Staging: strip: delete the driver
[linux/fpc-iii.git] / drivers / hwmon / smsc47m1.c
blob8fa462f2b570e7c8692d62bbcc5ff5cb8675d781
1 /*
2 smsc47m1.c - Part of lm_sensors, Linux kernel modules
3 for hardware monitoring
5 Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
6 LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997
7 Super-I/O chips.
9 Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
10 Copyright (C) 2004-2007 Jean Delvare <khali@linux-fr.org>
11 Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
12 and Jean Delvare
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; either version 2 of the License, or
17 (at your option) any later version.
19 This program is distributed in the hope that it will be useful,
20 but WITHOUT ANY WARRANTY; without even the implied warranty of
21 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 GNU General Public License for more details.
24 You should have received a copy of the GNU General Public License
25 along with this program; if not, write to the Free Software
26 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 #include <linux/module.h>
30 #include <linux/slab.h>
31 #include <linux/ioport.h>
32 #include <linux/jiffies.h>
33 #include <linux/platform_device.h>
34 #include <linux/hwmon.h>
35 #include <linux/hwmon-sysfs.h>
36 #include <linux/err.h>
37 #include <linux/init.h>
38 #include <linux/mutex.h>
39 #include <linux/sysfs.h>
40 #include <linux/acpi.h>
41 #include <linux/io.h>
43 static unsigned short force_id;
44 module_param(force_id, ushort, 0);
45 MODULE_PARM_DESC(force_id, "Override the detected device ID");
47 static struct platform_device *pdev;
49 #define DRVNAME "smsc47m1"
50 enum chips { smsc47m1, smsc47m2 };
52 /* Super-I/0 registers and commands */
54 #define REG 0x2e /* The register to read/write */
55 #define VAL 0x2f /* The value to read/write */
57 static inline void
58 superio_outb(int reg, int val)
60 outb(reg, REG);
61 outb(val, VAL);
64 static inline int
65 superio_inb(int reg)
67 outb(reg, REG);
68 return inb(VAL);
71 /* logical device for fans is 0x0A */
72 #define superio_select() superio_outb(0x07, 0x0A)
74 static inline void
75 superio_enter(void)
77 outb(0x55, REG);
80 static inline void
81 superio_exit(void)
83 outb(0xAA, REG);
86 #define SUPERIO_REG_ACT 0x30
87 #define SUPERIO_REG_BASE 0x60
88 #define SUPERIO_REG_DEVID 0x20
89 #define SUPERIO_REG_DEVREV 0x21
91 /* Logical device registers */
93 #define SMSC_EXTENT 0x80
95 /* nr is 0 or 1 in the macros below */
96 #define SMSC47M1_REG_ALARM 0x04
97 #define SMSC47M1_REG_TPIN(nr) (0x34 - (nr))
98 #define SMSC47M1_REG_PPIN(nr) (0x36 - (nr))
99 #define SMSC47M1_REG_FANDIV 0x58
101 static const u8 SMSC47M1_REG_FAN[3] = { 0x59, 0x5a, 0x6b };
102 static const u8 SMSC47M1_REG_FAN_PRELOAD[3] = { 0x5b, 0x5c, 0x6c };
103 static const u8 SMSC47M1_REG_PWM[3] = { 0x56, 0x57, 0x69 };
105 #define SMSC47M2_REG_ALARM6 0x09
106 #define SMSC47M2_REG_TPIN1 0x38
107 #define SMSC47M2_REG_TPIN2 0x37
108 #define SMSC47M2_REG_TPIN3 0x2d
109 #define SMSC47M2_REG_PPIN3 0x2c
110 #define SMSC47M2_REG_FANDIV3 0x6a
112 #define MIN_FROM_REG(reg,div) ((reg)>=192 ? 0 : \
113 983040/((192-(reg))*(div)))
114 #define FAN_FROM_REG(reg,div,preload) ((reg)<=(preload) || (reg)==255 ? 0 : \
115 983040/(((reg)-(preload))*(div)))
116 #define DIV_FROM_REG(reg) (1 << (reg))
117 #define PWM_FROM_REG(reg) (((reg) & 0x7E) << 1)
118 #define PWM_EN_FROM_REG(reg) ((~(reg)) & 0x01)
119 #define PWM_TO_REG(reg) (((reg) >> 1) & 0x7E)
121 struct smsc47m1_data {
122 unsigned short addr;
123 const char *name;
124 enum chips type;
125 struct device *hwmon_dev;
127 struct mutex update_lock;
128 unsigned long last_updated; /* In jiffies */
130 u8 fan[3]; /* Register value */
131 u8 fan_preload[3]; /* Register value */
132 u8 fan_div[3]; /* Register encoding, shifted right */
133 u8 alarms; /* Register encoding */
134 u8 pwm[3]; /* Register value (bit 0 is disable) */
137 struct smsc47m1_sio_data {
138 enum chips type;
139 u8 activate; /* Remember initial device state */
143 static int __exit smsc47m1_remove(struct platform_device *pdev);
144 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
145 int init);
147 static inline int smsc47m1_read_value(struct smsc47m1_data *data, u8 reg)
149 return inb_p(data->addr + reg);
152 static inline void smsc47m1_write_value(struct smsc47m1_data *data, u8 reg,
153 u8 value)
155 outb_p(value, data->addr + reg);
158 static struct platform_driver smsc47m1_driver = {
159 .driver = {
160 .owner = THIS_MODULE,
161 .name = DRVNAME,
163 .remove = __exit_p(smsc47m1_remove),
166 static ssize_t get_fan(struct device *dev, struct device_attribute
167 *devattr, char *buf)
169 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
170 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
171 int nr = attr->index;
172 /* This chip (stupidly) stops monitoring fan speed if PWM is
173 enabled and duty cycle is 0%. This is fine if the monitoring
174 and control concern the same fan, but troublesome if they are
175 not (which could as well happen). */
176 int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
177 FAN_FROM_REG(data->fan[nr],
178 DIV_FROM_REG(data->fan_div[nr]),
179 data->fan_preload[nr]);
180 return sprintf(buf, "%d\n", rpm);
183 static ssize_t get_fan_min(struct device *dev, struct device_attribute
184 *devattr, char *buf)
186 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
187 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
188 int nr = attr->index;
189 int rpm = MIN_FROM_REG(data->fan_preload[nr],
190 DIV_FROM_REG(data->fan_div[nr]));
191 return sprintf(buf, "%d\n", rpm);
194 static ssize_t get_fan_div(struct device *dev, struct device_attribute
195 *devattr, char *buf)
197 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
198 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
199 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
202 static ssize_t get_fan_alarm(struct device *dev, struct device_attribute
203 *devattr, char *buf)
205 int bitnr = to_sensor_dev_attr(devattr)->index;
206 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
207 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
210 static ssize_t get_pwm(struct device *dev, struct device_attribute
211 *devattr, char *buf)
213 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
214 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
215 return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index]));
218 static ssize_t get_pwm_en(struct device *dev, struct device_attribute
219 *devattr, char *buf)
221 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
222 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
223 return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[attr->index]));
226 static ssize_t get_alarms(struct device *dev, struct device_attribute
227 *devattr, char *buf)
229 struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
230 return sprintf(buf, "%d\n", data->alarms);
233 static ssize_t set_fan_min(struct device *dev, struct device_attribute
234 *devattr, const char *buf, size_t count)
236 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
237 struct smsc47m1_data *data = dev_get_drvdata(dev);
238 int nr = attr->index;
239 long rpmdiv, val = simple_strtol(buf, NULL, 10);
241 mutex_lock(&data->update_lock);
242 rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
244 if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
245 mutex_unlock(&data->update_lock);
246 return -EINVAL;
249 data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
250 smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
251 data->fan_preload[nr]);
252 mutex_unlock(&data->update_lock);
254 return count;
257 /* Note: we save and restore the fan minimum here, because its value is
258 determined in part by the fan clock divider. This follows the principle
259 of least surprise; the user doesn't expect the fan minimum to change just
260 because the divider changed. */
261 static ssize_t set_fan_div(struct device *dev, struct device_attribute
262 *devattr, const char *buf, size_t count)
264 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
265 struct smsc47m1_data *data = dev_get_drvdata(dev);
266 int nr = attr->index;
267 long new_div = simple_strtol(buf, NULL, 10), tmp;
268 u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
270 if (new_div == old_div) /* No change */
271 return count;
273 mutex_lock(&data->update_lock);
274 switch (new_div) {
275 case 1: data->fan_div[nr] = 0; break;
276 case 2: data->fan_div[nr] = 1; break;
277 case 4: data->fan_div[nr] = 2; break;
278 case 8: data->fan_div[nr] = 3; break;
279 default:
280 mutex_unlock(&data->update_lock);
281 return -EINVAL;
284 switch (nr) {
285 case 0:
286 case 1:
287 tmp = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV)
288 & ~(0x03 << (4 + 2 * nr));
289 tmp |= data->fan_div[nr] << (4 + 2 * nr);
290 smsc47m1_write_value(data, SMSC47M1_REG_FANDIV, tmp);
291 break;
292 case 2:
293 tmp = smsc47m1_read_value(data, SMSC47M2_REG_FANDIV3) & 0xCF;
294 tmp |= data->fan_div[2] << 4;
295 smsc47m1_write_value(data, SMSC47M2_REG_FANDIV3, tmp);
296 break;
299 /* Preserve fan min */
300 tmp = 192 - (old_div * (192 - data->fan_preload[nr])
301 + new_div / 2) / new_div;
302 data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
303 smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
304 data->fan_preload[nr]);
305 mutex_unlock(&data->update_lock);
307 return count;
310 static ssize_t set_pwm(struct device *dev, struct device_attribute
311 *devattr, const char *buf, size_t count)
313 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
314 struct smsc47m1_data *data = dev_get_drvdata(dev);
315 int nr = attr->index;
316 long val = simple_strtol(buf, NULL, 10);
318 if (val < 0 || val > 255)
319 return -EINVAL;
321 mutex_lock(&data->update_lock);
322 data->pwm[nr] &= 0x81; /* Preserve additional bits */
323 data->pwm[nr] |= PWM_TO_REG(val);
324 smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
325 data->pwm[nr]);
326 mutex_unlock(&data->update_lock);
328 return count;
331 static ssize_t set_pwm_en(struct device *dev, struct device_attribute
332 *devattr, const char *buf, size_t count)
334 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
335 struct smsc47m1_data *data = dev_get_drvdata(dev);
336 int nr = attr->index;
337 long val = simple_strtol(buf, NULL, 10);
339 if (val != 0 && val != 1)
340 return -EINVAL;
342 mutex_lock(&data->update_lock);
343 data->pwm[nr] &= 0xFE; /* preserve the other bits */
344 data->pwm[nr] |= !val;
345 smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
346 data->pwm[nr]);
347 mutex_unlock(&data->update_lock);
349 return count;
352 #define fan_present(offset) \
353 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan, \
354 NULL, offset - 1); \
355 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
356 get_fan_min, set_fan_min, offset - 1); \
357 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
358 get_fan_div, set_fan_div, offset - 1); \
359 static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm, \
360 NULL, offset - 1); \
361 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
362 get_pwm, set_pwm, offset - 1); \
363 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
364 get_pwm_en, set_pwm_en, offset - 1)
366 fan_present(1);
367 fan_present(2);
368 fan_present(3);
370 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
372 static ssize_t show_name(struct device *dev, struct device_attribute
373 *devattr, char *buf)
375 struct smsc47m1_data *data = dev_get_drvdata(dev);
377 return sprintf(buf, "%s\n", data->name);
379 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
381 /* Almost all sysfs files may or may not be created depending on the chip
382 setup so we create them individually. It is still convenient to define a
383 group to remove them all at once. */
384 static struct attribute *smsc47m1_attributes[] = {
385 &sensor_dev_attr_fan1_input.dev_attr.attr,
386 &sensor_dev_attr_fan1_min.dev_attr.attr,
387 &sensor_dev_attr_fan1_div.dev_attr.attr,
388 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
389 &sensor_dev_attr_fan2_input.dev_attr.attr,
390 &sensor_dev_attr_fan2_min.dev_attr.attr,
391 &sensor_dev_attr_fan2_div.dev_attr.attr,
392 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
393 &sensor_dev_attr_fan3_input.dev_attr.attr,
394 &sensor_dev_attr_fan3_min.dev_attr.attr,
395 &sensor_dev_attr_fan3_div.dev_attr.attr,
396 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
398 &sensor_dev_attr_pwm1.dev_attr.attr,
399 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
400 &sensor_dev_attr_pwm2.dev_attr.attr,
401 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
402 &sensor_dev_attr_pwm3.dev_attr.attr,
403 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
405 &dev_attr_alarms.attr,
406 &dev_attr_name.attr,
407 NULL
410 static const struct attribute_group smsc47m1_group = {
411 .attrs = smsc47m1_attributes,
414 static int __init smsc47m1_find(unsigned short *addr,
415 struct smsc47m1_sio_data *sio_data)
417 u8 val;
419 superio_enter();
420 val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
423 * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
424 * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
425 * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
426 * can do much more besides (device id 0x60).
427 * The LPC47M997 is undocumented, but seems to be compatible with
428 * the LPC47M192, and has the same device id.
429 * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
430 * supports a 3rd fan, and the pin configuration registers are
431 * unfortunately different.
432 * The LPC47M233 has the same device id (0x6B) but is not compatible.
433 * We check the high bit of the device revision register to
434 * differentiate them.
436 switch (val) {
437 case 0x51:
438 pr_info(DRVNAME ": Found SMSC LPC47B27x\n");
439 sio_data->type = smsc47m1;
440 break;
441 case 0x59:
442 pr_info(DRVNAME ": Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
443 sio_data->type = smsc47m1;
444 break;
445 case 0x5F:
446 pr_info(DRVNAME ": Found SMSC LPC47M14x\n");
447 sio_data->type = smsc47m1;
448 break;
449 case 0x60:
450 pr_info(DRVNAME ": Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
451 sio_data->type = smsc47m1;
452 break;
453 case 0x6B:
454 if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
455 pr_debug(DRVNAME ": "
456 "Found SMSC LPC47M233, unsupported\n");
457 superio_exit();
458 return -ENODEV;
461 pr_info(DRVNAME ": Found SMSC LPC47M292\n");
462 sio_data->type = smsc47m2;
463 break;
464 default:
465 superio_exit();
466 return -ENODEV;
469 superio_select();
470 *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
471 | superio_inb(SUPERIO_REG_BASE + 1);
472 if (*addr == 0) {
473 pr_info(DRVNAME ": Device address not set, will not use\n");
474 superio_exit();
475 return -ENODEV;
478 /* Enable only if address is set (needed at least on the
479 * Compaq Presario S4000NX) */
480 sio_data->activate = superio_inb(SUPERIO_REG_ACT);
481 if ((sio_data->activate & 0x01) == 0) {
482 pr_info(DRVNAME ": Enabling device\n");
483 superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01);
486 superio_exit();
487 return 0;
490 /* Restore device to its initial state */
491 static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
493 if ((sio_data->activate & 0x01) == 0) {
494 superio_enter();
495 superio_select();
497 pr_info(DRVNAME ": Disabling device\n");
498 superio_outb(SUPERIO_REG_ACT, sio_data->activate);
500 superio_exit();
504 #define CHECK 1
505 #define REQUEST 2
506 #define RELEASE 3
509 * This function can be used to:
510 * - test for resource conflicts with ACPI
511 * - request the resources
512 * - release the resources
513 * We only allocate the I/O ports we really need, to minimize the risk of
514 * conflicts with ACPI or with other drivers.
516 static int smsc47m1_handle_resources(unsigned short address, enum chips type,
517 int action, struct device *dev)
519 static const u8 ports_m1[] = {
520 /* register, region length */
521 0x04, 1,
522 0x33, 4,
523 0x56, 7,
526 static const u8 ports_m2[] = {
527 /* register, region length */
528 0x04, 1,
529 0x09, 1,
530 0x2c, 2,
531 0x35, 4,
532 0x56, 7,
533 0x69, 4,
536 int i, ports_size, err;
537 const u8 *ports;
539 switch (type) {
540 case smsc47m1:
541 default:
542 ports = ports_m1;
543 ports_size = ARRAY_SIZE(ports_m1);
544 break;
545 case smsc47m2:
546 ports = ports_m2;
547 ports_size = ARRAY_SIZE(ports_m2);
548 break;
551 for (i = 0; i + 1 < ports_size; i += 2) {
552 unsigned short start = address + ports[i];
553 unsigned short len = ports[i + 1];
555 switch (action) {
556 case CHECK:
557 /* Only check for conflicts */
558 err = acpi_check_region(start, len, DRVNAME);
559 if (err)
560 return err;
561 break;
562 case REQUEST:
563 /* Request the resources */
564 if (!request_region(start, len, DRVNAME)) {
565 dev_err(dev, "Region 0x%hx-0x%hx already in "
566 "use!\n", start, start + len);
568 /* Undo all requests */
569 for (i -= 2; i >= 0; i -= 2)
570 release_region(address + ports[i],
571 ports[i + 1]);
572 return -EBUSY;
574 break;
575 case RELEASE:
576 /* Release the resources */
577 release_region(start, len);
578 break;
582 return 0;
585 static int __init smsc47m1_probe(struct platform_device *pdev)
587 struct device *dev = &pdev->dev;
588 struct smsc47m1_sio_data *sio_data = dev->platform_data;
589 struct smsc47m1_data *data;
590 struct resource *res;
591 int err;
592 int fan1, fan2, fan3, pwm1, pwm2, pwm3;
594 static const char *names[] = {
595 "smsc47m1",
596 "smsc47m2",
599 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
600 err = smsc47m1_handle_resources(res->start, sio_data->type,
601 REQUEST, dev);
602 if (err < 0)
603 return err;
605 if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
606 err = -ENOMEM;
607 goto error_release;
610 data->addr = res->start;
611 data->type = sio_data->type;
612 data->name = names[sio_data->type];
613 mutex_init(&data->update_lock);
614 platform_set_drvdata(pdev, data);
616 /* If no function is properly configured, there's no point in
617 actually registering the chip. */
618 pwm1 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(0)) & 0x05)
619 == 0x04;
620 pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05)
621 == 0x04;
622 if (data->type == smsc47m2) {
623 fan1 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN1)
624 & 0x0d) == 0x09;
625 fan2 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN2)
626 & 0x0d) == 0x09;
627 fan3 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN3)
628 & 0x0d) == 0x0d;
629 pwm3 = (smsc47m1_read_value(data, SMSC47M2_REG_PPIN3)
630 & 0x0d) == 0x08;
631 } else {
632 fan1 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(0))
633 & 0x05) == 0x05;
634 fan2 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(1))
635 & 0x05) == 0x05;
636 fan3 = 0;
637 pwm3 = 0;
639 if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) {
640 dev_warn(dev, "Device not configured, will not use\n");
641 err = -ENODEV;
642 goto error_free;
645 /* Some values (fan min, clock dividers, pwm registers) may be
646 needed before any update is triggered, so we better read them
647 at least once here. We don't usually do it that way, but in
648 this particular case, manually reading 5 registers out of 8
649 doesn't make much sense and we're better using the existing
650 function. */
651 smsc47m1_update_device(dev, 1);
653 /* Register sysfs hooks */
654 if (fan1) {
655 if ((err = device_create_file(dev,
656 &sensor_dev_attr_fan1_input.dev_attr))
657 || (err = device_create_file(dev,
658 &sensor_dev_attr_fan1_min.dev_attr))
659 || (err = device_create_file(dev,
660 &sensor_dev_attr_fan1_div.dev_attr))
661 || (err = device_create_file(dev,
662 &sensor_dev_attr_fan1_alarm.dev_attr)))
663 goto error_remove_files;
664 } else
665 dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
667 if (fan2) {
668 if ((err = device_create_file(dev,
669 &sensor_dev_attr_fan2_input.dev_attr))
670 || (err = device_create_file(dev,
671 &sensor_dev_attr_fan2_min.dev_attr))
672 || (err = device_create_file(dev,
673 &sensor_dev_attr_fan2_div.dev_attr))
674 || (err = device_create_file(dev,
675 &sensor_dev_attr_fan2_alarm.dev_attr)))
676 goto error_remove_files;
677 } else
678 dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
680 if (fan3) {
681 if ((err = device_create_file(dev,
682 &sensor_dev_attr_fan3_input.dev_attr))
683 || (err = device_create_file(dev,
684 &sensor_dev_attr_fan3_min.dev_attr))
685 || (err = device_create_file(dev,
686 &sensor_dev_attr_fan3_div.dev_attr))
687 || (err = device_create_file(dev,
688 &sensor_dev_attr_fan3_alarm.dev_attr)))
689 goto error_remove_files;
690 } else if (data->type == smsc47m2)
691 dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
693 if (pwm1) {
694 if ((err = device_create_file(dev,
695 &sensor_dev_attr_pwm1.dev_attr))
696 || (err = device_create_file(dev,
697 &sensor_dev_attr_pwm1_enable.dev_attr)))
698 goto error_remove_files;
699 } else
700 dev_dbg(dev, "PWM 1 not enabled by hardware, skipping\n");
702 if (pwm2) {
703 if ((err = device_create_file(dev,
704 &sensor_dev_attr_pwm2.dev_attr))
705 || (err = device_create_file(dev,
706 &sensor_dev_attr_pwm2_enable.dev_attr)))
707 goto error_remove_files;
708 } else
709 dev_dbg(dev, "PWM 2 not enabled by hardware, skipping\n");
711 if (pwm3) {
712 if ((err = device_create_file(dev,
713 &sensor_dev_attr_pwm3.dev_attr))
714 || (err = device_create_file(dev,
715 &sensor_dev_attr_pwm3_enable.dev_attr)))
716 goto error_remove_files;
717 } else if (data->type == smsc47m2)
718 dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n");
720 if ((err = device_create_file(dev, &dev_attr_alarms)))
721 goto error_remove_files;
722 if ((err = device_create_file(dev, &dev_attr_name)))
723 goto error_remove_files;
725 data->hwmon_dev = hwmon_device_register(dev);
726 if (IS_ERR(data->hwmon_dev)) {
727 err = PTR_ERR(data->hwmon_dev);
728 goto error_remove_files;
731 return 0;
733 error_remove_files:
734 sysfs_remove_group(&dev->kobj, &smsc47m1_group);
735 error_free:
736 platform_set_drvdata(pdev, NULL);
737 kfree(data);
738 error_release:
739 smsc47m1_handle_resources(res->start, sio_data->type, RELEASE, dev);
740 return err;
743 static int __exit smsc47m1_remove(struct platform_device *pdev)
745 struct smsc47m1_data *data = platform_get_drvdata(pdev);
746 struct resource *res;
748 hwmon_device_unregister(data->hwmon_dev);
749 sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
751 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
752 smsc47m1_handle_resources(res->start, data->type, RELEASE, &pdev->dev);
753 platform_set_drvdata(pdev, NULL);
754 kfree(data);
756 return 0;
759 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
760 int init)
762 struct smsc47m1_data *data = dev_get_drvdata(dev);
764 mutex_lock(&data->update_lock);
766 if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
767 int i, fan_nr;
768 fan_nr = data->type == smsc47m2 ? 3 : 2;
770 for (i = 0; i < fan_nr; i++) {
771 data->fan[i] = smsc47m1_read_value(data,
772 SMSC47M1_REG_FAN[i]);
773 data->fan_preload[i] = smsc47m1_read_value(data,
774 SMSC47M1_REG_FAN_PRELOAD[i]);
775 data->pwm[i] = smsc47m1_read_value(data,
776 SMSC47M1_REG_PWM[i]);
779 i = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV);
780 data->fan_div[0] = (i >> 4) & 0x03;
781 data->fan_div[1] = i >> 6;
783 data->alarms = smsc47m1_read_value(data,
784 SMSC47M1_REG_ALARM) >> 6;
785 /* Clear alarms if needed */
786 if (data->alarms)
787 smsc47m1_write_value(data, SMSC47M1_REG_ALARM, 0xC0);
789 if (fan_nr >= 3) {
790 data->fan_div[2] = (smsc47m1_read_value(data,
791 SMSC47M2_REG_FANDIV3) >> 4) & 0x03;
792 data->alarms |= (smsc47m1_read_value(data,
793 SMSC47M2_REG_ALARM6) & 0x40) >> 4;
794 /* Clear alarm if needed */
795 if (data->alarms & 0x04)
796 smsc47m1_write_value(data,
797 SMSC47M2_REG_ALARM6,
798 0x40);
801 data->last_updated = jiffies;
804 mutex_unlock(&data->update_lock);
805 return data;
808 static int __init smsc47m1_device_add(unsigned short address,
809 const struct smsc47m1_sio_data *sio_data)
811 struct resource res = {
812 .start = address,
813 .end = address + SMSC_EXTENT - 1,
814 .name = DRVNAME,
815 .flags = IORESOURCE_IO,
817 int err;
819 err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL);
820 if (err)
821 goto exit;
823 pdev = platform_device_alloc(DRVNAME, address);
824 if (!pdev) {
825 err = -ENOMEM;
826 printk(KERN_ERR DRVNAME ": Device allocation failed\n");
827 goto exit;
830 err = platform_device_add_resources(pdev, &res, 1);
831 if (err) {
832 printk(KERN_ERR DRVNAME ": Device resource addition failed "
833 "(%d)\n", err);
834 goto exit_device_put;
837 err = platform_device_add_data(pdev, sio_data,
838 sizeof(struct smsc47m1_sio_data));
839 if (err) {
840 printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
841 goto exit_device_put;
844 err = platform_device_add(pdev);
845 if (err) {
846 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
847 err);
848 goto exit_device_put;
851 return 0;
853 exit_device_put:
854 platform_device_put(pdev);
855 exit:
856 return err;
859 static int __init sm_smsc47m1_init(void)
861 int err;
862 unsigned short address;
863 struct smsc47m1_sio_data sio_data;
865 if (smsc47m1_find(&address, &sio_data))
866 return -ENODEV;
868 /* Sets global pdev as a side effect */
869 err = smsc47m1_device_add(address, &sio_data);
870 if (err)
871 goto exit;
873 err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe);
874 if (err)
875 goto exit_device;
877 return 0;
879 exit_device:
880 platform_device_unregister(pdev);
881 smsc47m1_restore(&sio_data);
882 exit:
883 return err;
886 static void __exit sm_smsc47m1_exit(void)
888 platform_driver_unregister(&smsc47m1_driver);
889 smsc47m1_restore(pdev->dev.platform_data);
890 platform_device_unregister(pdev);
893 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
894 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
895 MODULE_LICENSE("GPL");
897 module_init(sm_smsc47m1_init);
898 module_exit(sm_smsc47m1_exit);