Staging: strip: delete the driver

[linux/fpc-iii.git] / drivers / net / ax88796.c

/* drivers/net/ax88796.c
 *
 * Copyright 2005,2007 Simtec Electronics
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * Asix AX88796 10/100 Ethernet controller support
 *      Based on ne.c, by Donald Becker, et-al.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/isapnp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/eeprom_93cx6.h>
#include <linux/slab.h>

#include <net/ax88796.h>

#include <asm/system.h>
#include <asm/io.h>

static int phy_debug = 0;

/* Rename the lib8390.c functions to show that they are in this driver */
#define __ei_open       ax_ei_open
#define __ei_close      ax_ei_close
#define __ei_poll       ax_ei_poll
#define __ei_start_xmit ax_ei_start_xmit
#define __ei_tx_timeout ax_ei_tx_timeout
#define __ei_get_stats  ax_ei_get_stats
#define __ei_set_multicast_list ax_ei_set_multicast_list
#define __ei_interrupt  ax_ei_interrupt
#define ____alloc_ei_netdev ax__alloc_ei_netdev
#define __NS8390_init   ax_NS8390_init

/* force unsigned long back to 'void __iomem *' */
#define ax_convert_addr(_a) ((void __force __iomem *)(_a))

#define ei_inb(_a)      readb(ax_convert_addr(_a))
#define ei_outb(_v, _a) writeb(_v, ax_convert_addr(_a))

#define ei_inb_p(_a)    ei_inb(_a)
#define ei_outb_p(_v, _a) ei_outb(_v, _a)

/* define EI_SHIFT() to take into account our register offsets */
#define EI_SHIFT(x)     (ei_local->reg_offset[(x)])

/* Ensure we have our RCR base value */
#define AX88796_PLATFORM

static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electronics\n";

#include "lib8390.c"

#define DRV_NAME "ax88796"
#define DRV_VERSION "1.00"

/* from ne.c */
#define NE_CMD          EI_SHIFT(0x00)
#define NE_RESET        EI_SHIFT(0x1f)
#define NE_DATAPORT     EI_SHIFT(0x10)

#define NE1SM_START_PG  0x20    /* First page of TX buffer */
#define NE1SM_STOP_PG   0x40    /* Last page +1 of RX ring */
#define NESM_START_PG   0x40    /* First page of TX buffer */
#define NESM_STOP_PG    0x80    /* Last page +1 of RX ring */

/* device private data */

struct ax_device {
        struct timer_list        mii_timer;
        spinlock_t               mii_lock;
        struct mii_if_info       mii;

        u32                      msg_enable;
        void __iomem            *map2;
        struct platform_device  *dev;
        struct resource         *mem;
        struct resource         *mem2;
        struct ax_plat_data     *plat;

        unsigned char            running;
        unsigned char            resume_open;
        unsigned int             irqflags;

        u32                      reg_offsets[0x20];
};

static inline struct ax_device *to_ax_dev(struct net_device *dev)
{
        struct ei_device *ei_local = netdev_priv(dev);
        return (struct ax_device *)(ei_local+1);
}

/* ax_initial_check
 *
 * do an initial probe for the card to check wether it exists
 * and is functional
 */

static int ax_initial_check(struct net_device *dev)
{
        struct ei_device *ei_local = netdev_priv(dev);
        void __iomem *ioaddr = ei_local->mem;
        int reg0;
        int regd;

        reg0 = ei_inb(ioaddr);
        if (reg0 == 0xFF)
                return -ENODEV;

        ei_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
        regd = ei_inb(ioaddr + 0x0d);
        ei_outb(0xff, ioaddr + 0x0d);
        ei_outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
        ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
        if (ei_inb(ioaddr + EN0_COUNTER0) != 0) {
                ei_outb(reg0, ioaddr);
                ei_outb(regd, ioaddr + 0x0d);   /* Restore the old values. */
                return -ENODEV;
        }

        return 0;
}

/* Hard reset the card.  This used to pause for the same period that a
   8390 reset command required, but that shouldn't be necessary. */

static void ax_reset_8390(struct net_device *dev)
{
        struct ei_device *ei_local = netdev_priv(dev);
        struct ax_device  *ax = to_ax_dev(dev);
        unsigned long reset_start_time = jiffies;
        void __iomem *addr = (void __iomem *)dev->base_addr;

        if (ei_debug > 1)
                dev_dbg(&ax->dev->dev, "resetting the 8390 t=%ld\n", jiffies);

        ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);

        ei_status.txing = 0;
        ei_status.dmaing = 0;

        /* This check _should_not_ be necessary, omit eventually. */
        while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
                if (jiffies - reset_start_time > 2*HZ/100) {
                        dev_warn(&ax->dev->dev, "%s: %s did not complete.\n",
                               __func__, dev->name);
                        break;
                }
        }

        ei_outb(ENISR_RESET, addr + EN0_ISR);   /* Ack intr. */
}


static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
                            int ring_page)
{
        struct ei_device *ei_local = netdev_priv(dev);
        struct ax_device  *ax = to_ax_dev(dev);
        void __iomem *nic_base = ei_local->mem;

        /* This *shouldn't* happen. If it does, it's the last thing you'll see */
        if (ei_status.dmaing) {
                dev_err(&ax->dev->dev, "%s: DMAing conflict in %s "
                        "[DMAstat:%d][irqlock:%d].\n",
                        dev->name, __func__,
                        ei_status.dmaing, ei_status.irqlock);
                return;
        }

        ei_status.dmaing |= 0x01;
        ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
        ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
        ei_outb(0, nic_base + EN0_RCNTHI);
        ei_outb(0, nic_base + EN0_RSARLO);              /* On page boundary */
        ei_outb(ring_page, nic_base + EN0_RSARHI);
        ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);

        if (ei_status.word16)
                readsw(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
        else
                readsb(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));

        ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
        ei_status.dmaing &= ~0x01;

        le16_to_cpus(&hdr->count);
}


/* Block input and output, similar to the Crynwr packet driver.  If you
   are porting to a new ethercard, look at the packet driver source for hints.
   The NEx000 doesn't share the on-board packet memory -- you have to put
   the packet out through the "remote DMA" dataport using ei_outb. */

static void ax_block_input(struct net_device *dev, int count,
                           struct sk_buff *skb, int ring_offset)
{
        struct ei_device *ei_local = netdev_priv(dev);
        struct ax_device  *ax = to_ax_dev(dev);
        void __iomem *nic_base = ei_local->mem;
        char *buf = skb->data;

        if (ei_status.dmaing) {
                dev_err(&ax->dev->dev,
                        "%s: DMAing conflict in %s "
                        "[DMAstat:%d][irqlock:%d].\n",
                        dev->name, __func__,
                        ei_status.dmaing, ei_status.irqlock);
                return;
        }

        ei_status.dmaing |= 0x01;

        ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
        ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
        ei_outb(count >> 8, nic_base + EN0_RCNTHI);
        ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
        ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
        ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);

        if (ei_status.word16) {
                readsw(nic_base + NE_DATAPORT, buf, count >> 1);
                if (count & 0x01)
                        buf[count-1] = ei_inb(nic_base + NE_DATAPORT);

        } else {
                readsb(nic_base + NE_DATAPORT, buf, count);
        }

        ei_status.dmaing &= ~1;
}

static void ax_block_output(struct net_device *dev, int count,
                            const unsigned char *buf, const int start_page)
{
        struct ei_device *ei_local = netdev_priv(dev);
        struct ax_device  *ax = to_ax_dev(dev);
        void __iomem *nic_base = ei_local->mem;
        unsigned long dma_start;

        /* Round the count up for word writes.  Do we need to do this?
           What effect will an odd byte count have on the 8390?
           I should check someday. */

        if (ei_status.word16 && (count & 0x01))
                count++;

        /* This *shouldn't* happen. If it does, it's the last thing you'll see */
        if (ei_status.dmaing) {
                dev_err(&ax->dev->dev, "%s: DMAing conflict in %s."
                        "[DMAstat:%d][irqlock:%d]\n",
                        dev->name, __func__,
                       ei_status.dmaing, ei_status.irqlock);
                return;
        }

        ei_status.dmaing |= 0x01;
        /* We should already be in page 0, but to be safe... */
        ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);

        ei_outb(ENISR_RDC, nic_base + EN0_ISR);

        /* Now the normal output. */
        ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
        ei_outb(count >> 8,   nic_base + EN0_RCNTHI);
        ei_outb(0x00, nic_base + EN0_RSARLO);
        ei_outb(start_page, nic_base + EN0_RSARHI);

        ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
        if (ei_status.word16) {
                writesw(nic_base + NE_DATAPORT, buf, count>>1);
        } else {
                writesb(nic_base + NE_DATAPORT, buf, count);
        }

        dma_start = jiffies;

        while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
                if (jiffies - dma_start > 2*HZ/100) {           /* 20ms */
                        dev_warn(&ax->dev->dev,
                                 "%s: timeout waiting for Tx RDC.\n", dev->name);
                        ax_reset_8390(dev);
                        ax_NS8390_init(dev,1);
                        break;
                }
        }

        ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
        ei_status.dmaing &= ~0x01;
        return;
}

/* definitions for accessing MII/EEPROM interface */

#define AX_MEMR                 EI_SHIFT(0x14)
#define AX_MEMR_MDC             (1<<0)
#define AX_MEMR_MDIR            (1<<1)
#define AX_MEMR_MDI             (1<<2)
#define AX_MEMR_MDO             (1<<3)
#define AX_MEMR_EECS            (1<<4)
#define AX_MEMR_EEI             (1<<5)
#define AX_MEMR_EEO             (1<<6)
#define AX_MEMR_EECLK           (1<<7)

/* ax_mii_ei_outbits
 *
 * write the specified set of bits to the phy
*/

static void
ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
{
        struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
        void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
        unsigned int memr;

        /* clock low, data to output mode */
        memr = ei_inb(memr_addr);
        memr &= ~(AX_MEMR_MDC | AX_MEMR_MDIR);
        ei_outb(memr, memr_addr);

        for (len--; len >= 0; len--) {
                if (bits & (1 << len))
                        memr |= AX_MEMR_MDO;
                else
                        memr &= ~AX_MEMR_MDO;

                ei_outb(memr, memr_addr);

                /* clock high */

                ei_outb(memr | AX_MEMR_MDC, memr_addr);
                udelay(1);

                /* clock low */
                ei_outb(memr, memr_addr);
        }

        /* leaves the clock line low, mdir input */
        memr |= AX_MEMR_MDIR;
        ei_outb(memr, (void __iomem *)dev->base_addr + AX_MEMR);
}

/* ax_phy_ei_inbits
 *
 * read a specified number of bits from the phy
*/

static unsigned int
ax_phy_ei_inbits(struct net_device *dev, int no)
{
        struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
        void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
        unsigned int memr;
        unsigned int result = 0;

        /* clock low, data to input mode */
        memr = ei_inb(memr_addr);
        memr &= ~AX_MEMR_MDC;
        memr |= AX_MEMR_MDIR;
        ei_outb(memr, memr_addr);

        for (no--; no >= 0; no--) {
                ei_outb(memr | AX_MEMR_MDC, memr_addr);

                udelay(1);

                if (ei_inb(memr_addr) & AX_MEMR_MDI)
                        result |= (1<<no);

                ei_outb(memr, memr_addr);
        }

        return result;
}

/* ax_phy_issueaddr
 *
 * use the low level bit shifting routines to send the address
 * and command to the specified phy
*/

static void
ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
{
        if (phy_debug)
                pr_debug("%s: dev %p, %04x, %04x, %d\n",
                        __func__, dev, phy_addr, reg, opc);

        ax_mii_ei_outbits(dev, 0x3f, 6);        /* pre-amble */
        ax_mii_ei_outbits(dev, 1, 2);           /* frame-start */
        ax_mii_ei_outbits(dev, opc, 2);         /* op code */
        ax_mii_ei_outbits(dev, phy_addr, 5);    /* phy address */
        ax_mii_ei_outbits(dev, reg, 5);         /* reg address */
}

static int
ax_phy_read(struct net_device *dev, int phy_addr, int reg)
{
        struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
        unsigned long flags;
        unsigned int result;

        spin_lock_irqsave(&ei_local->page_lock, flags);

        ax_phy_issueaddr(dev, phy_addr, reg, 2);

        result = ax_phy_ei_inbits(dev, 17);
        result &= ~(3<<16);

        spin_unlock_irqrestore(&ei_local->page_lock, flags);

        if (phy_debug)
                pr_debug("%s: %04x.%04x => read %04x\n", __func__,
                         phy_addr, reg, result);

        return result;
}

static void
ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
{
        struct ei_device *ei = (struct ei_device *) netdev_priv(dev);
        struct ax_device  *ax = to_ax_dev(dev);
        unsigned long flags;

        dev_dbg(&ax->dev->dev, "%s: %p, %04x, %04x %04x\n",
                __func__, dev, phy_addr, reg, value);

        spin_lock_irqsave(&ei->page_lock, flags);

        ax_phy_issueaddr(dev, phy_addr, reg, 1);
        ax_mii_ei_outbits(dev, 2, 2);           /* send TA */
        ax_mii_ei_outbits(dev, value, 16);

        spin_unlock_irqrestore(&ei->page_lock, flags);
}

static void ax_mii_expiry(unsigned long data)
{
        struct net_device *dev = (struct net_device *)data;
        struct ax_device  *ax = to_ax_dev(dev);
        unsigned long flags;

        spin_lock_irqsave(&ax->mii_lock, flags);
        mii_check_media(&ax->mii, netif_msg_link(ax), 0);
        spin_unlock_irqrestore(&ax->mii_lock, flags);

        if (ax->running) {
                ax->mii_timer.expires = jiffies + HZ*2;
                add_timer(&ax->mii_timer);
        }
}

static int ax_open(struct net_device *dev)
{
        struct ax_device  *ax = to_ax_dev(dev);
        struct ei_device *ei_local = netdev_priv(dev);
        int ret;

        dev_dbg(&ax->dev->dev, "%s: open\n", dev->name);

        ret = request_irq(dev->irq, ax_ei_interrupt, ax->irqflags,
                          dev->name, dev);
        if (ret)
                return ret;

        ret = ax_ei_open(dev);
        if (ret)
                return ret;

        /* turn the phy on (if turned off) */

        ei_outb(ax->plat->gpoc_val, ei_local->mem + EI_SHIFT(0x17));
        ax->running = 1;

        /* start the MII timer */

        init_timer(&ax->mii_timer);

        ax->mii_timer.expires  = jiffies+1;
        ax->mii_timer.data     = (unsigned long) dev;
        ax->mii_timer.function = ax_mii_expiry;

        add_timer(&ax->mii_timer);

        return 0;
}

static int ax_close(struct net_device *dev)
{
        struct ax_device *ax = to_ax_dev(dev);
        struct ei_device *ei_local = netdev_priv(dev);

        dev_dbg(&ax->dev->dev, "%s: close\n", dev->name);

        /* turn the phy off */

        ei_outb(ax->plat->gpoc_val | (1<<6),
               ei_local->mem + EI_SHIFT(0x17));

        ax->running = 0;
        wmb();

        del_timer_sync(&ax->mii_timer);
        ax_ei_close(dev);

        free_irq(dev->irq, dev);
        return 0;
}

static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
{
        struct ax_device *ax = to_ax_dev(dev);
        unsigned long flags;
        int rc;

        if (!netif_running(dev))
                return -EINVAL;

        spin_lock_irqsave(&ax->mii_lock, flags);
        rc = generic_mii_ioctl(&ax->mii, if_mii(req), cmd, NULL);
        spin_unlock_irqrestore(&ax->mii_lock, flags);

        return rc;
}

/* ethtool ops */

static void ax_get_drvinfo(struct net_device *dev,
                           struct ethtool_drvinfo *info)
{
        struct ax_device *ax = to_ax_dev(dev);

        strcpy(info->driver, DRV_NAME);
        strcpy(info->version, DRV_VERSION);
        strcpy(info->bus_info, ax->dev->name);
}

static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
        struct ax_device *ax = to_ax_dev(dev);
        unsigned long flags;

        spin_lock_irqsave(&ax->mii_lock, flags);
        mii_ethtool_gset(&ax->mii, cmd);
        spin_unlock_irqrestore(&ax->mii_lock, flags);

        return 0;
}

static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
        struct ax_device *ax = to_ax_dev(dev);
        unsigned long flags;
        int rc;

        spin_lock_irqsave(&ax->mii_lock, flags);
        rc = mii_ethtool_sset(&ax->mii, cmd);
        spin_unlock_irqrestore(&ax->mii_lock, flags);

        return rc;
}

static int ax_nway_reset(struct net_device *dev)
{
        struct ax_device *ax = to_ax_dev(dev);
        return mii_nway_restart(&ax->mii);
}

static u32 ax_get_link(struct net_device *dev)
{
        struct ax_device *ax = to_ax_dev(dev);
        return mii_link_ok(&ax->mii);
}

static const struct ethtool_ops ax_ethtool_ops = {
        .get_drvinfo            = ax_get_drvinfo,
        .get_settings           = ax_get_settings,
        .set_settings           = ax_set_settings,
        .nway_reset             = ax_nway_reset,
        .get_link               = ax_get_link,
};

#ifdef CONFIG_AX88796_93CX6
static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom)
{
        struct ei_device *ei_local = eeprom->data;
        u8 reg = ei_inb(ei_local->mem + AX_MEMR);

        eeprom->reg_data_in = reg & AX_MEMR_EEI;
        eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */
        eeprom->reg_data_clock = reg & AX_MEMR_EECLK;
        eeprom->reg_chip_select = reg & AX_MEMR_EECS;
}

static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
{
        struct ei_device *ei_local = eeprom->data;
        u8 reg = ei_inb(ei_local->mem + AX_MEMR);

        reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS);

        if (eeprom->reg_data_in)
                reg |= AX_MEMR_EEI;
        if (eeprom->reg_data_clock)
                reg |= AX_MEMR_EECLK;
        if (eeprom->reg_chip_select)
                reg |= AX_MEMR_EECS;

        ei_outb(reg, ei_local->mem + AX_MEMR);
        udelay(10);
}
#endif

static const struct net_device_ops ax_netdev_ops = {
        .ndo_open               = ax_open,
        .ndo_stop               = ax_close,
        .ndo_do_ioctl           = ax_ioctl,

        .ndo_start_xmit         = ax_ei_start_xmit,
        .ndo_tx_timeout         = ax_ei_tx_timeout,
        .ndo_get_stats          = ax_ei_get_stats,
        .ndo_set_multicast_list = ax_ei_set_multicast_list,
        .ndo_validate_addr      = eth_validate_addr,
        .ndo_set_mac_address    = eth_mac_addr,
        .ndo_change_mtu         = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
        .ndo_poll_controller    = ax_ei_poll,
#endif
};

/* setup code */

static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
{
        void __iomem *ioaddr = ei_local->mem;
        struct ax_device *ax = to_ax_dev(dev);

        /* Select page 0*/
        ei_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, ioaddr + E8390_CMD);

        /* set to byte access */
        ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG);
        ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17));
}

/* ax_init_dev
 *
 * initialise the specified device, taking care to note the MAC
 * address it may already have (if configured), ensure
 * the device is ready to be used by lib8390.c and registerd with
 * the network layer.
 */

static int ax_init_dev(struct net_device *dev, int first_init)
{
        struct ei_device *ei_local = netdev_priv(dev);
        struct ax_device *ax = to_ax_dev(dev);
        void __iomem *ioaddr = ei_local->mem;
        unsigned int start_page;
        unsigned int stop_page;
        int ret;
        int i;

        ret = ax_initial_check(dev);
        if (ret)
                goto err_out;

        /* setup goes here */

        ax_initial_setup(dev, ei_local);

        /* read the mac from the card prom if we need it */

        if (first_init && ax->plat->flags & AXFLG_HAS_EEPROM) {
                unsigned char SA_prom[32];

                for(i = 0; i < sizeof(SA_prom); i+=2) {
                        SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT);
                        SA_prom[i+1] = ei_inb(ioaddr + NE_DATAPORT);
                }

                if (ax->plat->wordlength == 2)
                        for (i = 0; i < 16; i++)
                                SA_prom[i] = SA_prom[i+i];

                memcpy(dev->dev_addr,  SA_prom, 6);
        }

#ifdef CONFIG_AX88796_93CX6
        if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
                unsigned char mac_addr[6];
                struct eeprom_93cx6 eeprom;

                eeprom.data = ei_local;
                eeprom.register_read = ax_eeprom_register_read;
                eeprom.register_write = ax_eeprom_register_write;
                eeprom.width = PCI_EEPROM_WIDTH_93C56;

                eeprom_93cx6_multiread(&eeprom, 0,
                                       (__le16 __force *)mac_addr,
                                       sizeof(mac_addr) >> 1);

                memcpy(dev->dev_addr,  mac_addr, 6);
        }
#endif
        if (ax->plat->wordlength == 2) {
                /* We must set the 8390 for word mode. */
                ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
                start_page = NESM_START_PG;
                stop_page = NESM_STOP_PG;
        } else {
                start_page = NE1SM_START_PG;
                stop_page = NE1SM_STOP_PG;
        }

        /* load the mac-address from the device if this is the
         * first time we've initialised */

        if (first_init) {
                if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
                        ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
                                ei_local->mem + E8390_CMD); /* 0x61 */
                        for (i = 0; i < ETHER_ADDR_LEN; i++)
                                dev->dev_addr[i] =
                                        ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
                }

                if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
                     ax->plat->mac_addr)
                        memcpy(dev->dev_addr, ax->plat->mac_addr,
                                ETHER_ADDR_LEN);
        }

        ax_reset_8390(dev);

        ei_status.name = "AX88796";
        ei_status.tx_start_page = start_page;
        ei_status.stop_page = stop_page;
        ei_status.word16 = (ax->plat->wordlength == 2);
        ei_status.rx_start_page = start_page + TX_PAGES;

#ifdef PACKETBUF_MEMSIZE
         /* Allow the packet buffer size to be overridden by know-it-alls. */
        ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
#endif

        ei_status.reset_8390    = &ax_reset_8390;
        ei_status.block_input   = &ax_block_input;
        ei_status.block_output  = &ax_block_output;
        ei_status.get_8390_hdr  = &ax_get_8390_hdr;
        ei_status.priv = 0;

        dev->netdev_ops         = &ax_netdev_ops;
        dev->ethtool_ops        = &ax_ethtool_ops;

        ax->msg_enable          = NETIF_MSG_LINK;
        ax->mii.phy_id_mask     = 0x1f;
        ax->mii.reg_num_mask    = 0x1f;
        ax->mii.phy_id          = 0x10;         /* onboard phy */
        ax->mii.force_media     = 0;
        ax->mii.full_duplex     = 0;
        ax->mii.mdio_read       = ax_phy_read;
        ax->mii.mdio_write      = ax_phy_write;
        ax->mii.dev             = dev;

        ax_NS8390_init(dev, 0);

        if (first_init)
                dev_info(&ax->dev->dev, "%dbit, irq %d, %lx, MAC: %pM\n",
                         ei_status.word16 ? 16:8, dev->irq, dev->base_addr,
                         dev->dev_addr);

        ret = register_netdev(dev);
        if (ret)
                goto out_irq;

        return 0;

 out_irq:
        /* cleanup irq */
        free_irq(dev->irq, dev);
 err_out:
        return ret;
}

static int ax_remove(struct platform_device *_dev)
{
        struct net_device *dev = platform_get_drvdata(_dev);
        struct ax_device  *ax;

        ax = to_ax_dev(dev);

        unregister_netdev(dev);
        free_irq(dev->irq, dev);

        iounmap(ei_status.mem);
        release_resource(ax->mem);
        kfree(ax->mem);

        if (ax->map2) {
                iounmap(ax->map2);
                release_resource(ax->mem2);
                kfree(ax->mem2);
        }

        free_netdev(dev);

        return 0;
}

/* ax_probe
 *
 * This is the entry point when the platform device system uses to
 * notify us of a new device to attach to. Allocate memory, find
 * the resources and information passed, and map the necessary registers.
*/

static int ax_probe(struct platform_device *pdev)
{
        struct net_device *dev;
        struct ax_device  *ax;
        struct resource   *res;
        size_t size;
        int ret = 0;

        dev = ax__alloc_ei_netdev(sizeof(struct ax_device));
        if (dev == NULL)
                return -ENOMEM;

        /* ok, let's setup our device */
        ax = to_ax_dev(dev);

        memset(ax, 0, sizeof(struct ax_device));

        spin_lock_init(&ax->mii_lock);

        ax->dev = pdev;
        ax->plat = pdev->dev.platform_data;
        platform_set_drvdata(pdev, dev);

        ei_status.rxcr_base  = ax->plat->rcr_val;

        /* find the platform resources */

        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
        if (res == NULL) {
                dev_err(&pdev->dev, "no IRQ specified\n");
                goto exit_mem;
        }

        dev->irq = res->start;
        ax->irqflags = res->flags & IRQF_TRIGGER_MASK;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (res == NULL) {
                dev_err(&pdev->dev, "no MEM specified\n");
                ret = -ENXIO;
                goto exit_mem;
        }

        size = (res->end - res->start) + 1;

        /* setup the register offsets from either the platform data
         * or by using the size of the resource provided */

        if (ax->plat->reg_offsets)
                ei_status.reg_offset = ax->plat->reg_offsets;
        else {
                ei_status.reg_offset = ax->reg_offsets;
                for (ret = 0; ret < 0x18; ret++)
                        ax->reg_offsets[ret] = (size / 0x18) * ret;
        }

        ax->mem = request_mem_region(res->start, size, pdev->name);
        if (ax->mem == NULL) {
                dev_err(&pdev->dev, "cannot reserve registers\n");
                ret = -ENXIO;
                goto exit_mem;
        }

        ei_status.mem = ioremap(res->start, size);
        dev->base_addr = (unsigned long)ei_status.mem;

        if (ei_status.mem == NULL) {
                dev_err(&pdev->dev, "Cannot ioremap area (%08llx,%08llx)\n",
                        (unsigned long long)res->start,
                        (unsigned long long)res->end);

                ret = -ENXIO;
                goto exit_req;
        }

        /* look for reset area */

        res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
        if (res == NULL) {
                if (!ax->plat->reg_offsets) {
                        for (ret = 0; ret < 0x20; ret++)
                                ax->reg_offsets[ret] = (size / 0x20) * ret;
                }

                ax->map2 = NULL;
        } else {
                size = (res->end - res->start) + 1;

                ax->mem2 = request_mem_region(res->start, size, pdev->name);
                if (ax->mem2 == NULL) {
                        dev_err(&pdev->dev, "cannot reserve registers\n");
                        ret = -ENXIO;
                        goto exit_mem1;
                }

                ax->map2 = ioremap(res->start, size);
                if (ax->map2 == NULL) {
                        dev_err(&pdev->dev, "cannot map reset register\n");
                        ret = -ENXIO;
                        goto exit_mem2;
                }

                ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
        }

        /* got resources, now initialise and register device */

        ret = ax_init_dev(dev, 1);
        if (!ret)
                return 0;

        if (ax->map2 == NULL)
                goto exit_mem1;

        iounmap(ax->map2);

 exit_mem2:
        release_resource(ax->mem2);
        kfree(ax->mem2);

 exit_mem1:
        iounmap(ei_status.mem);

 exit_req:
        release_resource(ax->mem);
        kfree(ax->mem);

 exit_mem:
        free_netdev(dev);

        return ret;
}

/* suspend and resume */

#ifdef CONFIG_PM
static int ax_suspend(struct platform_device *dev, pm_message_t state)
{
        struct net_device *ndev = platform_get_drvdata(dev);
        struct ax_device  *ax = to_ax_dev(ndev);

        ax->resume_open = ax->running;

        netif_device_detach(ndev);
        ax_close(ndev);

        return 0;
}

static int ax_resume(struct platform_device *pdev)
{
        struct net_device *ndev = platform_get_drvdata(pdev);
        struct ax_device  *ax = to_ax_dev(ndev);

        ax_initial_setup(ndev, netdev_priv(ndev));
        ax_NS8390_init(ndev, ax->resume_open);
        netif_device_attach(ndev);

        if (ax->resume_open)
                ax_open(ndev);

        return 0;
}

#else
#define ax_suspend NULL
#define ax_resume  NULL
#endif

static struct platform_driver axdrv = {
        .driver = {
                .name           = "ax88796",
                .owner          = THIS_MODULE,
        },
        .probe          = ax_probe,
        .remove         = ax_remove,
        .suspend        = ax_suspend,
        .resume         = ax_resume,
};

static int __init axdrv_init(void)
{
        return platform_driver_register(&axdrv);
}

static void __exit axdrv_exit(void)
{
        platform_driver_unregister(&axdrv);
}

module_init(axdrv_init);
module_exit(axdrv_exit);

MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ax88796");