cache_address_on_dsp = address;
1685 pdo->control_cache_length_on_dsp = length;
1686 } else {
1687 address = pdo->control_cache_address_on_dsp;
1688 length = pdo->control_cache_length_on_dsp;
1689 }
1690
1691 if (hpi6000_dsp_block_read32(pao, dsp_index, address,
1692 (u32 *)&phw->control_cache[0],
1693 length / sizeof(u32))) {
1694 err = HPI6000_ERROR_CONTROL_CACHE_READ;
1695 goto unlock;
1696 }
1697 do {
1698 hpi_write_word((struct dsp_obj *)pdo,
1699 HPI_HIF_ADDR(control_cache_is_dirty), 0);
1700 /* flush the FIFO */
1701 hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
1702 } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
1703 && --timeout);
1704 if (!timeout) {
1705 err = HPI6000_ERROR_CONTROL_CACHE_FLUSH;
1706 goto unlock;
1707 }
1708
1709 }
1710 err = 0;
1711
1712 unlock:
1713 hpios_dsplock_unlock(pao);
1714 return err;
1715 }
1716
1717 /** Get dsp index for multi DSP adapters only */
1718 static u16 get_dsp_index(struct hpi_adapter_obj *pao, struct hpi_message *phm)
1719 {
1720 u16 ret = 0;
1721 switch (phm->object) {
1722 case HPI_OBJ_ISTREAM:
1723 if (phm->obj_index < 2)
1724 ret = 1;
1725 break;
1726 case HPI_OBJ_PROFILE:
1727 ret = phm->obj_index;
1728 break;
1729 default:
1730 break;
1731 }
1732 return ret;
1733 }
1734
1735 /** Complete transaction with DSP
1736
1737 Send message, get response, send or get stream data if any.
1738 */
1739 static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
1740 struct hpi_response *phr)
1741 {
1742 u16 error = 0;
1743 u16 dsp_index = 0;
1744 struct hpi_hw_obj *phw = pao->priv;
1745 u16 num_dsp = phw->num_dsp;
1746
1747 if (num_dsp < 2)
1748 dsp_index = 0;
1749 else {
1750 dsp_index = get_dsp_index(pao, phm);
1751
1752 /* is this checked on the DSP anyway? */
1753 if ((phm->function == HPI_ISTREAM_GROUP_ADD)
1754 || (phm->function == HPI_OSTREAM_GROUP_ADD)) {
1755 struct hpi_message hm;
1756 u16 add_index;
1757 hm.obj_index = phm->u.d.u.stream.stream_index;
1758 hm.object = phm->u.d.u.stream.object_type;
1759 add_index = get_dsp_index(pao, &hm);
1760 if (add_index != dsp_index) {
1761 phr->error = HPI_ERROR_NO_INTERDSP_GROUPS;
1762 return;
1763 }
1764 }
1765 }
1766
1767 hpios_dsplock_lock(pao);
1768 error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr);
1769
1770 if (error) /* something failed in the HPI/DSP interface */
1771 goto err;
1772
1773 if (phr->error) /* something failed in the DSP */
1774 goto out;
1775
1776 switch (phm->function) {
1777 case HPI_OSTREAM_WRITE:
1778 case HPI_ISTREAM_ANC_WRITE:
1779 error = hpi6000_send_data(pao, dsp_index, phm, phr);
1780 break;
1781 case HPI_ISTREAM_READ:
1782 case HPI_OSTREAM_ANC_READ:
1783 error = hpi6000_get_data(pao, dsp_index, phm, phr);
1784 break;
1785 case HPI_ADAPTER_GET_ASSERT:
1786 phr->u.ax.assert.dsp_index = 0; /* dsp 0 default */
1787 if (num_dsp == 2) {
1788 if (!phr->u.ax.assert.count) {
1789 /* no assert from dsp 0, check dsp 1 */
1790 error = hpi6000_message_response_sequence(pao,
1791 1, phm, phr);
1792 phr->u.ax.assert.dsp_index = 1;
1793 }
1794 }
1795 }
1796
1797 err:
1798 if (error) {
1799 if (error >= HPI_ERROR_BACKEND_BASE) {
1800 phr->error = HPI_ERROR_DSP_COMMUNICATION;
1801 phr->specific_error = error;
1802 } else {
1803 phr->error = error;
1804 }
1805
1806 /* just the header of the response is valid */
1807 phr->size = sizeof(struct hpi_response_header);
1808 }
1809 out:
1810 hpios_dsplock_unlock(pao);
1811 return;
1812 }
Linux with added FPC-III support