Staging: strip: delete the driver
[linux/fpc-iii.git] / drivers / s390 / cio / qdio.h
blob48aa0647432bb258d5ce97aa8db72a497cc2a52e
1 /*
2 * linux/drivers/s390/cio/qdio.h
4 * Copyright 2000,2009 IBM Corp.
5 * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
6 * Jan Glauber <jang@linux.vnet.ibm.com>
7 */
8 #ifndef _CIO_QDIO_H
9 #define _CIO_QDIO_H
11 #include <asm/page.h>
12 #include <asm/schid.h>
13 #include <asm/debug.h>
14 #include "chsc.h"
16 #define QDIO_BUSY_BIT_PATIENCE 100 /* 100 microseconds */
17 #define QDIO_INPUT_THRESHOLD 500 /* 500 microseconds */
20 * if an asynchronous HiperSockets queue runs full, the 10 seconds timer wait
21 * till next initiative to give transmitted skbs back to the stack is too long.
22 * Therefore polling is started in case of multicast queue is filled more
23 * than 50 percent.
25 #define QDIO_IQDIO_POLL_LVL 65 /* HS multicast queue */
27 enum qdio_irq_states {
28 QDIO_IRQ_STATE_INACTIVE,
29 QDIO_IRQ_STATE_ESTABLISHED,
30 QDIO_IRQ_STATE_ACTIVE,
31 QDIO_IRQ_STATE_STOPPED,
32 QDIO_IRQ_STATE_CLEANUP,
33 QDIO_IRQ_STATE_ERR,
34 NR_QDIO_IRQ_STATES,
37 /* used as intparm in do_IO */
38 #define QDIO_DOING_ESTABLISH 1
39 #define QDIO_DOING_ACTIVATE 2
40 #define QDIO_DOING_CLEANUP 3
42 #define SLSB_STATE_NOT_INIT 0x0
43 #define SLSB_STATE_EMPTY 0x1
44 #define SLSB_STATE_PRIMED 0x2
45 #define SLSB_STATE_HALTED 0xe
46 #define SLSB_STATE_ERROR 0xf
47 #define SLSB_TYPE_INPUT 0x0
48 #define SLSB_TYPE_OUTPUT 0x20
49 #define SLSB_OWNER_PROG 0x80
50 #define SLSB_OWNER_CU 0x40
52 #define SLSB_P_INPUT_NOT_INIT \
53 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_NOT_INIT) /* 0x80 */
54 #define SLSB_P_INPUT_ACK \
55 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x81 */
56 #define SLSB_CU_INPUT_EMPTY \
57 (SLSB_OWNER_CU | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x41 */
58 #define SLSB_P_INPUT_PRIMED \
59 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_PRIMED) /* 0x82 */
60 #define SLSB_P_INPUT_HALTED \
61 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_HALTED) /* 0x8e */
62 #define SLSB_P_INPUT_ERROR \
63 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_ERROR) /* 0x8f */
64 #define SLSB_P_OUTPUT_NOT_INIT \
65 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_NOT_INIT) /* 0xa0 */
66 #define SLSB_P_OUTPUT_EMPTY \
67 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_EMPTY) /* 0xa1 */
68 #define SLSB_CU_OUTPUT_PRIMED \
69 (SLSB_OWNER_CU | SLSB_TYPE_OUTPUT | SLSB_STATE_PRIMED) /* 0x62 */
70 #define SLSB_P_OUTPUT_HALTED \
71 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_HALTED) /* 0xae */
72 #define SLSB_P_OUTPUT_ERROR \
73 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_ERROR) /* 0xaf */
75 #define SLSB_ERROR_DURING_LOOKUP 0xff
77 /* additional CIWs returned by extended Sense-ID */
78 #define CIW_TYPE_EQUEUE 0x3 /* establish QDIO queues */
79 #define CIW_TYPE_AQUEUE 0x4 /* activate QDIO queues */
81 /* flags for st qdio sch data */
82 #define CHSC_FLAG_QDIO_CAPABILITY 0x80
83 #define CHSC_FLAG_VALIDITY 0x40
85 /* qdio adapter-characteristics-1 flag */
86 #define AC1_SIGA_INPUT_NEEDED 0x40 /* process input queues */
87 #define AC1_SIGA_OUTPUT_NEEDED 0x20 /* process output queues */
88 #define AC1_SIGA_SYNC_NEEDED 0x10 /* ask hypervisor to sync */
89 #define AC1_AUTOMATIC_SYNC_ON_THININT 0x08 /* set by hypervisor */
90 #define AC1_AUTOMATIC_SYNC_ON_OUT_PCI 0x04 /* set by hypervisor */
91 #define AC1_SC_QEBSM_AVAILABLE 0x02 /* available for subchannel */
92 #define AC1_SC_QEBSM_ENABLED 0x01 /* enabled for subchannel */
94 #ifdef CONFIG_64BIT
95 static inline int do_sqbs(u64 token, unsigned char state, int queue,
96 int *start, int *count)
98 register unsigned long _ccq asm ("0") = *count;
99 register unsigned long _token asm ("1") = token;
100 unsigned long _queuestart = ((unsigned long)queue << 32) | *start;
102 asm volatile(
103 " .insn rsy,0xeb000000008A,%1,0,0(%2)"
104 : "+d" (_ccq), "+d" (_queuestart)
105 : "d" ((unsigned long)state), "d" (_token)
106 : "memory", "cc");
107 *count = _ccq & 0xff;
108 *start = _queuestart & 0xff;
110 return (_ccq >> 32) & 0xff;
113 static inline int do_eqbs(u64 token, unsigned char *state, int queue,
114 int *start, int *count, int ack)
116 register unsigned long _ccq asm ("0") = *count;
117 register unsigned long _token asm ("1") = token;
118 unsigned long _queuestart = ((unsigned long)queue << 32) | *start;
119 unsigned long _state = (unsigned long)ack << 63;
121 asm volatile(
122 " .insn rrf,0xB99c0000,%1,%2,0,0"
123 : "+d" (_ccq), "+d" (_queuestart), "+d" (_state)
124 : "d" (_token)
125 : "memory", "cc");
126 *count = _ccq & 0xff;
127 *start = _queuestart & 0xff;
128 *state = _state & 0xff;
130 return (_ccq >> 32) & 0xff;
132 #else
133 static inline int do_sqbs(u64 token, unsigned char state, int queue,
134 int *start, int *count) { return 0; }
135 static inline int do_eqbs(u64 token, unsigned char *state, int queue,
136 int *start, int *count, int ack) { return 0; }
137 #endif /* CONFIG_64BIT */
139 struct qdio_irq;
141 struct siga_flag {
142 u8 input:1;
143 u8 output:1;
144 u8 sync:1;
145 u8 no_sync_ti:1;
146 u8 no_sync_out_ti:1;
147 u8 no_sync_out_pci:1;
148 u8:2;
149 } __attribute__ ((packed));
151 struct chsc_ssqd_area {
152 struct chsc_header request;
153 u16:10;
154 u8 ssid:2;
155 u8 fmt:4;
156 u16 first_sch;
157 u16:16;
158 u16 last_sch;
159 u32:32;
160 struct chsc_header response;
161 u32:32;
162 struct qdio_ssqd_desc qdio_ssqd;
163 } __attribute__ ((packed));
165 struct scssc_area {
166 struct chsc_header request;
167 u16 operation_code;
168 u16:16;
169 u32:32;
170 u32:32;
171 u64 summary_indicator_addr;
172 u64 subchannel_indicator_addr;
173 u32 ks:4;
174 u32 kc:4;
175 u32:21;
176 u32 isc:3;
177 u32 word_with_d_bit;
178 u32:32;
179 struct subchannel_id schid;
180 u32 reserved[1004];
181 struct chsc_header response;
182 u32:32;
183 } __attribute__ ((packed));
185 struct qdio_dev_perf_stat {
186 unsigned int adapter_int;
187 unsigned int qdio_int;
188 unsigned int pci_request_int;
190 unsigned int tasklet_inbound;
191 unsigned int tasklet_inbound_resched;
192 unsigned int tasklet_inbound_resched2;
193 unsigned int tasklet_outbound;
195 unsigned int siga_read;
196 unsigned int siga_write;
197 unsigned int siga_sync;
199 unsigned int inbound_call;
200 unsigned int inbound_handler;
201 unsigned int stop_polling;
202 unsigned int inbound_queue_full;
203 unsigned int outbound_call;
204 unsigned int outbound_handler;
205 unsigned int fast_requeue;
206 unsigned int target_full;
207 unsigned int eqbs;
208 unsigned int eqbs_partial;
209 unsigned int sqbs;
210 unsigned int sqbs_partial;
211 } ____cacheline_aligned;
213 struct qdio_queue_perf_stat {
215 * Sorted into order-2 buckets: 1, 2-3, 4-7, ... 64-127, 128.
216 * Since max. 127 SBALs are scanned reuse entry for 128 as queue full
217 * aka 127 SBALs found.
219 unsigned int nr_sbals[8];
220 unsigned int nr_sbal_error;
221 unsigned int nr_sbal_nop;
222 unsigned int nr_sbal_total;
225 struct qdio_input_q {
226 /* input buffer acknowledgement flag */
227 int polling;
228 /* first ACK'ed buffer */
229 int ack_start;
230 /* how much sbals are acknowledged with qebsm */
231 int ack_count;
232 /* last time of noticing incoming data */
233 u64 timestamp;
236 struct qdio_output_q {
237 /* PCIs are enabled for the queue */
238 int pci_out_enabled;
239 /* IQDIO: output multiple buffers (enhanced SIGA) */
240 int use_enh_siga;
241 /* timer to check for more outbound work */
242 struct timer_list timer;
246 * Note on cache alignment: grouped slsb and write mostly data at the beginning
247 * sbal[] is read-only and starts on a new cacheline followed by read mostly.
249 struct qdio_q {
250 struct slsb slsb;
252 union {
253 struct qdio_input_q in;
254 struct qdio_output_q out;
255 } u;
258 * inbound: next buffer the program should check for
259 * outbound: next buffer to check if adapter processed it
261 int first_to_check;
263 /* first_to_check of the last time */
264 int last_move;
266 /* beginning position for calling the program */
267 int first_to_kick;
269 /* number of buffers in use by the adapter */
270 atomic_t nr_buf_used;
272 /* error condition during a data transfer */
273 unsigned int qdio_error;
275 struct tasklet_struct tasklet;
276 struct qdio_queue_perf_stat q_stats;
278 struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q] ____cacheline_aligned;
280 /* queue number */
281 int nr;
283 /* bitmask of queue number */
284 int mask;
286 /* input or output queue */
287 int is_input_q;
289 /* list of thinint input queues */
290 struct list_head entry;
292 /* upper-layer program handler */
293 qdio_handler_t (*handler);
295 struct dentry *debugfs_q;
296 struct qdio_irq *irq_ptr;
297 struct sl *sl;
299 * Warning: Leave this member at the end so it won't be cleared in
300 * qdio_fill_qs. A page is allocated under this pointer and used for
301 * slib and sl. slib is 2048 bytes big and sl points to offset
302 * PAGE_SIZE / 2.
304 struct slib *slib;
305 } __attribute__ ((aligned(256)));
307 struct qdio_irq {
308 struct qib qib;
309 u32 *dsci; /* address of device state change indicator */
310 struct ccw_device *cdev;
311 struct dentry *debugfs_dev;
312 struct dentry *debugfs_perf;
314 unsigned long int_parm;
315 struct subchannel_id schid;
316 unsigned long sch_token; /* QEBSM facility */
318 enum qdio_irq_states state;
320 struct siga_flag siga_flag; /* siga sync information from qdioac */
322 int nr_input_qs;
323 int nr_output_qs;
325 struct ccw1 ccw;
326 struct ciw equeue;
327 struct ciw aqueue;
329 struct qdio_ssqd_desc ssqd_desc;
330 void (*orig_handler) (struct ccw_device *, unsigned long, struct irb *);
332 int perf_stat_enabled;
334 struct qdr *qdr;
335 unsigned long chsc_page;
337 struct qdio_q *input_qs[QDIO_MAX_QUEUES_PER_IRQ];
338 struct qdio_q *output_qs[QDIO_MAX_QUEUES_PER_IRQ];
340 debug_info_t *debug_area;
341 struct mutex setup_mutex;
342 struct qdio_dev_perf_stat perf_stat;
345 /* helper functions */
346 #define queue_type(q) q->irq_ptr->qib.qfmt
347 #define SCH_NO(q) (q->irq_ptr->schid.sch_no)
349 #define is_thinint_irq(irq) \
350 (irq->qib.qfmt == QDIO_IQDIO_QFMT || \
351 css_general_characteristics.aif_osa)
353 #define qperf(__qdev, __attr) ((__qdev)->perf_stat.(__attr))
355 #define qperf_inc(__q, __attr) \
356 ({ \
357 struct qdio_irq *qdev = (__q)->irq_ptr; \
358 if (qdev->perf_stat_enabled) \
359 (qdev->perf_stat.__attr)++; \
362 static inline void account_sbals_error(struct qdio_q *q, int count)
364 q->q_stats.nr_sbal_error += count;
365 q->q_stats.nr_sbal_total += count;
368 /* the highest iqdio queue is used for multicast */
369 static inline int multicast_outbound(struct qdio_q *q)
371 return (q->irq_ptr->nr_output_qs > 1) &&
372 (q->nr == q->irq_ptr->nr_output_qs - 1);
375 static inline unsigned long long get_usecs(void)
377 return monotonic_clock() >> 12;
380 #define pci_out_supported(q) \
381 (q->irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)
382 #define is_qebsm(q) (q->irq_ptr->sch_token != 0)
384 #define need_siga_sync_thinint(q) (!q->irq_ptr->siga_flag.no_sync_ti)
385 #define need_siga_sync_out_thinint(q) (!q->irq_ptr->siga_flag.no_sync_out_ti)
386 #define need_siga_in(q) (q->irq_ptr->siga_flag.input)
387 #define need_siga_out(q) (q->irq_ptr->siga_flag.output)
388 #define need_siga_sync(q) (q->irq_ptr->siga_flag.sync)
389 #define siga_syncs_out_pci(q) (q->irq_ptr->siga_flag.no_sync_out_pci)
391 #define for_each_input_queue(irq_ptr, q, i) \
392 for (i = 0, q = irq_ptr->input_qs[0]; \
393 i < irq_ptr->nr_input_qs; \
394 q = irq_ptr->input_qs[++i])
395 #define for_each_output_queue(irq_ptr, q, i) \
396 for (i = 0, q = irq_ptr->output_qs[0]; \
397 i < irq_ptr->nr_output_qs; \
398 q = irq_ptr->output_qs[++i])
400 #define prev_buf(bufnr) \
401 ((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK)
402 #define next_buf(bufnr) \
403 ((bufnr + 1) & QDIO_MAX_BUFFERS_MASK)
404 #define add_buf(bufnr, inc) \
405 ((bufnr + inc) & QDIO_MAX_BUFFERS_MASK)
406 #define sub_buf(bufnr, dec) \
407 ((bufnr - dec) & QDIO_MAX_BUFFERS_MASK)
409 /* prototypes for thin interrupt */
410 void qdio_setup_thinint(struct qdio_irq *irq_ptr);
411 int qdio_establish_thinint(struct qdio_irq *irq_ptr);
412 void qdio_shutdown_thinint(struct qdio_irq *irq_ptr);
413 void tiqdio_add_input_queues(struct qdio_irq *irq_ptr);
414 void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr);
415 void tiqdio_inbound_processing(unsigned long q);
416 int tiqdio_allocate_memory(void);
417 void tiqdio_free_memory(void);
418 int tiqdio_register_thinints(void);
419 void tiqdio_unregister_thinints(void);
421 /* prototypes for setup */
422 void qdio_inbound_processing(unsigned long data);
423 void qdio_outbound_processing(unsigned long data);
424 void qdio_outbound_timer(unsigned long data);
425 void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
426 struct irb *irb);
427 int qdio_allocate_qs(struct qdio_irq *irq_ptr, int nr_input_qs,
428 int nr_output_qs);
429 void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr);
430 int qdio_setup_get_ssqd(struct qdio_irq *irq_ptr,
431 struct subchannel_id *schid,
432 struct qdio_ssqd_desc *data);
433 int qdio_setup_irq(struct qdio_initialize *init_data);
434 void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
435 struct ccw_device *cdev);
436 void qdio_release_memory(struct qdio_irq *irq_ptr);
437 int qdio_setup_create_sysfs(struct ccw_device *cdev);
438 void qdio_setup_destroy_sysfs(struct ccw_device *cdev);
439 int qdio_setup_init(void);
440 void qdio_setup_exit(void);
442 int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
443 unsigned char *state);
444 #endif /* _CIO_QDIO_H */