?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Staging: strip: delete the driver
[linux/fpc-iii.git] / drivers / hwmon / abituguru3.c
blob3cf28af614b55cd894e7318c73b5d21ec3a27e27
1 /*
2 abituguru3.c
3
4 Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
5 Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21 /*
22 This driver supports the sensor part of revision 3 of the custom Abit uGuru
23 chip found on newer Abit uGuru motherboards. Note: because of lack of specs
24 only reading the sensors and their settings is supported.
25 */
26 #include <linux/module.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/jiffies.h>
30 #include <linux/mutex.h>
31 #include <linux/err.h>
32 #include <linux/delay.h>
33 #include <linux/platform_device.h>
34 #include <linux/hwmon.h>
35 #include <linux/hwmon-sysfs.h>
36 #include <linux/dmi.h>
37 #include <linux/io.h>
38
39 /* uGuru3 bank addresses */
40 #define ABIT_UGURU3_SETTINGS_BANK 0x01
41 #define ABIT_UGURU3_SENSORS_BANK 0x08
42 #define ABIT_UGURU3_MISC_BANK 0x09
43 #define ABIT_UGURU3_ALARMS_START 0x1E
44 #define ABIT_UGURU3_SETTINGS_START 0x24
45 #define ABIT_UGURU3_VALUES_START 0x80
46 #define ABIT_UGURU3_BOARD_ID 0x0A
47 /* uGuru3 sensor bank flags */ /* Alarm if: */
48 #define ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE 0x01 /* temp over warn */
49 #define ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE 0x02 /* volt over max */
50 #define ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE 0x04 /* volt under min */
51 #define ABIT_UGURU3_TEMP_HIGH_ALARM_FLAG 0x10 /* temp is over warn */
52 #define ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG 0x20 /* volt is over max */
53 #define ABIT_UGURU3_VOLT_LOW_ALARM_FLAG 0x40 /* volt is under min */
54 #define ABIT_UGURU3_FAN_LOW_ALARM_ENABLE 0x01 /* fan under min */
55 #define ABIT_UGURU3_BEEP_ENABLE 0x08 /* beep if alarm */
56 #define ABIT_UGURU3_SHUTDOWN_ENABLE 0x80 /* shutdown if alarm */
57 /* sensor types */
58 #define ABIT_UGURU3_IN_SENSOR 0
59 #define ABIT_UGURU3_TEMP_SENSOR 1
60 #define ABIT_UGURU3_FAN_SENSOR 2
61
62 /* Timeouts / Retries, if these turn out to need a lot of fiddling we could
63 convert them to params. Determined by trial and error. I assume this is
64 cpu-speed independent, since the ISA-bus and not the CPU should be the
65 bottleneck. */
66 #define ABIT_UGURU3_WAIT_TIMEOUT 250
67 /* Normally the 0xAC at the end of synchronize() is reported after the
68 first read, but sometimes not and we need to poll */
69 #define ABIT_UGURU3_SYNCHRONIZE_TIMEOUT 5
70 /* utility macros */
71 #define ABIT_UGURU3_NAME "abituguru3"
72 #define ABIT_UGURU3_DEBUG(format, arg...) \
73 if (verbose) \
74 printk(KERN_DEBUG ABIT_UGURU3_NAME ": " format , ## arg)
75
76 /* Macros to help calculate the sysfs_names array length */
77 #define ABIT_UGURU3_MAX_NO_SENSORS 26
78 /* sum of strlen +1 of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0,
79 in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0, in??_label\0 */
80 #define ABIT_UGURU3_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14 + 11)
81 /* sum of strlen +1 of: temp??_input\0, temp??_max\0, temp??_crit\0,
82 temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0,
83 temp??_label\0 */
84 #define ABIT_UGURU3_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16 + 13)
85 /* sum of strlen +1 of: fan??_input\0, fan??_min\0, fan??_alarm\0,
86 fan??_alarm_enable\0, fan??_beep\0, fan??_shutdown\0, fan??_label\0 */
87 #define ABIT_UGURU3_FAN_NAMES_LENGTH (12 + 10 + 12 + 19 + 11 + 15 + 12)
88 /* Worst case scenario 16 in sensors (longest names_length) and the rest
89 temp sensors (second longest names_length). */
90 #define ABIT_UGURU3_SYSFS_NAMES_LENGTH (16 * ABIT_UGURU3_IN_NAMES_LENGTH + \
91 (ABIT_UGURU3_MAX_NO_SENSORS - 16) * ABIT_UGURU3_TEMP_NAMES_LENGTH)
92
93 /* All the macros below are named identical to the openguru2 program
94 reverse engineered by Louis Kruger, hence the names might not be 100%
95 logical. I could come up with better names, but I prefer keeping the names
96 identical so that this driver can be compared with his work more easily. */
97 /* Two i/o-ports are used by uGuru */
98 #define ABIT_UGURU3_BASE 0x00E0
99 #define ABIT_UGURU3_CMD 0x00
100 #define ABIT_UGURU3_DATA 0x04
101 #define ABIT_UGURU3_REGION_LENGTH 5
102 /* The wait_xxx functions return this on success and the last contents
103 of the DATA register (0-255) on failure. */
104 #define ABIT_UGURU3_SUCCESS -1
105 /* uGuru status flags */
106 #define ABIT_UGURU3_STATUS_READY_FOR_READ 0x01
107 #define ABIT_UGURU3_STATUS_BUSY 0x02
108
109
110 /* Structures */
111 struct abituguru3_sensor_info {
112 const char* name;
113 int port;
114 int type;
115 int multiplier;
116 int divisor;
117 int offset;
118 };
119
120 /* Avoid use of flexible array members */
121 #define ABIT_UGURU3_MAX_DMI_NAMES 2
122
123 struct abituguru3_motherboard_info {
124 u16 id;
125 const char *dmi_name[ABIT_UGURU3_MAX_DMI_NAMES + 1];
126 /* + 1 -> end of sensors indicated by a sensor with name == NULL */
127 struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
128 };
129
130 /* For the Abit uGuru, we need to keep some data in memory.
131 The structure is dynamically allocated, at the same time when a new
132 abituguru3 device is allocated. */
133 struct abituguru3_data {
134 struct device *hwmon_dev; /* hwmon registered device */
135 struct mutex update_lock; /* protect access to data and uGuru */
136 unsigned short addr; /* uguru base address */
137 char valid; /* !=0 if following fields are valid */
138 unsigned long last_updated; /* In jiffies */
139
140 /* For convenience the sysfs attr and their names are generated
141 automatically. We have max 10 entries per sensor (for in sensors) */
142 struct sensor_device_attribute_2 sysfs_attr[ABIT_UGURU3_MAX_NO_SENSORS
143 * 10];
144
145 /* Buffer to store the dynamically generated sysfs names */
146 char sysfs_names[ABIT_UGURU3_SYSFS_NAMES_LENGTH];
147
148 /* Pointer to the sensors info for the detected motherboard */
149 const struct abituguru3_sensor_info *sensors;
150
151 /* The abituguru3 supports upto 48 sensors, and thus has registers
152 sets for 48 sensors, for convienence reasons / simplicity of the
153 code we always read and store all registers for all 48 sensors */
154
155 /* Alarms for all 48 sensors (1 bit per sensor) */
156 u8 alarms[48/8];
157
158 /* Value of all 48 sensors */
159 u8 value[48];
160
161 /* Settings of all 48 sensors, note in and temp sensors (the first 32
162 sensors) have 3 bytes of settings, while fans only have 2 bytes,
163 for convenience we use 3 bytes for all sensors */
164 u8 settings[48][3];
165 };
166
167
168 /* Constants */
169 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
170 { 0x000C, { NULL } /* Unknown, need DMI string */, {
171 { "CPU Core", 0, 0, 10, 1, 0 },
172 { "DDR", 1, 0, 10, 1, 0 },
173 { "DDR VTT", 2, 0, 10, 1, 0 },
174 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
175 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
176 { "MCH 2.5V", 5, 0, 20, 1, 0 },
177 { "ICH 1.05V", 6, 0, 10, 1, 0 },
178 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
179 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
180 { "ATX +5V", 9, 0, 30, 1, 0 },
181 { "+3.3V", 10, 0, 20, 1, 0 },
182 { "5VSB", 11, 0, 30, 1, 0 },
183 { "CPU", 24, 1, 1, 1, 0 },
184 { "System", 25, 1, 1, 1, 0 },
185 { "PWM", 26, 1, 1, 1, 0 },
186 { "CPU Fan", 32, 2, 60, 1, 0 },
187 { "NB Fan", 33, 2, 60, 1, 0 },
188 { "SYS FAN", 34, 2, 60, 1, 0 },
189 { "AUX1 Fan", 35, 2, 60, 1, 0 },
190 { NULL, 0, 0, 0, 0, 0 } }
191 },
192 { 0x000D, { NULL } /* Abit AW8, need DMI string */, {
193 { "CPU Core", 0, 0, 10, 1, 0 },
194 { "DDR", 1, 0, 10, 1, 0 },
195 { "DDR VTT", 2, 0, 10, 1, 0 },
196 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
197 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
198 { "MCH 2.5V", 5, 0, 20, 1, 0 },
199 { "ICH 1.05V", 6, 0, 10, 1, 0 },
200 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
201 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
202 { "ATX +5V", 9, 0, 30, 1, 0 },
203 { "+3.3V", 10, 0, 20, 1, 0 },
204 { "5VSB", 11, 0, 30, 1, 0 },
205 { "CPU", 24, 1, 1, 1, 0 },
206 { "System", 25, 1, 1, 1, 0 },
207 { "PWM1", 26, 1, 1, 1, 0 },
208 { "PWM2", 27, 1, 1, 1, 0 },
209 { "PWM3", 28, 1, 1, 1, 0 },
210 { "PWM4", 29, 1, 1, 1, 0 },
211 { "CPU Fan", 32, 2, 60, 1, 0 },
212 { "NB Fan", 33, 2, 60, 1, 0 },
213 { "SYS Fan", 34, 2, 60, 1, 0 },
214 { "AUX1 Fan", 35, 2, 60, 1, 0 },
215 { "AUX2 Fan", 36, 2, 60, 1, 0 },
216 { "AUX3 Fan", 37, 2, 60, 1, 0 },
217 { "AUX4 Fan", 38, 2, 60, 1, 0 },
218 { "AUX5 Fan", 39, 2, 60, 1, 0 },
219 { NULL, 0, 0, 0, 0, 0 } }
220 },
221 { 0x000E, { NULL } /* AL-8, need DMI string */, {
222 { "CPU Core", 0, 0, 10, 1, 0 },
223 { "DDR", 1, 0, 10, 1, 0 },
224 { "DDR VTT", 2, 0, 10, 1, 0 },
225 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
226 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
227 { "MCH 2.5V", 5, 0, 20, 1, 0 },
228 { "ICH 1.05V", 6, 0, 10, 1, 0 },
229 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
230 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
231 { "ATX +5V", 9, 0, 30, 1, 0 },
232 { "+3.3V", 10, 0, 20, 1, 0 },
233 { "5VSB", 11, 0, 30, 1, 0 },
234 { "CPU", 24, 1, 1, 1, 0 },
235 { "System", 25, 1, 1, 1, 0 },
236 { "PWM", 26, 1, 1, 1, 0 },
237 { "CPU Fan", 32, 2, 60, 1, 0 },
238 { "NB Fan", 33, 2, 60, 1, 0 },
239 { "SYS Fan", 34, 2, 60, 1, 0 },
240 { NULL, 0, 0, 0, 0, 0 } }
241 },
242 { 0x000F, { NULL } /* Unknown, need DMI string */, {
243
244 { "CPU Core", 0, 0, 10, 1, 0 },
245 { "DDR", 1, 0, 10, 1, 0 },
246 { "DDR VTT", 2, 0, 10, 1, 0 },
247 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
248 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
249 { "MCH 2.5V", 5, 0, 20, 1, 0 },
250 { "ICH 1.05V", 6, 0, 10, 1, 0 },
251 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
252 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
253 { "ATX +5V", 9, 0, 30, 1, 0 },
254 { "+3.3V", 10, 0, 20, 1, 0 },
255 { "5VSB", 11, 0, 30, 1, 0 },
256 { "CPU", 24, 1, 1, 1, 0 },
257 { "System", 25, 1, 1, 1, 0 },
258 { "PWM", 26, 1, 1, 1, 0 },
259 { "CPU Fan", 32, 2, 60, 1, 0 },
260 { "NB Fan", 33, 2, 60, 1, 0 },
261 { "SYS Fan", 34, 2, 60, 1, 0 },
262 { NULL, 0, 0, 0, 0, 0 } }
263 },
264 { 0x0010, { NULL } /* Abit NI8 SLI GR, need DMI string */, {
265 { "CPU Core", 0, 0, 10, 1, 0 },
266 { "DDR", 1, 0, 10, 1, 0 },
267 { "DDR VTT", 2, 0, 10, 1, 0 },
268 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
269 { "NB 1.4V", 4, 0, 10, 1, 0 },
270 { "SB 1.5V", 6, 0, 10, 1, 0 },
271 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
272 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
273 { "ATX +5V", 9, 0, 30, 1, 0 },
274 { "+3.3V", 10, 0, 20, 1, 0 },
275 { "5VSB", 11, 0, 30, 1, 0 },
276 { "CPU", 24, 1, 1, 1, 0 },
277 { "SYS", 25, 1, 1, 1, 0 },
278 { "PWM", 26, 1, 1, 1, 0 },
279 { "CPU Fan", 32, 2, 60, 1, 0 },
280 { "NB Fan", 33, 2, 60, 1, 0 },
281 { "SYS Fan", 34, 2, 60, 1, 0 },
282 { "AUX1 Fan", 35, 2, 60, 1, 0 },
283 { "OTES1 Fan", 36, 2, 60, 1, 0 },
284 { NULL, 0, 0, 0, 0, 0 } }
285 },
286 { 0x0011, { "AT8 32X", NULL }, {
287 { "CPU Core", 0, 0, 10, 1, 0 },
288 { "DDR", 1, 0, 20, 1, 0 },
289 { "DDR VTT", 2, 0, 10, 1, 0 },
290 { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 },
291 { "NB 1.8V", 4, 0, 10, 1, 0 },
292 { "NB 1.8V Dual", 5, 0, 10, 1, 0 },
293 { "HTV 1.2", 3, 0, 10, 1, 0 },
294 { "PCIE 1.2V", 12, 0, 10, 1, 0 },
295 { "NB 1.2V", 13, 0, 10, 1, 0 },
296 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
297 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
298 { "ATX +5V", 9, 0, 30, 1, 0 },
299 { "+3.3V", 10, 0, 20, 1, 0 },
300 { "5VSB", 11, 0, 30, 1, 0 },
301 { "CPU", 24, 1, 1, 1, 0 },
302 { "NB", 25, 1, 1, 1, 0 },
303 { "System", 26, 1, 1, 1, 0 },
304 { "PWM", 27, 1, 1, 1, 0 },
305 { "CPU Fan", 32, 2, 60, 1, 0 },
306 { "NB Fan", 33, 2, 60, 1, 0 },
307 { "SYS Fan", 34, 2, 60, 1, 0 },
308 { "AUX1 Fan", 35, 2, 60, 1, 0 },
309 { "AUX2 Fan", 36, 2, 60, 1, 0 },
310 { "AUX3 Fan", 37, 2, 60, 1, 0 },
311 { NULL, 0, 0, 0, 0, 0 } }
312 },
313 { 0x0012, { NULL } /* Abit AN8 32X, need DMI string */, {
314 { "CPU Core", 0, 0, 10, 1, 0 },
315 { "DDR", 1, 0, 20, 1, 0 },
316 { "DDR VTT", 2, 0, 10, 1, 0 },
317 { "HyperTransport", 3, 0, 10, 1, 0 },
318 { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 },
319 { "NB", 4, 0, 10, 1, 0 },
320 { "SB", 6, 0, 10, 1, 0 },
321 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
322 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
323 { "ATX +5V", 9, 0, 30, 1, 0 },
324 { "+3.3V", 10, 0, 20, 1, 0 },
325 { "5VSB", 11, 0, 30, 1, 0 },
326 { "CPU", 24, 1, 1, 1, 0 },
327 { "SYS", 25, 1, 1, 1, 0 },
328 { "PWM", 26, 1, 1, 1, 0 },
329 { "CPU Fan", 32, 2, 60, 1, 0 },
330 { "NB Fan", 33, 2, 60, 1, 0 },
331 { "SYS Fan", 34, 2, 60, 1, 0 },
332 { "AUX1 Fan", 36, 2, 60, 1, 0 },
333 { NULL, 0, 0, 0, 0, 0 } }
334 },
335 { 0x0013, { NULL } /* Abit AW8D, need DMI string */, {
336 { "CPU Core", 0, 0, 10, 1, 0 },
337 { "DDR", 1, 0, 10, 1, 0 },
338 { "DDR VTT", 2, 0, 10, 1, 0 },
339 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
340 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
341 { "MCH 2.5V", 5, 0, 20, 1, 0 },
342 { "ICH 1.05V", 6, 0, 10, 1, 0 },
343 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
344 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
345 { "ATX +5V", 9, 0, 30, 1, 0 },
346 { "+3.3V", 10, 0, 20, 1, 0 },
347 { "5VSB", 11, 0, 30, 1, 0 },
348 { "CPU", 24, 1, 1, 1, 0 },
349 { "System", 25, 1, 1, 1, 0 },
350 { "PWM1", 26, 1, 1, 1, 0 },
351 { "PWM2", 27, 1, 1, 1, 0 },
352 { "PWM3", 28, 1, 1, 1, 0 },
353 { "PWM4", 29, 1, 1, 1, 0 },
354 { "CPU Fan", 32, 2, 60, 1, 0 },
355 { "NB Fan", 33, 2, 60, 1, 0 },
356 { "SYS Fan", 34, 2, 60, 1, 0 },
357 { "AUX1 Fan", 35, 2, 60, 1, 0 },
358 { "AUX2 Fan", 36, 2, 60, 1, 0 },
359 { "AUX3 Fan", 37, 2, 60, 1, 0 },
360 { "AUX4 Fan", 38, 2, 60, 1, 0 },
361 { "AUX5 Fan", 39, 2, 60, 1, 0 },
362 { NULL, 0, 0, 0, 0, 0 } }
363 },
364 { 0x0014, { "AB9", "AB9 Pro", NULL }, {
365 { "CPU Core", 0, 0, 10, 1, 0 },
366 { "DDR", 1, 0, 10, 1, 0 },
367 { "DDR VTT", 2, 0, 10, 1, 0 },
368 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
369 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
370 { "MCH 2.5V", 5, 0, 20, 1, 0 },
371 { "ICH 1.05V", 6, 0, 10, 1, 0 },
372 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
373 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
374 { "ATX +5V", 9, 0, 30, 1, 0 },
375 { "+3.3V", 10, 0, 20, 1, 0 },
376 { "5VSB", 11, 0, 30, 1, 0 },
377 { "CPU", 24, 1, 1, 1, 0 },
378 { "System", 25, 1, 1, 1, 0 },
379 { "PWM", 26, 1, 1, 1, 0 },
380 { "CPU Fan", 32, 2, 60, 1, 0 },
381 { "NB Fan", 33, 2, 60, 1, 0 },
382 { "SYS Fan", 34, 2, 60, 1, 0 },
383 { NULL, 0, 0, 0, 0, 0 } }
384 },
385 { 0x0015, { NULL } /* Unknown, need DMI string */, {
386 { "CPU Core", 0, 0, 10, 1, 0 },
387 { "DDR", 1, 0, 20, 1, 0 },
388 { "DDR VTT", 2, 0, 10, 1, 0 },
389 { "HyperTransport", 3, 0, 10, 1, 0 },
390 { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 },
391 { "NB", 4, 0, 10, 1, 0 },
392 { "SB", 6, 0, 10, 1, 0 },
393 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
394 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
395 { "ATX +5V", 9, 0, 30, 1, 0 },
396 { "+3.3V", 10, 0, 20, 1, 0 },
397 { "5VSB", 11, 0, 30, 1, 0 },
398 { "CPU", 24, 1, 1, 1, 0 },
399 { "SYS", 25, 1, 1, 1, 0 },
400 { "PWM", 26, 1, 1, 1, 0 },
401 { "CPU Fan", 32, 2, 60, 1, 0 },
402 { "NB Fan", 33, 2, 60, 1, 0 },
403 { "SYS Fan", 34, 2, 60, 1, 0 },
404 { "AUX1 Fan", 33, 2, 60, 1, 0 },
405 { "AUX2 Fan", 35, 2, 60, 1, 0 },
406 { "AUX3 Fan", 36, 2, 60, 1, 0 },
407 { NULL, 0, 0, 0, 0, 0 } }
408 },
409 { 0x0016, { "AW9D-MAX", NULL }, {
410 { "CPU Core", 0, 0, 10, 1, 0 },
411 { "DDR2", 1, 0, 20, 1, 0 },
412 { "DDR2 VTT", 2, 0, 10, 1, 0 },
413 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
414 { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 },
415 { "MCH 2.5V", 5, 0, 20, 1, 0 },
416 { "ICH 1.05V", 6, 0, 10, 1, 0 },
417 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
418 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
419 { "ATX +5V", 9, 0, 30, 1, 0 },
420 { "+3.3V", 10, 0, 20, 1, 0 },
421 { "5VSB", 11, 0, 30, 1, 0 },
422 { "CPU", 24, 1, 1, 1, 0 },
423 { "System", 25, 1, 1, 1, 0 },
424 { "PWM1", 26, 1, 1, 1, 0 },
425 { "PWM2", 27, 1, 1, 1, 0 },
426 { "PWM3", 28, 1, 1, 1, 0 },
427 { "PWM4", 29, 1, 1, 1, 0 },
428 { "CPU Fan", 32, 2, 60, 1, 0 },
429 { "NB Fan", 33, 2, 60, 1, 0 },
430 { "SYS Fan", 34, 2, 60, 1, 0 },
431 { "AUX1 Fan", 35, 2, 60, 1, 0 },
432 { "AUX2 Fan", 36, 2, 60, 1, 0 },
433 { "AUX3 Fan", 37, 2, 60, 1, 0 },
434 { "OTES1 Fan", 38, 2, 60, 1, 0 },
435 { NULL, 0, 0, 0, 0, 0 } }
436 },
437 { 0x0017, { NULL } /* Unknown, need DMI string */, {
438 { "CPU Core", 0, 0, 10, 1, 0 },
439 { "DDR2", 1, 0, 20, 1, 0 },
440 { "DDR2 VTT", 2, 0, 10, 1, 0 },
441 { "HyperTransport", 3, 0, 10, 1, 0 },
442 { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 },
443 { "NB 1.8V", 4, 0, 10, 1, 0 },
444 { "NB 1.2V ", 13, 0, 10, 1, 0 },
445 { "SB 1.2V", 5, 0, 10, 1, 0 },
446 { "PCIE 1.2V", 12, 0, 10, 1, 0 },
447 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
448 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
449 { "ATX +5V", 9, 0, 30, 1, 0 },
450 { "ATX +3.3V", 10, 0, 20, 1, 0 },
451 { "ATX 5VSB", 11, 0, 30, 1, 0 },
452 { "CPU", 24, 1, 1, 1, 0 },
453 { "System", 26, 1, 1, 1, 0 },
454 { "PWM", 27, 1, 1, 1, 0 },
455 { "CPU FAN", 32, 2, 60, 1, 0 },
456 { "SYS FAN", 34, 2, 60, 1, 0 },
457 { "AUX1 FAN", 35, 2, 60, 1, 0 },
458 { "AUX2 FAN", 36, 2, 60, 1, 0 },
459 { "AUX3 FAN", 37, 2, 60, 1, 0 },
460 { NULL, 0, 0, 0, 0, 0 } }
461 },
462 { 0x0018, { "AB9 QuadGT", NULL }, {
463 { "CPU Core", 0, 0, 10, 1, 0 },
464 { "DDR2", 1, 0, 20, 1, 0 },
465 { "DDR2 VTT", 2, 0, 10, 1, 0 },
466 { "CPU VTT", 3, 0, 10, 1, 0 },
467 { "MCH 1.25V", 4, 0, 10, 1, 0 },
468 { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
469 { "ICH 1.05V", 6, 0, 10, 1, 0 },
470 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
471 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
472 { "ATX +5V", 9, 0, 30, 1, 0 },
473 { "+3.3V", 10, 0, 20, 1, 0 },
474 { "5VSB", 11, 0, 30, 1, 0 },
475 { "CPU", 24, 1, 1, 1, 0 },
476 { "System", 25, 1, 1, 1, 0 },
477 { "PWM Phase1", 26, 1, 1, 1, 0 },
478 { "PWM Phase2", 27, 1, 1, 1, 0 },
479 { "PWM Phase3", 28, 1, 1, 1, 0 },
480 { "PWM Phase4", 29, 1, 1, 1, 0 },
481 { "PWM Phase5", 30, 1, 1, 1, 0 },
482 { "CPU Fan", 32, 2, 60, 1, 0 },
483 { "SYS Fan", 34, 2, 60, 1, 0 },
484 { "AUX1 Fan", 33, 2, 60, 1, 0 },
485 { "AUX2 Fan", 35, 2, 60, 1, 0 },
486 { "AUX3 Fan", 36, 2, 60, 1, 0 },
487 { NULL, 0, 0, 0, 0, 0 } }
488 },
489 { 0x0019, { "IN9 32X MAX", NULL }, {
490 { "CPU Core", 7, 0, 10, 1, 0 },
491 { "DDR2", 13, 0, 20, 1, 0 },
492 { "DDR2 VTT", 14, 0, 10, 1, 0 },
493 { "CPU VTT", 3, 0, 20, 1, 0 },
494 { "NB 1.2V", 4, 0, 10, 1, 0 },
495 { "SB 1.5V", 6, 0, 10, 1, 0 },
496 { "HyperTransport", 5, 0, 10, 1, 0 },
497 { "ATX +12V (24-Pin)", 12, 0, 60, 1, 0 },
498 { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 },
499 { "ATX +5V", 9, 0, 30, 1, 0 },
500 { "ATX +3.3V", 10, 0, 20, 1, 0 },
501 { "ATX 5VSB", 11, 0, 30, 1, 0 },
502 { "CPU", 24, 1, 1, 1, 0 },
503 { "System", 25, 1, 1, 1, 0 },
504 { "PWM Phase1", 26, 1, 1, 1, 0 },
505 { "PWM Phase2", 27, 1, 1, 1, 0 },
506 { "PWM Phase3", 28, 1, 1, 1, 0 },
507 { "PWM Phase4", 29, 1, 1, 1, 0 },
508 { "PWM Phase5", 30, 1, 1, 1, 0 },
509 { "CPU FAN", 32, 2, 60, 1, 0 },
510 { "SYS FAN", 34, 2, 60, 1, 0 },
511 { "AUX1 FAN", 33, 2, 60, 1, 0 },
512 { "AUX2 FAN", 35, 2, 60, 1, 0 },
513 { "AUX3 FAN", 36, 2, 60, 1, 0 },
514 { NULL, 0, 0, 0, 0, 0 } }
515 },
516 { 0x001A, { "IP35 Pro", "IP35 Pro XE", NULL }, {
517 { "CPU Core", 0, 0, 10, 1, 0 },
518 { "DDR2", 1, 0, 20, 1, 0 },
519 { "DDR2 VTT", 2, 0, 10, 1, 0 },
520 { "CPU VTT 1.2V", 3, 0, 10, 1, 0 },
521 { "MCH 1.25V", 4, 0, 10, 1, 0 },
522 { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
523 { "ICH 1.05V", 6, 0, 10, 1, 0 },
524 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
525 { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 },
526 { "ATX +5V", 9, 0, 30, 1, 0 },
527 { "+3.3V", 10, 0, 20, 1, 0 },
528 { "5VSB", 11, 0, 30, 1, 0 },
529 { "CPU", 24, 1, 1, 1, 0 },
530 { "System", 25, 1, 1, 1, 0 },
531 { "PWM", 26, 1, 1, 1, 0 },
532 { "PWM Phase2", 27, 1, 1, 1, 0 },
533 { "PWM Phase3", 28, 1, 1, 1, 0 },
534 { "PWM Phase4", 29, 1, 1, 1, 0 },
535 { "PWM Phase5", 30, 1, 1, 1, 0 },
536 { "CPU Fan", 32, 2, 60, 1, 0 },
537 { "SYS Fan", 34, 2, 60, 1, 0 },
538 { "AUX1 Fan", 33, 2, 60, 1, 0 },
539 { "AUX2 Fan", 35, 2, 60, 1, 0 },
540 { "AUX3 Fan", 36, 2, 60, 1, 0 },
541 { "AUX4 Fan", 37, 2, 60, 1, 0 },
542 { NULL, 0, 0, 0, 0, 0 } }
543 },
544 { 0x001B, { NULL } /* Unknown, need DMI string */, {
545 { "CPU Core", 0, 0, 10, 1, 0 },
546 { "DDR3", 1, 0, 20, 1, 0 },
547 { "DDR3 VTT", 2, 0, 10, 1, 0 },
548 { "CPU VTT", 3, 0, 10, 1, 0 },
549 { "MCH 1.25V", 4, 0, 10, 1, 0 },
550 { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
551 { "ICH 1.05V", 6, 0, 10, 1, 0 },
552 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
553 { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 },
554 { "ATX +5V", 9, 0, 30, 1, 0 },
555 { "+3.3V", 10, 0, 20, 1, 0 },
556 { "5VSB", 11, 0, 30, 1, 0 },
557 { "CPU", 24, 1, 1, 1, 0 },
558 { "System", 25, 1, 1, 1, 0 },
559 { "PWM Phase1", 26, 1, 1, 1, 0 },
560 { "PWM Phase2", 27, 1, 1, 1, 0 },
561 { "PWM Phase3", 28, 1, 1, 1, 0 },
562 { "PWM Phase4", 29, 1, 1, 1, 0 },
563 { "PWM Phase5", 30, 1, 1, 1, 0 },
564 { "CPU Fan", 32, 2, 60, 1, 0 },
565 { "SYS Fan", 34, 2, 60, 1, 0 },
566 { "AUX1 Fan", 33, 2, 60, 1, 0 },
567 { "AUX2 Fan", 35, 2, 60, 1, 0 },
568 { "AUX3 Fan", 36, 2, 60, 1, 0 },
569 { NULL, 0, 0, 0, 0, 0 } }
570 },
571 { 0x001C, { "IX38 QuadGT", NULL }, {
572 { "CPU Core", 0, 0, 10, 1, 0 },
573 { "DDR2", 1, 0, 20, 1, 0 },
574 { "DDR2 VTT", 2, 0, 10, 1, 0 },
575 { "CPU VTT", 3, 0, 10, 1, 0 },
576 { "MCH 1.25V", 4, 0, 10, 1, 0 },
577 { "ICHIO 1.5V", 5, 0, 10, 1, 0 },
578 { "ICH 1.05V", 6, 0, 10, 1, 0 },
579 { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 },
580 { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 },
581 { "ATX +5V", 9, 0, 30, 1, 0 },
582 { "+3.3V", 10, 0, 20, 1, 0 },
583 { "5VSB", 11, 0, 30, 1, 0 },
584 { "CPU", 24, 1, 1, 1, 0 },
585 { "System", 25, 1, 1, 1, 0 },
586 { "PWM Phase1", 26, 1, 1, 1, 0 },
587 { "PWM Phase2", 27, 1, 1, 1, 0 },
588 { "PWM Phase3", 28, 1, 1, 1, 0 },
589 { "PWM Phase4", 29, 1, 1, 1, 0 },
590 { "PWM Phase5", 30, 1, 1, 1, 0 },
591 { "CPU Fan", 32, 2, 60, 1, 0 },
592 { "SYS Fan", 34, 2, 60, 1, 0 },
593 { "AUX1 Fan", 33, 2, 60, 1, 0 },
594 { "AUX2 Fan", 35, 2, 60, 1, 0 },
595 { "AUX3 Fan", 36, 2, 60, 1, 0 },
596 { NULL, 0, 0, 0, 0, 0 } }
597 },
598 { 0x0000, { NULL }, { { NULL, 0, 0, 0, 0, 0 } } }
599 };
600
601
602 /* Insmod parameters */
603 static int force;
604 module_param(force, bool, 0);
605 MODULE_PARM_DESC(force, "Set to one to force detection.");
606 /* Default verbose is 1, since this driver is still in the testing phase */
607 static int verbose = 1;
608 module_param(verbose, bool, 0644);
609 MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
610
611
612 /* wait while the uguru is busy (usually after a write) */
613 static int abituguru3_wait_while_busy(struct abituguru3_data *data)
614 {
615 u8 x;
616 int timeout = ABIT_UGURU3_WAIT_TIMEOUT;
617
618 while ((x = inb_p(data->addr + ABIT_UGURU3_DATA)) &
619 ABIT_UGURU3_STATUS_BUSY) {
620 timeout--;
621 if (timeout == 0)
622 return x;
623 /* sleep a bit before our last try, to give the uGuru3 one
624 last chance to respond. */
625 if (timeout == 1)
626 msleep(1);
627 }
628 return ABIT_UGURU3_SUCCESS;
629 }
630
631 /* wait till uguru is ready to be read */
632 static int abituguru3_wait_for_read(struct abituguru3_data *data)
633 {
634 u8 x;
635 int timeout = ABIT_UGURU3_WAIT_TIMEOUT;
636
637 while (!((x = inb_p(data->addr + ABIT_UGURU3_DATA)) &
638 ABIT_UGURU3_STATUS_READY_FOR_READ)) {
639 timeout--;
640 if (timeout == 0)
641 return x;
642 /* sleep a bit before our last try, to give the uGuru3 one
643 last chance to respond. */
644 if (timeout == 1)
645 msleep(1);
646 }
647 return ABIT_UGURU3_SUCCESS;
648 }
649
650 /* This synchronizes us with the uGuru3's protocol state machine, this
651 must be done before each command. */
652 static int abituguru3_synchronize(struct abituguru3_data *data)
653 {
654 int x, timeout = ABIT_UGURU3_SYNCHRONIZE_TIMEOUT;
655
656 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
657 ABIT_UGURU3_DEBUG("synchronize timeout during initial busy "
658 "wait, status: 0x%02x\n", x);
659 return -EIO;
660 }
661
662 outb(0x20, data->addr + ABIT_UGURU3_DATA);
663 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
664 ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x20, "
665 "status: 0x%02x\n", x);
666 return -EIO;
667 }
668
669 outb(0x10, data->addr + ABIT_UGURU3_CMD);
670 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
671 ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x10, "
672 "status: 0x%02x\n", x);
673 return -EIO;
674 }
675
676 outb(0x00, data->addr + ABIT_UGURU3_CMD);
677 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
678 ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x00, "
679 "status: 0x%02x\n", x);
680 return -EIO;
681 }
682
683 if ((x = abituguru3_wait_for_read(data)) != ABIT_UGURU3_SUCCESS) {
684 ABIT_UGURU3_DEBUG("synchronize timeout waiting for read, "
685 "status: 0x%02x\n", x);
686 return -EIO;
687 }
688
689 while ((x = inb(data->addr + ABIT_UGURU3_CMD)) != 0xAC) {
690 timeout--;
691 if (timeout == 0) {
692 ABIT_UGURU3_DEBUG("synchronize timeout cmd does not "
693 "hold 0xAC after synchronize, cmd: 0x%02x\n",
694 x);
695 return -EIO;
696 }
697 msleep(1);
698 }
699 return 0;
700 }
701
702 /* Read count bytes from sensor sensor_addr in bank bank_addr and store the
703 result in buf */
704 static int abituguru3_read(struct abituguru3_data *data, u8 bank, u8 offset,
705 u8 count, u8 *buf)
706 {
707 int i, x;
708
709 if ((x = abituguru3_synchronize(data)))
710 return x;
711
712 outb(0x1A, data->addr + ABIT_UGURU3_DATA);
713 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
714 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
715 "sending 0x1A, status: 0x%02x\n", (unsigned int)bank,
716 (unsigned int)offset, x);
717 return -EIO;
718 }
719
720 outb(bank, data->addr + ABIT_UGURU3_CMD);
721 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
722 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
723 "sending the bank, status: 0x%02x\n",
724 (unsigned int)bank, (unsigned int)offset, x);
725 return -EIO;
726 }
727
728 outb(offset, data->addr + ABIT_UGURU3_CMD);
729 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
730 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
731 "sending the offset, status: 0x%02x\n",
732 (unsigned int)bank, (unsigned int)offset, x);
733 return -EIO;
734 }
735
736 outb(count, data->addr + ABIT_UGURU3_CMD);
737 if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) {
738 ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after "
739 "sending the count, status: 0x%02x\n",
740 (unsigned int)bank, (unsigned int)offset, x);
741 return -EIO;
742 }
743
744 for (i = 0; i < count; i++) {
745 if ((x = abituguru3_wait_for_read(data)) !=
746 ABIT_UGURU3_SUCCESS) {
747 ABIT_UGURU3_DEBUG("timeout reading byte %d from "
748 "0x%02x:0x%02x, status: 0x%02x\n", i,
749 (unsigned int)bank, (unsigned int)offset, x);
750 break;
751 }
752 buf[i] = inb(data->addr + ABIT_UGURU3_CMD);
753 }
754 return i;
755 }
756
757 /* Sensor settings are stored 1 byte per offset with the bytes
758 placed add consecutive offsets. */
759 static int abituguru3_read_increment_offset(struct abituguru3_data *data,
760 u8 bank, u8 offset, u8 count,
761 u8 *buf, int offset_count)
762 {
763 int i, x;
764
765 for (i = 0; i < offset_count; i++)
766 if ((x = abituguru3_read(data, bank, offset + i, count,
767 buf + i * count)) != count) {
768 if (x < 0)
769 return x;
770 return i * count + x;
771 }
772
773 return i * count;
774 }
775
776 /* Following are the sysfs callback functions. These functions expect:
777 sensor_device_attribute_2->index: index into the data->sensors array
778 sensor_device_attribute_2->nr: register offset, bitmask or NA. */
779 static struct abituguru3_data *abituguru3_update_device(struct device *dev);
780
781 static ssize_t show_value(struct device *dev,
782 struct device_attribute *devattr, char *buf)
783 {
784 int value;
785 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
786 struct abituguru3_data *data = abituguru3_update_device(dev);
787 const struct abituguru3_sensor_info *sensor;
788
789 if (!data)
790 return -EIO;
791
792 sensor = &data->sensors[attr->index];
793
794 /* are we reading a setting, or is this a normal read? */
795 if (attr->nr)
796 value = data->settings[sensor->port][attr->nr];
797 else
798 value = data->value[sensor->port];
799
800 /* convert the value */
801 value = (value * sensor->multiplier) / sensor->divisor +
802 sensor->offset;
803
804 /* alternatively we could update the sensors settings struct for this,
805 but then its contents would differ from the windows sw ini files */
806 if (sensor->type == ABIT_UGURU3_TEMP_SENSOR)
807 value *= 1000;
808
809 return sprintf(buf, "%d\n", value);
810 }
811
812 static ssize_t show_alarm(struct device *dev,
813 struct device_attribute *devattr, char *buf)
814 {
815 int port;
816 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
817 struct abituguru3_data *data = abituguru3_update_device(dev);
818
819 if (!data)
820 return -EIO;
821
822 port = data->sensors[attr->index].port;
823
824 /* See if the alarm bit for this sensor is set and if a bitmask is
825 given in attr->nr also check if the alarm matches the type of alarm
826 we're looking for (for volt it can be either low or high). The type
827 is stored in a few readonly bits in the settings of the sensor. */
828 if ((data->alarms[port / 8] & (0x01 << (port % 8))) &&
829 (!attr->nr || (data->settings[port][0] & attr->nr)))
830 return sprintf(buf, "1\n");
831 else
832 return sprintf(buf, "0\n");
833 }
834
835 static ssize_t show_mask(struct device *dev,
836 struct device_attribute *devattr, char *buf)
837 {
838 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
839 struct abituguru3_data *data = dev_get_drvdata(dev);
840
841 if (data->settings[data->sensors[attr->index].port][0] & attr->nr)
842 return sprintf(buf, "1\n");
843 else
844 return sprintf(buf, "0\n");
845 }
846
847 static ssize_t show_label(struct device *dev,
848 struct device_attribute *devattr, char *buf)
849 {
850 struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
851 struct abituguru3_data *data = dev_get_drvdata(dev);
852
853 return sprintf(buf, "%s\n", data->sensors[attr->index].name);
854 }
855
856 static ssize_t show_name(struct device *dev,
857 struct device_attribute *devattr, char *buf)
858 {
859 return sprintf(buf, "%s\n", ABIT_UGURU3_NAME);
860 }
861
862 /* Sysfs attr templates, the real entries are generated automatically. */
863 static const
864 struct sensor_device_attribute_2 abituguru3_sysfs_templ[3][10] = { {
865 SENSOR_ATTR_2(in%d_input, 0444, show_value, NULL, 0, 0),
866 SENSOR_ATTR_2(in%d_min, 0444, show_value, NULL, 1, 0),
867 SENSOR_ATTR_2(in%d_max, 0444, show_value, NULL, 2, 0),
868 SENSOR_ATTR_2(in%d_min_alarm, 0444, show_alarm, NULL,
869 ABIT_UGURU3_VOLT_LOW_ALARM_FLAG, 0),
870 SENSOR_ATTR_2(in%d_max_alarm, 0444, show_alarm, NULL,
871 ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG, 0),
872 SENSOR_ATTR_2(in%d_beep, 0444, show_mask, NULL,
873 ABIT_UGURU3_BEEP_ENABLE, 0),
874 SENSOR_ATTR_2(in%d_shutdown, 0444, show_mask, NULL,
875 ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
876 SENSOR_ATTR_2(in%d_min_alarm_enable, 0444, show_mask, NULL,
877 ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE, 0),
878 SENSOR_ATTR_2(in%d_max_alarm_enable, 0444, show_mask, NULL,
879 ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE, 0),
880 SENSOR_ATTR_2(in%d_label, 0444, show_label, NULL, 0, 0)
881 }, {
882 SENSOR_ATTR_2(temp%d_input, 0444, show_value, NULL, 0, 0),
883 SENSOR_ATTR_2(temp%d_max, 0444, show_value, NULL, 1, 0),
884 SENSOR_ATTR_2(temp%d_crit, 0444, show_value, NULL, 2, 0),
885 SENSOR_ATTR_2(temp%d_alarm, 0444, show_alarm, NULL, 0, 0),
886 SENSOR_ATTR_2(temp%d_beep, 0444, show_mask, NULL,
887 ABIT_UGURU3_BEEP_ENABLE, 0),
888 SENSOR_ATTR_2(temp%d_shutdown, 0444, show_mask, NULL,
889 ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
890 SENSOR_ATTR_2(temp%d_alarm_enable, 0444, show_mask, NULL,
891 ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE, 0),
892 SENSOR_ATTR_2(temp%d_label, 0444, show_label, NULL, 0, 0)
893 }, {
894 SENSOR_ATTR_2(fan%d_input, 0444, show_value, NULL, 0, 0),
895 SENSOR_ATTR_2(fan%d_min, 0444, show_value, NULL, 1, 0),
896 SENSOR_ATTR_2(fan%d_alarm, 0444, show_alarm, NULL, 0, 0),
897 SENSOR_ATTR_2(fan%d_beep, 0444, show_mask, NULL,
898 ABIT_UGURU3_BEEP_ENABLE, 0),
899 SENSOR_ATTR_2(fan%d_shutdown, 0444, show_mask, NULL,
900 ABIT_UGURU3_SHUTDOWN_ENABLE, 0),
901 SENSOR_ATTR_2(fan%d_alarm_enable, 0444, show_mask, NULL,
902 ABIT_UGURU3_FAN_LOW_ALARM_ENABLE, 0),
903 SENSOR_ATTR_2(fan%d_label, 0444, show_label, NULL, 0, 0)
904 } };
905
906 static struct sensor_device_attribute_2 abituguru3_sysfs_attr[] = {
907 SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0),
908 };
909
910 static int __devinit abituguru3_probe(struct platform_device *pdev)
911 {
912 const int no_sysfs_attr[3] = { 10, 8, 7 };
913 int sensor_index[3] = { 0, 1, 1 };
914 struct abituguru3_data *data;
915 int i, j, type, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV;
916 char *sysfs_filename;
917 u8 buf[2];
918 u16 id;
919
920 if (!(data = kzalloc(sizeof(struct abituguru3_data), GFP_KERNEL)))
921 return -ENOMEM;
922
923 data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
924 mutex_init(&data->update_lock);
925 platform_set_drvdata(pdev, data);
926
927 /* Read the motherboard ID */
928 if ((i = abituguru3_read(data, ABIT_UGURU3_MISC_BANK,
929 ABIT_UGURU3_BOARD_ID, 2, buf)) != 2) {
930 goto abituguru3_probe_error;
931 }
932
933 /* Completely read the uGuru to see if one really is there */
934 if (!abituguru3_update_device(&pdev->dev))
935 goto abituguru3_probe_error;
936
937 /* lookup the ID in our motherboard table */
938 id = ((u16)buf[0] << 8) | (u16)buf[1];
939 for (i = 0; abituguru3_motherboards[i].id; i++)
940 if (abituguru3_motherboards[i].id == id)
941 break;
942 if (!abituguru3_motherboards[i].id) {
943 printk(KERN_ERR ABIT_UGURU3_NAME ": error unknown motherboard "
944 "ID: %04X. Please report this to the abituguru3 "
945 "maintainer (see MAINTAINERS)\n", (unsigned int)id);
946 goto abituguru3_probe_error;
947 }
948 data->sensors = abituguru3_motherboards[i].sensors;
949
950 printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
951 "ID: %04X\n", (unsigned int)id);
952
953 /* Fill the sysfs attr array */
954 sysfs_attr_i = 0;
955 sysfs_filename = data->sysfs_names;
956 sysfs_names_free = ABIT_UGURU3_SYSFS_NAMES_LENGTH;
957 for (i = 0; data->sensors[i].name; i++) {
958 /* Fail safe check, this should never happen! */
959 if (i >= ABIT_UGURU3_MAX_NO_SENSORS) {
960 printk(KERN_ERR ABIT_UGURU3_NAME
961 ": Fatal error motherboard has more sensors "
962 "then ABIT_UGURU3_MAX_NO_SENSORS. This should "
963 "never happen please report to the abituguru3 "
964 "maintainer (see MAINTAINERS)\n");
965 res = -ENAMETOOLONG;
966 goto abituguru3_probe_error;
967 }
968 type = data->sensors[i].type;
969 for (j = 0; j < no_sysfs_attr[type]; j++) {
970 used = snprintf(sysfs_filename, sysfs_names_free,
971 abituguru3_sysfs_templ[type][j].dev_attr.attr.
972 name, sensor_index[type]) + 1;
973 data->sysfs_attr[sysfs_attr_i] =
974 abituguru3_sysfs_templ[type][j];
975 data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name =
976 sysfs_filename;
977 data->sysfs_attr[sysfs_attr_i].index = i;
978 sysfs_filename += used;
979 sysfs_names_free -= used;
980 sysfs_attr_i++;
981 }
982 sensor_index[type]++;
983 }
984 /* Fail safe check, this should never happen! */
985 if (sysfs_names_free < 0) {
986 printk(KERN_ERR ABIT_UGURU3_NAME
987 ": Fatal error ran out of space for sysfs attr names. "
988 "This should never happen please report to the "
989 "abituguru3 maintainer (see MAINTAINERS)\n");
990 res = -ENAMETOOLONG;
991 goto abituguru3_probe_error;
992 }
993
994 /* Register sysfs hooks */
995 for (i = 0; i < sysfs_attr_i; i++)
996 if (device_create_file(&pdev->dev,
997 &data->sysfs_attr[i].dev_attr))
998 goto abituguru3_probe_error;
999 for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
1000 if (device_create_file(&pdev->dev,
1001 &abituguru3_sysfs_attr[i].dev_attr))
1002 goto abituguru3_probe_error;
1003
1004 data->hwmon_dev = hwmon_device_register(&pdev->dev);
1005 if (IS_ERR(data->hwmon_dev)) {
1006 res = PTR_ERR(data->hwmon_dev);
1007 goto abituguru3_probe_error;
1008 }
1009
1010 return 0; /* success */
1011
1012 abituguru3_probe_error:
1013 for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
1014 device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
1015 for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
1016 device_remove_file(&pdev->dev,
1017 &abituguru3_sysfs_attr[i].dev_attr);
1018 kfree(data);
1019 return res;
1020 }
1021
1022 static int __devexit abituguru3_remove(struct platform_device *pdev)
1023 {
1024 int i;
1025 struct abituguru3_data *data = platform_get_drvdata(pdev);
1026
1027 platform_set_drvdata(pdev, NULL);
1028 hwmon_device_unregister(data->hwmon_dev);
1029 for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++)
1030 device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr);
1031 for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++)
1032 device_remove_file(&pdev->dev,
1033 &abituguru3_sysfs_attr[i].dev_attr);
1034 kfree(data);
1035
1036 return 0;
1037 }
1038
1039 static struct abituguru3_data *abituguru3_update_device(struct device *dev)
1040 {
1041 int i;
1042 struct abituguru3_data *data = dev_get_drvdata(dev);
1043
1044 mutex_lock(&data->update_lock);
1045 if (!data->valid || time_after(jiffies, data->last_updated + HZ)) {
1046 /* Clear data->valid while updating */
1047 data->valid = 0;
1048 /* Read alarms */
1049 if (abituguru3_read_increment_offset(data,
1050 ABIT_UGURU3_SETTINGS_BANK,
1051 ABIT_UGURU3_ALARMS_START,
1052 1, data->alarms, 48/8) != (48/8))
1053 goto LEAVE_UPDATE;
1054 /* Read in and temp sensors (3 byte settings / sensor) */
1055 for (i = 0; i < 32; i++) {
1056 if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK,
1057 ABIT_UGURU3_VALUES_START + i,
1058 1, &data->value[i]) != 1)
1059 goto LEAVE_UPDATE;
1060 if (abituguru3_read_increment_offset(data,
1061 ABIT_UGURU3_SETTINGS_BANK,
1062 ABIT_UGURU3_SETTINGS_START + i * 3,
1063 1,
1064 data->settings[i], 3) != 3)
1065 goto LEAVE_UPDATE;
1066 }
1067 /* Read temp sensors (2 byte settings / sensor) */
1068 for (i = 0; i < 16; i++) {
1069 if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK,
1070 ABIT_UGURU3_VALUES_START + 32 + i,
1071 1, &data->value[32 + i]) != 1)
1072 goto LEAVE_UPDATE;
1073 if (abituguru3_read_increment_offset(data,
1074 ABIT_UGURU3_SETTINGS_BANK,
1075 ABIT_UGURU3_SETTINGS_START + 32 * 3 +
1076 i * 2, 1,
1077 data->settings[32 + i], 2) != 2)
1078 goto LEAVE_UPDATE;
1079 }
1080 data->last_updated = jiffies;
1081 data->valid = 1;
1082 }
1083 LEAVE_UPDATE:
1084 mutex_unlock(&data->update_lock);
1085 if (data->valid)
1086 return data;
1087 else
1088 return NULL;
1089 }
1090
1091 #ifdef CONFIG_PM
1092 static int abituguru3_suspend(struct platform_device *pdev, pm_message_t state)
1093 {
1094 struct abituguru3_data *data = platform_get_drvdata(pdev);
1095 /* make sure all communications with the uguru3 are done and no new
1096 ones are started */
1097 mutex_lock(&data->update_lock);
1098 return 0;
1099 }
1100
1101 static int abituguru3_resume(struct platform_device *pdev)
1102 {
1103 struct abituguru3_data *data = platform_get_drvdata(pdev);
1104 mutex_unlock(&data->update_lock);
1105 return 0;
1106 }
1107 #else
1108 #define abituguru3_suspend NULL
1109 #define abituguru3_resume NULL
1110 #endif /* CONFIG_PM */
1111
1112 static struct platform_driver abituguru3_driver = {
1113 .driver = {
1114 .owner = THIS_MODULE,
1115 .name = ABIT_UGURU3_NAME,
1116 },
1117 .probe = abituguru3_probe,
1118 .remove = __devexit_p(abituguru3_remove),
1119 .suspend = abituguru3_suspend,
1120 .resume = abituguru3_resume
1121 };
1122
1123 #ifdef CONFIG_DMI
1124
1125 static int __init abituguru3_dmi_detect(void)
1126 {
1127 const char *board_vendor, *board_name;
1128 int i, err = (force) ? 1 : -ENODEV;
1129 const char *const *dmi_name;
1130 size_t sublen;
1131
1132 board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
1133 if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
1134 return err;
1135
1136 board_name = dmi_get_system_info(DMI_BOARD_NAME);
1137 if (!board_name)
1138 return err;
1139
1140 /* At the moment, we don't care about the part of the vendor
1141 * DMI string contained in brackets. Truncate the string at
1142 * the first occurrence of a bracket. Trim any trailing space
1143 * from the substring.
1144 */
1145 sublen = strcspn(board_name, "(");
1146 while (sublen > 0 && board_name[sublen - 1] == ' ')
1147 sublen--;
1148
1149 for (i = 0; abituguru3_motherboards[i].id; i++) {
1150 dmi_name = abituguru3_motherboards[i].dmi_name;
1151 for ( ; *dmi_name; dmi_name++) {
1152 if (strlen(*dmi_name) != sublen)
1153 continue;
1154 if (!strncasecmp(board_name, *dmi_name, sublen))
1155 return 0;
1156 }
1157 }
1158
1159 /* No match found */
1160 return 1;
1161 }
1162
1163 #else /* !CONFIG_DMI */
1164
1165 static inline int abituguru3_dmi_detect(void)
1166 {
1167 return 1;
1168 }
1169
1170 #endif /* CONFIG_DMI */
1171
1172 /* FIXME: Manual detection should die eventually; we need to collect stable
1173 * DMI model names first before we can rely entirely on CONFIG_DMI.
1174 */
1175
1176 static int __init abituguru3_detect(void)
1177 {
1178 /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
1179 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
1180 or 0x55 at CMD instead, why is unknown. */
1181 u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
1182 u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
1183 if (((data_val == 0x00) || (data_val == 0x08)) &&
1184 ((cmd_val == 0xAC) || (cmd_val == 0x05) ||
1185 (cmd_val == 0x55)))
1186 return 0;
1187
1188 ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
1189 "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
1190
1191 if (force) {
1192 printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
1193 "present because of \"force\" parameter\n");
1194 return 0;
1195 }
1196
1197 /* No uGuru3 found */
1198 return -ENODEV;
1199 }
1200
1201 static struct platform_device *abituguru3_pdev;
1202
1203 static int __init abituguru3_init(void)
1204 {
1205 struct resource res = { .flags = IORESOURCE_IO };
1206 int err;
1207
1208 /* Attempt DMI detection first */
1209 err = abituguru3_dmi_detect();
1210 if (err < 0)
1211 return err;
1212
1213 /* Fall back to manual detection if there was no exact
1214 * board name match, or force was specified.
1215 */
1216 if (err > 0) {
1217 err = abituguru3_detect();
1218 if (err)
1219 return err;
1220
1221 #ifdef CONFIG_DMI
1222 printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
1223 "not detected using DMI. Please send the output of "
1224 "\"dmidecode\" to the abituguru3 maintainer "
1225 "(see MAINTAINERS)\n");
1226 #endif
1227 }
1228
1229 err = platform_driver_register(&abituguru3_driver);
1230 if (err)
1231 goto exit;
1232
1233 abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
1234 ABIT_UGURU3_BASE);
1235 if (!abituguru3_pdev) {
1236 printk(KERN_ERR ABIT_UGURU3_NAME
1237 ": Device allocation failed\n");
1238 err = -ENOMEM;
1239 goto exit_driver_unregister;
1240 }
1241
1242 res.start = ABIT_UGURU3_BASE;
1243 res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
1244 res.name = ABIT_UGURU3_NAME;
1245
1246 err = platform_device_add_resources(abituguru3_pdev, &res, 1);
1247 if (err) {
1248 printk(KERN_ERR ABIT_UGURU3_NAME
1249 ": Device resource addition failed (%d)\n", err);
1250 goto exit_device_put;
1251 }
1252
1253 err = platform_device_add(abituguru3_pdev);
1254 if (err) {
1255 printk(KERN_ERR ABIT_UGURU3_NAME
1256 ": Device addition failed (%d)\n", err);
1257 goto exit_device_put;
1258 }
1259
1260 return 0;
1261
1262 exit_device_put:
1263 platform_device_put(abituguru3_pdev);
1264 exit_driver_unregister:
1265 platform_driver_unregister(&abituguru3_driver);
1266 exit:
1267 return err;
1268 }
1269
1270 static void __exit abituguru3_exit(void)
1271 {
1272 platform_device_unregister(abituguru3_pdev);
1273 platform_driver_unregister(&abituguru3_driver);
1274 }
1275
1276 MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>");
1277 MODULE_DESCRIPTION("Abit uGuru3 Sensor device");
1278 MODULE_LICENSE("GPL");
1279
1280 module_init(abituguru3_init);
1281 module_exit(abituguru3_exit);
Linux with added FPC-III support