Staging: strip: delete the driver
[linux/fpc-iii.git] / drivers / hwmon / lm95241.c
blob8fc8eb8cba47400fd23614a392b135949aab8c76
1 /*
2 * lm95241.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring
4 * Copyright (C) 2008 Davide Rizzo <elpa-rizzo@gmail.com>
6 * Based on the max1619 driver. The LM95241 is a sensor chip made by National
7 * Semiconductors.
8 * It reports up to three temperatures (its own plus up to
9 * two external ones). Complete datasheet can be
10 * obtained from National's website at:
11 * http://www.national.com/ds.cgi/LM/LM95241.pdf
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/slab.h>
31 #include <linux/jiffies.h>
32 #include <linux/i2c.h>
33 #include <linux/hwmon.h>
34 #include <linux/hwmon-sysfs.h>
35 #include <linux/err.h>
36 #include <linux/mutex.h>
37 #include <linux/sysfs.h>
39 static const unsigned short normal_i2c[] = {
40 0x19, 0x2a, 0x2b, I2C_CLIENT_END};
42 /* LM95241 registers */
43 #define LM95241_REG_R_MAN_ID 0xFE
44 #define LM95241_REG_R_CHIP_ID 0xFF
45 #define LM95241_REG_R_STATUS 0x02
46 #define LM95241_REG_RW_CONFIG 0x03
47 #define LM95241_REG_RW_REM_FILTER 0x06
48 #define LM95241_REG_RW_TRUTHERM 0x07
49 #define LM95241_REG_W_ONE_SHOT 0x0F
50 #define LM95241_REG_R_LOCAL_TEMPH 0x10
51 #define LM95241_REG_R_REMOTE1_TEMPH 0x11
52 #define LM95241_REG_R_REMOTE2_TEMPH 0x12
53 #define LM95241_REG_R_LOCAL_TEMPL 0x20
54 #define LM95241_REG_R_REMOTE1_TEMPL 0x21
55 #define LM95241_REG_R_REMOTE2_TEMPL 0x22
56 #define LM95241_REG_RW_REMOTE_MODEL 0x30
58 /* LM95241 specific bitfields */
59 #define CFG_STOP 0x40
60 #define CFG_CR0076 0x00
61 #define CFG_CR0182 0x10
62 #define CFG_CR1000 0x20
63 #define CFG_CR2700 0x30
64 #define R1MS_SHIFT 0
65 #define R2MS_SHIFT 2
66 #define R1MS_MASK (0x01 << (R1MS_SHIFT))
67 #define R2MS_MASK (0x01 << (R2MS_SHIFT))
68 #define R1DF_SHIFT 1
69 #define R2DF_SHIFT 2
70 #define R1DF_MASK (0x01 << (R1DF_SHIFT))
71 #define R2DF_MASK (0x01 << (R2DF_SHIFT))
72 #define R1FE_MASK 0x01
73 #define R2FE_MASK 0x05
74 #define TT1_SHIFT 0
75 #define TT2_SHIFT 4
76 #define TT_OFF 0
77 #define TT_ON 1
78 #define TT_MASK 7
79 #define MANUFACTURER_ID 0x01
80 #define DEFAULT_REVISION 0xA4
82 /* Conversions and various macros */
83 #define TEMP_FROM_REG(val_h, val_l) (((val_h) & 0x80 ? (val_h) - 0x100 : \
84 (val_h)) * 1000 + (val_l) * 1000 / 256)
86 /* Functions declaration */
87 static void lm95241_init_client(struct i2c_client *client);
88 static struct lm95241_data *lm95241_update_device(struct device *dev);
90 /* Client data (each client gets its own) */
91 struct lm95241_data {
92 struct device *hwmon_dev;
93 struct mutex update_lock;
94 unsigned long last_updated, rate; /* in jiffies */
95 char valid; /* zero until following fields are valid */
96 /* registers values */
97 u8 local_h, local_l; /* local */
98 u8 remote1_h, remote1_l; /* remote1 */
99 u8 remote2_h, remote2_l; /* remote2 */
100 u8 config, model, trutherm;
103 /* Sysfs stuff */
104 #define show_temp(value) \
105 static ssize_t show_##value(struct device *dev, \
106 struct device_attribute *attr, char *buf) \
108 struct lm95241_data *data = lm95241_update_device(dev); \
109 snprintf(buf, PAGE_SIZE - 1, "%d\n", \
110 TEMP_FROM_REG(data->value##_h, data->value##_l)); \
111 return strlen(buf); \
113 show_temp(local);
114 show_temp(remote1);
115 show_temp(remote2);
117 static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
118 char *buf)
120 struct lm95241_data *data = lm95241_update_device(dev);
122 snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->rate / HZ);
123 return strlen(buf);
126 static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
127 const char *buf, size_t count)
129 struct i2c_client *client = to_i2c_client(dev);
130 struct lm95241_data *data = i2c_get_clientdata(client);
132 strict_strtol(buf, 10, &data->rate);
133 data->rate = data->rate * HZ / 1000;
135 return count;
138 #define show_type(flag) \
139 static ssize_t show_type##flag(struct device *dev, \
140 struct device_attribute *attr, char *buf) \
142 struct i2c_client *client = to_i2c_client(dev); \
143 struct lm95241_data *data = i2c_get_clientdata(client); \
145 snprintf(buf, PAGE_SIZE - 1, \
146 data->model & R##flag##MS_MASK ? "1\n" : "2\n"); \
147 return strlen(buf); \
149 show_type(1);
150 show_type(2);
152 #define show_min(flag) \
153 static ssize_t show_min##flag(struct device *dev, \
154 struct device_attribute *attr, char *buf) \
156 struct i2c_client *client = to_i2c_client(dev); \
157 struct lm95241_data *data = i2c_get_clientdata(client); \
159 snprintf(buf, PAGE_SIZE - 1, \
160 data->config & R##flag##DF_MASK ? \
161 "-127000\n" : "0\n"); \
162 return strlen(buf); \
164 show_min(1);
165 show_min(2);
167 #define show_max(flag) \
168 static ssize_t show_max##flag(struct device *dev, \
169 struct device_attribute *attr, char *buf) \
171 struct i2c_client *client = to_i2c_client(dev); \
172 struct lm95241_data *data = i2c_get_clientdata(client); \
174 snprintf(buf, PAGE_SIZE - 1, \
175 data->config & R##flag##DF_MASK ? \
176 "127000\n" : "255000\n"); \
177 return strlen(buf); \
179 show_max(1);
180 show_max(2);
182 #define set_type(flag) \
183 static ssize_t set_type##flag(struct device *dev, \
184 struct device_attribute *attr, \
185 const char *buf, size_t count) \
187 struct i2c_client *client = to_i2c_client(dev); \
188 struct lm95241_data *data = i2c_get_clientdata(client); \
190 long val; \
191 strict_strtol(buf, 10, &val); \
193 if ((val == 1) || (val == 2)) { \
195 mutex_lock(&data->update_lock); \
197 data->trutherm &= ~(TT_MASK << TT##flag##_SHIFT); \
198 if (val == 1) { \
199 data->model |= R##flag##MS_MASK; \
200 data->trutherm |= (TT_ON << TT##flag##_SHIFT); \
202 else { \
203 data->model &= ~R##flag##MS_MASK; \
204 data->trutherm |= (TT_OFF << TT##flag##_SHIFT); \
207 data->valid = 0; \
209 i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, \
210 data->model); \
211 i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, \
212 data->trutherm); \
214 mutex_unlock(&data->update_lock); \
217 return count; \
219 set_type(1);
220 set_type(2);
222 #define set_min(flag) \
223 static ssize_t set_min##flag(struct device *dev, \
224 struct device_attribute *devattr, const char *buf, size_t count) \
226 struct i2c_client *client = to_i2c_client(dev); \
227 struct lm95241_data *data = i2c_get_clientdata(client); \
229 long val; \
230 strict_strtol(buf, 10, &val); \
232 mutex_lock(&data->update_lock); \
234 if (val < 0) \
235 data->config |= R##flag##DF_MASK; \
236 else \
237 data->config &= ~R##flag##DF_MASK; \
239 data->valid = 0; \
241 i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
242 data->config); \
244 mutex_unlock(&data->update_lock); \
246 return count; \
248 set_min(1);
249 set_min(2);
251 #define set_max(flag) \
252 static ssize_t set_max##flag(struct device *dev, \
253 struct device_attribute *devattr, const char *buf, size_t count) \
255 struct i2c_client *client = to_i2c_client(dev); \
256 struct lm95241_data *data = i2c_get_clientdata(client); \
258 long val; \
259 strict_strtol(buf, 10, &val); \
261 mutex_lock(&data->update_lock); \
263 if (val <= 127000) \
264 data->config |= R##flag##DF_MASK; \
265 else \
266 data->config &= ~R##flag##DF_MASK; \
268 data->valid = 0; \
270 i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
271 data->config); \
273 mutex_unlock(&data->update_lock); \
275 return count; \
277 set_max(1);
278 set_max(2);
280 static DEVICE_ATTR(temp1_input, S_IRUGO, show_local, NULL);
281 static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote1, NULL);
282 static DEVICE_ATTR(temp3_input, S_IRUGO, show_remote2, NULL);
283 static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type1, set_type1);
284 static DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type2, set_type2);
285 static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1);
286 static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2);
287 static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1);
288 static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2);
289 static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, set_rate);
291 static struct attribute *lm95241_attributes[] = {
292 &dev_attr_temp1_input.attr,
293 &dev_attr_temp2_input.attr,
294 &dev_attr_temp3_input.attr,
295 &dev_attr_temp2_type.attr,
296 &dev_attr_temp3_type.attr,
297 &dev_attr_temp2_min.attr,
298 &dev_attr_temp3_min.attr,
299 &dev_attr_temp2_max.attr,
300 &dev_attr_temp3_max.attr,
301 &dev_attr_rate.attr,
302 NULL
305 static const struct attribute_group lm95241_group = {
306 .attrs = lm95241_attributes,
309 /* Return 0 if detection is successful, -ENODEV otherwise */
310 static int lm95241_detect(struct i2c_client *new_client,
311 struct i2c_board_info *info)
313 struct i2c_adapter *adapter = new_client->adapter;
314 int address = new_client->addr;
315 const char *name;
317 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
318 return -ENODEV;
320 if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
321 == MANUFACTURER_ID)
322 && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
323 >= DEFAULT_REVISION)) {
324 name = "lm95241";
325 } else {
326 dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
327 address);
328 return -ENODEV;
331 /* Fill the i2c board info */
332 strlcpy(info->type, name, I2C_NAME_SIZE);
333 return 0;
336 static int lm95241_probe(struct i2c_client *new_client,
337 const struct i2c_device_id *id)
339 struct lm95241_data *data;
340 int err;
342 data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL);
343 if (!data) {
344 err = -ENOMEM;
345 goto exit;
348 i2c_set_clientdata(new_client, data);
349 mutex_init(&data->update_lock);
351 /* Initialize the LM95241 chip */
352 lm95241_init_client(new_client);
354 /* Register sysfs hooks */
355 err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group);
356 if (err)
357 goto exit_free;
359 data->hwmon_dev = hwmon_device_register(&new_client->dev);
360 if (IS_ERR(data->hwmon_dev)) {
361 err = PTR_ERR(data->hwmon_dev);
362 goto exit_remove_files;
365 return 0;
367 exit_remove_files:
368 sysfs_remove_group(&new_client->dev.kobj, &lm95241_group);
369 exit_free:
370 kfree(data);
371 exit:
372 return err;
375 static void lm95241_init_client(struct i2c_client *client)
377 struct lm95241_data *data = i2c_get_clientdata(client);
379 data->rate = HZ; /* 1 sec default */
380 data->valid = 0;
381 data->config = CFG_CR0076;
382 data->model = 0;
383 data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
385 i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG,
386 data->config);
387 i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
388 R1FE_MASK | R2FE_MASK);
389 i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
390 data->trutherm);
391 i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
392 data->model);
395 static int lm95241_remove(struct i2c_client *client)
397 struct lm95241_data *data = i2c_get_clientdata(client);
399 hwmon_device_unregister(data->hwmon_dev);
400 sysfs_remove_group(&client->dev.kobj, &lm95241_group);
402 i2c_set_clientdata(client, NULL);
403 kfree(data);
404 return 0;
407 static struct lm95241_data *lm95241_update_device(struct device *dev)
409 struct i2c_client *client = to_i2c_client(dev);
410 struct lm95241_data *data = i2c_get_clientdata(client);
412 mutex_lock(&data->update_lock);
414 if (time_after(jiffies, data->last_updated + data->rate) ||
415 !data->valid) {
416 dev_dbg(&client->dev, "Updating lm95241 data.\n");
417 data->local_h =
418 i2c_smbus_read_byte_data(client,
419 LM95241_REG_R_LOCAL_TEMPH);
420 data->local_l =
421 i2c_smbus_read_byte_data(client,
422 LM95241_REG_R_LOCAL_TEMPL);
423 data->remote1_h =
424 i2c_smbus_read_byte_data(client,
425 LM95241_REG_R_REMOTE1_TEMPH);
426 data->remote1_l =
427 i2c_smbus_read_byte_data(client,
428 LM95241_REG_R_REMOTE1_TEMPL);
429 data->remote2_h =
430 i2c_smbus_read_byte_data(client,
431 LM95241_REG_R_REMOTE2_TEMPH);
432 data->remote2_l =
433 i2c_smbus_read_byte_data(client,
434 LM95241_REG_R_REMOTE2_TEMPL);
435 data->last_updated = jiffies;
436 data->valid = 1;
439 mutex_unlock(&data->update_lock);
441 return data;
444 /* Driver data (common to all clients) */
445 static const struct i2c_device_id lm95241_id[] = {
446 { "lm95241", 0 },
449 MODULE_DEVICE_TABLE(i2c, lm95241_id);
451 static struct i2c_driver lm95241_driver = {
452 .class = I2C_CLASS_HWMON,
453 .driver = {
454 .name = "lm95241",
456 .probe = lm95241_probe,
457 .remove = lm95241_remove,
458 .id_table = lm95241_id,
459 .detect = lm95241_detect,
460 .address_list = normal_i2c,
463 static int __init sensors_lm95241_init(void)
465 return i2c_add_driver(&lm95241_driver);
468 static void __exit sensors_lm95241_exit(void)
470 i2c_del_driver(&lm95241_driver);
473 MODULE_AUTHOR("Davide Rizzo <elpa-rizzo@gmail.com>");
474 MODULE_DESCRIPTION("LM95241 sensor driver");
475 MODULE_LICENSE("GPL");
477 module_init(sensors_lm95241_init);
478 module_exit(sensors_lm95241_exit);