2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
26 * http://www.ivtvdriver.org
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-gpio.h"
58 #include <media/tveeprom.h>
59 #include <media/saa7115.h>
60 #include <media/v4l2-chip-ident.h>
61 #include "tuner-xc2028.h"
63 /* If you have already X v4l cards, then set this to X. This way
64 the device numbers stay matched. Example: you have a WinTV card
65 without radio and a PVR-350 with. Normally this would give a
66 video1 device together with a radio0 device for the PVR. By
67 setting this to 1 you ensure that radio0 is now also radio1. */
70 /* add your revision and whatnot here */
71 static struct pci_device_id ivtv_pci_tbl
[] __devinitdata
= {
72 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV15
,
73 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
74 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV16
,
75 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
79 MODULE_DEVICE_TABLE(pci
,ivtv_pci_tbl
);
81 /* ivtv instance counter */
82 static atomic_t ivtv_instance
= ATOMIC_INIT(0);
84 /* Parameter declarations */
85 static int cardtype
[IVTV_MAX_CARDS
];
86 static int tuner
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
87 -1, -1, -1, -1, -1, -1, -1, -1,
88 -1, -1, -1, -1, -1, -1, -1, -1,
89 -1, -1, -1, -1, -1, -1, -1, -1 };
90 static int radio
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
91 -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1 };
94 static int i2c_clock_period
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
95 -1, -1, -1, -1, -1, -1, -1, -1,
96 -1, -1, -1, -1, -1, -1, -1, -1,
97 -1, -1, -1, -1, -1, -1, -1, -1 };
99 static unsigned int cardtype_c
= 1;
100 static unsigned int tuner_c
= 1;
101 static unsigned int radio_c
= 1;
102 static unsigned int i2c_clock_period_c
= 1;
103 static char pal
[] = "---";
104 static char secam
[] = "--";
105 static char ntsc
[] = "-";
109 /* DMA Buffers, Default size in MB allocated */
110 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
111 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
112 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
113 /* Exception: size in kB for this stream (MB is overkill) */
114 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
115 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
116 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
117 /* Exception: size in kB for this stream (MB is way overkill) */
118 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
120 static int enc_mpg_buffers
= IVTV_DEFAULT_ENC_MPG_BUFFERS
;
121 static int enc_yuv_buffers
= IVTV_DEFAULT_ENC_YUV_BUFFERS
;
122 static int enc_vbi_buffers
= IVTV_DEFAULT_ENC_VBI_BUFFERS
;
123 static int enc_pcm_buffers
= IVTV_DEFAULT_ENC_PCM_BUFFERS
;
124 static int dec_mpg_buffers
= IVTV_DEFAULT_DEC_MPG_BUFFERS
;
125 static int dec_yuv_buffers
= IVTV_DEFAULT_DEC_YUV_BUFFERS
;
126 static int dec_vbi_buffers
= IVTV_DEFAULT_DEC_VBI_BUFFERS
;
128 static int ivtv_yuv_mode
;
129 static int ivtv_yuv_threshold
= -1;
130 static int ivtv_pci_latency
= 1;
134 static int tunertype
= -1;
135 static int newi2c
= -1;
137 module_param_array(tuner
, int, &tuner_c
, 0644);
138 module_param_array(radio
, bool, &radio_c
, 0644);
139 module_param_array(cardtype
, int, &cardtype_c
, 0644);
140 module_param_string(pal
, pal
, sizeof(pal
), 0644);
141 module_param_string(secam
, secam
, sizeof(secam
), 0644);
142 module_param_string(ntsc
, ntsc
, sizeof(ntsc
), 0644);
143 module_param_named(debug
,ivtv_debug
, int, 0644);
144 module_param(ivtv_pci_latency
, int, 0644);
145 module_param(ivtv_yuv_mode
, int, 0644);
146 module_param(ivtv_yuv_threshold
, int, 0644);
147 module_param(ivtv_first_minor
, int, 0644);
149 module_param(enc_mpg_buffers
, int, 0644);
150 module_param(enc_yuv_buffers
, int, 0644);
151 module_param(enc_vbi_buffers
, int, 0644);
152 module_param(enc_pcm_buffers
, int, 0644);
153 module_param(dec_mpg_buffers
, int, 0644);
154 module_param(dec_yuv_buffers
, int, 0644);
155 module_param(dec_vbi_buffers
, int, 0644);
157 module_param(tunertype
, int, 0644);
158 module_param(newi2c
, int, 0644);
159 module_param_array(i2c_clock_period
, int, &i2c_clock_period_c
, 0644);
161 MODULE_PARM_DESC(tuner
, "Tuner type selection,\n"
162 "\t\t\tsee tuner.h for values");
163 MODULE_PARM_DESC(radio
,
164 "Enable or disable the radio. Use only if autodetection\n"
165 "\t\t\tfails. 0 = disable, 1 = enable");
166 MODULE_PARM_DESC(cardtype
,
167 "Only use this option if your card is not detected properly.\n"
168 "\t\tSpecify card type:\n"
169 "\t\t\t 1 = WinTV PVR 250\n"
170 "\t\t\t 2 = WinTV PVR 350\n"
171 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
172 "\t\t\t 4 = AVerMedia M179\n"
173 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
174 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
175 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
176 "\t\t\t 8 = Adaptec AVC-2410\n"
177 "\t\t\t 9 = Adaptec AVC-2010\n"
178 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
179 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
180 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
181 "\t\t\t13 = I/O Data GV-MVP/RX\n"
182 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
183 "\t\t\t15 = GOTVIEW PCI DVD\n"
184 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
185 "\t\t\t17 = Yuan MPC622\n"
186 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
187 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
188 "\t\t\t20 = Club3D ZAP-TV1x01\n"
189 "\t\t\t21 = AverTV MCE 116 Plus\n"
190 "\t\t\t22 = ASUS Falcon2\n"
191 "\t\t\t23 = AverMedia PVR-150 Plus\n"
192 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
193 "\t\t\t25 = AverMedia M104 (not yet working)\n"
194 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
195 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
196 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
197 "\t\t\t 0 = Autodetect (default)\n"
198 "\t\t\t-1 = Ignore this card\n\t\t");
199 MODULE_PARM_DESC(pal
, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
200 MODULE_PARM_DESC(secam
, "Set SECAM standard: BGH, DK, L, LC");
201 MODULE_PARM_DESC(ntsc
, "Set NTSC standard: M, J (Japan), K (South Korea)");
202 MODULE_PARM_DESC(tunertype
,
203 "Specify tuner type:\n"
204 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
205 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
206 "\t\t\t-1 = Autodetect (default)\n");
207 MODULE_PARM_DESC(debug
,
208 "Debug level (bitmask). Default: 0\n"
209 "\t\t\t 1/0x0001: warning\n"
210 "\t\t\t 2/0x0002: info\n"
211 "\t\t\t 4/0x0004: mailbox\n"
212 "\t\t\t 8/0x0008: ioctl\n"
213 "\t\t\t 16/0x0010: file\n"
214 "\t\t\t 32/0x0020: dma\n"
215 "\t\t\t 64/0x0040: irq\n"
216 "\t\t\t 128/0x0080: decoder\n"
217 "\t\t\t 256/0x0100: yuv\n"
218 "\t\t\t 512/0x0200: i2c\n"
219 "\t\t\t1024/0x0400: high volume\n");
220 MODULE_PARM_DESC(ivtv_pci_latency
,
221 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
222 "\t\t\tDefault: Yes");
223 MODULE_PARM_DESC(ivtv_yuv_mode
,
224 "Specify the yuv playback mode:\n"
225 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
226 "\t\t\tDefault: 0 (interlaced)");
227 MODULE_PARM_DESC(ivtv_yuv_threshold
,
228 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
229 "\t\t\tDefault: 480");
230 MODULE_PARM_DESC(enc_mpg_buffers
,
231 "Encoder MPG Buffers (in MB)\n"
232 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS
));
233 MODULE_PARM_DESC(enc_yuv_buffers
,
234 "Encoder YUV Buffers (in MB)\n"
235 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS
));
236 MODULE_PARM_DESC(enc_vbi_buffers
,
237 "Encoder VBI Buffers (in MB)\n"
238 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS
));
239 MODULE_PARM_DESC(enc_pcm_buffers
,
240 "Encoder PCM buffers (in kB)\n"
241 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS
));
242 MODULE_PARM_DESC(dec_mpg_buffers
,
243 "Decoder MPG buffers (in MB)\n"
244 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS
));
245 MODULE_PARM_DESC(dec_yuv_buffers
,
246 "Decoder YUV buffers (in MB)\n"
247 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS
));
248 MODULE_PARM_DESC(dec_vbi_buffers
,
249 "Decoder VBI buffers (in kB)\n"
250 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS
));
251 MODULE_PARM_DESC(newi2c
,
252 "Use new I2C implementation\n"
253 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
254 "\t\t\tDefault is autodetect");
255 MODULE_PARM_DESC(i2c_clock_period
,
256 "Period of SCL for the I2C bus controlled by the CX23415/6\n"
257 "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
258 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD
));
260 MODULE_PARM_DESC(ivtv_first_minor
, "Set device node number assigned to first card");
262 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
263 MODULE_DESCRIPTION("CX23415/CX23416 driver");
264 MODULE_SUPPORTED_DEVICE
265 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
266 "\t\t\tYuan MPG series and similar)");
267 MODULE_LICENSE("GPL");
269 MODULE_VERSION(IVTV_VERSION
);
271 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
)
273 itv
->irqmask
&= ~mask
;
274 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
277 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
)
279 itv
->irqmask
|= mask
;
280 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
283 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
)
287 spin_lock(&itv
->lock
);
288 old_mode
= itv
->output_mode
;
290 itv
->output_mode
= old_mode
= mode
;
291 spin_unlock(&itv
->lock
);
295 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
)
297 switch (itv
->output_mode
) {
299 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_MPG
];
301 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
307 int ivtv_waitq(wait_queue_head_t
*waitq
)
311 prepare_to_wait(waitq
, &wait
, TASK_INTERRUPTIBLE
);
313 finish_wait(waitq
, &wait
);
314 return signal_pending(current
) ? -EINTR
: 0;
317 /* Generic utility functions */
318 int ivtv_msleep_timeout(unsigned int msecs
, int intr
)
320 int timeout
= msecs_to_jiffies(msecs
);
323 set_current_state(intr
? TASK_INTERRUPTIBLE
: TASK_UNINTERRUPTIBLE
);
324 timeout
= schedule_timeout(timeout
);
326 int ret
= signal_pending(current
);
335 /* Release ioremapped memory */
336 static void ivtv_iounmap(struct ivtv
*itv
)
341 /* Release registers memory */
342 if (itv
->reg_mem
!= NULL
) {
343 IVTV_DEBUG_INFO("releasing reg_mem\n");
344 iounmap(itv
->reg_mem
);
347 /* Release io memory */
348 if (itv
->has_cx23415
&& itv
->dec_mem
!= NULL
) {
349 IVTV_DEBUG_INFO("releasing dec_mem\n");
350 iounmap(itv
->dec_mem
);
354 /* Release io memory */
355 if (itv
->enc_mem
!= NULL
) {
356 IVTV_DEBUG_INFO("releasing enc_mem\n");
357 iounmap(itv
->enc_mem
);
362 /* Hauppauge card? get values from tveeprom */
363 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
)
367 itv
->i2c_client
.addr
= 0xA0 >> 1;
368 tveeprom_read(&itv
->i2c_client
, eedata
, sizeof(eedata
));
369 tveeprom_hauppauge_analog(&itv
->i2c_client
, tv
, eedata
);
372 static void ivtv_process_eeprom(struct ivtv
*itv
)
375 int pci_slot
= PCI_SLOT(itv
->pdev
->devfn
);
377 ivtv_read_eeprom(itv
, &tv
);
379 /* Many thanks to Steven Toth from Hauppauge for providing the
382 /* In a few cases the PCI subsystem IDs do not correctly
383 identify the card. A better method is to check the
384 model number from the eeprom instead. */
385 case 30012 ... 30039: /* Low profile PVR250 */
386 case 32000 ... 32999:
387 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
388 case 48400 ... 48599:
389 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_250
);
391 case 48100 ... 48399:
392 case 48600 ... 48999:
393 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350
);
395 case 23000 ... 23999: /* PVR500 */
396 case 25000 ... 25999: /* Low profile PVR150 */
397 case 26000 ... 26999: /* Regular PVR150 */
398 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
401 IVTV_ERR("Invalid EEPROM\n");
404 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv
.model
);
405 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
410 /* Old style PVR350 (with an saa7114) uses this input for
413 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350_V1
);
419 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
420 itv
->card_name
= itv
->card
->name
;
421 itv
->card_i2c
= itv
->card
->i2c
;
423 /* If this is a PVR500 then it should be possible to detect whether it is the
424 first or second unit by looking at the subsystem device ID: is bit 4 is
425 set, then it is the second unit (according to info from Hauppauge).
427 However, while this works for most cards, I have seen a few PVR500 cards
428 where both units have the same subsystem ID.
430 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
431 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
432 it is the second unit. It is possible that it is a different slot when ivtv is
433 used in Xen, in that case I ignore this card here. The worst that can happen
434 is that the card presents itself with a non-working radio device.
436 This detection is needed since the eeprom reports incorrectly that a radio is
437 present on the second unit. */
438 if (tv
.model
/ 1000 == 23) {
439 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio
= {
440 .radio
= { 0x60, I2C_CLIENT_END
},
441 .demod
= { 0x43, I2C_CLIENT_END
},
442 .tv
= { 0x61, I2C_CLIENT_END
},
445 itv
->card_name
= "WinTV PVR 500";
446 itv
->card_i2c
= &ivtv_i2c_radio
;
447 if (pci_slot
== 8 || pci_slot
== 9) {
448 int is_first
= (pci_slot
& 1) == 0;
450 itv
->card_name
= is_first
? "WinTV PVR 500 (unit #1)" :
451 "WinTV PVR 500 (unit #2)";
453 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
458 IVTV_INFO("Autodetected %s\n", itv
->card_name
);
460 switch (tv
.tuner_hauppauge_model
) {
464 itv
->pvr150_workaround
= 1;
469 if (tv
.tuner_type
== TUNER_ABSENT
)
470 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
472 if (itv
->options
.tuner
== -1)
473 itv
->options
.tuner
= tv
.tuner_type
;
474 if (itv
->options
.radio
== -1)
475 itv
->options
.radio
= (tv
.has_radio
!= 0);
476 /* only enable newi2c if an IR blaster is present */
477 if (itv
->options
.newi2c
== -1 && tv
.has_ir
) {
478 itv
->options
.newi2c
= (tv
.has_ir
& 4) ? 1 : 0;
479 if (itv
->options
.newi2c
) {
480 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
487 /* user specified tuner standard */
490 /* autodetect tuner standard */
491 if (tv
.tuner_formats
& V4L2_STD_PAL
) {
492 IVTV_DEBUG_INFO("PAL tuner detected\n");
493 itv
->std
|= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
494 } else if (tv
.tuner_formats
& V4L2_STD_NTSC
) {
495 IVTV_DEBUG_INFO("NTSC tuner detected\n");
496 itv
->std
|= V4L2_STD_NTSC_M
;
497 } else if (tv
.tuner_formats
& V4L2_STD_SECAM
) {
498 IVTV_DEBUG_INFO("SECAM tuner detected\n");
499 itv
->std
|= V4L2_STD_SECAM_L
;
501 IVTV_INFO("No tuner detected, default to NTSC-M\n");
502 itv
->std
|= V4L2_STD_NTSC_M
;
506 static v4l2_std_id
ivtv_parse_std(struct ivtv
*itv
)
511 return V4L2_STD_PAL_60
;
519 return V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
523 if (pal
[1] == 'c' || pal
[1] == 'C')
524 return V4L2_STD_PAL_Nc
;
525 return V4L2_STD_PAL_N
;
529 return V4L2_STD_PAL_I
;
535 return V4L2_STD_PAL_DK
;
539 return V4L2_STD_PAL_M
;
543 IVTV_WARN("pal= argument not recognised\n");
555 return V4L2_STD_SECAM_B
| V4L2_STD_SECAM_G
| V4L2_STD_SECAM_H
;
561 return V4L2_STD_SECAM_DK
;
565 if (secam
[1] == 'C' || secam
[1] == 'c')
566 return V4L2_STD_SECAM_LC
;
567 return V4L2_STD_SECAM_L
;
571 IVTV_WARN("secam= argument not recognised\n");
579 return V4L2_STD_NTSC_M
;
583 return V4L2_STD_NTSC_M_JP
;
587 return V4L2_STD_NTSC_M_KR
;
591 IVTV_WARN("ntsc= argument not recognised\n");
599 static void ivtv_process_options(struct ivtv
*itv
)
601 const char *chipname
;
604 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_MPG
] = enc_mpg_buffers
* 1024;
605 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_YUV
] = enc_yuv_buffers
* 1024;
606 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_VBI
] = enc_vbi_buffers
* 1024;
607 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_PCM
] = enc_pcm_buffers
;
608 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_MPG
] = dec_mpg_buffers
* 1024;
609 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_YUV
] = dec_yuv_buffers
* 1024;
610 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_VBI
] = dec_vbi_buffers
;
611 itv
->options
.cardtype
= cardtype
[itv
->instance
];
612 itv
->options
.tuner
= tuner
[itv
->instance
];
613 itv
->options
.radio
= radio
[itv
->instance
];
615 itv
->options
.i2c_clock_period
= i2c_clock_period
[itv
->instance
];
616 if (itv
->options
.i2c_clock_period
== -1)
617 itv
->options
.i2c_clock_period
= IVTV_DEFAULT_I2C_CLOCK_PERIOD
;
618 else if (itv
->options
.i2c_clock_period
< 10)
619 itv
->options
.i2c_clock_period
= 10;
620 else if (itv
->options
.i2c_clock_period
> 4500)
621 itv
->options
.i2c_clock_period
= 4500;
623 itv
->options
.newi2c
= newi2c
;
624 if (tunertype
< -1 || tunertype
> 1) {
625 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
628 itv
->std
= ivtv_parse_std(itv
);
629 if (itv
->std
== 0 && tunertype
>= 0)
630 itv
->std
= tunertype
? V4L2_STD_MN
: (V4L2_STD_ALL
& ~V4L2_STD_MN
);
631 itv
->has_cx23415
= (itv
->pdev
->device
== PCI_DEVICE_ID_IVTV15
);
632 chipname
= itv
->has_cx23415
? "cx23415" : "cx23416";
633 if (itv
->options
.cardtype
== -1) {
634 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname
);
637 if ((itv
->card
= ivtv_get_card(itv
->options
.cardtype
- 1))) {
638 IVTV_INFO("User specified %s card (detected %s based chip)\n",
639 itv
->card
->name
, chipname
);
640 } else if (itv
->options
.cardtype
!= 0) {
641 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
643 if (itv
->card
== NULL
) {
644 if (itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE
||
645 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT1
||
646 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT2
) {
647 itv
->card
= ivtv_get_card(itv
->has_cx23415
? IVTV_CARD_PVR_350
: IVTV_CARD_PVR_150
);
648 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
652 if (itv
->card
== NULL
) {
653 for (i
= 0; (itv
->card
= ivtv_get_card(i
)); i
++) {
654 if (itv
->card
->pci_list
== NULL
)
656 for (j
= 0; itv
->card
->pci_list
[j
].device
; j
++) {
657 if (itv
->pdev
->device
!=
658 itv
->card
->pci_list
[j
].device
)
660 if (itv
->pdev
->subsystem_vendor
!=
661 itv
->card
->pci_list
[j
].subsystem_vendor
)
663 if (itv
->pdev
->subsystem_device
!=
664 itv
->card
->pci_list
[j
].subsystem_device
)
666 IVTV_INFO("Autodetected %s card (%s based)\n",
667 itv
->card
->name
, chipname
);
674 if (itv
->card
== NULL
) {
675 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
676 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
677 itv
->pdev
->vendor
, itv
->pdev
->device
);
678 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
679 itv
->pdev
->subsystem_vendor
, itv
->pdev
->subsystem_device
);
680 IVTV_ERR(" %s based\n", chipname
);
681 IVTV_ERR("Defaulting to %s card\n", itv
->card
->name
);
682 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
683 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
684 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
686 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
687 itv
->card_name
= itv
->card
->name
;
688 itv
->card_i2c
= itv
->card
->i2c
;
691 /* Precondition: the ivtv structure has been memset to 0. Only
692 the dev and num fields have been filled in.
693 No assumptions on the card type may be made here (see ivtv_init_struct2
696 static int __devinit
ivtv_init_struct1(struct ivtv
*itv
)
698 itv
->base_addr
= pci_resource_start(itv
->pdev
, 0);
699 itv
->enc_mbox
.max_mbox
= 2; /* the encoder has 3 mailboxes (0-2) */
700 itv
->dec_mbox
.max_mbox
= 1; /* the decoder has 2 mailboxes (0-1) */
702 mutex_init(&itv
->serialize_lock
);
703 mutex_init(&itv
->i2c_bus_lock
);
704 mutex_init(&itv
->udma
.lock
);
706 spin_lock_init(&itv
->lock
);
707 spin_lock_init(&itv
->dma_reg_lock
);
709 itv
->irq_work_queues
= create_singlethread_workqueue(itv
->v4l2_dev
.name
);
710 if (itv
->irq_work_queues
== NULL
) {
711 IVTV_ERR("Could not create ivtv workqueue\n");
715 INIT_WORK(&itv
->irq_work_queue
, ivtv_irq_work_handler
);
717 /* start counting open_id at 1 */
720 /* Initial settings */
721 cx2341x_fill_defaults(&itv
->params
);
722 itv
->params
.port
= CX2341X_PORT_MEMORY
;
723 itv
->params
.capabilities
= CX2341X_CAP_HAS_SLICED_VBI
;
724 init_waitqueue_head(&itv
->eos_waitq
);
725 init_waitqueue_head(&itv
->event_waitq
);
726 init_waitqueue_head(&itv
->vsync_waitq
);
727 init_waitqueue_head(&itv
->dma_waitq
);
728 init_timer(&itv
->dma_timer
);
729 itv
->dma_timer
.function
= ivtv_unfinished_dma
;
730 itv
->dma_timer
.data
= (unsigned long)itv
;
732 itv
->cur_dma_stream
= -1;
733 itv
->cur_pio_stream
= -1;
734 itv
->audio_stereo_mode
= AUDIO_STEREO
;
735 itv
->audio_bilingual_mode
= AUDIO_MONO_LEFT
;
741 itv
->vbi
.in
.type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
742 itv
->vbi
.sliced_in
= &itv
->vbi
.in
.fmt
.sliced
;
744 /* Init the sg table for osd/yuv output */
745 sg_init_table(itv
->udma
.SGlist
, IVTV_DMA_SG_OSD_ENT
);
748 itv
->osd_global_alpha_state
= 1;
749 itv
->osd_global_alpha
= 255;
752 atomic_set(&itv
->yuv_info
.next_dma_frame
, -1);
753 itv
->yuv_info
.lace_mode
= ivtv_yuv_mode
;
754 itv
->yuv_info
.lace_threshold
= ivtv_yuv_threshold
;
755 itv
->yuv_info
.max_frames_buffered
= 3;
756 itv
->yuv_info
.track_osd
= 1;
760 /* Second initialization part. Here the card type has been
762 static void __devinit
ivtv_init_struct2(struct ivtv
*itv
)
766 for (i
= 0; i
< IVTV_CARD_MAX_VIDEO_INPUTS
; i
++)
767 if (itv
->card
->video_inputs
[i
].video_type
== 0)
770 for (i
= 0; i
< IVTV_CARD_MAX_AUDIO_INPUTS
; i
++)
771 if (itv
->card
->audio_inputs
[i
].audio_type
== 0)
773 itv
->nof_audio_inputs
= i
;
775 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
776 itv
->vbi
.sliced_size
= 288; /* multiple of 16, real size = 284 */
778 itv
->vbi
.sliced_size
= 64; /* multiple of 16, real size = 52 */
781 /* Find tuner input */
782 for (i
= 0; i
< itv
->nof_inputs
; i
++) {
783 if (itv
->card
->video_inputs
[i
].video_type
==
784 IVTV_CARD_INPUT_VID_TUNER
)
787 if (i
== itv
->nof_inputs
)
789 itv
->active_input
= i
;
790 itv
->audio_input
= itv
->card
->video_inputs
[i
].audio_index
;
793 static int ivtv_setup_pci(struct ivtv
*itv
, struct pci_dev
*pdev
,
794 const struct pci_device_id
*pci_id
)
798 unsigned char pci_latency
;
800 IVTV_DEBUG_INFO("Enabling pci device\n");
802 if (pci_enable_device(pdev
)) {
803 IVTV_ERR("Can't enable device!\n");
806 if (pci_set_dma_mask(pdev
, 0xffffffff)) {
807 IVTV_ERR("No suitable DMA available.\n");
810 if (!request_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
, "ivtv encoder")) {
811 IVTV_ERR("Cannot request encoder memory region.\n");
815 if (!request_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
,
816 IVTV_REG_SIZE
, "ivtv registers")) {
817 IVTV_ERR("Cannot request register memory region.\n");
818 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
822 if (itv
->has_cx23415
&&
823 !request_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
824 IVTV_DECODER_SIZE
, "ivtv decoder")) {
825 IVTV_ERR("Cannot request decoder memory region.\n");
826 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
827 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
831 /* Check for bus mastering */
832 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
833 if (!(cmd
& PCI_COMMAND_MASTER
)) {
834 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
835 pci_set_master(pdev
);
836 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
837 if (!(cmd
& PCI_COMMAND_MASTER
)) {
838 IVTV_ERR("Bus Mastering is not enabled\n");
842 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
844 pci_read_config_byte(pdev
, PCI_CLASS_REVISION
, &card_rev
);
845 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
847 if (pci_latency
< 64 && ivtv_pci_latency
) {
848 IVTV_INFO("Unreasonably low latency timer, "
849 "setting to 64 (was %d)\n", pci_latency
);
850 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
851 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
853 /* This config space value relates to DMA latencies. The
854 default value 0x8080 is too low however and will lead
855 to DMA errors. 0xffff is the max value which solves
857 pci_write_config_dword(pdev
, 0x40, 0xffff);
859 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
860 "irq: %d, latency: %d, memory: 0x%lx\n",
861 pdev
->device
, card_rev
, pdev
->bus
->number
,
862 PCI_SLOT(pdev
->devfn
), PCI_FUNC(pdev
->devfn
),
863 pdev
->irq
, pci_latency
, (unsigned long)itv
->base_addr
);
868 static void ivtv_load_and_init_modules(struct ivtv
*itv
)
870 u32 hw
= itv
->card
->hw_all
;
873 /* check which i2c devices are actually found */
874 for (i
= 0; i
< 32; i
++) {
879 if (device
== IVTV_HW_GPIO
|| device
== IVTV_HW_TVEEPROM
) {
880 /* GPIO and TVEEPROM do not use i2c probing */
881 itv
->hw_flags
|= device
;
884 if (ivtv_i2c_register(itv
, i
) == 0)
885 itv
->hw_flags
|= device
;
888 /* probe for legacy IR controllers that aren't in card definitions */
889 if ((itv
->hw_flags
& IVTV_HW_IR_ANY
) == 0)
890 ivtv_i2c_new_ir_legacy(itv
);
892 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
893 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_CX25840
);
894 else if (itv
->card
->hw_all
& IVTV_HW_SAA717X
)
895 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA717X
);
896 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
897 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7114
);
899 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7115
);
900 itv
->sd_audio
= ivtv_find_hw(itv
, itv
->card
->hw_audio_ctrl
);
901 itv
->sd_muxer
= ivtv_find_hw(itv
, itv
->card
->hw_muxer
);
905 if (itv
->card
->type
== IVTV_CARD_CX23416GYC
) {
906 /* Several variations of this card exist, detect which card
907 type should be used. */
908 if ((hw
& (IVTV_HW_UPD64031A
| IVTV_HW_UPD6408X
)) == 0)
909 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS
);
910 else if ((hw
& IVTV_HW_UPD64031A
) == 0)
911 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR
);
913 else if (itv
->card
->type
== IVTV_CARD_GV_MVPRX
||
914 itv
->card
->type
== IVTV_CARD_GV_MVPRX2E
) {
915 /* The crystal frequency of GVMVPRX is 24.576MHz */
916 v4l2_subdev_call(itv
->sd_video
, video
, s_crystal_freq
,
917 SAA7115_FREQ_24_576_MHZ
, SAA7115_FREQ_FL_UCGC
);
920 if (hw
& IVTV_HW_CX25840
) {
921 itv
->vbi
.raw_decoder_line_size
= 1444;
922 itv
->vbi
.raw_decoder_sav_odd_field
= 0x20;
923 itv
->vbi
.raw_decoder_sav_even_field
= 0x60;
924 itv
->vbi
.sliced_decoder_line_size
= 272;
925 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xB0;
926 itv
->vbi
.sliced_decoder_sav_even_field
= 0xF0;
929 if (hw
& IVTV_HW_SAA711X
) {
930 struct v4l2_dbg_chip_ident v
;
932 /* determine the exact saa711x model */
933 itv
->hw_flags
&= ~IVTV_HW_SAA711X
;
935 v
.match
.type
= V4L2_CHIP_MATCH_I2C_DRIVER
;
936 strlcpy(v
.match
.name
, "saa7115", sizeof(v
.match
.name
));
937 ivtv_call_hw(itv
, IVTV_HW_SAA711X
, core
, g_chip_ident
, &v
);
938 if (v
.ident
== V4L2_IDENT_SAA7114
) {
939 itv
->hw_flags
|= IVTV_HW_SAA7114
;
940 /* VBI is not yet supported by the saa7114 driver. */
941 itv
->v4l2_cap
&= ~(V4L2_CAP_SLICED_VBI_CAPTURE
|V4L2_CAP_VBI_CAPTURE
);
943 itv
->hw_flags
|= IVTV_HW_SAA7115
;
945 itv
->vbi
.raw_decoder_line_size
= 1443;
946 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
947 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
948 itv
->vbi
.sliced_decoder_line_size
= 51;
949 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
950 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
953 if (hw
& IVTV_HW_SAA717X
) {
954 itv
->vbi
.raw_decoder_line_size
= 1443;
955 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
956 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
957 itv
->vbi
.sliced_decoder_line_size
= 51;
958 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
959 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
963 static int __devinit
ivtv_probe(struct pci_dev
*pdev
,
964 const struct pci_device_id
*pci_id
)
970 itv
= kzalloc(sizeof(struct ivtv
), GFP_ATOMIC
);
974 itv
->instance
= v4l2_device_set_name(&itv
->v4l2_dev
, "ivtv",
977 retval
= v4l2_device_register(&pdev
->dev
, &itv
->v4l2_dev
);
982 IVTV_INFO("Initializing card %d\n", itv
->instance
);
984 ivtv_process_options(itv
);
985 if (itv
->options
.cardtype
== -1) {
989 if (ivtv_init_struct1(itv
)) {
994 IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv
->base_addr
);
996 /* PCI Device Setup */
997 retval
= ivtv_setup_pci(itv
, pdev
, pci_id
);
1000 if (retval
== -ENXIO
)
1004 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1005 itv
->base_addr
+ IVTV_ENCODER_OFFSET
, IVTV_ENCODER_SIZE
);
1006 itv
->enc_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_ENCODER_OFFSET
,
1008 if (!itv
->enc_mem
) {
1009 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
1010 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1015 if (itv
->has_cx23415
) {
1016 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1017 itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1018 itv
->dec_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
1020 if (!itv
->dec_mem
) {
1021 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
1022 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1028 itv
->dec_mem
= itv
->enc_mem
;
1031 /* map registers memory */
1032 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1033 itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1035 ioremap_nocache(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1036 if (!itv
->reg_mem
) {
1037 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
1038 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1043 retval
= ivtv_gpio_init(itv
);
1048 IVTV_DEBUG_INFO("activating i2c...\n");
1049 if (init_ivtv_i2c(itv
)) {
1050 IVTV_ERR("Could not initialize i2c\n");
1054 if (itv
->card
->hw_all
& IVTV_HW_TVEEPROM
) {
1055 /* Based on the model number the cardtype may be changed.
1056 The PCI IDs are not always reliable. */
1057 ivtv_process_eeprom(itv
);
1059 if (itv
->card
->comment
)
1060 IVTV_INFO("%s", itv
->card
->comment
);
1061 if (itv
->card
->v4l2_capabilities
== 0) {
1062 /* card was detected but is not supported */
1067 if (itv
->std
== 0) {
1068 itv
->std
= V4L2_STD_NTSC_M
;
1071 if (itv
->options
.tuner
== -1) {
1074 for (i
= 0; i
< IVTV_CARD_MAX_TUNERS
; i
++) {
1075 if ((itv
->std
& itv
->card
->tuners
[i
].std
) == 0)
1077 itv
->options
.tuner
= itv
->card
->tuners
[i
].tuner
;
1081 /* if no tuner was found, then pick the first tuner in the card list */
1082 if (itv
->options
.tuner
== -1 && itv
->card
->tuners
[0].std
) {
1083 itv
->std
= itv
->card
->tuners
[0].std
;
1084 if (itv
->std
& V4L2_STD_PAL
)
1085 itv
->std
= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
1086 else if (itv
->std
& V4L2_STD_NTSC
)
1087 itv
->std
= V4L2_STD_NTSC_M
;
1088 else if (itv
->std
& V4L2_STD_SECAM
)
1089 itv
->std
= V4L2_STD_SECAM_L
;
1090 itv
->options
.tuner
= itv
->card
->tuners
[0].tuner
;
1092 if (itv
->options
.radio
== -1)
1093 itv
->options
.radio
= (itv
->card
->radio_input
.audio_type
!= 0);
1095 /* The card is now fully identified, continue with card-specific
1097 ivtv_init_struct2(itv
);
1099 ivtv_load_and_init_modules(itv
);
1101 if (itv
->std
& V4L2_STD_525_60
) {
1103 itv
->is_out_60hz
= 1;
1106 itv
->is_out_50hz
= 1;
1109 itv
->yuv_info
.osd_full_w
= 720;
1110 itv
->yuv_info
.osd_full_h
= itv
->is_out_50hz
? 576 : 480;
1111 itv
->yuv_info
.v4l2_src_w
= itv
->yuv_info
.osd_full_w
;
1112 itv
->yuv_info
.v4l2_src_h
= itv
->yuv_info
.osd_full_h
;
1114 itv
->params
.video_gop_size
= itv
->is_60hz
? 15 : 12;
1116 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_MPG
] = 0x08000;
1117 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_PCM
] = 0x01200;
1118 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_MPG
] = 0x10000;
1119 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_YUV
] = 0x10000;
1120 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_YUV
] = 0x08000;
1122 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1123 It is possible to switch between PAL and NTSC, so we need to
1124 take the largest size here. */
1125 /* 1456 is multiple of 16, real size = 1444 */
1126 itv
->vbi
.raw_size
= 1456;
1127 /* We use a buffer size of 1/2 of the total size needed for a
1128 frame. This is actually very useful, since we now receive
1129 a field at a time and that makes 'compressing' the raw data
1130 down to size by stripping off the SAV codes a lot easier.
1131 Note: having two different buffer sizes prevents standard
1132 switching on the fly. We need to find a better solution... */
1133 vbi_buf_size
= itv
->vbi
.raw_size
* (itv
->is_60hz
? 24 : 36) / 2;
1134 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_VBI
] = vbi_buf_size
;
1135 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_VBI
] = sizeof(struct v4l2_sliced_vbi_data
) * 36;
1137 if (itv
->options
.radio
> 0)
1138 itv
->v4l2_cap
|= V4L2_CAP_RADIO
;
1140 if (itv
->options
.tuner
> -1) {
1141 struct tuner_setup setup
;
1143 setup
.addr
= ADDR_UNSET
;
1144 setup
.type
= itv
->options
.tuner
;
1145 setup
.mode_mask
= T_ANALOG_TV
; /* matches TV tuners */
1146 setup
.tuner_callback
= (setup
.type
== TUNER_XC2028
) ?
1147 ivtv_reset_tuner_gpio
: NULL
;
1148 ivtv_call_all(itv
, tuner
, s_type_addr
, &setup
);
1149 if (setup
.type
== TUNER_XC2028
) {
1150 static struct xc2028_ctrl ctrl
= {
1151 .fname
= XC2028_DEFAULT_FIRMWARE
,
1154 struct v4l2_priv_tun_config cfg
= {
1155 .tuner
= itv
->options
.tuner
,
1158 ivtv_call_all(itv
, tuner
, s_config
, &cfg
);
1162 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1164 itv
->tuner_std
= itv
->std
;
1166 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1167 ivtv_call_all(itv
, video
, s_std_output
, itv
->std
);
1168 /* Turn off the output signal. The mpeg decoder is not yet
1169 active so without this you would get a green image until the
1170 mpeg decoder becomes active. */
1171 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1174 /* clear interrupt mask, effectively disabling interrupts */
1175 ivtv_set_irq_mask(itv
, 0xffffffff);
1178 retval
= request_irq(itv
->pdev
->irq
, ivtv_irq_handler
,
1179 IRQF_SHARED
| IRQF_DISABLED
, itv
->v4l2_dev
.name
, (void *)itv
);
1181 IVTV_ERR("Failed to register irq %d\n", retval
);
1185 retval
= ivtv_streams_setup(itv
);
1187 IVTV_ERR("Error %d setting up streams\n", retval
);
1190 retval
= ivtv_streams_register(itv
);
1192 IVTV_ERR("Error %d registering devices\n", retval
);
1195 IVTV_INFO("Initialized card: %s\n", itv
->card_name
);
1199 ivtv_streams_cleanup(itv
, 1);
1201 free_irq(itv
->pdev
->irq
, (void *)itv
);
1207 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1208 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1209 if (itv
->has_cx23415
)
1210 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1212 destroy_workqueue(itv
->irq_work_queues
);
1216 IVTV_ERR("Error %d on initialization\n", retval
);
1218 v4l2_device_unregister(&itv
->v4l2_dev
);
1223 int ivtv_init_on_first_open(struct ivtv
*itv
)
1225 struct v4l2_frequency vf
;
1226 /* Needed to call ioctls later */
1227 struct ivtv_open_id fh
;
1228 int fw_retry_count
= 3;
1233 if (test_bit(IVTV_F_I_FAILED
, &itv
->i_flags
))
1236 if (test_and_set_bit(IVTV_F_I_INITED
, &itv
->i_flags
))
1239 while (--fw_retry_count
> 0) {
1241 if (ivtv_firmware_init(itv
) == 0)
1243 if (fw_retry_count
> 1)
1244 IVTV_WARN("Retry loading firmware\n");
1247 if (fw_retry_count
== 0) {
1248 set_bit(IVTV_F_I_FAILED
, &itv
->i_flags
);
1252 /* Try and get firmware versions */
1253 IVTV_DEBUG_INFO("Getting firmware version..\n");
1254 ivtv_firmware_versions(itv
);
1256 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
1257 struct v4l2_control ctrl
;
1259 v4l2_subdev_call(itv
->sd_video
, core
, load_fw
);
1260 /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
1261 ctrl
.id
= V4L2_CID_PRIVATE_BASE
;
1262 ctrl
.value
= itv
->pvr150_workaround
;
1263 v4l2_subdev_call(itv
->sd_video
, core
, s_ctrl
, &ctrl
);
1267 vf
.type
= V4L2_TUNER_ANALOG_TV
;
1268 vf
.frequency
= 6400; /* the tuner 'baseline' frequency */
1270 /* Set initial frequency. For PAL/SECAM broadcasts no
1271 'default' channel exists AFAIK. */
1272 if (itv
->std
== V4L2_STD_NTSC_M_JP
) {
1273 vf
.frequency
= 1460; /* ch. 1 91250*16/1000 */
1275 else if (itv
->std
& V4L2_STD_NTSC_M
) {
1276 vf
.frequency
= 1076; /* ch. 4 67250*16/1000 */
1279 video_input
= itv
->active_input
;
1280 itv
->active_input
++; /* Force update of input */
1281 ivtv_s_input(NULL
, &fh
, video_input
);
1283 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1285 itv
->std
++; /* Force full standard initialization */
1286 itv
->std_out
= itv
->std
;
1287 ivtv_s_frequency(NULL
, &fh
, &vf
);
1289 if (itv
->card
->v4l2_capabilities
& V4L2_CAP_VIDEO_OUTPUT
) {
1290 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1291 the mpeg decoder so now the saa7127 receives a proper
1293 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 1);
1294 ivtv_init_mpeg_decoder(itv
);
1296 ivtv_s_std(NULL
, &fh
, &itv
->tuner_std
);
1298 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1299 if (!itv
->has_cx23415
)
1300 write_reg_sync(0x03, IVTV_REG_DMACONTROL
);
1302 /* Default interrupts enabled. For the PVR350 this includes the
1303 decoder VSYNC interrupt, which is always on. It is not only used
1304 during decoding but also by the OSD.
1305 Some old PVR250 cards had a cx23415, so testing for that is too
1306 general. Instead test if the card has video output capability. */
1307 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1308 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
| IVTV_IRQ_DEC_VSYNC
);
1309 ivtv_set_osd_alpha(itv
);
1312 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
);
1316 static void ivtv_remove(struct pci_dev
*pdev
)
1318 struct v4l2_device
*v4l2_dev
= dev_get_drvdata(&pdev
->dev
);
1319 struct ivtv
*itv
= to_ivtv(v4l2_dev
);
1322 IVTV_DEBUG_INFO("Removing card\n");
1324 if (test_bit(IVTV_F_I_INITED
, &itv
->i_flags
)) {
1325 /* Stop all captures */
1326 IVTV_DEBUG_INFO("Stopping all streams\n");
1327 if (atomic_read(&itv
->capturing
) > 0)
1328 ivtv_stop_all_captures(itv
);
1330 /* Stop all decoding */
1331 IVTV_DEBUG_INFO("Stopping decoding\n");
1333 /* Turn off the TV-out */
1334 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
)
1335 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1336 if (atomic_read(&itv
->decoding
) > 0) {
1339 if (test_bit(IVTV_F_I_DEC_YUV
, &itv
->i_flags
))
1340 type
= IVTV_DEC_STREAM_TYPE_YUV
;
1342 type
= IVTV_DEC_STREAM_TYPE_MPG
;
1343 ivtv_stop_v4l2_decode_stream(&itv
->streams
[type
],
1344 VIDEO_CMD_STOP_TO_BLACK
| VIDEO_CMD_STOP_IMMEDIATELY
, 0);
1346 ivtv_halt_firmware(itv
);
1350 ivtv_set_irq_mask(itv
, 0xffffffff);
1351 del_timer_sync(&itv
->dma_timer
);
1353 /* Stop all Work Queues */
1354 flush_workqueue(itv
->irq_work_queues
);
1355 destroy_workqueue(itv
->irq_work_queues
);
1357 ivtv_streams_cleanup(itv
, 1);
1358 ivtv_udma_free(itv
);
1362 free_irq(itv
->pdev
->irq
, (void *)itv
);
1365 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1366 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1367 if (itv
->has_cx23415
)
1368 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1370 pci_disable_device(itv
->pdev
);
1371 for (i
= 0; i
< IVTV_VBI_FRAMES
; i
++)
1372 kfree(itv
->vbi
.sliced_mpeg_data
[i
]);
1374 printk(KERN_INFO
"ivtv: Removed %s\n", itv
->card_name
);
1376 v4l2_device_unregister(&itv
->v4l2_dev
);
1380 /* define a pci_driver for card detection */
1381 static struct pci_driver ivtv_pci_driver
= {
1383 .id_table
= ivtv_pci_tbl
,
1384 .probe
= ivtv_probe
,
1385 .remove
= ivtv_remove
,
1388 static int __init
module_start(void)
1390 printk(KERN_INFO
"ivtv: Start initialization, version %s\n", IVTV_VERSION
);
1392 /* Validate parameters */
1393 if (ivtv_first_minor
< 0 || ivtv_first_minor
>= IVTV_MAX_CARDS
) {
1394 printk(KERN_ERR
"ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
1395 IVTV_MAX_CARDS
- 1);
1399 if (ivtv_debug
< 0 || ivtv_debug
> 2047) {
1401 printk(KERN_INFO
"ivtv: Debug value must be >= 0 and <= 2047\n");
1404 if (pci_register_driver(&ivtv_pci_driver
)) {
1405 printk(KERN_ERR
"ivtv: Error detecting PCI card\n");
1408 printk(KERN_INFO
"ivtv: End initialization\n");
1412 static void __exit
module_cleanup(void)
1414 pci_unregister_driver(&ivtv_pci_driver
);
1417 /* Note: These symbols are exported because they are used by the ivtvfb
1418 framebuffer module and an infrared module for the IR-blaster. */
1419 EXPORT_SYMBOL(ivtv_set_irq_mask
);
1420 EXPORT_SYMBOL(ivtv_api
);
1421 EXPORT_SYMBOL(ivtv_vapi
);
1422 EXPORT_SYMBOL(ivtv_vapi_result
);
1423 EXPORT_SYMBOL(ivtv_clear_irq_mask
);
1424 EXPORT_SYMBOL(ivtv_debug
);
1425 EXPORT_SYMBOL(ivtv_reset_ir_gpio
);
1426 EXPORT_SYMBOL(ivtv_udma_setup
);
1427 EXPORT_SYMBOL(ivtv_udma_unmap
);
1428 EXPORT_SYMBOL(ivtv_udma_alloc
);
1429 EXPORT_SYMBOL(ivtv_udma_prepare
);
1430 EXPORT_SYMBOL(ivtv_init_on_first_open
);
1432 module_init(module_start
);
1433 module_exit(module_cleanup
);